Groupwise POA missing on Data Synchronizer
Hi all,
On Wednesday we upgraded out Data Synchronizer (With mobility pack) from 1.2.3 to 1.2.4, the intention was to move to 1.2.5 before it was pulled.
We are running Data Synchronizer on SLES11 SP1 at the moment with GW803 on SLES10. Our Groupwise system has 1 Primary Domain and 4 Secondary Domains.
The problem is, since we upgraded the Mobility Pack one of our domains is unable to receive emails on there phones. I look on the Groupwise Monitor in Data Synchronizer and the POA does not even appear in the "POA Status" monitor.
What I have tried to do to resolve so far:
Remove users from problematic domain and readd.
Remove the LDAP group of the problematic domain and readd.
Change Trusted Application Key.
Restarts of Primary, Secondary Domain servers and the mobilty server.
I can not think of anything else, can anybody help?
Thanks
Jon
I am sorry I have posted this in the wrong area
Similar Messages
-
Data Synchronizer GroupWise connector time shift problem
I have recently installed the latest 1.2.2 Data Synchronizer Mobility with GroupWise connector, one bug I have found when looking at time stamps of emails sent and received from the connector perspective I am seeing a 20 hrs time shift i.e. from my Android device I send an email to myself at 06:00 May 6 local the time it will show received at 10:00 May 5 also looking at sent time on the device it will say sent at 10:00 May 5. When I look at the GroupWise client or WebAccess sent and received time and date are correct. Conclusion it's only the Data Synchronizer showing time date incorrectly. Any thoughts welcome.
Update - This problem appears to be phone specific it is a Motorola MB525 with Android 2.2.2 we have some HTCs which do NOT have a problem with time zone. Another minor problem is items deleted on the device do not sync up to GroupWise
-
Any way to stop Data Synchronizer from syncing every folder?
SLES 11 64 bit for VMware.
Groupwise connector 1.0.3.512
Mobility connector 1.0.3.1689
I have "folders" unchecked every place you can uncheck them.
Still the Groupwise connector insists on syncing every single folder in a user's cabinet and contacts (even the ones that are unselected in the Groupwise connector->user edit section).
I do *not* mean that it force syncs these folders to the device, just that it syncs them into the "folder list" section that you can monitor from Mobility Connector->Monitor->Click on user name.
Most of our users have dozens of folders, and all the scrolling makes it kind of a pain to monitor the folder (ONE) and address books (usually 1-2) that they are syncing. Also, it seems like adding a ton of unneeded work to the system, and it eats up a pretty good chunk of CPU.rhconstruction wrote:
> So, do the "Folders" checkboxes currently do anything?
If you are talking about the Folder checkboxes in the GroupWise connector, these
do not current pertain to Mobility. Remember that Mobility is part of a larger
"Data Synchronizer" product, with connectors to other components like SugarCRM,
Teaming, etc. So, some of the GroupWise connector settings show for all types
of connectors, but do not always apply to each connector.
Danita Zanr
Novell Knowledge Partner
Get up and running with Novell Mobility!
http://www.caledonia.net/gw-mobility.html -
Data Filter on CSV file using Data Synchronization
gOT error When i used Data Filter on CSV file in Data Synchronization task, Filter condition : BILLINGSTATE LIKE 'CA'
TE_7002 Transformation stopped due to a fatal error in the mapping. The expression [(BILLINGSTATE LIKE 'CA')] contains the following errors [<<PM Parse Error>> missing operator ... (BILLINGSTATE>>>> <<<<LIKE 'CA')].Hi,
Yes,This can be done through BEx Broadcaster.
Please follow the below stes...
1.Open your query in BEx Analyzer
2.Go to BEx Analysis Toolbar->Tools->BEx Broadcaster...
3.Click "Create New Settings"->Select the "Distribution Type" as "Broadcast Email" and "Output Format" as "CSV"
4.Enter the Recipients Email Address under "Recipients" tab
5.Enter the Subject and Body of the mail under "Texts" tab
6.Save the Setting and Execute it.
Now the Query data will be attached as a CSV file and sent to the recipents through Email.
Hope this helps you.
Rgds,
Murali -
Device: z10
Carrier: Verizon
Sync: Novell Data Synchronizer
1.Open Calendar, select month, select add
2. Type subject (My Aniversary), all day event to on
3. Select the Starts day and leave the ends day as default
4. Select Recurrence and set as yearly
5. Leave recurrence defaults and select <, then select Save
6. Note that appointment (Anniversary) will show on desired date for approx. 20 seconds and then disappear. The appointment will as show scheduled for next year, but for this year, you will miss your anniversary.
7. Monthly and weekly recurrence works fine. Local calander works fine.
8. Support recommends KB33905 with Security Wipe. Results: No Difference
9. Only work around is if you need to add a yearly recurrence, you must start the event with a prior-year date
10. Does anyone else have a solution?
Thankspgainer,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Data Synchronizer stopped working
Hi,
We are currently using the Data Synchronizer for our smat phones, specifically Iphones. We made a change with our MX record and moved it to a new hosting company. Our regular groupwise email works fine internalyl and externally, but our remote email does not work.
I am new to the company and am trying to understand how the data synchronzation works. For an example when you set up a Iphone and enter the information for the sychronzation we enter a fully qaualified domain name and I am not sure if the normal setup requires that name to be a public IP/DNS or private, can anyone confirm how it works and od you need to have a public IP etc.
Thank youHi,
The FQDN that you enter on the device for your Data Sync server needs to be a publicly resolvable IP Address. You could have an appliance/device in front of the server doing NAT'ing from public to private IP thus negating the need to have a public IP on the Data Sync server itself.
First step to troubleshoot is check your public DNS records for your Data Sync server and ensure that those are correct and in fact resolving to the correct public address.
Cheers, -
Missing export data in R/3
Hi,
I haven't setup customs management (i.e. not setup for proforma transfers from ECC) to GTS.
However, I get a message when creating billing document in ECC that missing export data even though billing doc is saved.
Do I need to do any config in ECC foreign trade
ANy idea?
Thanks,As now you using GTS for Foreign Trade acitivity you need not to maintain any detail under Foreign Trade Configuration in Feeder system.
You will be getting this message because of the incompletion log schema activated under "Incompleteness Schemas for Foreign Trade Data" (Control Foreign Trade Data in MM and SD Documents). Deactivate those schema .
Kind Regards,
Sameer -
I am not able to move multiple files to PS...regardless whether I am doing HDR or panorama.....get this "image is missing preview data" with the first file number of the series of files.
#missingpreviewdataYou don't "move" anything from Bridge "into" Photoshop. You use Bridge to call on Photoshop to come and open the file(s), and Bridge simply hands the files over to Photoshop.
The problem lies in how the files are being processed and saved.
No one can help you until you provide complete and sensible details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Urgen: SRM and BW user data Synchronization problem
Dear Buddies:
I'm a BWer in a SRM project. These days I meet a very strange problem in the user data Synchronization configuration between SUS and BW system.
The symptom is:
I config the user data Synchronization parameters in SUS system:
SAP Reference IMG u2192 Supplier Relationship Management u2192 Supplier Self-Services u2192 Master Data u2192 Maintain Systems for Synchronization of User Data
Here I've maintained the BW logical system and filled the 'FM BPID' field with 'RS_BW_BCT_SRM_SUS_USER_BPID', and filled the 'Function Module for creating user' field with 'BAPI_USER_CREATE'.
The function of the config above is that:
When a new user is created in the SAP SUS system, it will automatically be created in SAP BW, too.
At the same time, an internal table (SRM_USER_SUPBPID) is filled automatically. The table contains the assignment between the automatically created SAP BW user and the corresponding Business Partner ID of the supplier company.
Then I test the user creation in SUS on web. I found that when the SUS user created , the same user is created automatically in BW system. That means the 'BAPI_USER_CREATE' is work.
But the content of the user-BPID mapping table 'SRM_USER_SUPBPID' is still empty. That means the FM 'RS_BW_BCT_SRM_SUS_USER_BPID' is not work at all.
Anybody met with similar problem? Or any suggestion do you have pls kindly show your solutions, Thanks!!No solutions? I need your support my friends.
-
Somebody knows how to change the Iphone 3gs to 4s without missing my data?
I need to change my Iphone 3gs to 4s without missing my data,....Please I need help!!!
Just follow the directions here:
http://support.apple.com/kb/ht2109 -
(R11) HOW TO FIX MISSING CM DATA IN AR_PAYMENT_SCHEDULES_ALL TABLE
제품 : FIN_AR
작성날짜 : 2004-11-09
(R11) HOW TO FIX MISSING CM DATA IN AR_PAYMENT_SCHEDULES_ALL TABLE
==================================================================
PURPOSE
Credit Memo data가
AR_PAYMENT_SCHEDULES_ALL TABLE과 AR_RECEIVABLE_APPLICATIONS_ALL 에 생성
이 되어 있지 않는 경우 datafix script 으로 해결할 수 있도록 한다.
Problem Description
주로 타 시스템에서 autoinvoice 를 통해 넘어온 cm data에서 자주 발생하는 문제로 credit transaction 화면을 통해 보았을때 100% 로 applied 된 credit memo 임에도 applied 된 transaction의 balance에 전혀 영향을 주지 않는다.
cm_info_11.sql 을 수행해 보면 ar_payment_schedules_all table과 ar_receivable_applications_all table에 해당 데이타가 존재하지 않음을 알수 있다.
Workaround
Solution Description
1. AR Support Script Page (http://eastapps.us.oracle.com/appsar/SQL/SQL.htm) 에서 trx.sql과 pay.sql을 download 받는다. 이때 홈페이지 상의 90 Days, 150 Days 등은 transaction date scope을 의미한다. 즉 현재일로 부터 90일전까지의 transaction인 경우는 trx.sql을 150 일전까지의 transaction인 경우는 trx150.sql 을 download 받아야 한다.
2. trx.sql 을 수행한다.
3. trx.sql 수행시 생성되는 trx_<trx_id>.log 를 trx.sql 로 rename하여 다시 수행한다.
4. 정상적으로 수행되었는지 확인 후 pay.sql을 수행한다.
5. pay_<ps_id>.log 를 pay.sql로 rename한 후 수행한다.
Reference Documents
BUG 1401610'ORA-29278: SMTP transient error: 421 Service not available' --> "Oracle had a problem communicating with the SMTP server"
Did you check:
How I can resolve the error " 421 Service not available"
Also look at document id 604763.1
Edited by: MccM on Feb 23, 2010 11:38 AM -
Missing/wrong data in XI from RFC in ECC 6
I'm having the following issue where I send data from an RFC in ECC6 to an imported RFC in XI. Below is my structure in SAP ECC 6 and I see this in my testing of the RFC in SE37:
ORG_ID US12345
LOG_ID OR123
PASS_WD ABC123
TAXONOMY ELECTRONIC.ORDER
Below is a snapshot of the XML of the Inbound Message in XI:
- <rfc:_-EFI_TI076_SEND_PCARD_PAYM xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <S_AUTH>
<ORG_ID>US12345</ORG_ID> (Correct)
<LOG_ID>ABC123</LOG_ID> (Incorrect)
<PASS_WD>mc.Application.PaymentN</PASS_WD> (Incorrect)
<TAXONOMY /> (Incorrect)
</S_AUTH>
Keep in mind the following:
1) I've imported the RFC from the sender system into XI multiple times
2) I've executed both ABAP and Full Cache refreshes
Thanks so much in advance for your help on this.
Regards,
JohnCarlos,
Thank you again for the follow up. I have again checked the data in the RFC, and my problem remains that the data shows up in the wrong field. Also - I'm missing some data that should be in certain fields.
Thanks as well for the information on the Queues. The Queues look ok, and nothing is being held up there. The "green" messages are those that are sent into the XI system from ECC. There are subsequent messages after the initial inbound message, which indicate an additional web service error, of which we can resolve quite easily.
Thanks so much!
John -
Data load fron flat file through data synchronization
Hi,
Can anyone please help me out with a problem. I am doing a data load in my planning application through a flat file and using data synhronization for it. How can i specify during my data synchronization mapping to add values from the load file that are at the same intersection instead of overriding it.
For e:g the load files have the following data
Entity Period Year Version Scenario Account Value
HO_ATR Jan FY09 Current CurrentScenario PAT 1000
HO_ATR Jan FY09 Current CurrentScenario PAT 2000
the value at the intersection HO_ATR->Jan->FY09->Current->CurrentScenario->PAT should be 3000.
Is there any possibility? I dont want to give users rights to Admin Console for loading data.Hi Manmit,
First let us know if you are in BW 3.5 or 7.0
In either of the cases, just try including the fields X,Y,Date, Qty etc in the datasource with their respective length specifications.
While loading the data using Infopackage, just make the setting for file format as Fixed length in your infopackage
This will populate the values to the respective fields.
Prathish -
If the connecting fields are missing the data from knvh should be u00BBnullu00AB
Could you help me I would like to have all fields from kna1 (if the connecting fields are missing the data from knvh should be »null«)in following code
select * from kna1 .
select * from knvh where kunnr = kna1-kunnr and vkorg = '0200'.
itab-mandt = kna1-mandt.
itab-stceg = kna1-stceg.
itab-hkunnr = knvh-hkunnr.
itab-datab = knvh-datab.
itab-datbi = knvh-datbi.
append itab. clear itab.
endselect.
endselect.HI,
use the following code
select * from kna1 into table it_kna1.
if sy-subrc = 0.
select * from knvh into table it_knvh
for all entries in IT_kna1
where kunnr = it_kna1-kunnr
and vkorg = '0200'.
if sy-subrc = 0.
loop at it_kna1 into wa_kna1.
itab-mandt = wa_kna1-mandt.
itab-stceg = wa_kna1-stceg.
loop at it_knvh into wa_knvh where kunnr = wa_kna1-kunnr.
itab-hkunnr = wa_knvh-hkunnr.
itab-datab = wa_knvh-datab.
itab-datbi = wa_knvh-datbi.
append itab.
clear itab.
endloop.
endloop.endif.
endif.
I hope this solves your problem
Regards,
Vara -
How to deal with FLV with missing meta data?
I have and will get flvs in the future with missing meta
data.
I think for the most part the meta data that is missig is the
file length.
The exact files that are not working on our server are
working on some other companies FMS.
They must have some workaround actionscript on the server or
configuration that is making it work.
I'd like to know that workaround or that configuration
change. That would be the ideal fix.
I already know how to fix the FLV after I download it but I
wanted to know if there is another way to deal with this problem.
One were I can leave the FLVs alone.
Is there some serverside actionscript that would tell FMS the
length of the movie or change the configuration of fms to deal with
this somehow.
Any ideas?If you are using the same database and referencing two tables then you dont need special configuration for it. You use single jdbc adapter. In ESR you create two statment structure one for each table. This is one option. The second option is use join statment and write query and in this case one statment data structure.
Please go through the help sap link for the jdbc document structure.
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/2e/96fd3f2d14e869e10000000a155106/content.htm
The second option can be done using the below structure.
<StatementName>
<anyName action=u201D SQL_QUERYu201D >
<access>SQL-String with optional placeholder(s)</access>
<key>
<placeholder1>value1</placeholder1>
<placeholder2>value2<placeholder2>
</key>
</anyName >
</StatementName>
Maybe you are looking for
-
hai Can anyone send the 'How to create queries on effeciencitenly on the Multiproviders' document to me please. rizwan
-
How do i get my podcasts to play in order on my iphone4?
I listen to a lot of podcasts on my Iphone4, I am having trouble with them playing in order. any ideas? thanks thom
-
Rebate calculation from Basic Price PR00
Hi, This query is related to rebate conditions. At present the rebate base is calculated from the subtotal, that is Basic price - discount(The subtotal 7 is assigend to the step 300). As per the requirement from the business, the rebate should be cal
-
Address Book Synchronizer not working
Hi Im running CM 4.2 and the address book synch dosent work i exported all my contacts to my WAB and its giving me a password error saying unable to login with the configured password. im using the same UN and PW that i use on the CCM user page. Any
-
How do I know if receipient of gmail has opened the message?
Is there a way to tell if the recipient of a gmail I have sent has opened the email message?