Groupwise Web service Problem

Hello,
i try to use the novell groupwise web service with coldfusion
8. It´s not possible to resgister this service in Coldfusion
Adminstrator. I get allways an error if i register this service.
This also happens by many other services like Innovaphones
VOIP Soap.
If i use theses services in Flex there´s no problem.
I think, coldfusion has problems with some definitions in the
wsdl-file. Is it possible, to get some informations whats wrong,
when i register the service?
Regards
Thomas

Hi Keith,
The issue may be due to Federal Information Processing Standard (FIPS) was enabled on SSRS server. Please refer to the following steps to fix the issue:
Use Notepad to open the web.config file of Report Server and Report Manager. In SSRS 2012, the default location is: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer
(Note: Please backup the file before modify it.)
Add the following <machineKey> section in the <system.web> section:
<machineKey validationKey="AutoGenerate,IsolateApps" decryptionKey="AutoGenerate,IsolateApps" validation="3DES" decryption="3DES"/>
Reference: http://support.microsoft.com/kb/911722/en-us
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Similar Messages

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

How to install and consume GroupWise Web Service (SOAP)

Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
The documentation from novell site didn't help me, i didn't understant much of it.
All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
Can you please show me some code examples in C# with:
1)loging in using a username and a password,
2)retrieving contact list,
3)retrieving appointment list,
4)sending a mail,
5)setting an appointment
I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
Please, I really need this because I am working at a project right now which involves GroupWise integration.
I hope I haven't disturbed anyone with my simple question.
I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
Thank you very much!
Signature:
How old is the Orthodox faith?
How old is the orthodox faith?

Just a comment.
The value for the version element should be "1.02"
not "1.2".
Preston
>>> On Tuesday, March 01, 2011 at 8:06 AM,
TheRomanian<[email protected]> wrote:
> I have great news! After strong documentation yesterday and today, I've
> just made a successfull example that actually connects to our GroupWise
> server.
>
> I made it in PHP.
>
> I need an ASP.NET + C# application, but now is very simple to convert
> it. I post the PHP code here for other people who in future might be
> interested in finding out.
>
> So a simple PHP GroupWise Login code using "groupwise.wsdl" web
> service:
>
>
> require_once('./GWService/GroupwiseService.php');
> require_once('FB.class.php');
>
> $classmap = array(
> 'Authenication' => 'Authenication',
> 'PlainText' => 'PlainText',
> 'loginRequest' => 'loginRequest',
> 'loginResponse' => 'loginResponse',
> 'logoutRequest' => 'logoutRequest',
> 'logoutResponse' => 'logoutResponse',
> 'UserInfo' => 'UserInfo',
> );
>
> $gwservice = new GroupwiseService(
> "./WSDL/groupwise.wsdl",
> array(
> "location" => "http://11.150.40.78:8756/soap",
> *Your GroupWise server IP:
> and PORT*
> "classmap" => $classmap,
> "trace" => true)
> );
>
> // do login
> $pt = new PlainText();
> $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
> $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
>
> $lr = new loginRequest();
> $lr‑>auth = $pt;
> $lr‑>language = "en";
> $lr‑>version = "1.2";
> $lr‑>application = "phpClient";
>
> $lres = $gwservice‑>loginRequest($lr);
> //print_r($lres);
>
>
> I Hope this will help others.
>
> ‑‑
> Signature:
>
> How old is the Orthodox Faith?
> 'How old is the orthodox faith?'
> (http://www.orthodoxphotos.com/history.shtml)

Urgent web service problem. can not find url of WSDL

Hi all,
I met a web service problem recently.
1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application server as a windows service. It suppose to run all the time. I don't know why the server stop after I log off.
2 For that reason, I tried to migrant my web service from the java application server to Tomcat5.5. I deployed my web service to folder webApps. But I don't know the WSDL url of the web service, which is the web reference for my frent-end c#.net application.
Anybody can give me some idea?
Many thanks

Nobody knows?
Please help me

Create new mailbox via Groupwise web service (SOAP)

Good evening!
I'm new to Groupwise integration via SOAP and was looking through the web service API at this page.
Unfortunately, I was not able to find a method that would allow me to create a new mailbox. Do you have any info if this is even doable via the Groupwise web services? If so, what method should I be using?
Kind regards
Hubbovich

That is only possible programmatically through
the Admin API.
Preston
>>> On Sunday, May 29, 2011 at 12:36 PM,
Hubbovich<[email protected]> wrote:
> Good evening!
>
>
> I'm new to Groupwise integration via SOAP and was looking through the
> web service API at 'this page'
>
(http://developer.novell.com/document...ex.html?page=/
> documentation/gwsoap/gwwbserv/data/b8cg4px.html).
>
> Unfortunately, I was not able to find a method that would allow me to
> create a new mailbox. Do you have any info if this is even doable via
> the Groupwise web services? If so, what method should I be using?
>
> Kind regards
>
> Hubbovich

PL/SQL Web Service problem in Oracle10g

Hi everybody
I try to publish PL/SQL Web Service using JDeveloper 9.0.4.0 and Oracle10g.
But when I deploy the Web Service using 'http-web-site', error messages are:
oracle.oc4j.admin.internal.DeployerException: Unknown site: http-web-site
Active sites are:
file:/D:/oracle/DS/j2ee/home/config/default-web-site.xml
     at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:131)
     at com.evermind.server.administration.DefaultApplicationServerAdministrator.bindWebApp(DefaultApplicationServerAdministrator.java:364)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
     at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
Exit status of OC4J admin tool (-bindWebApp): 17
Use the following context root(s) to test your web application(s):
http://huan:????/CSE5200-PLSQLWS-context-root
Note: JDeveloper was unable to determine the HTTP port number of the remote server for the above URL(s).
Elapsed time for deployment: 2 minutes, 19 seconds
When I change it to 'default-web-set', the following information is shown:
---- Deployment started. ---- 2004-8-31 8:50:08
Target platform is Standalone OC4J (WSConnection).
Wrote WAR file to D:\oracle\DS\jdev\mywork\CSE5200\PLSQLWS\WebServices.war
Wrote EAR file to D:\oracle\DS\jdev\mywork\CSE5200\PLSQLWS\CSE5200-PLSQLWS-WS.ear
Invoking OC4J admin tool...
D:\oracle\DS\jdk\jre\bin\javaw.exe -jar D:\oracle\DS\j2ee\home\admin.jar ormi://huan/ admin **** -deploy -file D:\oracle\DS\jdev\mywork\CSE5200\PLSQLWS\CSE5200-PLSQLWS-WS.ear -deploymentName CSE5200-PLSQLWS-WS
Notification ==> Application Deployer for CSE5200-PLSQLWS-WS STARTS [ 2004-08-31T08:50:32.487EST ]
Notification ==> Undeploy previous deployment
Notification ==> Copy the archive to D:\oracle\DS\j2ee\home\applications\CSE5200-PLSQLWS-WS.ear
Notification ==> Unpack CSE5200-PLSQLWS-WS.ear begins...
Notification ==> Unpack CSE5200-PLSQLWS-WS.ear ends...
Notification ==> Initialize CSE5200-PLSQLWS-WS.ear begins...
Notification ==> Initialize CSE5200-PLSQLWS-WS.ear ends...
Notification ==> Initialize WebServices begins...
Notification ==> Initialize WebServices ends...
Notification ==> Application Deployer for CSE5200-PLSQLWS-WS COMPLETES [ 2004-08-31T08:50:45.766EST ]
Exit status of OC4J admin tool (-deploy): 0
D:\oracle\DS\jdk\jre\bin\javaw.exe -jar D:\oracle\DS\j2ee\home\admin.jar ormi://huan/ admin **** -bindWebApp CSE5200-PLSQLWS-WS WebServices default-web-site /CSE5200-PLSQLWS-context-root
Exit status of OC4J admin tool (-bindWebApp): 0
Use the following context root(s) to test your web application(s):
http://huan:8890/CSE5200-PLSQLWS-context-root
Elapsed time for deployment: 53 seconds
---- Deployment finished. ---- 2004-8-31 8:51:01
And the Web Service still can not work. I did this before with JDeveloper 9.0.3 with Oracle9i and succeeded. Could anybody tell me how to resolve this problem. Thanks a lot.

Thanks Frank.
In my function package i create xml use dbms_xmldom. I save created xml into clob and return this clob in function.
Now I want create web service that return my clob(xml).
I try use JDevelper with PL/SQL Web Service Wizard.
But I get wrong result (see in my first post).
My Example xml in clob
<test>"testvalue"</test>
I want get responce
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
X-Powered-By: Servlet/2.5 JSP/2.1
SOAPAction: "http://localhost/MyWebService1.wsdl/udoFDicnomnsXmlWs"
Date: Thu, 28 Oct 2010 08:23:31 GMT
X-ORACLE-DMS-ECID: 0000IjlvoFZB_6yb05nZ6F1CmJAZ000006
Content-Length: 279812
X-HTTPAnalyzer-RuleName: Pass through :
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<env:Header/>
<env:Body>
<m:udoFDicnomnsXmlWsResponse xmlns:m="http://localhost/MyWebService1.wsdl">
<result><test>"testvalue"</test>
</result>
</m:udoFDicnomnsXmlWsResponse>
</env:Body>
</env:Envelope>
But I get
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
X-Powered-By: Servlet/2.5 JSP/2.1
SOAPAction: "http://localhost/MyWebService1.wsdl/udoFDicnomnsXmlWs"
Date: Thu, 28 Oct 2010 08:23:31 GMT
X-ORACLE-DMS-ECID: 0000IjlvoFZB_6yb05nZ6F1CmJAZ000006
Content-Length: 279812
X-HTTPAnalyzer-RuleName: Pass through :
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<env:Header/>
<env:Body>
<m:udoFDicnomnsXmlWsResponse xmlns:m="http://localhost/MyWebService1.wsdl">
<result>& lt;test>&quot;testvalue&quot;& lt;/test>
</result>
</m:udoFDicnomnsXmlWsResponse>
</env:Body>
</env:Envelope>
Can you advice something?
Edited by: user10707438 on 28.10.2010 1:14
Edited by: user10707438 on 28.10.2010 1:27

Dsp web service problem

Hi, sorry to keep abusing this forum but I'm trying to get something going REALLY quickly and have no alternative at the moment... we're working on that.
So I managed to solve or work around my previous problems and am now trying to expose one of our data services via a web service. The logical data servie represents the gjxdm personType and offers a "getPeople" query.
I followed documentation at these places:
http://edocs.bea.com/aldsp/docs21/appdev/wsdlclt.html#wp1056096
http://e-docs.bea.com/wls/docs81/webserv/client.html#1069115
to generate a web service by creating a control, creating a web servcie from the control, and generating the wsdl file from the .jws.
Then I used an ant script to run the sdo task and clientgen to create the necessary jar files for a client to invoke the web service. Using these jar files I wrote a simple client to call "getPeople".
When I call getPeople I run into an exception:
java.rmi.RemoteException: Element of dateTime is not in valid range: Day has invalid length.; nested exception is:
     java.lang.IllegalArgumentException: Element of dateTime is not in valid range: Day has invalid length.
     at com.raytheon.hiec.bsi.JxdmPersonControlTestSoap_Stub.getPeople(JxdmPersonControlTestSoap_Stub.java:33)
     at com.raytheon.hiec.bsi.JxdmPersonControlTestSoap_Stub.getPeople(JxdmPersonControlTestSoap_Stub.java:46)
     at com.raytheon.test.Test.main(Test.java:25)
Caused by: java.lang.IllegalArgumentException: Element of dateTime is not in valid range: Day has invalid length.
     at weblogic.xml.schema.types.util.XSDDateTimeDeserializer.getCalendar(XSDDateTimeDeserializer.java:35)
     at weblogic.xml.schema.types.XSDDate.convertXml(XSDDate.java:164)
     at weblogic.xml.schema.binding.internal.builtin.XSDDateDeserializer.getObjectFromContent(XSDDateDeserializer.java:16)
     at weblogic.xml.schema.binding.internal.builtin.XSDSimpleTypeDeserializer.processContent(XSDSimpleTypeDeserializer.java:173)
     at weblogic.xml.schema.binding.internal.builtin.XSDSimpleTypeDeserializer.processContent(XSDSimpleTypeDeserializer.java:161)
     at weblogic.xml.schema.binding.BeanCodecSimpleContentBase.processElements(BeanCodecSimpleContentBase.java:60)
     at weblogic.xml.schema.binding.BeanCodecBase.deserialize(BeanCodecBase.java:109)
     at weblogic.xml.schema.binding.SequenceCodecBase.deserialize_incomplete(SequenceCodecBase.java:153)
     at weblogic.xml.schema.binding.SequenceCodecBase.deserialize(SequenceCodecBase.java:87)
     at weblogic.xml.schema.binding.BeanCodecBase.processElement(BeanCodecBase.java:184)
     at weblogic.xml.schema.binding.BeanCodecBase.processAllElements(BeanCodecBase.java:166)
     at weblogic.xml.schema.binding.BeanCodecBase.processElements(BeanCodecBase.java:146)
     at weblogic.xml.schema.binding.BeanCodecBase.deserialize(BeanCodecBase.java:109)
     at weblogic.xml.schema.binding.SequenceCodecBase.deserialize(SequenceCodecBase.java:106)
     at weblogic.xml.schema.binding.BeanCodecBase.processElement(BeanCodecBase.java:184)
     at weblogic.xml.schema.binding.BeanCodecBase.processAllElements(BeanCodecBase.java:166)
     at weblogic.xml.schema.binding.BeanCodecBase.processElements(BeanCodecBase.java:146)
     at weblogic.xml.schema.binding.BeanCodecBase.deserialize(BeanCodecBase.java:109)
     at weblogic.xml.schema.binding.RuntimeUtils.invoke_deserializer(RuntimeUtils.java:428)
     at weblogic.xml.schema.binding.RuntimeUtils.invoke_deserializer(RuntimeUtils.java:328)
     at weblogic.webservice.core.DefaultPart.toJava(DefaultPart.java:384)
     at weblogic.webservice.core.DefaultMessage.toJava(DefaultMessage.java:484)
     at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:325)
     at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:144)
     at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:457)
     at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:443)
     at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:303)
     at com.raytheon.hiec.bsi.JxdmPersonControlTestSoap_Stub.getPeople(JxdmPersonControlTestSoap_Stub.java:26)
     ... 2 more
After searching on these forums I found this:
http://forums.bea.com/bea/thread.jspa?forumID=2055&threadID=600009725&messageID=600020945#600020945
which appears to be te same problem as I am having. I also found other threads (although much much older from like 2002) describing the same problem... one person described it as a bug in the jaxrpc implementation.
Workarounds involved making sure you used Calender in the interfaces instead of Date... however, since everything I'm using is generated by workshop I don't really have any control over the types.
Has anyone run into this (I'm sure someone must have). Any help woudl be greatly appreciated.

I just checked with customer support,
they said our maintenance support just expired.
They said I could not open a customer case.
Could anyone out there open a customer case
to handle this long existed problem.
Thanks

Web Service Problem! URLs are basically broken.

We recently updated our SQL Server 2012 SSRS implimentation from 11.0.3339 (SP1 CU2) to 11.0.3381 (SP1 CU6). We are on Server 2008 R2 SP1. I am pretty certain that this is related to the Cumulative update since I have 6 seperate
and entire clusters doing the same exact thing but I can't find a fix on CU7.
Two symptoms started popping up pointing to a problem with the SSRS Web service.
Symptom 1
1. Before the change, our emailed SSRS subscriptions were sent out with a valid link, now they error out.
Reporting Services Error
An error occurred in the HTTP Runtime object for application domain ReportServer_MSSQLSERVER_0-96-130358835578081507. Most likely, the HTTP request contains an unsupported verb or invalid syntax. (rsHttpRuntimeError) Get Online Help
Unable to validate data.
SQL Server Reporting Services
2. Before the change you could drill down our SSRS URL through the web service.
http://servername/reportserver/folder/report and then when you click on a report name, it would display the report, like you'd expect for the web service. Now you get this error:
Reporting Services Error
An error occurred in the HTTP Runtime object for application domain ReportServer_MSSQLSERVER_0-27-130358853340658138. Most likely, the HTTP request contains an unsupported verb or invalid syntax. (rsHttpRuntimeError) Get Online Help
Unable to validate data.
SQL Server Reporting Services
Can anyone else reproduce it or better yet do you know of a fix?
Thanks,
Keith

Hi Keith,
The issue may be due to Federal Information Processing Standard (FIPS) was enabled on SSRS server. Please refer to the following steps to fix the issue:
Use Notepad to open the web.config file of Report Server and Report Manager. In SSRS 2012, the default location is: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer
(Note: Please backup the file before modify it.)
Add the following <machineKey> section in the <system.web> section:
<machineKey validationKey="AutoGenerate,IsolateApps" decryptionKey="AutoGenerate,IsolateApps" validation="3DES" decryption="3DES"/>
Reference: http://support.microsoft.com/kb/911722/en-us
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Web Service Problem

I have set up a web service reference, but when I test the web service I get a problem. Below is the request and the reponse. The web service is running on a box with IIS. I'm not sure if the problem is with HTMLDB, IIS or the Web Service as I am not very familiar with the technology. Does any have any ideas?
Request:
<?xml version='1.0' encoding='UTF-8'?><SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body><namesp1:getSdeName xmlns:namesp1="http://au.com.fugrospatial"></namesp1:getSdeName></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response:
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns0="http://au.com.fugrospatial" xmlns:ns1="http://java.sun.com/jax-rpc-ri/internal" env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><env:Body><env:Fault><faultcode>env:Client</faultcode><faultstring>JAXRPCTIE01: caught exception while handling request: unexpected encoding style: expected=http://schemas.xmlsoap.org/soap/encoding/, actual=</faultstring></env:Fault></env:Body></env:Envelope>

Yes there is the import of the original wsdl of my web service. I think that it is this url that bpel don't reach. In fact if I try to connect to this URL from my machine=OK (web service deployed on my machine), but I can't connect from linux machine where I've deployed my bpel process...
Thank you, Edwin
Andrea

Web services Problem in SOA suite 10.1.3

HI every body ,
I have particular web service which opens fine with 10.1.3 jdeveloper using the partener but when I try to deploy the application with that particular webservice I get this error
BUILD FAILED
D:\downloads\jdevstudio10131\jdev\mywork\KveniApplications\TelematicsMeter\build.xml:79: A problem occured while connecting to server "localhost" using port "8888": bpel_TelematicsMeter_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "TelematicsMeter" (revision "1.0"): Failed to read wsdl.
Error happened when reading wsdl at "http://drive-app1.drivesoftwaresolutions.com/oracle_telematics_integration/OTIIncomingWS?wsdl", because "Failed to read wsdl file at: "http://drive-app1.drivesoftwaresolutions.com/oracle_telematics_integration/OTIIncomingWS?wsdl", caused by: java.net.ConnectException. : Connection timed out: connect".
Make sure wsdl exists at that URL and is valid.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
it asks me to install a patch and set the classpath to those patches
whats the patch number i need to install so that this particular webservice starts working,
This works fine with 10.1.2 BPEL.
please help me in resolving this error
Thanks
Kveni

Hi.
I suspect you have a proxy server between your localhost and the
drive-app1.drivesoftwaresolutions.com
Probably in Jdev that proxy is setup nicely in Tools->Preferences->Web Browser and Proxy
But maybe your OC4J container running BPEL on localhost does not have that proxy setup.
You need to add startup parameters to the JVM. In 10.1.3 you can do this via the "AS Control" administration pages (there is a link on the SOA suite welcome page). Go to JVM, click on the container and switch to the "Administration" tab.
The properties are proxySet, proxyHost, proxyPort and nonProxyHosts
When deploying from JDev, the compilation in JDev works fine (uses the proxy). But when the JAR is transferred to the server, it is compiled again. This fails because the proxy is not used on the server side and it cannot read the wsdl.

JMS Proxy to Web Service Problem

Hi All,
I have a JMS proxy that routes messages to a web service. I have set the delivery failure parameters on the JMS queue. When a message is put onto the queue and there is a problem within the message flow proper, the message is retried the appropriate number of times and put onto the Error Destination queue as necessary. However, if there is a problem calling the web service, message delivery is NOT retried, the message is NOT put onto the Error Destination queue, and the message is lost. The web service itself isn't throwing a SOAP Fault, but the business service can't reach the web service (firewall issue). My Route Error Handler in the message flow is hit and it performs a Reply With Failure.
Can anyone please explain to me if this is by design and, if so, why? Also, how does a person work around this? I need the message to be retried. I understand that a web service cannot participate in an XA transaction, but it seems to me any failure within the message flow should cause a retry on the JMS queue.
Thanks.
Edited by mvcg at 06/11/2008 1:57 PM

You should remove the Route Node since it should only be used in HttpProxy.
Instead use just the request pipeline for your routing.
if (condition1)
Service Callout (or publish) to Service1
else if (condition2)
Service Callout (or publish) to Service2
else
Rasie error?
You shouldn't need to reply with failure. Any errors in the service callout or publish should go to exception handling if you use QoS exactly-once.

Web service problem (Timeout)

hello
i hope this is the right category to post my problem
i want to use the service "customerCRMChangeRequestConfirmation_In"
but i get this error message: "Error getting response; java.net SocketTimeoutException: Read timed out.
on my search to fix this problem i found the SAP Note 826419.
with following advice:
===========================================================================================
Version NW 7.10
Using NetWeaver Administrator
          o For standard Web service deployable proxy:
            1. Open SAP NetWeaver Administrator in a browser: http:// "Web Services Administration".
            3. Choose "Proxy Definitions by Name" and click "GO".
            4. Select the proxy you want to configure.
            5. Choose the "Configuration" tab.
            6. Choose the "Logical Ports" tab.
            7. Select the logical port you want to configure and choose "Edit".
            8. Choose the "Transport Settings" tab.
            9. Edit the "Max wait-time for HTTP response (in milliseconds)" field.
            10. Click "Save" to save the settings.
============================================================================================
but in my Transport Settings are no "May wait-Time for HTTP response-field"
what is the problem? i have an SAP CRM IDES System with Netweaver 7.1
do I need to install an sp?
I also found this solution for my read time out problem:
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28WSR%29Problems-P01
but this solution with "Visual Administrator" is for java stack, right?
thank you for your help!
kind regards
sven möller

Hi Sven,
There could be several reasons for this timeout but seeing as this is an IDES System things should generally work fine (it's not always the case though).
I would suggest increasing the socket timeout on SoapUI & then test the webservice again. If you are unsure of how to do this just Google 'SoapUI Test Case Socket Timeout' or something similar. You first need to create a test suite/case & then you can control the socket timeout on SoapUI.
Just in case, I would also check that the webservice service is configured correctly by launching transaction code SOAMANAGER from the IDES CRM & searching for this service (look for the change customer service under service providers). Just verify that all endpoint configuration is correct.
I would also verify if you have the necessary authorizations (for your IDES login user) to change a customer.
Lastly, I would setup a trace/recording using the ICF Recorder for your IDES login user (Google 'SAP ICF Recorder' for correct usage). Turn on the recorder to trace your incoming request in IDES & trace the outgoing response from IDES.
You could also try viewing Transaction Codes ST11 & ST22 that trace incoming requests into the IDES Application Server. This may highlight any authorization related issues.
Best Regards, Trevor

OWB 11.2 CDC Web Service problem

We are running OWB 11.2 on a Win x64 2008 database server and using XP clients
Using the new ODI based method for configuring CDC we have created a cdc enabled Oracle module, and this is working as expected. The next step is to try to run "Extend", "Lock subscriber", "Purge" etc from our process flows. To accomplish this we have tried the following:
- right click on the CDC module and create the web service for the module under "default_app_server" (the OWB agent)
- Deploy the web service
- Include the web service in a process flow to extend and lock subscriber
- Deploy the process flow
When trying to execute this process flow it fails with:
javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
I get the same error if I try to execute the web service directly by right clicking it in the OWB client.
There does not seem to be a problem with the web service itself. I have tried to execute it both from the "test page" on the OC4J server, and a simple BPEL process I created in Oracle SOA suite, and in both cases the service works as long as I supply the credentials for basic authentication
I have tried creating a URI location to supply the credentials, and I have also tried to register a the web service as an external service under "Globals Navigator" so I'm running out of things to try...
Any help would be greatly appreciated
Thanks,
Roald

As Guenther mentioned it sounds like you have not defined the work schema. It can be just the same as the schema, but generally advised to have a different one since this will be where temporary work tables will be created.
It should (at least) be in the description that the work schema must be granted the SELECT ANY TABLE privilege for this template/KM.
Cheers
David

J2ME invoking web service problem

Hello. I'm trying to create an application which invokes an ASP 2.0 WebService. For the J2ME, i'm using NetBeans with the SE Developer SDK. The code is not so complicated:
service.ServiceSoap_Stub srv = new service.ServiceSoap_Stub();
srv._setProperty(Stub.ENDPOINT_ADDRESS_PROPERTY, "http://localhost/WebServiceTest/Service.asmx");
srv._setProperty(Stub.SESSION_MAINTAIN_PROPERTY, Boolean.FALSE);
String text = srv.remoteMethod();
The problem is: when i run the application with the Default NetBeans Color Phone, everything is fine; it works. Now, when i try to load it with the SE Developer Emulators, the problem appears.
When using SE K750 Emulator, if i'm not using threads, when i' trying to invoke the web service i get the following error: java.lang.NoClassDefFoundError: service/ServiceSoap_Stub: service/ServiceSoap. If i'm using threads, the emulator crashed when started with a Windows error (zayit.exe has encountered a problem and needs to close. We are sorry for the inconvenience.)
Both applications run ok when i'm using the Default Color Phone from NetBeans and this problem occurs with every phone from the SE SDK.
Is J2ME platform installed on SE phones modified or it's the same runtime environment on all phones? Why does this problem appears? Thanks in advance.

Hello. I'm trying to create an application which invokes an ASP 2.0 WebService. For the J2ME, i'm using NetBeans with the SE Developer SDK. The code is not so complicated:
service.ServiceSoap_Stub srv = new service.ServiceSoap_Stub();
srv._setProperty(Stub.ENDPOINT_ADDRESS_PROPERTY, "http://localhost/WebServiceTest/Service.asmx");
srv._setProperty(Stub.SESSION_MAINTAIN_PROPERTY, Boolean.FALSE);
String text = srv.remoteMethod();
The problem is: when i run the application with the Default NetBeans Color Phone, everything is fine; it works. Now, when i try to load it with the SE Developer Emulators, the problem appears.
When using SE K750 Emulator, if i'm not using threads, when i' trying to invoke the web service i get the following error: java.lang.NoClassDefFoundError: service/ServiceSoap_Stub: service/ServiceSoap. If i'm using threads, the emulator crashed when started with a Windows error (zayit.exe has encountered a problem and needs to close. We are sorry for the inconvenience.)
Both applications run ok when i'm using the Default Color Phone from NetBeans and this problem occurs with every phone from the SE SDK.
Is J2ME platform installed on SE phones modified or it's the same runtime environment on all phones? Why does this problem appears? Thanks in advance.

External web service problem

I am using CAPS 5.1.2 and I want to use an external webservice.
Importing the external web service from URL or file goes fine.
I decided to do this in a JCD and added the webservice as an OTD.
Building and deployment of my project goes fine, but the server.log gives me the following SEVERE log message:
[#|2007-04-12T12:04:39.418+0200|SEVERE|IS5.1.2|com.stc.wsclient.runtime.ejb.impl.WSClientService|_ThreadID=27; ThreadName=Worker: 13;|environment entries for operation classes are not found in ejb-jar.xmlNo object bound to name java:comp/env/WS_OPERATIONS|#]
and also more info messages like:
[#|2007-04-12T12:04:39.418+0200|INFO|IS5.1.2|javax.enterprise.system.container.ejb|_ThreadID=27; ThreadName=Worker: 13;stacktrace-id=21;|EJB5070: Exception creating stateless session bean : [{stacktrace-id=21}]
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.ejb.containers.StatelessSessionContainer.createStatelessEJB(StatelessSessionContainer.java:410)
I can not find any solution to this problem. I also tried to use a Business process instead of a JCD, but I still get the exact same error message.
I have validated the external web service with the "Web Service Definition Editor" and it validates OK.
I am a little bit lost here and do not know where to start debugging this problem. Please help.

Could you please paste your WSDL?

Groupwise Web service Problem

Similar Messages

Maybe you are looking for