GRRR--HELP

I'm having problems AGAIN with my ipod mini. My itunes is not recognizing the ipod...i've tried to uninstall everything and reinstall it, but still having problems...any suggestions?

Hi Alyson
Connect the iPod to your computer, then reset while it is still connected (press select and menu simultaneously until the Apple logo appears).

Similar Messages

Grrr help me with my ZEN mi

ok i bought this off my friend and it had usb and everthing but no CD and i need to put music onto my ZEN micro but i dont know how to update my firmware, i have WMP i have also downloaded the latest firmware but dont know how to put it onto my ZEN micro so can some help me pleeeaaasseeee thank youu

Make sure that battery is charged.
Detach your player from your PC, and ensure that it is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the Recovery Mode appears.
The following options will be displayed: </LI>
Clean Up (Performs a disk scan on the players hard disk, it will not affect music files)
Format All (Formats the players hard disk - Note: all contents will be lost)
Reload Firmware (Reloads the Operating System on the Jukebox. Select this option ONLY if you have access to a PC and you have downloaded the necessary firmware to install.)
Reboot (Reboots the device). </LI>
Run a clean up then reboot

GRRR help me out plz!

Hey,
My Ipod 5th gen 60gb makes a high pitch screaching on certain songs, any body have any ideas??
Sam

try substituting
public class RootApplet extends javax.swing.JApplet {
for
public class RootApplet extends com.sun.java.swing.JApplet {

HT1918 My visa card was stolen and now I cannot download anything new using my account because it is wanting the old access code but I can't remember it. I have been trying to reset my billing card and it keeps saying give the three digit code on the back

My visa card was stolen and now I cannot buy anything using my account. It is asking for the old three digit access code and I cannot remember it. I have tried to reset my new billing information and it keeps going back to please put in the pass code. Grrr help help!!!!

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

All the playlists I lovingly and painstakingly made have disappeared, but my songs are still there. What gives?

All the playlists I lovingly and painstakingly created have disappeared. I have Windows 7 and have decided NEVER EVER to get another 'update' of ITunes...grrr Help!

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Flash Player 10.1 is blocked on my Mozilla Firefox

So this isn't my laptop because personally I would stay with internet explorer....but, yeah. So My cousin uses Mozilla Firefox (Safe Mode) <--Not sure what version. But everytime I go here, or youtube. Or any where with like ANYTHING! It says I need to download the new flash player? http://www.phonezoo.com/CreateEditRingtone2.do?uploadAlways=true
It's really pissing me off. I don't know what to do because after I download it then it says successful blah blah blah. Then my Add-Ons pop up and nothing changes i've done everything rebooted and i'm just stumped. The PLUG-INS says getplusAdobe 16263, then under EXTENSIONS it says ADOBE DLM (powered by getplus(R)) can someone please help me. I've gone forever with no videos and not being able to upload things...GRRR help me please? What am I not doing right?

Hi KB, Thanks for the info on the files. I can see what you are going to need to do, but need to know what your operating system is. What OS of Windows? Also what version of Internet Explorer? IE7, IE8?
Thanks,
eidnolb

Why wont google chrome let me play you tube videos as all I get is a black scfeen with no control iocons??? ps help I've but made n o diff. tried clearing cashe's and browsing data but made no diff grrr

why wont google chrome let me play you tube videos as all I get is a black scfeen with no control iocons??? ps help I've but made n o diff. tried clearing cashe's and browsing data but made no diff grrr

    Check whether you are currently in YouTube HTML 5 trial?
     http://www.youtube.com/html5
    At the bottom left of the page uncheck the box for
   "You are currently in the HTML5 trial".

Can some one tell me how to get this imessage (i think thats what it is they are in blue) off my flippin phone because they are going to other ppl as well as ppl intended and i keep recieving msgs from randoms grrr please help

i recently went from a iphone 3 to a 4 and when i send messages they are going to other ppl as well as the ppl they are intended for this did happen once with the iphone 3 but now its all the time i have been in settings but it's not high lighted so dont know how to get the **** thing off so i can just send normal msgs, please advise

i didnt have any on but i disabled it then enabled lol dunno how but i have done it i think thanks for your help there is tooooo many settings on the phone for me i was ok with the 3GS just flicking through settings again and my face time as dissapeared lol any ideas

"iTunes has stopped working" grrr, any help?

Well this happend last night. i had just gotten a bunch of songs and i was putting them on itunes, everything was fine. i always need to create an ACC version of everything as my music is saved on to an external hard drive (if thats not plugged in iTunes cant find the music, therefor cant play my music.) and then a pop up messege from windows said "iTunes has stopped working" and it didnt give me any other choice but to close the program. i tried a few more times before looseing my paticence and gave up and turned of the laptop. then today i found an album i wanted to put on, i put in the disk worked fine i could listen to the music clicked import CD then came up with the annoying messege again
now i am really annoyed and i just want to get my itunes working, without loosing all my music. any help? thank you

i always need to create an ACC version of everything as my music is saved on to an external hard drive (if thats not plugged in iTunes cant find the music, therefor cant play my music.) and then a pop up messege from windows said "iTunes has stopped working" and it didnt give me any other choice but to close the program.
First we need to check your precise version number, Katy. In iTunes, go "Help > About iTunes", and wait for the version number to scroll up from the bottom of the screen.
If it says *iTunes 10.1.0.54,* we need to update you to iTunes 10.1.0.56. The 10.1.0.56 version may not show up for you in Apple Software update, so you'll probably need to get the 10.1.0.56 installer from the Apple Website, as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

Hi, can anyone please help, ive been on hold ?call for 2hrs this morning !!! GRRR

Telstra has been billing me for additional $250 per month for April and May. You have confirmed that i have been overcharged but the total on screen does not confirm this. The telstra call centre in the Phillipines has just confirmed that i have been on hold and on a call for 1 hr 58 mins!Why is this so hard to fix?????I have wasted over 4hrs on this problem !!!!This is Frustrating the **bleep** out of me !!!!!!!!!!!!!!!!!!

Hello there! Being put on hold for that too long is really frustrating and I know how it feels.I may provide some ideas on how to solve that issue, however, it will not assure you that any of these solutions can solve any of your concern.. Have you checked your account online?Does your device usage justify the amount being charged at your account?
Have you ever enrolled in some plans or promos lately?Have you made any downloads in the net which requires money transactions?Have you checked your data limit if you gor over it?Have you connected your account in some websites that requires money transactions?
If you ever answered YES to any of those questions,better HAVE your ACCOUNT USAGE on your SCREEN and TRY TO REMEMBER your TRANSACTIONS.. or Call Customer Service Representative and tell them to forward your call to the collections department... *there are instances where in an account user device makes downloads over the net without the authorization of the account holder.
HOPE THIS MAY SOLVE YOUR CONCERN, Regards,

Excel Get ActiveX References.vi and closing references -- grrr

I'm new to ActiveX stuff, but eager to learn!
The "grrr" in my Subject line is a reference to how I feel about LabVIEW's documentation from time to time. I'm a dinosaur who came from text-based programming, and did a fair amount of C coding, so sometimes with LabVIEW I'm left with this awful feeling in the pit of my stomach like, "Good grief! How much memory must LabVIEW be hogging up in the background when I use this vi?" or "What happens to those variables (wires) in that subVI when it completes but doesn't close? What are their statuses when I come back in the next time?" or "What if I put a lot of elements into that array the first time and then started from element zero the second time and just put in a few? What has happened with the memroy that was allocated when there were a lot of elements?"
Today I'm stewing about this "Excel Get ActiveX References.vi," and what happens to the "ActiveX references" it generates each time I call the subVI in which "Excel Get ActiveX References.vi" lives. I think that at least one of the "ActiveX references" it generates when I call it is of the type Excel._Application. Then there appears to be an Excel._Workbook, and others. You see, I've used "Excel Easy Report.vi" to put some data into an Excel spreadsheet, and I want to tell Excel to do a "Save" on the open spreadsheet. I think ActiveX is the (a) right way to do that, so I'm wading into the ActiveX fray... But this "Excel Get ActiveX References.vi" says in its help file, "Do not close ActiveX references opened with the Excel Get ActiveX References VI. References must remain open until the report is closed. Otherwise the error 3001 will occur." Well, these Excel workbooks that get created by my VI could well stay open until after my LabVIEW VI terminates!
So (finally), here are some of my quesitons:
1) When I go through my subVI once, pointing to one workbook, I'll get one set of references "created" or "opened" or whatever you call it when ActiveX references spring into existance. Now, when I exit the subVI, is it going to automatically try to "close" those ActiveX references? I don't suppose so, since subVI's stay in memory until the calling VI closes.
2) Now, I come back into my subVI a second time. New workbook gets created, so I get new references. Ok, fine. Uh oh! What happened to those old references? I suppose that if I didn't somehow save them off, I've probably lost the ability to get them back (maybe I'm wrong, but I don't need them back), but is LabVIEW going to "close" those old references (from previous times through the subVI) because I can't get to them anymore? Won't that cause the dreaded error 3001? If LabVIEW is not going to "close" them, what in tarnation happens to them (the old C programmer in me creeping back out)?? Now it's some oddball, orphaned reference, floating out there, hogging memory, waiting to make something crash intermittently and be a debugging nightmare?
3) Now, here's the real scary one. I think I might dodge the "error 3001" bullet in questions 1) and 2), but now let's say the user closes my LabVIEW application while Excel is still open. All those workbooks are still open. Presumably, all those ActiveX references I was not supposed to close are still open. I really hope that LabVIEW is decent enough to close/erase/delete/blow-away (whatever the right word is) all those ActiveX references which were opened/created by "Excel Get ActiveX References.vi" when my program terminates. But, oh no! Won't the error 3001 come along then? I suppose I can just dump it in the shutdown error handling.
Well, thanks for reading my novel. I don't know what can be done with LabVIEW documentation to make it more satisfying to folks like me, but perhaps someone can weigh in on all my ActiveX questions here.
Thank you in advance,
Steve Brady
Solved!
Go to Solution.

You need to close EVERY ActiveX reference you open. If you don't you'll end up with some Excel processes running even after LabVIEW exits. You can see them in Task Manager.
I, personally, don't like the LabVIEW Report Generation Tool Kit for working with Excel. I don't think it's flexible enough. I have a growing library of VIs that I've written that open, manipulate, and close Excel. Some references I pass from VI to VI and some I close right after I use them. It all depends on what I'm doing. If I want to enter read or write data from/to a certain range I'll get the range reference, read or write the data, then close it right away because I have no use for it any more. On the other hand, when I open Excel or a Workbook I keep the reference until I'm done, which could be later in the program.
1) When I go through my subVI once, pointing to one workbook, I'll get one set of references "created" or "opened" or whatever you call it when ActiveX references spring into existence. Now, when I exit the subVI, is it going to automatically try to "close" those ActiveX references? I don't suppose so, since subVI's stay in memory until the calling VI closes.
2) Now, I come back into my subVI a second time. New workbook gets created, so I get new references. Ok, fine. Uh oh! What happened to those old references? I suppose that if I didn't somehow save them off, I've probably lost the ability to get them back (maybe I'm wrong, but I don't need them back), but is LabVIEW going to "close" those old references (from previous times through the subVI) because I can't get to them anymore? Won't that cause the dreaded error 3001? If LabVIEW is not going to "close" them, what in tarnation happens to them (the old C programmer in me creeping back out)?? Now it's some oddball, orphaned reference, floating out there, hogging memory, waiting to make something crash intermittently and be a debugging nightmare?
3) Now, here's the real scary one. I think I might dodge the "error 3001" bullet in questions 1) and 2), but now let's say the user closes my LabVIEW application while Excel is still open. All those workbooks are still open. Presumably, all those ActiveX references I was not supposed to close are still open. I really hope that LabVIEW is decent enough to close/erase/delete/blow-away (whatever the right word is) all those ActiveX references which were opened/created by "Excel Get ActiveX References.vi" when my program terminates. But, oh no! Won't the error 3001 come along then? I suppose I can just dump it in the shutdown error handling.
1) No, LabVIEW will NOT close those references. You need to make sure that happens.
2) You can save the references in a functional global or use a class but if you're not going to save them close them as soon as you're done with them.
3) Your user should not be able to close your LabVIEW application without it going through the shutdown routine you've created for your program. The ABORT button should never be exposed to the user and you should capture and discard the panel close event so your program ALWAYS shuts down is an orderly fashion. If you don't you will have fragments of Excel hanging around in your operating system and will have to kill those processes using Task Manager. That should only be a problem during development, not once deployed.
I used to program in C and Assembly many moons ago. You should have seen my first LabVIEW code. I go back and look at it just so I can see how far I've come in the last 12 years. I feel your pain.
Kelly Bersch
Certified LabVIEW Developer
Kudos are always welcome

Somehow my entire itunes library got deleted ... I have the old ipod nano, which does not connect with iCloud so it has all been saved there, BUT .. I cannot load all my music that I put on and I no longer have the cd's PLEASE HELP!!!!

PLEASE HELP!!! Somehow my entire iTunes library got deleted, and I cannot sync all my music that I put on from cd's (which I no longer have). All the purchased music has been synced, but nothing else! All my other devices are synced with iCloud and lost the material as well ... I am so frustrated, because the nano has not been working properly, and I am afraid of losing it forever, and of course the cd's I backed everything with are MIA!!!! GRRR! Please HELP!!!
Thank you so much!

I can't tell from your post what you have and what you don't have. Are you saying the files are no longer on your computer, no longer on your iPod, or both?

I am having issues and close to just returning the darn thing....HELP

Hello all I need some help,
I have the TC set up to extend my wireless network, which it is doing fine.
After a few attempts of it dropping the connection for backup I finally started over and got it to work last night. Even waited tell it went through to wireless back ups after I had it connected via ethernet. Don't know if the ethernet was working or not. Yet it was faster and only took 10 hours to do 62.5 GB so I assume it was over the ethernet. Well I went to sleep after that and it never did another back up. The machine was still awake (I have the MBP not going to sleep while power cable is plugged in for the duration of this trial.)
The ERROR message I got was the disk image could not be mounted. I am getting the same error message from my wife's MBP as well. This was after probably close to 40 minutes of it "preparing". Now it says "Next backup: When Mac is plugged in". This is for her computer. Mine says it well be at 1307 but when I try to do it manually it says "preparing" for a few minutes then the error and the disk image can not be mounted.
Now there is an image of "Backup of Sean King's MacBook Pro 15"" like it is a external device but after doing all this I have tried to "eject" but it says it is open and in use can not eject.
Grrr. :O)
Sean

I am with you. I am used to things working out of the box which is why I pay a premium for Apple products. I am tech savvy and haven't been able to get this thing to work.
I even reinitialized the disk and tried a full backup and it just won't do it. Gets several gigs in and just gives up. No real information on why its giving up.
Sounds like not really ready for primetime.
I may return mine too.

ITunes has deleted all my music except for the genre I was listening to yesterday. It has also deleted my purchased movies and all my podcasts and playlists. Grrr

iTunes has deleted all my music except for the genre I was listening to yesterday. It has also deleted my purchased movies and all my podcasts and playlists. Grrr. Is there a way to find it all again???

Hey there MotherMarthaMayhem,
Welcome to Apple Support Communities.
This article provides information and troubleshooting tips that may help you find the media that recently went missing from iTunes on your MacBook Pro.
iTunes: Finding lost media and downloads - Apple Support
Cheers,
-Jason

Cannot enable "Apple Mobile Device" in Services for Windows 7 64-bit. Please Help!

Hi,
First post here, but I've been trying to figure out a solution towards iTunes opening my iPhone 4 so I can sync it. But every time I sync it, it gives me a message saying "This iPhone cannot be used because the Apple Mobile Device service is not started".
To try and resolve this, I tried the enabling "Apple Mobile Device" in services method, but when I try to start the service again, I get yet another message from Windows saying "The Apple Mobile Device service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs".
At a first glance, I thought I needed iTunes to be running my iPhone whilst I try to turn the service on, but all I get is the same message saying "The Apple Mobile Device service on Local Computer......", either if the device is connected and attempting to run or not.
This problem appeared out of nowhere when I plugged it in, just to sync some songs and pictures to it. So I don't know what's causing this issue!
And yes, I uninstalled iTunes 10.4.1 and Apple Mobile Device and then reinstalled them. But the issue still continued. Grrr......
It has lasted a stressful 3 days now and if anyone knows a solution or can find one, please let me know as soon as possible.
Many thanks,
Martin.

bfin wrote:
When I try to get the one off the website it downloads the 1020 printer driver and it will not work for me. I need this for school asap so please help
Hi,
Please try this, this is for 1022
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=uk&prodNameId=439431&p...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

GRRR--HELP

Similar Messages

Maybe you are looking for