Groupwise database post office errors

Thanks in advance for any answers you can give me.
We had some corruption in our groupwise databases today, We have two users who's gwcheck comes back as
Problem 39- Unknown file useremc.dba - 64652288 bytes,
They cannot login to their mailbox and when you email them you the message
Tried to change a locked setting
Error = D013
What would be the best recourse in fixing this?
We also have a few people whos password is now gone. everything is there but you cant login, if you try to change it in console one it changes, but it does not update the password in groupwise,
any help would be appreciated.
groupwise 8.02 hotfix 1

Originally Posted by bmcgehee
Thanks in advance for any answers you can give me.
We had some corruption in our groupwise databases today, We have two users who's gwcheck comes back as
Problem 39- Unknown file useremc.dba - 64652288 bytes,
They cannot login to their mailbox and when you email them you the message
Tried to change a locked setting
Error = D013
What would be the best recourse in fixing this?
We also have a few people whos password is now gone. everything is there but you cant login, if you try to change it in console one it changes, but it does not update the password in groupwise,
any help would be appreciated.
groupwise 8.02 hotfix 1
What kind of corruption did you have? And what happened that led to this?
It would be good to know what OS, version and SP level you are running on and what filesystem the GroupWise dibs are on?
As for the unknown file error... could be normal as the file mentioned is a backup file or the database, typically created by GroupWise during certain gwcheck maintenance tasks.
Is there a .db file for the user in question (e.g. useremc.db in the offusr folder?).
In all cases tread carefully as you first need to determine what might be broken before trying to fix anything.
-Willem

Similar Messages

GroupWise 2012 Post Office crashes.

2 of 5 post offices crash randomly. 1 PO is on an entirely different server and network. The POs started crashing after we upgraded to GroupWise 2012. Both POs run on SLES v. 10 fully patched. 1 of the POs runs in a clustered environment and other POs on the same server stay running when the problem PO crashes. The other problem PO is on a dedicated server along with the MTA and domain. I have run GW maintenance through ConsoleOne on both POs. I have renamed the wpcsin & wpcsout from postoffice directory and the ngwcheck.db files and ran maintenance from ConsoleOne. The issue still remains. Below is from the messages log and is the common error that is received when the POs go down. Any help would be appreciated.
May 22 10:14:24 lxnode02 kernel: gwpoa[28661]: segfault at 00000000e6eea691 rip 00000000f777a59e rsp 00000000ef73a210 error 6

Originally Posted by ellisck
2 of 5 post offices crash randomly. 1 PO is on an entirely different server and network. The POs started crashing after we upgraded to GroupWise 2012. Both POs run on SLES v. 10 fully patched. 1 of the POs runs in a clustered environment and other POs on the same server stay running when the problem PO crashes. The other problem PO is on a dedicated server along with the MTA and domain. I have run GW maintenance through ConsoleOne on both POs. I have renamed the wpcsin & wpcsout from postoffice directory and the ngwcheck.db files and ran maintenance from ConsoleOne. The issue still remains. Below is from the messages log and is the common error that is received when the POs go down. Any help would be appreciated.
May 22 10:14:24 lxnode02 kernel: gwpoa[28661]: segfault at 00000000e6eea691 rip 00000000f777a59e rsp 00000000ef73a210 error 6
There are several known issues with crashing POA's. Make sure you'll be able to send a core dump and supportconfig to Novell, open an SR and they can provide you with an updated build in which the crashing should occur much less frequently.

Groupwise 8.02 hp1 post office not startin

We have a problem after rebooting groupwise the post office agent is not starting. Is there something I can look at to trouble shoot why.
we are running on suse 10 sp2 oes 2 sp1
thanks!

On 9/12/2011 8:56 AM, bmcgehee wrote:
>
> We have a problem after rebooting groupwise the post office agent is not
> starting. Is there something I can look at to trouble shoot why.
> we are running on suse 10 sp2 oes 2 sp1
>
> thanks!
>
>
try running it manually
it's something like
cd /opt/novell/groupwise/agents/bin
su to root
../gwpoa @../share/yourstartupfile.poa
(You can also add -show to see a gui)

The version of GroupWise you are using cannot access this post office

I built a new Server and added it to my PCSD Tree. The new server name is
GroupWise and has an IP Address of 10.10.0.13.
I followed the GroupWise 7 Installation Guide and installed GroupWise to
this server. At no point did I find any place to enter the GroupWise
License.
During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
However the larger problem is this: I can not login to the GroupWise
Server. Below are two screen shots of what I’m getting when I
launch the GroupWise 7 Client. When I look at the .NLM loaded on the
Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
message in the message window “The version of GroupWise you are
using cannot access this post office”. Then after clicking OK three
times, the following message appears on the screen “GroupWise did
not initialize successfully, Please run GroupWise Setup, or contact your
system administrator. Unspecified error OLE Error 80004005

*During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
**You need to disassociate these four NDS users from any GW attributes.
Right-click each user in C1, GroupWise Utilities->GW / eDirectory
Association->Disassociate GroupWise Attributes.
*** When I do as instructed I get the following error:
[username] is missing the following attribute: NGW: Post Office
~~~~~~~~~~~~~~~~~~~~~~~~
*GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
**If the post office is closed, you need to determine why this is. On the
MTA, hit F10, Configuration Status, highlight your PO and hit enter,
select details, then look at the last closure reason.
*** Last Closure Reason= Missing or incomplete address information
[ When I installed GroupWise, I wanted all the e-mail to be stored on the
EMAIL Volume. During the install, I Changed the Install Directory to
\Groupwiseemail. After the install I have two directories in this volume.
One called DOMAIN and the other called PCAM (PCAM is name of my domain).
~~~~~~~~~~~~~~~~~~~~~~~~
*On the Client, when I launch GroupWise, The Novell GroupWise Startup has
a message in the message window 'The version of GroupWise you are
using cannot access this post office'.
**What version of GroupWise is on the server and what version client are
you
using? Also, if you pull up the properties of both the domain and post
office in C1 what is the database version listed as?
*** I installed GroupWise 7 both Server and Client. I'm thinking this is
due to the Post Office being closed. I only have 1 Post Office.
Thank You;
Lewis

Unable to validate post office database

I have a problem with one of my five post offices. I went to run a Validate Database task, and it errors out after a second and displays the following in a red text:
javax.ws.rs.WebApplicationException: javax.xml.bind.MarshalException - with linked exception: [java.net.ConnectException: Connection refused] (null)
Just tried this on one of my other post offices, and it is running just fine.
I was trying to figure out why we are having some issue with this post office/server.
Server is OES 11 SP2 / SLES 11 SP3
post office is on an NSS volume
system was upgraded from 2012 to 2014 over a month ago.

That's normal, You can't get to the admin console on a server with just a post office. Looks like you are configured correctly. So for some reason, the domain's admin service is not communicating with the po admin service when you try to validate the po db. Look at this po's POA object in admin and see if the admin port is set. If it isn't then for some reason it did not get replicated to the domain.db.
--Morris
>>> ShootDawg<[email protected]> 7/3/2014 6:26 AM >>>
0.0.0.0:9711=>PO1.Barth(/media/nss/HERMESPO1/bcscpo1)
0.0.0.0:9710=>UNCONFIGURED
When I goto the server's groupwise administrative webpage, it wants me
to run the gwadmin-ipc authorize command on the server, which I
do....and then the browser moves to the next page, I select upgrade
existing domain/po, highlight my post office (database version shows
1400) , enter the MTA ip address and admin password, get a crongrats,
restart the PO (or PO and gwadminservice)...
then try the admin page again....wanting me to authorize it to do
the install again.... and again...
mblackham;2324755 Wrote:
> Verify that the admin service on the problem po server is configured to
> run against the post office:
>
> /opt/novell/groupwise/admin/gwadmin-ipc query
>
>
> you should see something like:
>
> 10.10.10.10:9711=>Provo.Utah(/mail/provo)
>
>
> If you see 0.0.0.0:9710=>UNCONFIGURED , it means the admin-service is
> not configured to listen for any GW components. If this is the case,
> run thru the web console upgrade process to upgrade the PO on that
> server, even if you have already done it before.
>
ShootDawg
ShootDawg's Profile: https://forums.novell.com/member.php?userid=4554
View this thread: https://forums.novell.com/showthread.php?t=477985

Error 8f03 starting post office

I created a new post office on a SLES10sp3/OES2sp3 server already running the primary domain, gwia, another po and webaccess. But I'm having a problem getting it to start using the poa startup file. Here's the text from the console:
srv1:/opt/novell/groupwise/agents/bin # ./gwpoa --show --home @hsstudpo.poa &
[1] 12179
Warning: Running as root
srv1:/opt/novell/groupwise/agents/bin # An invalid configuration option was detected (8F03).
Command Line Option: media/nss/VOL1/grpwise/hsstudpo
A required file or directory is missing (DF10).
home/wphost.db.
[1]+ Done ./gwpoa --show --home @hsstudpo.poa
The home switch in the hsstudpo.poa file looks like this:
--home /media/nss/VOL1/grpwise/hsstudpo
The POA will start just fine if I use the command:
srv1:/opt/novell/groupwise/agents/bin # ./gwpoa --show --home /media/nss/VOL1/grpwise/hsstudpo &
I've tried shortening the path to the post office thinking maybe it was some weirdness with the 8 character issue, but that didn't make a difference.
I'm stumped.
The only thing I can think of that may be causing this is when I first created the PO object in C1, I forgot to change the POA type from Netware to Linux. I have since fixed that however. Would a domain rebuild be required?
Thanks for any assistance.
Dan

dlietz,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Post Office exiting on glibc error

My Post Office keeps unloading unexpectedly. We are running GW 2012 SP1 on Suse 10 SP3 and OES 2.0.3. Nothing gets written to the logs, but it crashed when I had an active SSH session open and it wrote the following to the console.
*** glibc detected *** /opt/novell/groupwise/agents/bin/gwpoa: free(): invalid next size (normal): 0xe86ca830 ***
======= Backtrace: =========
../lib/libc.so.6[0xf60caa51]
../lib/libc.so.6(__libc_free+0x84)[0xf60cc124]
/usr/lib/libstdc++.so.6(_ZdlPv+0x21)[0xf628b2b1]
/usr/lib/libstdc++.so.6(_ZdaPv+0x1d)[0xf628b30d]
/opt/novell/groupwise/agents/lib/libinetpack.so(_ZN11NgwRmWriterD1Ev+0x37)[0xf66e59ed]
/opt/novell/groupwise/agents/lib/libinetpack.so(_Z14GetSMTPMessageP19ngwgwia_contex t_recP16POP3_INFO_RECORDjj+0x648)[0xf6602b5c]
/opt/novell/groupwise/agents/lib/libinetpack.so(_Z22NgwGwiaCheckConversionP19ngwgwi a_context_recjjjjPP7MM_VOID+0x81c)[0xf6621e06]
/opt/novell/groupwise/agents/lib/libinetpack.so(_Z11ImapDoFetchP16imap_context_recP 15WRITE_BUFF_INFOPhPS3_jS3_P13svTCP_CONNBLKP17itcp _gets_context+0xc94)[0xf65edc4a]
/opt/novell/groupwise/agents/lib/libinetpack.so(_Z18Imap4HandlerThreadP19ngwgwia_co ntext_recP13svTCP_CONNBLK+0x2d27)[0xf65fbd8f]
/opt/novell/groupwise/agents/lib/libinetpack.so(NgwGwiaIMAPWork+0xd9)[0xf65fd289]
/opt/novell/groupwise/agents/lib/libpoa.so(XmapHandler+0x5b3)[0xf75dd4a2]
/opt/novell/groupwise/agents/lib/libpoa.so(TcpAXmapThrdHandler+0xb68)[0xf76bea65]
/opt/novell/groupwise/agents/lib/libsvrtk.so(_NgwThrdCreate+0x40)[0xf69c5036]
../lib/libpthread.so.0[0xf605535b]
../lib/libc.so.6(__clone+0x5e)[0xf6126d1e]
======= Memory map: ========
08048000-0809d000 r-xp 00000000 68:03 114288 /opt/novell/groupwise/agents/bin/gwpoa
0809d000-080a8000 rwxp 00054000 68:03 114288 /opt/novell/groupwise/agents/bin/gwpoa
080a8000-0a74d000 rwxp 080a8000 00:00 0 [heap]
e1300000-e133a000 rwxp e1300000 00:00 0
e133a000-e1400000 ---p e133a000 00:00 0
e1500000-e1700000 rwxp e1500000 00:00 0
e1700000-e1900000 rwxp e1700000 00:00 0
e1900000-e1a00000 rwxp e1900000 00:00 0
e1b00000-e1bff000 rwxp e1b00000 00:00 0
e1bff000-e1c00000 ---p e1bff000 00:00 0
e1d00000-e1f00000 rwxp e1d00000 00:00 0
e1f00000-e2100000 rwxp e1f00000 00:00 0
e2100000-e2300000 rwxp e2100000 00:00 0
e2300000-e2400000 rwxp e2300000 00:00 0
e2500000-e2600000 rwxp e2500000 00:00 0
e2700000-e2900000 rwxp e2700000 00:00 0
e2900000-e2a00000 rwxp e2900000 00:00 0
e2b00000-e2d00000 rwxp e2b00000 00:00 0
e2e00000-e2f00000 rwxp e2e00000 00:00 0
e2f00000-e3100000 rwxp e2f00000 00:00 0
e3100000-e3200000 rwxp e3100000 00:00 0
e3200000-e32fe000 rwxp e3200000 00:00 0
e32fe000-e3300000 ---p e32fe000 00:00 0
e3300000-e3400000 rwxp e3300000 00:00 0
e3500000-e3700000 rwxp e3500000 00:00 0
e3700000-e38fe000 rwxp e3700000 00:00 0
e38fe000-e3900000 ---p e38fe000 00:00 0
e3900000-e3aff000 rwxp e3900000 00:00 0
e3aff000-e3b00000 ---p e3aff000 00:00 0
e3b00000-e3c00000 rwxp e3b00000 00:00 0
e3d00000-e3f00000 rwxp e3d00000 00:00 0
e3f00000-e3fff000 rwxp e3f00000 00:00 0
e3fff000-e4000000 ---p e3fff000 00:00 0
e4000000-e4100000 rwxp e4000000 00:00 0
e4100000-e4300000 rwxp e4100000 00:00 0
e4300000-e43ff000 rwxp e4300000 00:00 0
e43ff000-e4400000 ---p e43ff000 00:00 0
e4400000-e44ff000 rwxp e4400000 00:00 0
e44ff000-e4500000 ---p e44ff000 00:00 0
e4500000-e45fe000 rwxp e4500000 00:00 0
e45fe000-e4600000 ---p e45fe000 00:00 0
e4600000-e48f9000 rwxp e4600000 00:00 0
e48f9000-e4900000 ---p e48f9000 00:00 0
e4900000-e4cfc000 rwxp e4900000 00:00 0
e4cfc000-e4d00000 ---p e4cfc000 00:00 0
e4d00000-e4f00000 rwxp e4d00000 00:00 0
e4f00000-e5100000 rwxp e4f00000 00:00 0
e5100000-e5300000 rwxp e5100000 00:00 0
e5300000-e53fd000 rwxp e5300000 00:00 0
e53fd000-e5400000 ---p e53fd000 00:00 0
e5400000-e54ff000 rwxp e5400000 00:00 0
e54ff000-e5500000 ---p e54ff000 00:00 0
e5500000-e55fe000 rwxp e5500000 00:00 0
e55fe000-e5600000 ---p e55fe000 00:00 0
e5600000-e56fe000 rwxp e5600000 00:00 0
e56fe000-e5700000 ---p e56fe000 00:00 0
e5700000-e57fd000 rwxp e5700000 00:00 0
e57fd000-e5800000 ---p e57fd000 00:00 0
e5800000-e5900000 rwxp e5800000 00:00 0
e5900000-e59fd000 rwxp e5900000 00:00 0
e59fd000-e5a00000 ---p e59fd000 00:00 0
e5a00000-e5b00000 rwxp e5a00000 00:00 0
e5b00000-e5c00000 rwxp e5b
Anyone have any ideas what is happening here.
Thanks,
Dan

Hi,
Looks like its blowing up processing a POP / IMAP request. Usually the GWIA will bite it, unusual to see the POA die.
Obvious advice: apply latest Gropwise 2012 code ( SP2 )
Questions: Are you doing IMAP and POP via the GWIA or via the POA directly? How frequently are you seeing this?
-- Bob

Clean up after post office deletion

I deleted a post office from a GW 8.02 server running mta, gwia, and one other post office. When it asked me if I wanted to delete file system for that po, I said yes. However when it attempted to delete the files it gave an error saying they would have to be cleaned up manually. The objects deleted fine and the system is otherwise ok but when I run rcgrpwise status I still see the old post office listed there as unused. My assumption is that I need to clean up gwha.conf by removing the old post office from the list and then remove the file system for the old post office. Is that all there is to it?
Thanks for any assistance.
Dan

Hey Dan,
Originally Posted by dlietz
The hypervisor is esxi 5.1. I just built the groupwise server vm, so right now it just has SLES 11.3 on it - I was planning to go away from OES since Groupwise no longer uses eDir objects. My plan was to go with ext3 for the file system.
Sure, that's a valid reasoning and ext3 should work fine. One could probably debate using XFS over ext3 when looking at native Linux filesystems for GroupWise.
One thing I normally do set when using ext3, besides the notaime parameter, is the time dependent check. I usually set that to 12 months. It's very annoying (and time consuming) to have the disk check kick in during a planned reboot.
Originally Posted by dlietz
... What I've read so far seems to indicate I can copy the entire Groupwise system to the new VM and point the upgrade process to the domain and post office and it will upgrade it. Is that correct?
Yes, correct. It is important to make sure the basic agent configuration is in working order (meaning the http pages for the agents have been enabled and LDAP server configuration and eDirectory sync is all set correctly and in working order before doing the upgrade). Even when moving from eDir, it's nice to have the upgrade routine be able to reconfigure those LDAP and sync bits correctly for 2014 before moving to a new directory.
Originally Posted by dlietz
So I'm thinking:
1. Patch current Groupwise to 8.03
You could do, but I don't see the need. You'll be moving to the 2014 anyway... 8.03 does nothing extra for that upgrade process.
Originally Posted by dlietz
2. Upgrade Datasychronizer server from sles11sp2 to sles11sp3
3. Upgrade Datasychronizer software to Groupwise Mobility Server 2.0 (At this point I would have to reconnect to old post office?)
Sure, though I'd not 2.01 can be applied directly as upgrade on your current 1.x Mobility system. Do make sure you set a snapshot on the VM before the upgrade (with the VM tunred off) and leave it long enough, a week or so, until you have checked and double checked all is working on the 2.01 system. That way it's easy enough to roll back to 1.x if needed.
Originally Posted by dlietz
4. Copy Groupwise system to new server using db copy in multiple passes with a final pass when groupwise is offline and run upgrade process.
Yep, and if the current filesystem is NSS... make sure to run it with the migrate (-m) option so the lowercase conversion runs with it.
Originally Posted by dlietz
I was also considering separating Webaccess and Calendar Publishing to separate server since Webaccess is no longer part of the Groupwise server install.
Absolutely, and I'd also place that Webaccess/Calendar Publishing server in a DMZ if you have it. All that's needed with the 2012/2014 version is access to the SOAP port on the POA(s).
Cheers,
Willem

The Post Office Agent might not be configured for SOAP.

I have a virtual server with VMware ESXi 5 running SLES11 sp1, OES11 and GroupWise 12.
The GroupWise system have one domain and one post office with several users.
The users can access the mailbox with the GroupWise Windows Client, but when they try to login in the GroupWise Webaccess, they get the following error: "[9505] Your post office is unavailable. The Post Office Agent might not be configured for SOAP. Please contact your system administrator".
1.- The post office agent have the SOAP option turned on.
2.- I check the java environment variables and they are pointing to the right directory.
3.- The Linux Firewall is turned off.
4.- rcapache2 start and rctomcat6 start dont show errors.
5.- I check the webacc.cfg file and all IPs address and ports (POA & DVA) are fine.
Any help, comment or suggestion will be welcome.
Thanks in advance.

Check to see if the port is being used by SLES...
--El
Originally Posted by crivera
I have a virtual server with VMware ESXi 5 running SLES11 sp1, OES11 and GroupWise 12.
The GroupWise system have one domain and one post office with several users.
The users can access the mailbox with the GroupWise Windows Client, but when they try to login in the GroupWise Webaccess, they get the following error: "[9505] Your post office is unavailable. The Post Office Agent might not be configured for SOAP. Please contact your system administrator".
1.- The post office agent have the SOAP option turned on.
2.- I check the java environment variables and they are pointing to the right directory.
3.- The Linux Firewall is turned off.
4.- rcapache2 start and rctomcat6 start dont show errors.
5.- I check the webacc.cfg file and all IPs address and ports (POA & DVA) are fine.
Any help, comment or suggestion will be welcome.
Thanks in advance.

[9505] Your Post Office is Unavailable.

Recently migrated Groupwise 2012 services from a single box to a split system with PO, Domain, and Monitor on one box and the GWIA, Webaccess & secondary domain on the second box. All seems well, except *some* users (not all, only a handful) are receiving the following message when logging into webaccess:
[9505] Your Post Office is Unavailable. The Post Office Agent might not be configured for SOAP. Please contact your system administrator.
Checking the webaccess logs reveals the following error:
8:11:43, <SOAP>, -, INFO, [username], Login
8:11:43, <SOAP>, -, INFO, [username], Unable to connect to the POA @ http://10.1.10.35:7191/soap
10.1.10.35 is the IP of the previous POA - the new POA is 10.1.10.135
SOAP appears to be configured properly and other users are not having any problems. Why just these users?
Thanks!

IP is correct in the webacc.cfg file - though not sure why the last line is commented out. Again, only some users are affected.
Provider.SOAP.1.ip=10.1.10.135
Provider.SOAP.1.port=7191
#Provider.SOAP.1.url=/soap
Checked the TID 7012354. There was no garbage character that I could see, but the Display Name in the General Options was entirely blank. I put the user's Display Name in the field and restarted Webaccess and that user can login now. Wow. Weird.
I then tried another user that was getting the same error - turns out that user's Display Name is blank as well (I didn't make any changes), but it didn't matter - they could log in to webaccess fine - so now wondering if restarting webaccess was all that was needed in the first place? It's not making much sense. Why is this only happening to a few users? Why do some users have a blank display name under those general options? I only enabled the POP3 & IMAP online settings for those specific users and then checked via their client for the Account settings. Looks to be a tough setting to verify for 2000+ users if it can only be accessed via the user's client login.
I went back and unchecked the POP3 & IMAP Online setting for those users and restarted webaccess... everything still appears ok. so just weird.
Will have to monitor for additional user complaints - otherwise, looks now.
Thanks!

Creating new post office / Agent on new server

I am currently running all of my GroupWise 2014 system on the a SLES 11 SP3 server with EXT3 drives. I am needing to move my domain and post office onto an NSS drive for my backup software to be able to restore back on a per user/message basis. So I have created a new OES 11 SP2 server and have created an NSS drive to hold my new domain and Post office.
Since I am not well versed at OES / GroupWise I thought it would be easier to create a secondary domain and Post office on my new NSS drive and move everyone onto the new post office and remove the old post office after everything has been moved.
However, I have created the secondary domain and it is linked and open but I can not startup a new post office linked to the secondary domain. I get the following error:
*com.novell.gw.directory.exception.GwCommunication Exception: An error occurred modifying an attribute value. Path not found (0x8209); remaining name 'nssdom.post-nss'
What could be causing this?
Sincerely,
Ken

Thanks for continuing to help me on this issue. This is the out of the ll command.
/media/nss/NSS_GWISE/groupwise/postoff:
total 0
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 offiles
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 ofmsg
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 ofuser
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 ofwork
-rw-rw-rw- 1 root root 0 Nov 20 09:03 Postofficepath
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 wpcsin
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 wpcsout
/media/nss/NSS_GWISE/groupwise/postoff/offiles:
total 0
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd0
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd1
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd2
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd3
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd4
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd5
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd6
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd7
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd8
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fd9
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fda
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fdb
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fdc
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fdd
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fde
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 fdf
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd0:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd1:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd2:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd3:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd4:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd5:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd6:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd7:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd8:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fd9:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fda:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fdb:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fdc:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fdd:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fde:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/offiles/fdf:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/ofmsg:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/ofuser:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/ofwork:
total 0
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 ofdirect
/media/nss/NSS_GWISE/groupwise/postoff/ofwork/ofdirect:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsin:
total 0
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 0
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 1
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 2
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 3
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 4
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 5
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 6
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 7
/media/nss/NSS_GWISE/groupwise/postoff/wpcsin/0:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsin/1:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsin/2:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsin/3:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsin/4:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsin/5:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsin/6:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsin/7:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout:
total 0
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 ofs
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout/ofs:
total 0
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 0
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 1
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 2
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 3
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 4
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 5
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 6
drwxrwxrwx 1 root root 4.0K Nov 20 08:41 7
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout/ofs/0:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout/ofs/1:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout/ofs/2:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout/ofs/3:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout/ofs/4:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout/ofs/5:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout/ofs/6:
total 0
/media/nss/NSS_GWISE/groupwise/postoff/wpcsout/ofs/7:
total 0

Moved Post Office, Now No new Items

I have moved the post office off of one server and on to another. Everything works grerat, except for GMS. I have made modifications to compensate for the movement of the POA, and it looks like GMS is connecting to the post office, but it is not pulling down any updates. I have tried to setup a trusted applications, but it comes back with this error:
53509: Directory Servies Data Missing...
Any help would be apreciated!

Originally Posted by klondike45
I have moved the post office off of one server and on to another. Everything works grerat, except for GMS. I have made modifications to compensate for the movement of the POA, and it looks like GMS is connecting to the post office, but it is not pulling down any updates. I have tried to setup a trusted applications, but it comes back with this error:
53509: Directory Servies Data Missing...
Any help would be apreciated!
Haven't seen that before... did you change both the authentication source (if needed) as also the Groupwise POA address in your GMS configuration?
Which version & what platform GMS, and which version of Groupwise are you using?

SAPINST failed step "Install Oracle Database (post processing)"

i will install ep6.0 with oracle database 9.2.0.4 on sun solaris.
the SAPINST failed at the step "Install Oracle Database (post processing) with follow error.
the oui - installer (runinstaller) finished sucessfully.
ERROR 2004-08-31 16:05:17
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failedORA-01101: database being created currently mounted by some other instance
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning optionJServer Release 9.2.0.4.0 - Production. SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
no user is logged on the Database. Database is not running (is shutdowned and unmounted). No Oracle process is running.
pleas help.
thanks
armin hadersbeck

Hi Armin,
We're going to install EP 6 stack3 with Oracle 9.2.0.4 and Solaris 9. We have exactly the same error as you during sapinst.
How do you solved that ?
Thanks a lot for your help,
Regards from Mexico,
Diego

How can I get a list of Post Offices?

Hi,
I would like to get a list of Post Offices. According to the documentation this should be done this way:
https://gwserver:9710/gwadmin-service/list/postOffice
But the result is:
<apiStatus xmlns:ns2="http://www.w3.org/2005/Atom">
<error>true</error>
<httpStatus>BAD_REQUEST</httpStatus>
<httpStatusCode>400</httpStatusCode>
<statusCode>56092</statusCode>
<statusMsg>No enum constant com.novell.gw.api.domain.DomainObjectType.POSTOFFI CE</statusMsg>
</apiStatus>
Listing domains, users, poas works as expected.

Not sure if the doc is correct or not, but it is /list/post_office not /list/postoffice
--Morris
>>> gehorvath<[email protected]> 12/18/2014 8:26 AM >>>
Hi,
I would like to get a list of Post Offices. According to the
documentation this should be done this way:
https://gwserver:9710/gwadmin-service/list/postOffice
But the result is:
<apiStatus xmlns:ns2="http://www.w3.org/2005/Atom">
<error>true</error>
<httpStatus>BAD_REQUEST</httpStatus>
<httpStatusCode>400</httpStatusCode>
<statusCode>56092</statusCode>
<statusMsg>No enum constant
com.novell.gw.api.domain.DomainObjectType.POSTOFFI CE</statusMsg>
</apiStatus>
Listing domains, users, poas works as expected.
gehorvath
gehorvath's Profile: https://forums.novell.com/member.php?userid=329
View this thread: https://forums.novell.com/showthread.php?t=481067
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

Failed to load database information. Error in File ReportName {E420E88A-5947-4925-844E-75E6311D3EB3}.rpt: Failed to load database information.

Hi All,
We've been running CR for VS2010 for a number of years in our web app without any issues. Using the same code we recently upgraded our application to support x64 and we have run into this error on our QA servers:
Failed to load database information. Error in File ReportName{Guid}.rpt. Failed to load database information.
Here's are server setup:
Windows Server 2012 Datacenter x64
SAP Crystal Reports Runtime Engine for .Net Framework (64-bit)
IIS 8
Database Server
Oracle 12c
Interestingly, Crystal Reports works fine on our dev machines and it also works on our dev machines if I connect to the QA Database server directly. So I've ruled out any Oracle issues.
I believe the permissions are set up correctly for CR to run, but I'd like to know what permission CR needs to run. I can't find a definite answer reading the forum posts or on the WIKI.
I've used Process Monitor and there seems to be some permission issues with the uf12manager.DLL. See attached document.
I'm really stuck here and any help is appreciated.
Thanks!

Nothing to do with UFL manager, that may be a missing dependency.
Search on a kbase on how to enable crlogger, that may tell you what is failing.
Typical Oracle issues on a 64 bit app is I believe you need to install the Oracle 64 bit Client and then 32 bit client.
Do we support Oracle 12? No we don't...
See this PAM for more info:
SAP Crystal Reports 2011 Product Availability Matrix (PAM)
Open the link for the Database connectivity....
Don

Groupwise database post office errors

Similar Messages

Maybe you are looking for