GRR2 Report Painter - is it possible to see revenue by customer?

Greetings
I have a requirement where I need to compare customer forecast values (manually entered) vs actual customer revenue.
Is something like this possible? I am attempting this thru a CO-CCA report.
At GRR2 I looked at library 1VK (table CCSS). The forecast portion, I was able to enter by creating some secondary cost elements,  but was not able to locate characteristic customer. Is there a way I can add this?
Currently, we are on 4.7 EN and using CO-CCA only, not PCA or CO-PA (which seems like it might be possible). But if anyone has any suggestions I would appreciate it!
Regards
Ken

Eli, Matej thanks for your input. My question is pretty much answered as for as CO-CCA is concerned, in that it cannot be done.
As for this requirement, I have decided to go another route in entering customer forecast data by using CO-PA. Entry of customer forecast data via SD schedule line (with MRP turned off) and having that data transferred to CO-PA.
Thanks again,
Ken

Similar Messages

  • REPORT PAINTER - Add a field to a selection screen - custom report

    Hi,
    I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
    Thanks a lot,
    Julien

    Hi Julien Girard ,
        Could you please check the below link :
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
    Regards,
    S.Manu.

  • GRR1-Report painter balance sheet for non leading ledger

    Hi Experts,
    I want to create a balance sheet for non leading ledger group using GRR1 report painter functionality. i have created also however in general selection i have selected non leading ledger under ledger characteristics. and when i am trying to execute report no data is coming in report. however when i assigned leading ledger report is coming correctly. so my question is how to assign a non leading ledger group in report created using GRR1 ?.
    Thanks in advance for your comments!!

    Dear Mustafa,
    Please go to transaction code se16n, enter table FAGLFLEXT. Give the parameters which you have given in the report painter and try to execute, see whether you get any result. If you find any result, please let us know your general data characteristics and what filter you have put at the column level.
    Best Regards,
    Raj

  • Report Painter - Balance Sheet Accumulated Balance not shown

    Dear Fellow SAP Gurus,
    I'm trying to create a Balance Sheet Report using Report Painter.
    The Library that I'm using is 8A2, GLCPT Table and 8A Ledger.
    I have defined the General Data Selection, Characteristics, Key Figures and assigned the report to a Report Group. Making the Fiscal Year, Period and Company Code a "variable" option. Record Type and Version set at 0.
    The report runs properly from Period 0 to 12 but the problem is it extracted the yearly movements (P&L) and not the accumulated balances. I have tried all sorts of combination for Fiscal Year (tried the year before system implementation) but still couldn't get it.
    I would be very much appreciate it if someone would kindly shed some light on this.
    Many thanks.
    Regards,
    CH

    Dear Mustafa,
    Please go to transaction code se16n, enter table FAGLFLEXT. Give the parameters which you have given in the report painter and try to execute, see whether you get any result. If you find any result, please let us know your general data characteristics and what filter you have put at the column level.
    Best Regards,
    Raj

  • Report Painter Report has the wrong Profit Center

    Hi Gurus,
    I changed the profit center in a cost center using KS02. When I execute a report group for report painter using GR55, I still see costs showing up under the old profit center. What do I need to do the fix the problem. Is it coming from the report group?

    Changes in some fields in cost centres are time dependent. This means that any changes in cost centre will effect only after a certain period of time. for Profit centre it will be updated only after the period. That is if it is period 1 now then it will take effect only in period 2. Check T code OKEG.

  • Report painter - customer balance not accurate

    Hi Expert,
    I am using report painter to create a cusomter balance by months for user. I realised that some customers the balance print from this report not tally to debtor ledger balance but some are tallied perfectly. Anybody know the reason?
    In report painter I on the row field I chose CUSTOMER on column name with SET or Hierarchy note on, variable on, General data selection Ledger = F2, Record Type = 0, Version = 1.
    SAP R/3 4.6C
    thank you

    Hi
    Check the SET' used in that - Check any other selections filtering some of the line items (may be the cost centers, profit centers, etc.,) - Take one customer showing inaccurate figures and check all line items, try to identify the difference where exactly.
    VVR

  • Conditional formating in report painter (GRR2)

    Hi all,
    An end user ask me if it's possible to do a conditional formatting in a cell of report painter (run with GRR3) if the value is true (i.e. as in excel, you can colour a cell if it's less than zero and so on). I know that it's possible with the BEx (for SAP BI), xcelsius, crystal reports and surely with bussiness object. I can see that it's only available do the format for the all column or for a line, but I don't  find the option for a cell with a condition (surely because it isn't available).
    Please, confirm me if it is not available, because I'm a long time looking for a reply but I only find info about BEx, xcelsius and so on (nothing related with report painter, GRR2 and so on). But if it's possible, please let me know how to do it.
    Thanks in advance
    Best regards,
    Eduardo

    Hi,
    I don't think that we can put the conditional formula. but we can do the calcualtion by row wise or column wise.
    Thanks.

  • Report Painter: Display only own Libraries in GRR2

    I'm working with Report Painter and Key Users find it troublesome to explore all the library tree until they get their own library...
    Does anyone knows if it is possible in transactions GRR2 or GRR3 to hide the standard libraries???
    Thanks for you help!

    I have configured that one but it seems that in transaction GRR2 or GRR3 is checking other Authorization Group (G_803J_GJB = Report Writer: Report Group)
    I will configure both or I will raise an OSS Message with the incident.
    Thanks for the prompt response!

  • Is it possible to change the name of a report thanks to the report painter

    Hello,
    Is it possible to change the name of a report thanks to the report painter GRR2?
    Thanks!
    SB

    Hi,
    First of all, it's possible to change a report description(title), if that what's you mean. If you want to change a code(name), then indeed you have to copy your report under a new name. To delete the report, first delete it from the report group (via GR52) and then you will be able to delete it.
    Regards,
    Eli

  • New column with formula in Report Painter - GRR2

    Hi gurus,
    I want to insert a new element in my new report painter created by GRR2. I took a standard report and I copied the report.  I know how to insert a new element.
    The problem is I want to choose the value of a field in PROJ table for create a formula in my report. The users insert a value in user-define fields of CJ20n, and i would like to choose this value for create a formula in my report.
    Can I create a formula to take this value from the table PROJ? If I need to create a characteristic for choose this field, as I can create?
    Thanks.

    Hi,
    My question is:
    Can i pick a value of a table (proj) for use in formula of report painter??
    Many thanks.
    Regards.

  • Report Painter: Possible to show Report with Zero (not No records were sel)

    Report Painter: Possible to show Report with Zero (not No records were selected)
    Dear Guru,
      is there any way to make Report Painter to show Report with Zero / 0 when there were no record were found. (No records were selected).
    Regards,
    Howard

    hummm, I dont think so
    THats not possible, as far as I know
    Regards
    Ajay M

  • Is it possible to optimize a customized report painter?

    Hi Experts,
    Is it possible to optimize a report painter? How?
    It's too risky too edit the codes since all of the programs are SAP Standard programs. I already added indices in to the customized tables. But still it takes me 12 minutes to excute this report painter.
    I tried to debug the codes there are several and nested perform routines inside the loop.Have you tried modifying a report painter program?
    Thanks. Points will be given...

    Hi,
    You can modify Standard report painter programs, but ideally SAP doesnt recommend it.
    SAP has provided Notes for any add-on functionality or to fix bugs.
    Please search for a sap note on www.service.sap.com
    Best regards,
    Prashant

  • Is it possible to optimize a report painter?

    Hi Experts,
    Is it possible to optimize a report painter? How?
    It's too risky too edit the codes since all of the programs are SAP Standard programs. I already added indices in to the customized tables. But still it takes me 12 minutes to excute this report painter.
    I tried to debug the codes there are several and nested perform routines inside the loop.Have you tried modifying a report painter program?
    Thanks. Points will be given...

    hi,
    Check this -
    For Report Painter
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    http://searchsap.techtarget.com/searchSAP/downloads/Teach_yourself_SAP_C20.pdf#search=%22CREATE%20REPORT%20USING%20SQVI%20%2C%20SAP%22
    Re: Interactive ALV
    With Regards
    Madhu

  • Is it possible to transport ABAP querys/ Report painter between systems

    Hi all
    Is it possible to transport ABAP querys/ Report painter object between one r/3 system and another ?

    Hi,
    Its possible to transport SAP Query (Global Area). When you save the infoset it will ask you to the request id for transport
    For SAP Queries in Standard area, there is a transport icon in the SQ02 screen which would transport it to required destinations
    thanks
    Sriram

  • While doing changes in GRR2 no transport request is generated( report paint

    Hi Gurus,
            when i am changing the report painter (GRR2), no transport request is generated.Actually when i am changing the following........
                  Trial balance......... liabilities          from               to
                                                                 100000           199999 (allready existing)
                                                                  600000           690000 (new range while doing this,not generated transport request)
    please do needful,
    Regards,
    Rmesh.

    Hi,
    Changes in report painter do not generate change request. You can either create a transport automatically by going to GCTR transaction or you can simply export/import the changes by going to GR37/GR38 transactions.
    Regards,
    Eli

Maybe you are looking for

  • IAS LDAP Taglib loopValue

    I'm having trouble with the iAS LDAP taglib. I'm having trouble with the looping tags, however. The pages compile, but they throw NullPointerExceptions once they get to the loopValue or loopEntry tag. Here is my code: <% //BEGIN CODE %> <%@ page erro

  • Which Macbook Pros have turbo boost?

    I am about to sell my 13 inch and upgrade to a refurbished 15 inch, but I want a processor with turbo boost. What time period did turbo boost processors start being available on MBP's?

  • Jdev10.1.3 DB WebSvc Callout from WSDL

    -Looking for an example of a DB web service callout developed from a wsdl returning a complex type using JDev10.1.3Prev that can be loaded into a 10g104 database. -We get the code from the wsdl, but are lost as to what files and/or additional jars to

  • Vault update with AP3 corrupts database for Library

    I have upgraded happily to AP3 (great new feature set) and was updating my vault when everything hung...force quit AP3 and reboot. Now when open AP3 I get a message: There was an error opening the database for the library "~/Pictures/Aperture Library

  • Printing window envelope on CM1415fnw ruins envelope

    I'm trying to print a logo on a window envelope and not only it the envelope is out of shape but the plastic window is ruined as well. Is there any solution for this?