Grr. LPX doesn't properly export my QuickTime movies.

Here's the bug report I just submitted:
I never had this problem in LP9 and have no idea why it should be a problem now with 10.0.4. I create a ProRes QuickTime with Final Cut. I check the movie, and it's fine. I open it in LPX, import the audio (I've also tried "extracting" it). I normalize the audio and add a limiter, then export a new movie at the same sample and bit rate (48k/24) . Not only is the audio in the new QuickTime consistently a few frames behind the picture, but the new movie also has some duplicate frames. Good lord - I'm doing professional high-end work and this is supposed to be a Pro app. Accurately copying the picture from a QuickTime file should be a no-brainer for Apple. Please don't turn into Microsoft and start releasing stuff you should know doesn't work properly…or is it too late?
Late addition: I just rechecked my LP9 and there's no QT issue there, so I guess I'll be using that until Apple fixes this. Or does anybody have a solution that doesn't involve a lot of extra steps?

Scott,
As I mentioned earlier.. From what I understand... The issue isn't with Logic.. It's with QT and it's that Dev team that is responsible for any fixes..
Have you posted in their forum?
https://discussions.apple.com/community/mac_os/quicktime
Cheers
Nigel

Similar Messages

Why doesn't Logic Pro properly export my QuickTime Movies?

I started submitting bug reports and posting to the Logic discussion forum about this six months ago. The Art of Sound suggested I post here, so here's my issue:
I never had this problem in Logic 9 and have no idea why it should be a problem now with 10.0.4 through 10.0.7. I create a ProRes QuickTime with Final Cut Pro X. I check the movie, and it's fine. I open it in LPX, import the audio (I've also tried "extracting" it). I do something simple (and not time-altering) like normalize the audio and add a limiter, then Movie/Export Audio to Movie . Not only is the audio in the new QuickTime consistently a frame or two out-of-sync with the picture, but the new movie also has some duplicate frames, making the new QuickTime longer than the original and progressivlely more out-of-sync. The duplicate frames seem to consistently start occuring about 43 seconds into each QuickTime I've tried in LPX. There is still no problem doing this same process in Logic 9, and I never had that issue doing this kind of thing with Soundtrack (sure wish they'd bring that back!). I'm using all the latest software updates on a 2012 3.4 GHz iMac w/ 16GB RAM (the most you could get at the time without a prescription).
Any ideas, anybody?

Jim, I just also tried the Export all tracks as audio files command with Normalize on, and it turns out that the separate audio files are treated as one big file as far as normalization is concerned: if the loudest file peaks at, say, -1.8 dB, all files will get 1.8 dB of gain added. They are not individually normalized, which is what the OP is after. While this "mix normalize" is handy to maintain the amplitudinal balance between the tracks (I first thought this was a bug, I now see this is probably by design), in the specific case of the OP this is not what he needs. Also the manual does not explain that this is what happens. Would have saved the OP some time if it had...
So, rbdavis, you can submit a feature request: a Normalize files individually checkbox in the Export all tracks... dialog.
http://www.apple.com/feedback/logicpro.html

File type for export as quicktime movie

I thought I read here that "Export as Quicktime Movie" produces a .mov file (although without the extension). I'm using Brightcove to host our videos, and their publishpod says it accepts .mov files, but doesn't seem to work with the file from FCE. Is it really a .mov? Or do I need to export using Quicktime Conversion (and burn up lots more time in the process?)

Thanks...
I did search the forum and nothing addressed my specific issue. Sorry if I didn't phrase my question clearly.
Anyway, I suspect the problem is that the Brightcove software does not work well with the Apple Intermediate Codec. I had no problem with a .mov exported with H.264 compression. This adds extra time to my workflow, but I suspect it will be a necessary evil.

Footage is jumpy after exporting to Quicktime movie

I have final cut pro 7 and im working with to different type of footage. One is from my canon t2i and the other is sony 500v AVCHD. Everything was logged and transfered correctly as prores. Everything plays well in the sequence no jumping between between muiltcam shots.The problem comes into play when i right click on the sequence and export to Quicktime movie. I keep all of the default setting of the sequence it was created from. Again everything plays GREAT in the sequence, so i dont think i have any corrupt files.Its weird its like it jumps from 100% on a clip to 98% and then back again. It doesn't play this way thru the entire sequence. I have the new 27 IMac

Did you transcode to ProRes HQ?
If so, your system and or hard drive may not have enough juice to play it back in Quicktime without skipping.
ProRes LT is what your clips should be transcoded to.
If you have Unlimited RT activated for the sequence with dynamic settings, it may appear to play back correctly, but actually the quality and/or frame rate may be lowered slightly for realtime playback.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

Export To Quicktime Movie (Reference or Self Contained) - GENERAL ERROR

Hi -
I recently had to re-install FCS2 due to problems with OSX.
Now, for some reason, when I want to export from FCP to get a QT reference movie, I get a general error message. All other options from FCP export seem to work, but NOT export to Quicktime Movie.
Any suggestions?
Thanks.
Chris

how so?
we can all do with a dummy's cheat sheet e.g. when making a master monitor the record device, not the computer.
So come on, what'd you do?

Export to Quicktime Movie rerendering. Why?

Hi
I have a DV project edited in FCP 5.11 which is all completely rendered. It's actually made up of a number of sequences joined end to end each of which is rendered before rendering the final 'top' sequence. There are some heavily rendered motion still sections in there, so I don't really want to render them again.
However when I Export to Quicktime Movie, using the current settings, ie not making a self-contained movie, it takes hours to render and looks like it is rerendering everything I painstakingly made sure was rendered to full quality already. Is there anything I can do to stop it doing this? (I am doing this to make things much easier for Compressor, rendering the whole project as a referenced movie.)
Thanks for your attention.
Regards
Jeff Cole
PowerMac G5 Dual 2Ghz Mac OS X (10.4.6)

Just checking that you are, in fact, leaving the menu as Current Settings... and not changing it to match the settings of your timeline...
Also, you say you are not making a self contained movie - you've left that unchecked? Are you sure you don't have any gray realtime bars over the top of your clips - resize, dissolve, etc don't require rendering until export. You need to check the Render All menu (opt-r) under Sequence has everything checked...
Patrick

Export to Quicktime/Movie to MPEG-4 Quality Much Worse with Snow Leopard?

I just tried exporting an HD movie from iMovie using Export to Quicktime - Movie to MPEG-4 for the first time since upgrading to Snow Leopard and besides taking forever to export, the quality at the same settings I've used before is terrible. There's terrible macroblocking even on relatively slow moving scenes. I've exported several movies using the same workflow previously to upgrading and the video was perfect.
I use mpeg-4, H.264 encoding, 4096 bit rate, 1920x1080 HD resolution, key frame every 15 frames. It's definitely a change in the encoder as just sharing to the Media Browser results in expected quality.
As a test, I tried upping the bitrate to 5120 but it didn't help with the macroblocking.
Anyone with similar problems and/or a solution?

I've actually started noticing more artifacts using the Share to Media Browser quicktime presets. The movies that are created don't seem to be as high quality as ones I've created before. It's almost like quicktime is missing keyframes or something and then artifacting. It's not consistent. I've got one mobile formatted movie where it artifacts badly in the first minute and then not at all afterwards. It's kind of frustrating.

Export to Quicktime movie continued crashes. HELP

I have sequence, it renders no problem. Whenever I go to export to Quicktime movie it crashes. I have gone and deleted all files associated with it and redone the sequence from scratch, and I keep getting the same results. Crash while exporting. I am working in DV, so all I do at export is export to Quicktime movie, which means it should be exporting as a DV movie. I am not sure what is wrong please help.
As always thanks in advance for reading and replying to my Post,
Sebastian

I did try burning the 18.05GB file on i-DVD but even with the auto compression of i-DVD it only managed to compress it down to 5.4GB - too large for my 4.7GB DVD.
The only reason I need to burn it so my friend can author it is that he's a little too fussy and wants to author it on Adobe Encore.
I managed to get a firewire drive - but the blooming PC didnt accept it as it was Mac formated!
I just exported the original file as a QT movie, reducing sound quality, frame rate etc but it still comes out at 17.5GB - still to large for i-DVD (and thats with i-DVD's compression, which comes in at approx 5GB!)
I really really blame myself for this as I never really looked into anything more than the creative aspect of FCP. But I've started now.

"Export as Quicktime Movie" -- won't play on other computers

When I use the "Export as Quicktime Movie" option and try to play it back on a Mac without FCP installed, it is missing components and won't play back in Quicktime Player. Of course, I can export with various compressions and then it's fine, but sometimes I want that big "original" file. Any thoughts? Thanks!
Message was edited by: elisenew

You do need the codec you are exporting to installed in the other machine if you wish to play the exported file. A variety of codecs are available only with FCP installed.
A couple of possible solutions are a very high res H.264 or Download [ProRes decoder|http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac] to share a prores file between machines.

FCP export to "QuickTime Movie" distorts aspect ratio of all text, displays video correctly.

Hi you all,
My name is Alexander, I'm from Belgium.
I'm working on Final Cut Pro 6.0.6, on a MacBook Pro with a 2.53 GHz Intel Core 2 Duo Processor, running version 10.7.2 of Mac OS X (Lion).
I'm editing a 'making of' of a Flemish feature film. I shot this 35 minute documentary short with my own Canon HDV-camcorder (XH-A1). The Final Cut Pro-project is stored on an external hard drive (1 TB LaCie Minimus).
I've been doing exports to "QuickTime Movie" for years now, without any problems, but since a week or two, FCP started messing up the titles over the video - and the titles only. Their aspect ratio is messed up once exported, but they look just fine in the FCP Timeline (in Viewer, I can verify that the aspect ratio of the titles is always "0"). I'm trying to export this to "HDV - 720p25".
Here's a comparison between the two:
As you can see: the MOV has the titles' aspect ratio all weird, the upper one partly covering the lower one. All titles and text in the docu come out like this, but the video (and audio) is exported correctly.
Any ideas on how to solve this very annoying problem?
Many thanks!!
Alexander

Hi Studio X,
Thank you for your quick reply.
The producers of the film want to upload this making of-documentary on YouTube. Therefore, I need to give them a high-quality-mov with the least possible Megabites. My film has a 35 minute running time.
So I figured: Let's start with the 'smallest' high-quality FCP-export to begin with (HDV-720p25), and throw that one in Compressor, in order to end up with a 'small' but good looking H.264-MOV for YouTube.
But for some reason, those "HDV-720p25"-exports mess up the titles. And I can't figure out why.
Alexander

"General Error" when I export to quicktime movie .mov

I have no idea why all of a sudden FCE4 says "General Error" when I export using quicktime movie... If i use another option like mpeg4 or other it works fine. What could be a problem?
I have lots of memory.

I made the movie self contained and it started but then stops at 10%. This isnt anything complex just a few clips edited together w/ music. I just want to upload to youtube. I have no idea what the deal is!

How to export a Quicktime movie from IDVD ?

How to export a Quicktime movie from IDVD ?

Do you have a DVD that you want to get the video from? Is it a commercial DVD or one that you created yourself?
OT

Final cut pro problem when exporting with quicktime movie

Hello!
I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
keyfram 10
bitrate 6000
faster encode
size 1920x1080 HD 16:9
its not a problem the movie works fine all the way.
But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
If you have an e-mail i can send you just the part where this happening.
Please help me!
Thanks Gabriel

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

Grr. LPX doesn't properly export my QuickTime movies.

Similar Messages

Maybe you are looking for