Groupwise 7 web client is replacing equals sign with hyphen
Howdy,
The Groupwise web client rewrites links, breaking examples such as
http://somewhere.com/user/confirm.php?code=3d6
where the crucial = is changed to a -. It's fine to follow this link, it's an expired code, and it should report it a such. Clicking on it from the GW web client, though, changes the equals sign, and the page should report "No code found" instead.
anyone seen this? has the issue been resolved?
djbii,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Similar Messages
-
How to select from multiple addresses of account in IC Web Client
Hi all,
We are implementing a B2C scenario for IC Web Client. We have customers with multiple addresses. However, when we search the acount, only standard address comes to screen. We want to be able select the related address, and then confirm the acount with that address.
Is there any way to customize the Web Client in order to be able to select from multiple addresses of the acount?
Thanks in advance.
Edited by: Danisman Danisman on Aug 31, 2010 2:52 PMThanks for the answer. Yes, we are using 7.0 but in the account identification screen, there is no personalize button ( I assume you are suggesting adding an addres block by using that button, right?).
We checked the necessary customizing : there is an entry for fucntional profile PERSONALIZATION : ALL_ENABLED.
Should we do something else to show the button?
Thanks again. -
Replacing a Sign on a Building - Motion Tracking Questions...
First off, I should mention that I'm using AE CS3.
I have a shot of a basic zoom in on a building with a rectangular sign. The sign isn't shot straight on, so it's at an angle, but you can see all four corners.
I'm trying to replace the sign with a new one, so I figured I would have to motion track the 4 corners of the sign.
I haven't done a track like this before and I was wondering if anyone could help me out with:
1. How should I track this shot?
2. Should I apply the track to a null object?
3. I have the new sign as a pre-comp - how can I get the new sign to scale in accordingly as the camera zooms in on it?
Does anyone know of any tutorials or videos that show how to accomplish this task with CS3's motion tracking capabilities?
Thanks
FoochuckSee my answer on VideoCopilot. And please do not open multiple identical threads on different forums. It only makes it harder for everyone to keep track and get the proper answers.
Mylenium -
Alerts and reminder profiles in IC Web client
Hi all,
We are working on CRM 2007. Can we maintain alert and reminders in the IC Web client.
If yes, where can we maintain them?
I dont see any path in IMG to maintain those settings?
Please give me some inputs on this...
Points will be awarded liberally.
Thanks in advance,
RKSome more info which I got from one of my raised questions:-
In CRM 2006s and CRM 2007, the Alert Modeler (IMG configuration based on IC events and parameters) has been replaced by the Alert Editor. You can now create re-usable alerts complete with navigation target (hyperlinks), tooltips, and variables.
You access the Alert Editor via the IC_MANAGER business role under the menu option Process Modeling - > (Create) Alert
After you save the alert, you can create a rule using the Rule Modeler to trigger the alert. As mentioned by others, you use the Rule Modeler context "Intent-Driven Interaction".
You need to assign your CRM business role to the Rule Policy Details node of the rule policy. You also need to declare any events you will plan to use in your rule.
When you create a rule, the rule must start with the condition "if current event equals your event". Optionally you can add additiona conditions, such as "if BP status equals..."
In your rule, you use the action "trigger alert" and provide the ID of the alert you created.
As mentioned, in CRM 2006s and CRM 2007, no out of the box default alerts are provided. -
DataProcessor generating XML containing special ampersand, equals sign etc
Hi,
Using 10.1.3.3.3
I am using the BIP API's to generate reports for an application, but have a problem where the DataProcessor is generating XML containing ampersands and equal signs '&', '=' from the database.
The characters are causing the FOProcessor to throw and exception when reading the generated XML:
oracle.xml.parser.v2.XMLParseException: Expected name instead of .
08/08/06 12:12:22 at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
If I remove the '&' and '=' the PDF is generated successfully.
It is not pratical to convert these characters as part of the queries (40+ tables times x columns).
Is there anything I can put in the data template or config to get it to properly escape these characters when generating in the XML data?
Apologies if this has been answered in another thread.
BrendenYou must replace '&' by &
'=' work fine.
look here for additional character encoding
http://llizard.etherwork.net/cwc/charactmap.html
Skobelev Max -
Hi ,
I am getting an FRM-92150:WEB client version too new...
I have cleared all cache Jar files in control Panel. But I am getting same Error......
Please tell me a better solution to resolve the issue....
Thanks in Advance.hi
try something like this i hope it helps u.
Set the proper ORACLE_HOME / bin in the beginning of the system path.
The CODEBASE entry in your HTML file or forms configuration file may point The CODEBASE entry in your HTML file or forms configuration file may point
to older versions of the JAR file.. Either modify the codebase entry in your
configuration file or replace the jar file in the codebase path with the appropriate jar configuration file.
sarah -
Hi,
I recently installed Oracle Hyperion Data Relationship Management, Fusion Edition.
Ive created a new application and repository using the management console succesfully, however when I try to run the Web Client, I get:
--------================================
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Diagnose Connection Problems
More information =============================-------------
The url generated is http://localhost/drm-web-client
I am running on windows 7, 64bit and XP respectively with the same results.
Regards,
OluIt sounds like you are trying to access the file as if your JNLP application were running on the server. The JNLP app is running on the client machine, so you will need to use a URL to open the file. Take a look at the JavaDocs for the following:
java.net.URL
java.net.URI
java.net.File
You also need to be sure your server is configured to serve the file. For example, you ought to be able to access the file through your browser using something like http://www.myco.com/myapp/myfile.txt. (How you configure your server is a topic for a different forum.)
You probably also want to look into JavaWS security, and even Java security in general to determine if you need to sign your app or not. Here are some links to get you started:
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/development.html#security
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/security.html
http://java.sun.com/sfaq/
http://java.sun.com/j2se/1.5.0/docs/guide/security/permissions.html
http://java.sun.com/j2se/1.5.0/docs/guide/security/index.html
Mike. -
DRM Web Client 500.19 issue on windows 2008(x64) ERROR
Hi,
I installed DRM version 11.1.2 on windows server 2008(x64), according to the documents, I pre-installed .Net 3.5.1 and modified the applicationHost.conf file.
I found this in epm_install_troubleshooting
Web Client Access Failure
Issue: After installing Data Relationship Management on Windows 2008 64-bit platform, you
get this error message when attempting to access the Web client:
HTTP Error 500.19 - Internal Server Error The requested page cannot be
accessed because the related configuration data for the page is invalid.
Solution: In the IIS configuration file (C:/Windows/System32/inetsrv/config/
applicationHost.config), replace the two occurrences of Deny in the following section with
Allow:
<configuration>
<configSections>
<sectionGroup name="system.webServer">
<section name="handlers" overrideModeDefault="Deny" />
<name="modules" allowDefinition="MachineToApplication"
overrideModeDefault="Deny" />
However when I access the web client I got the 500.19 error, can't find C:\inetpub\wwwroot\drm-web-client\web.config, the web.config file do not exist.
Config File \\?\C:\inetpub\wwwroot\drm-web-client\web.configMight be too late, but the problem is that IIS is pointing to the incorrect path. Should not be pointing to C:\Inetpub\wwwrooot\.... it should be pointing to Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\web-client same thing with the migration-client IIS app. To fix use the IIS Manager click the drm-web-client virtual directory and select "Advanced Settings" and update the "Physical Path" property.
Pablo -
DRM Web Client 500.19 issue on windows 2008(x64)
Hi guys,
I installed DRM version 11.1.2 on windows server 2008(x64), according to the documents, I pre-installed .Net 3.5.1 and modified the applicationHost.conf file. The installation is successful without error. However when I access the web client I got the 500.19 error, can't find C:\inetpub\wwwroot\drm-web-client\web.config, the web.config file do not exist.
I guess this is something about IIS configuration but I'm not familiar with IIS, can anybody give me some suggestion?
ThanksI found this in epm_install_troubleshooting
Web Client Access Failure
Issue: After installing Data Relationship Management on Windows 2008 64-bit platform, you
get this error message when attempting to access the Web client:
HTTP Error 500.19 - Internal Server Error The requested page cannot be
accessed because the related configuration data for the page is invalid.
Solution: In the IIS configuration file (C:/Windows/System32/inetsrv/config/
applicationHost.config), replace the two occurrences of Deny in the following section with
Allow:
<configuration>
<configSections>
<sectionGroup name="system.webServer">
<section name="handlers" overrideModeDefault="Deny" />
<name="modules" allowDefinition="MachineToApplication"
overrideModeDefault="Deny" /> -
Custom profiles in IC Web client terminate in XSLT error 'unexpected EOF'
Hello,
we've upgraded from CRM 4.0 SP7 to CRM2005 (i.e. CRM 5.0) SP7.
The IC web client is not able to start our custom web client profiles. However, SAP's default profile is OK.
When launching via transaction CRM_IC or SE80 and default.htm, the window opens up, but if we use one of the custom IC Web client profiles, the application won't load correctly. It only displays the logos and the clipboard, then gives the error message:
The runtime repository could not be interpreted. An XSLT transformation error occurred.
Reason: Unexpected end-of-file.
Transformation: BSP_WD_RT_REP_RUNTIME
I've checked the customization, and I find no errors. All function profiles (XML files) from 4.0 have been migrated correctly into 5.0 customization tables.
The custom profile launches our BSP application Z_CRM_IC, which is a copy of the standard BSP with a few controller replacements. The corresponding runtime framework profile calls the repository Z_CRM_IC_RT_REP, which is also a copy of the original.
When I check the repository Z_CRM_IC_RT_REP in SE80, the system displays the error
BSP Application Z_CRM_IC_RT_REP,BSP Page CRM_IC.XM
The included page "CRM_IC_All_Viewsets_wo_BUPA_and_Main.xml" is created in language "ABAP".
However, I don't think that's really an error, because the include merely points to the standard xml file
../CRM_IC_DT_REP/CRM_IC_All_Viewsets_wo_BUPA_and_Main.xml
and when I run a check on that, the workbench finds no errors.
Any idea on how to get the IC Web client up and running again?
Regards,
ArtoNote 880180 seems to help.
After making the suggested changes, I ran into another translation error, but that's a different story... -
Adding new search field in IC web client
Hi experts,
I need to add two search fields search term1 and search term2 in IC web client for the view 'search for Employees' as that is present in GUI with transaction BP.Please send me step by step details how to do that.
Thanks in advance
KoustavHi Koustav,
If you have added an append to the BuilEmpSearch BOL object, than the parameters are added to the query_service automaticaly.
Here is an example of the eh_OnSearch method for the search on business partners. (B2C scenario). The principle is the same. You can add you pre-search checks here. Don't fire the query before all required data is in the query_search object. (standard all parameters from the BuilEmpSearch object are in there).
METHOD eh_onsearch .
* 2. Business Partner Search
lv_wrapper = typed_context->SearchCustomer->get_collection_wrapper( ).
query_service ?= lv_wrapper->get_current( ).
lv_country =
query_service->IF_BOL_BO_PROPERTY_ACCESS~GET_PROPERTY_AS_STRING( 'COUNTRY' ).
IF NOT lv_country IS INITIAL.
CALL METHOD query_service->if_bol_bo_property_access~set_property
EXPORTING
iv_attr_name = 'COUNTRY_FOR_TEL'
iv_value = lv_country.
ENDIF.
* MVNI(EX00885)21022006: Begin of Insert
lv_firstname =
query_service->IF_BOL_BO_PROPERTY_ACCESS~GET_PROPERTY_AS_STRING( 'MC_NAME2' ).
lv_lastname =
query_service->IF_BOL_BO_PROPERTY_ACCESS~GET_PROPERTY_AS_STRING( 'MC_NAME1' ).
lv_insz =
query_service->IF_BOL_BO_PROPERTY_ACCESS~GET_PROPERTY_AS_STRING( 'ZZINSZ' ).
lv_birthdate =
query_service->IF_BOL_BO_PROPERTY_ACCESS~GET_PROPERTY_AS_STRING( 'ZBIRTHDATE' ).
replace all occurrences of '.' in lv_insz with ''.
replace all occurrences of '-' in lv_insz with ''.
condense lv_insz no-gaps.
* MVNI(EX00885)21022006: End of Insert
* check customizing for role
IF NOT ls_profile-customer_role IS INITIAL.
CALL METHOD query_service->if_bol_bo_property_access~set_property
EXPORTING
iv_attr_name = 'ROLE'
iv_value = ls_profile-customer_role.
ENDIF.
* limit search to maximum number of hits.
CALL METHOD query_service->if_bol_bo_property_access~set_property
EXPORTING
iv_attr_name = 'MAX_HIT'
iv_value = lv_bupacontroller->max_hits.
* fire query
TRY.
bo_col ?= query_service->get_query_result( ).
CATCH cx_sy_ref_is_initial.
ENDTRY.
entity_col ?= bo_col.
* set result into context
typed_context->customers->set_collection( entity_col ).
* navigate
IF entity_col->if_bol_bo_col~size( ) EQ 1.
op_showbupa( ).
ELSEIF entity_col->if_bol_bo_col~size( ) GT 1.
op_listcustomers( ).
if entity_col->if_bol_bo_col~size( ) eq lv_bupacontroller->max_hits.
lv_msgsrv = cl_bsp_wd_message_service=>get_instance( ).
lv_max_hit = lv_bupacontroller->MAX_HITS .
lv_msgsrv->add_message( iv_msg_type = 'I'
iv_msg_id = 'CRM_IC_APPL_UI_BPID'
iv_msg_number = '009'
IV_MSG_V1 = lv_max_hit ).
endif.
ELSE.
lv_msgsrv = cl_bsp_wd_message_service=>get_instance( ).
lv_msgsrv->add_message( iv_msg_type = 'I'
iv_msg_id = 'CRM_IC_APPL_UI_BPID'
iv_msg_number = '011' ).
* clear result list
view_manager->navigate(
SOURCE_REP_VIEW = rep_view
OUTBOUND_PLUG = 'showEmpty' ).
ENDIF.
ENDMETHOD.
In the class CL_BUIL_EMP (which has the superclass CL_BUIL_HEADER) you need to do a repair (changing of a standard SAP class) of method get_result_table.
What I have done is I've read the parameters that were added (automatically) to the query_service and added them to my FM to do the search.
You also need to take a copy of the BUPA_SEARCH_2 FM and add the parameters as importing parameters. Now you can add your search logic to the FM.
Here is the coding of the GET_RESULTS_TABLE:
METHOD get_result_table.
* CHANGES BY MVNI ON 03/07/2007.
* MARKER: MVNI(EX00885)03072007
* REASON: SPAU Upgrade 5.0.
* CHANGES BY MVNI ON 12/02/2008.
* MARKER: MVNI(EX00885)12022008
* REASON: CLM
DATA: ls_header_search TYPE crmst_header_search_buil,
lv_mc_name1 TYPE bu_mcname1,
lv_mc_name2 TYPE bu_mcname2,
ls_address TYPE bupa_addr_search,
ls_fax_data TYPE bapibus1006_fax_data,
lt_return TYPE TABLE OF bapiret2,
lv_xaddrversion TYPE abap_bool,
lv_no_hits TYPE i.
DATA: lt_but100 TYPE TABLE OF but100.
DATA: lv_role_category TYPE bu_role.
FIELD-SYMBOLS: <fs_result> LIKE LINE OF et_bupa_search_result.
* MVNI(EX00885)03072007: Begin of Insert
DATA: iv_birthdate TYPE bu_birthdt,
iv_insz TYPE ZBU_00000000,
lv_insz(15) TYPE c,
lv_bednr(15) TYPE c,
lv_vestnr(15) TYPE c,
ls_parameters TYPE crmt_name_value_pair.
* MVNI(EX00885)03072007: End of Insert
* MVNI(EX00885)03072007: Begin of Insert
CONSTANTS: C_IDENTIFICATIONTYPE TYPE BU_ID_TYPE VALUE 'ZINSZ'.
* MVNI(EX00885)03072007: End of Insert
* define structure we use for input parameters
MOVE-CORRESPONDING is_parameters TO ls_header_search.
MOVE-CORRESPONDING is_parameters TO ls_address.
MOVE-CORRESPONDING is_parameters TO ls_fax_data.
IF ls_header_search-fax IS NOT INITIAL.
IF ls_fax_data-country_for_fax IS NOT INITIAL.
ls_fax_data-fax_no = ls_header_search-fax.
ELSE.
ls_fax_data-fax_no = ls_header_search-fax.
ls_fax_data-country_for_fax = ls_header_search-country.
ENDIF.
ENDIF.
lv_mc_name1 = ls_header_search-mc_name1.
lv_mc_name2 = ls_header_search-mc_name2.
** MVNI(EX00885)03072007: Begin of Replace
* LOOP AT is_parameters INTO ls_parameters.
* ENDLOOP.
* ls_parameters-name = 'BIRTHDATE'.
* MOVE ls_parameters-value TO iv_birthdate.
* ELSEIF ls_parameters-name = 'ZZINSZ'.
* MOVE ls_parameters-value TO iv_insz.
* endif.
* Remove all allowed non-digits
lv_insz = ls_header_search-zzinsz.
replace all occurrences of '.' in lv_insz with space.
replace all occurrences of '-' in lv_insz with space.
condense lv_insz no-gaps.
ls_header_search-zzinsz = lv_insz.
* MVNI(EX00885)03072007: End of Replace
* MVNI(EX00885)12022008: Begin of insert
lv_bednr = ls_header_search-zzbednr.
replace all occurrences of '.' in lv_bednr with space.
replace all occurrences of '-' in lv_bednr with space.
condense lv_bednr no-gaps.
ls_header_search-zzbednr = lv_bednr.
lv_vestnr = ls_header_search-zzvestnr.
replace all occurrences of '.' in lv_vestnr with space.
replace all occurrences of '-' in lv_vestnr with space.
condense lv_vestnr no-gaps.
ls_header_search-zzvestnr = lv_vestnr.
* MVNI(EX00885)12022008: End of insert
* check if international address versions are active:
IF address_version_id IS INITIAL.
CALL METHOD check_for_int_add_versions( ).
ENDIF.
* check for customizing in IC WebClient
IF ls_header_search-no_trex IS INITIAL.
ls_header_search-no_trex = cl_crm_buil_services=>check_for_trex( ).
ENDIF.
CLASS crm_saf_get_settings DEFINITION LOAD.
IF NOT address_version_id IS INITIAL.
lv_xaddrversion = abap_true.
ENDIF.
* Optimization for combined search, Refer note 962864
IF ls_address-country IS NOT INITIAL
AND ls_address-city1 IS INITIAL
AND ls_address-post_code1 IS INITIAL
AND ls_address-region IS INITIAL
AND ls_address-street IS INITIAL
AND ls_address-house_num1 IS INITIAL.
IF ls_header_search-telephone IS NOT INITIAL OR
ls_header_search-email IS NOT INITIAL.
CLEAR ls_address-country.
ENDIF.
IF ls_header_search-email IS NOT INITIAL.
CLEAR ls_header_search-country_for_tel.
ENDIF.
IF ls_fax_data-fax_no IS INITIAL.
CLEAR ls_fax_data-country_for_fax.
ENDIF.
ENDIF.
* MVNI(EX00885)03072007: Begin of Replace
* CALL FUNCTION 'TREX_BUPA_SEARCH'
* EXPORTING
* iv_application = crm_saf_get_settings=>gc_app_name_bp
* iv_telephone = ls_header_search-telephone
* iv_email = ls_header_search-email
* iv_url = ls_header_search-url
* is_address = ls_address
* iv_mc_name1 = lv_mc_name1
* iv_mc_name2 = lv_mc_name2
* iv_fax_data = ls_fax_data
* iv_partner = ls_header_search-partner
* iv_partnerrole = ls_header_search-role
* iv_country_for_tel = ls_header_search-country_for_tel
* iv_category = ls_header_search-category
* iv_max_partners = ls_header_search-max_hit
* iv_xaddrversion = lv_xaddrversion
* iv_not_trex = ls_header_search-no_trex
* TABLES
* et_search_result = et_bupa_search_result
* et_return = lt_return.
* MVNI(EX00885)12022008: Begin of insert
CALL FUNCTION 'ZBUPA_SEARCH_2'
EXPORTING
IV_TELEPHONE = ls_header_search-telephone
IV_EMAIL = ls_header_search-email
IV_URL = ls_header_search-url
IS_ADDRESS = ls_address
IV_MC_NAME1 = lv_mc_name1
IV_MC_NAME2 = lv_mc_name2
IV_PARTNER = ls_header_search-partner
IV_PARTNERROLE = ls_header_search-role
* IV_X_ALL_PARTNERROLES =
* IV_PARTNERROLE =
* IV_SORT1 =
* IV_SORT2 =
* IV_COUNTRY_FOR_TEL =
* IV_CATEGORY =
IV_FAX_DATA = ls_fax_data
IV_XADDRVERSION = lv_xaddrversion
IV_MAX_PARTNERS = ls_header_search-max_hit
* IV_NATION_VERS =
* IV_OLD_ROLE_PROCESS =
* IV_NO_SEARCH_FOR_CONTP =
* IV_VALID_DATE = SY-DATLO
* IV_TIME_INDEPENDENT =
IV_RRNR = ls_header_search-zzinsz
IV_BIRTHDATE = ls_header_search-zbirthdate
IV_BEDNR = ls_header_search-zzbednr
IV_VESTNR = ls_header_search-zzvestnr
TABLES
ET_SEARCH_RESULT = et_bupa_search_result
ET_RETURN = lt_return.
* MVNI(EX00885)12022008: End of insert
* MVNI(EX00885)12022008: Begin of delete
* CALL FUNCTION 'ZBUPA_SEARCH'
* EXPORTING
* IV_TELEPHONE = ls_header_search-telephone
* IV_EMAIL = ls_header_search-email
* IV_URL = ls_header_search-url
* IS_ADDRESS = ls_address
* IV_MC_NAME1 = lv_mc_name1
* IV_MC_NAME2 = lv_mc_name2
* IV_PARTNER = ls_header_search-partner
* IV_PARTNERROLE = ls_header_search-role
* IV_SORT1 =
* IV_SORT2 =
* IV_COUNTRY_FOR_TEL =
* IV_CATEGORY =
* IV_FAX_DATA = ls_fax_data
* IV_XADDRVERSION = 'X'
* IV_MAX_PARTNERS = '50'
* IV_NATION_VERS =
* IV_NO_SEARCH_FOR_CONTP =
* IV_BIRTHDATE = ls_header_search-zbirthdate
* IV_INSZ = ls_header_search-zzinsz
* TABLES
* ET_SEARCH_RESULT = et_bupa_search_result
* ET_RETURN = lt_return.
* MVNI(EX00885)03072007: End of Replace
* MVNI(EX00885)12022008: End of delete
IF lt_return IS NOT INITIAL.
* no error handling
ENDIF.
* filter out real employees if role is not 'Employee'
* (and if category is not specified)
IF NOT et_bupa_search_result[] IS INITIAL
AND ls_header_search-category IS INITIAL
AND NOT ls_header_search-role IS INITIAL.
* function module has a buffer
CALL FUNCTION 'BUCP_EMPLOYEE_ROLE_GET'
IMPORTING
e_employee_role = lv_role_category.
IF NOT ls_header_search-role EQ lv_role_category.
SELECT * FROM but100 INTO TABLE lt_but100
FOR ALL ENTRIES IN et_bupa_search_result
WHERE partner = et_bupa_search_result-partner
ORDER BY PRIMARY KEY.
LOOP AT et_bupa_search_result ASSIGNING <fs_result>.
READ TABLE lt_but100 WITH KEY partner = <fs_result>-partner
TRANSPORTING NO FIELDS
BINARY SEARCH.
IF sy-subrc NE 0.
CONTINUE.
ENDIF.
DELETE lt_but100 WHERE partner = <fs_result>-partner
AND rltyp = lv_role_category.
READ TABLE lt_but100 WITH KEY partner = <fs_result>-partner
TRANSPORTING NO FIELDS
BINARY SEARCH.
IF sy-subrc NE 0.
DELETE et_bupa_search_result.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
* if TREX is disabled and addressversions are active -> MAX_HIT does not work
* workaround:
DESCRIBE TABLE et_bupa_search_result LINES lv_no_hits.
IF lv_no_hits GT ls_header_search-max_hit.
ev_max_hits = ls_header_search-max_hit.
ENDIF.
ENDMETHOD.
Hope this helps!
Kind regards,
Micha -
GroupWise 8 Web Services Documentation
We are in the process of updating the GroupWise 8 Web Services documentation. Until the GroupWise 8 changes have been merged into the current GroupWise 7 documentation, we thought it would be good to give you the updates for GroupWise 8.
You will find this update at: ftp://ftp.novell.com/outgoing/GW8WS.zip
Files or directories of interest:
GW8 - SOAP Documentation.pdf - Changes from GroupWise 7 to GroupWise 8.
WSDL and schemas\GW8 - GroupWise 8 WSDL and schemas
clients\Java\JAX-WS - Sample client of latest Java technology for Web Services
800\WSDL and schemas\GW8\Differences - GW703 and GW8 - Schema differences between GW7 and GW8
Missing at this time:
- Documentation on WSDL and schemas\GW8\archive.wsdl
Let me know if you have questions, comments, or suggestions.
Tim Draper
GroupWise DevelopmentHere is a response about the availability of the documentation:
The documentation is currently posted here:
http://developer.novell.com/document...a/bktitle.html
We're currently working with Richard Smith to get a link to this page from
Novell Developer Kit page
(http://developer.novell.com/wiki/ind..._Developer_Kit)
Hope that helps.
-Luke
>>> On Tuesday, January 05, 2010 at 4:29 AM, Preston
Stephenson<[email protected]> wrote:
> Sorry, the documentation went to a new writer.
> I'm try to track down the status of the document.
>
>>>> On Monday, January 04, 2010 at 7:26 AM,
> ecmwise<ecmwise@no‑mx.forums.novell.com> wrote:
>
>>>> Documentation on WSDL and schemas\GW8\archive.wsdl
>>
>> Is the documentation for archive.wsdl and archivexsd. now available?
>>
>> Best regards
>> Gregor -
I'm attempting to access my work email through Microsoft Outlook web client. The URL is mail.ad.msu.edu. I get the following message:
The website "mail.ad.msu.edu" requires a client certificate.
This website requires a certificate to validate your identity. Select the certificate to use when you connect to this website, then click Continue.
The choice I am presented with is: adp3d (iChat Encryption Certificate) (Apple.Mac Certificate Authority)
I'm thinking that this can't be correct, and in fact doesn't allow me to signing to the website.
How do I go about getting the proper certificate?I'm attempting to access my work email through Microsoft Outlook web client. The URL is mail.ad.msu.edu. I get the following message:
The website "mail.ad.msu.edu" requires a client certificate.
This website requires a certificate to validate your identity. Select the certificate to use when you connect to this website, then click Continue.
The choice I am presented with is: adp3d (iChat Encryption Certificate) (Apple.Mac Certificate Authority)
I'm thinking that this can't be correct, and in fact doesn't allow me to signing to the website.
How do I go about getting the proper certificate? -
Difference Betn Web Client & Win Client???
Dear all,
I know the Web Client and Win Client. But i want to know the exact difference between them?
And Why and When We are using Web Client and Win Client and Which type of industries.
If any body have real time documents for using it pls forwad to me.
Can anybody explaing briefly.
Thanks in advance
JayeshThese are the Main Difference between Web Client And win Client:
1.When it comes to the technology, the WebClient is based on BSP (business server pages), which are generated by the SAP Web Application Server and creates HTML pages so that all the agent needs is a browser. In contrast, the WinClient is basd on ABAP Dynpro technology and requires a installation of a SAPGUI on the agent machine or a terminal server.
2.In the area of multi-channel-integration, WebClient currently uses the ICI/BCB interface whereas IC WinClient uses SAPphone. Customers that have a SAPphone based integration up and running will be able to reuse this integration with IC WebClient. ICI/BCB based integration will be made available for IC WinClient customers with the 2005 CRM release.
3.One important difference is the general approach towards UI design. In the WebClient you will find specialized, optimized user interfaces for a specfic subset of business processes. The WinClient will let you reuse any business process objects from CRM online.
4.When it comes to integrate into other applications or user interfaces the WebClient can use any people centric UI (PCC UI) view (the CRM browser based user interface) or use WebGUI (aka SAPGUI for HTML) for R/3 (or other 4.6C/D basis based onwards systems) to render HTML. WinClient can easily integrate into any other SAPGui based application.
5.ICWEB Client support the auto suggestion of solutions
6.ICWEB Client has the functionality to replace views, add more fields with in the views.
7.Like win Clients web client doesnt support the reminder scripts but it provides the similar functionality with the help of Alerts
Following are the new eddition in web client :
<i><b>My Worklist</b></i>To-do items for an agent (sales and service items, business activities, tasks)
<i><b>Navigation bar</b></i>
Browser-type navigation
<i><b>Real time statistics</b></i>
Connection to communications infrastructure (e.g., call statistics)  see Managers Portal
<i><b>Scratch pad</b></i>
Easy-access note pad integrated with interaction record
Guess it will help you.
Regards,
Animesh -
I'm in the process of migrating an HFM application from v4.1 to System 9.3.1.
Question: Has the HFM web client been totally replaced with Workspace? I'm able to access HFM through the Classic win32 desktop client and Workspace, but I can't seem to find the HFM web client similar to the one used in v4.2. (i.e. http://localhost:80/hfm) because this doesn't work.
ThanksTop Tip of the day...
if you use the URL: http://<yourserver>:19000/workspace/index.jsp the splash page will not be launched...
So - the trick is the /index.jsp on your url
:) obvoously replace <yourserver> with your hfm server info or dns name
Good luck
Noel
Maybe you are looking for
-
I'm searching solutions to merge multiple documents (all stored in one folder) via command line or batch file to a single PDF-File... Is there a way to do this? Finaly I want to control this from a application written in MS-Access. So, perhaps there
-
Hi! Can anyone help? This is driving me insane. I have a MacBook, which still works pretty well apart from the fact that over the last few weeks the trackpad started not responding very well. I have to hit very hard and it only works on the bottom ri
-
Opposite of Previous function in webi 4.0
Hi All, I have to compare current cell value to next cell value in webi report to fulfill one the requirements. Any Suggestions. Thanks Arvind Shukla
-
Refreshing Discoverer Portlets
Using 9iAS R2, we have set up discoverer portlets on our intranet and have serveral scheduled worksheets which display within portlets. On one report I have scheduled it to run once an hour and I have also set the Discoverer worksheet porlet to refre
-
Max-stack-size - default_stksize
Hi, First, sorry for my english ^^ I'm new on Solaris. I installed Solaris 10 on Sun V490 . I use Core Network. Why with the default setting, daemons or process of the OS "don't work" like this: Jun 17 14:50:10 unknown genunix: [ID 883052 kern.notice