Grub won't boot Windows

Hello,
I have two hard drives. One with Arch with four partitions (sda1, sda2, sda3, sda4) and one with Windows XP Pro (sdb1 , one partition). When I try booting to Windows with the following configuration, nothing happens. No error, just a frozen (or what it seems like) grub with the Windows launcher lines (rootnoverify (hd1,0) ; makeactive ; etc).
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
# (1) Arch Linux Fallback
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26-fallback.img
# (1) Windows
title Windows
rootnoverify (hd1,0)
makeactive
chainloader +1
Everything looks good to me. Sine Windows is on sdb1, first partition, it would be (hd1,0), right? Anything else I should look at?
Thanks.

Check out this page:  http://wiki.archlinux.org/index.php/GRUB.  Go to the section on windows on another disk.

Similar Messages

  • Windows HP laptop won't boot Windows - possible hard disk failure!

    Hi there!
    A month ago my HP Pavilion dv6-6b57sa completely froze mid-use, and was unable to move the mouse or get any sort of response.
    Naturally I held the power button to hard shutdown and restarted. Ever since then I have been unable to boot Windows 7 (the original OS) properly, and all I could get to was a Startup repair which took days to try to fix the issues, eventually coming up with a message saying it was unable to fix the errors.
    Today I decided to ditch the data I had stored and do a fresh install - using the HP wizard by pressing F11 on boot and using a newly created USB Windows 7 install drive. After getting to the point of install process of Windows just loading the files, after choosing a hard drive partition successfully etc. the installation quit, citing a number of issues (screenshots link are below).
    So I then try to restart the computer, and get a 'SMART Hard disk error' (screenshot link below) and when I select continue startup from there, it says Windows failed to start (screenshot link below) and then leads to me to the Startup repair manager again - which fails again - (screenshot link also below!)
    So after doing a hard drive test, it says it has failed (screenshot link also below).
    So what can I do? Is there a serious hardware related issue linked with the hard drive (which is bound to cost lots of £££ I bet), or are there further steps I can take?
    Screenshot links: http://1drv.ms/1jnjviU
    Many thanks for your help in advance,
    Max

    Yes and you had to at the moment since you won't have a key unless you buy one from Microsoft for about 99 dollars.
    Try you best to get the key readble I mean try to read it, good luck!
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • UEFI-only Won't Boot Windows Installation DVD

    As you can see from my topic subject, my W520 laptop won't boot from my Windows 7 Installation DVD when it is set to UEFI-only mode. I don't get any errors or anything, the screen just goes black for a second and returns to the Boot Menu, when I select the DVD drive. For what it's worth, my hard drive is already GPT partitioned, and I need to repair the installation.
    Before I ask for help, I just want to mention that I created this particular Windows 7 Installation DVD using the All-in-One tutorial so that I could have 32-bit and 64-bit options all on the same disc. The disc booted fine in "Legacy/UEFI" boot mode, so I'm not sure what the problem is. Does anyone have insight into this?
    EDIT: I've been following this tutorial: http://www.insanelymac.com/forum/index.php?showtopic=186440 and am at Step 14.
    ThinkPads and SSDs: Part 1 Part 2 Part 3
    Solved!
    Go to Solution.

    The UEFI/BIOS is the first thing I updated on the computer, so mine's 1.22. I wish it were that easy, though Could 1.22 have re-introduced the problem?
    EDIT: Holy smokes! There's another version of the UEFI-BIOS already Unfortunately, my hard drive is stuck in limbo! It's now partitioned in GPT and needs to be repaired. I'll use the bootable BIOS cd and report back if the new version works
    ThinkPads and SSDs: Part 1 Part 2 Part 3

  • Bootpicker Won't Boot Windows on MacBook Pro

    +We use bootpicker on iMacs, MacBooks, Minis and haven't had any problems until now. Suddenly the late 2008 MacBook Pro won't boot into Windows from bootpicker.+
    +It's exactly the same problem described in this archived post that I've quoted below. Same log message as well.+
    +Anyone found a solution for this?+
    *Bootpicker doesn't reboot automatically on Windows selection*
    Posted: Oct 17, 2008 3:00 PM
    Hi all! Yesterday I installed Bootpicker (2.1.2) which now is provided by Apple (http://www.apple.com/education/it/bootpicker/) to select between Mac OS X 10.5 and Windows (Boot Camp).
    It works fine except following: The Bootpicker menu is displayed after loading Mac OS X directly before Mac OS's login dialog. When I pick Mac OS the Mac OS login dialog is displayed - fine. When I select Windows, also the Mac OS login dialog is displayed. I had expected that in this case Bootpicker will automatically reboot the machine to start up from the Windows partition. Instead I have to manually select the reboot button in the login dialog.
    I think there is something wrong. The /Library/Logs/bp.log says following:
    17:55:43 BootPicker: Initiating.
    17:55:44 BootPicker: Configuring interface for Windows volume/device: /dev/disk0s3
    17:55:46 BootPicker: User chose Windows.
    17:55:46 BootPicker: Bless args: (
    "--device",
    "/dev/disk0s3",
    "--setBoot",
    "--legacy",
    "--nextonly"
    17:55:47 BootPicker: Flagging slice 3
    fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
    Enter 'help' for information
    fdisk: 1> Partition 3 marked active.
    fdisk:*1> Device could not be accessed exclusively.
    A reboot will be needed for changes to take effect. OK? [n] Writing MBR at offset 0.
    fdisk: 1> 17:55:47 BootPicker: Terminating.
    May be the unsuccessful configuration of the MBR causes the failure? Any other experiences or suggestions?

    I think that the issue might be that there is no boot0 in /usr/standalone/i386. I have had similar issues lately when trying to make a bootable usb memory. I think this is necessary for the legacy option in the bless utility. If some one have a solution for this I would like to know as well.

  • HELP...HP Mini 110 Won't Boot Windows !?!?

    Hey Everyone,
    Please read in full and thanks for taking the time to read my problem.
    I have a HP Mini 110 - 1100 running on Windows XP. Recently while using my computer, it started to get slow and eventually freeze. Even though I tried to shut down properly, I couldn't and was forced to reset by holding the power button. I've had to do that very few times in the past and usually everything ends up okay. But not this time ! The computer loaded and came to a black screen where the choices of (Safe Mode, Safe Mode w. Networking & Command Prompt, Last Known Configuration and Start Windows Normally) were displayed. I tried Last Known Configuration but as the OS was loading, the Windows XP screen froze, the BSOD (Blue Screen) quickly flashed, and the computer automatically rebooted. This resulted in a reboot loop that was never ending.
    STEPS IVE TAKEN:
    1. I tried to enter Windows through all the aforementioned choices.
    2. I pressed F10 to enter the BIOS in which I restored all default settings.
    3. Attempted to do a hard reset & nothing happened..may have done it wrong...but I tried several times.
    4. Pressed F8 (holding down & pressing repeatedly) to get to the "Windows Advanced Options Menu: (http://devilsworkshop.org/files/2009/06/68224pick-last-known-good.gif)" but the Boot Manger came up instead:
    Here, it asks me to choose an OS which is Win XP, and when chosen loop begins again.
    From here, I pressed F6 accidentally which took me to the Roxio BackonTrack recovery. I restored with last available saved settings (Apr 26).
    5. I took a Hard Disk Test in the BIOS which showed positive results...right?:
    Passed - Restart the system (10000)
    SOME OBSERVATIONS:
    1. I enabled Instant Web so I can at least use something and it works. I'm actually using it now to post this.
    I am able to establish a wireless connection.
    I can view/listen to pictures/music that I have on my computer. Yet, I am unable to retrieve it for backup.
    Instant Web recognizes my USB/SD connections.
    Instant Web is syncing time with Main OS...does this show OS is still in working order?
    THINGS TO POINT OUT:
    1. Because the blue screen comes and goes so quickly, I am unable to aquire any error messages.
    2. I did have Anti-Virus installed which scans for viruses everyday and nothing ever came up as a virus.
    3. Everything was working perfectly right before this situation occured.
    4. There is no CD Drive built in nor do I own an external harddrive.
    As you can tell, I've tried various methods, but nothing seems to solve this.
    Overall, my computer seems to be in a healthy state with working parts so I am confused on why the computer won't boot past the windows xp screen !
    What could be the issue casuing this?
    What steps can I take to solve this?
    What is the proper way to get to the Windows Advanced Options Menu on a Hp 110?
    Is something corrupt...What are HP 110's recovery options?
    If you need any more specific information about my issue, just let me know!
    I appreciate you all for reading this and please help assist me & contribute in any way that you can.
    Thank You!

    I'm going with simple corruption of the hard drive boot files. A chkdsk C: /r will likely fix it.  If you can get into safe mode command prompt you can run that command from the prompt and it should scan the hard drive and repair any file system errors. You apparently have no mechanical problem with the hard drive (i.e. bad sectors). 
    if you cannot get into Windows via safe mode (it looks like maybe you have tried that)....you may need to get a copy of somethign like Hiren's boot CD:
    http://www.hiren.info/pages/bootcd
    Or any kind of a Windows preboot environment CD or memory stick to boot the computer and run chkdsk c: /r from the command line. 
    http://www.nu2.nu/pebuilder/

  • (solved) Grub won't boot Vista

    Hi!
    Just installed Arch Linux and it is great. But after installing Arch I'm not able to boot Windowas Vista. I googled it and added Windows to /boot/grub/menu.lst. Now there is an entry for Vista, unfortunately the bootprozess fails.
    Vista is sda1 and I'm able to mount the partition. So it shouldn't be damaged.
    Grub says:
    Booting `Microsoft Vista'
    root (hd0)
    Filesystem type unkown, using whole disk savedefault
    Error 15: File not found
    Press any key to continue
    After running fdisk:
    Platte /dev/sda: 160.0 GByte, 160041885696 Byte
    255 Köpfe, 63 Sektoren/Spuren, 19457 Zylinder
    Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
    Disk identifier: 0x28caa9e7
       Gerät  boot.     Anfang        Ende     Blöcke   Id  System
    /dev/sda1   *           1       11675    93773824    7  HPFS/NTFS
    /dev/sda2           11676       18941    58364145   83  Linux
    /dev/sda3           18942       19457     4144770   82  Linux Swap / Solaris
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    #  Linux           Grub
    #  /dev/fd0        (fd0)
    #  /dev/sda        (hd0)
    #  /dev/sdb2       (hd1,1)
    #  /dev/sda3       (hd0,2)
    #  FRAMEBUFFER RESOLUTION SETTINGS
    #     +-------------------------------------------------+
    #          | 640x480    800x600    1024x768   1280x1024
    #      ----+--------------------------------------------
    #      256 | 0x301=769  0x303=771  0x305=773   0x307=775
    #      32K | 0x310=784  0x313=787  0x316=790   0x319=793
    #      64K | 0x311=785  0x314=788  0x317=791   0x31A=794
    #      16M | 0x312=786  0x315=789  0x318=792   0x31B=795
    #     +-------------------------------------------------+
    #  for more details and different resolutions see
    #  http://wiki.archlinux.org/index.php/GRU … Resolution
    # general configuration:
    timeout   10
    default   0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # (1) Windows
    hiddenmenu
    default 0
    timeout 1
    # (0) Arch Linux
    title Arch Linux
    root (hd0,1)
    kernel /boot/vmlinuz26 resume=/dev/disk/by-uuid/05aee231-ac3d-4a06-8b9e-d51242502eba root=/dev/disk/by-uuid/c38463d4-b802-419a-8255-771cbf290be6 ro
    initrd /boot/kernel26.img
    # (1) Arch Linux Fallback
    title Arch Linux Fallback
    root (hd0,1)
    kernel /boot/vmlinuz26 resume=/dev/disk/by-uuid/05aee231-ac3d-4a06-8b9e-d51242502eba root=/dev/disk/by-uuid/c38463d4-b802-419a-8255-771cbf290be6 ro
    initrd /boot/kernel26-fallback.img
    title Microsoft Vista
    root (hd0)
    savedefault
    chainloader +1
    makeactive
    Greetings and thanks in advance!
    hendrikalexander
    Last edited by hendrikalexander (2009-11-30 19:24:34)

    Remove the savedefault and see if you can boot into Vista
    I don't know if this makes a diffrenence but in the wiki makeactive comes before chainloader+1
    title Microsoft Vista
    rootnoverify (hd0,0)
    makeactive
    chainloader +1
    Last edited by M177ER (2009-11-30 19:16:09)

  • Edge 72 3497-2HG won't boot windows 7

    Hello,
    I've bought 5 sets of ThinkCentre E72 (same model)  to my company. First PC was unpacked and configured to work. Then made a recovery discs for windows 7 (windows 8 included on dvd). My idea was to prepare Norton Ghost copy of hdd to deploy it on rest of desktops. So prepared a 500GB hard drive and made a disc to disc copy. Next,  hard drive migrated to next pc and copy applied. But when it's starting from scratch only black screen and flashing cursor is blinking, no system boot. So I've used a created recovery on previous thinkcentre but with no luck after reboot. Same black screen and cursor.
    How to restore preinstalled windows 7 on ghosted machine ?
    Can any help me resolve this problem ?

    Fixed the problem with this setup
    Of course this means i just lost 4GB.
    Let me tell the full story.
    In the beginning, long ago, once upon a time. My iMac had 2x2GB ram sticks which were in the two DIMM1 Banks. I then told myself "I WANT MORE RAM BECAUSE LOLZ". So i bought 2x4GB ram sticks. The two empty slots were Bank 0/DIMM0 and Bank 1/DIMM 0. and I added them in there. having done that, I booted OS X up, worked great, had 12GB, everything was shiny and beautiful. Soon after I wanted to try it out on windows. I restarted my computer and BAM the blinking cursor just sits there, being stubborn and all. I then told myself "holy balls, this new ram i got is bonkers" (them words, I blame the language filter). Then after giving it a little thought, i just asked myself if it was because I had ram from two different manufacturers. I removed my old ram, which has nice Samsung stickers on them, and booted it up on windows. Still had the same problem, I then decided that maybe this is all really mentally challenged so to win I had to think like a retard. I took my new ram and inserted it in the same slots where my old ram sticks were (DIMM1 Banks), booted windows up and IT WORKED.
    I still hold all of my WHYs on this subject but I will keep messing around to see if I find a better solution than just leaving both DIMM0 banks empty

  • My laptop won't boot Windows

    I have a Toshiba satellite P755-s5265 Windows 7. It's been acting strange for the last couple of months especially whenever I had a USB mouse or was using Chrome.  By strange I mean the mouse cursor will jump or stick and sometimes it would run slow even if the CPU usage and RAM were really low. One time, about a month ago, the whole system crashed and I got a blue screen. I restarted it and it started fine. I uppdated my drivers and switched to a different USB mouse. Everything was working fine until Saturday. On Saturday, it started doing the same thing again then crashed again. When I tried to restart it wouldn't start. I've tried everything to get it it restart including safe mode etc. Nothing has worked. 
    I got some advice to save my files before resetting it. I loaded ubuntu (for the purpose of saving my files) from a disk and it runs ubuntu with no problems. I can even connect to the intenet. I haven't been able to save my files but that just comes with my lack of knowledgde of ubuntu I guess. But, it still won't run Windows. I've tried to load it from the Windows restore disks and it won't load. I read somewhere that they had to be "bootable" but I don't really know how to do that. I tried to make a bootable disk with IMGBurn but I don't which files to use or how to do it. 
    Right now, if I try to start it, I get a blank black screen with nothing visible except the cursor. 
    I've tried every option under F8 and get either the same black screen or a black screen that says "BOOTMGR missing" 
    I've tried the HDD recovery command under F12 and get the same blank screen. 
    I think I've switched every optiom on the Bios menu and gotten no real change. 
    If I hold down the 0 button I get  "BOOTMGR missing" 
    I would be fine with resetting the laptop if it would just work. There isn't really anything THAT important on there. I just need it to work and I can't use ubuntu for what I need it for. 

    Satellite P755-S5265
     I haven't been able to save my files but that just comes with my lack of knowledgde of ubuntu I guess. 
    Maybe this helps.
       HOWTO Recover Files from a Non-Bootable Windows PC using Ubuntu Live
     I've tried to load it from the Windows restore disks and it won't load. 
    For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
       Satellite/Satellite Pro P700 Series User’s Guide
    -Jerry

  • IMac won't boot windows 7 after ram increase to 12gb

    Hi all, just wondering if anyone has has a problem trying to load up windows 7 in boot camp after installing 2 4gb sticks of ram in their iMac. I have a iMac intel core 2duo and the ram is working fine in OSX. When I try to boot up in windows it just sits on the black screen with the flashing icon. I took the extra ram out and it booted up just fine. The version of windows 7 is the ultimate edition 64bit.
    Any help would be great
    Thanks
    Mike

    Fixed the problem with this setup
    Of course this means i just lost 4GB.
    Let me tell the full story.
    In the beginning, long ago, once upon a time. My iMac had 2x2GB ram sticks which were in the two DIMM1 Banks. I then told myself "I WANT MORE RAM BECAUSE LOLZ". So i bought 2x4GB ram sticks. The two empty slots were Bank 0/DIMM0 and Bank 1/DIMM 0. and I added them in there. having done that, I booted OS X up, worked great, had 12GB, everything was shiny and beautiful. Soon after I wanted to try it out on windows. I restarted my computer and BAM the blinking cursor just sits there, being stubborn and all. I then told myself "holy balls, this new ram i got is bonkers" (them words, I blame the language filter). Then after giving it a little thought, i just asked myself if it was because I had ram from two different manufacturers. I removed my old ram, which has nice Samsung stickers on them, and booted it up on windows. Still had the same problem, I then decided that maybe this is all really mentally challenged so to win I had to think like a retard. I took my new ram and inserted it in the same slots where my old ram sticks were (DIMM1 Banks), booted windows up and IT WORKED.
    I still hold all of my WHYs on this subject but I will keep messing around to see if I find a better solution than just leaving both DIMM0 banks empty

  • [solved] grub won't boot unless live cd is inserted

    Hey everyone,
    I'm trying to get Arch working on my home computer, however I'm having troubles getting grub to boot. After following the beginner's guide and running through the usual steps, I restarted my computer to boot into my dual-booted Arch/Windows computer. However, every time I try to boot, it fails, reboots, and tries again. Here's what I see on my screen moments before it reboots:
    Loading Operating System..
    Boot from CD/DVD :
    GRUB loading..
    After that, it reboots. However, if I insert a live CD of arch and select "Boot existing OS", I get
    Booting..
    GRUB Loading..
    Welcome to GRUB!
    and then it goes straight to grub. Does anyone know how I could best start to debug this issue, so that I don't need the live cd just to boot into grub every time?
    Thanks!
    Last edited by bacongobbler (2014-01-04 10:49:51)

    jasonwryan wrote:
    bacongobbler wrote:I have my CD set as first to boot, but that hasn't been the issue before. I've had both Ubuntu and Debian installed in this configuration and grub would boot in both cases, but not the case with arch.
    And what happens if you change it?
    It was a hard drive boot priority issue. It had nothing to do with the CD having first boot priority or not. I have two drives, and it was attempting to boot from /dev/sdb first, which was the incorrect drive. Switching boot priority between the two drives fixed this. I'll update the topic.
    Last edited by bacongobbler (2014-01-04 10:48:34)

  • [SOLVED] Grub won't boot into Arch...

    So, this all started when I got this wacky idea of trying Debian on a separate drive.
    Installs great, boots up and get a blank screen with blinky cursor..not in the mood to mess with it since I can't find
    a reasonable answer for what is wrong with it sooo I boot back into Arch but now I get Error device not found with a "Grub Rescue>" prompt.
    Not sure what to do now. I installed grub to the drive I was installing Debian on but it seemed to screw with my precious Arch too
    I looked around the forums for help but couldn't find anything.
    Also, it goes from post directly to the Grub Rescue prompt
    Last edited by PumpkinJack (2011-08-26 07:59:37)

    edit:
    ok here it is:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/6ab6f3ca-2c64-4264-97aa-10819e4561ed ro
    initrd /initramfs-linux.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/6ab6f3ca-2c64-4264-97aa-10819e4561ed ro
    initrd /initramfs-linux-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd0,0)
    #makeactive
    #chainloader +1
    Last edited by PumpkinJack (2011-08-26 02:42:08)

  • Grub won't load Windows

    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/e33818c9-a658-448a-aa7a-0daa49d7c138 ro
    initrd /kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/e33818c9-a658-448a-aa7a-0daa49d7c138 ro
    initrd /kernel26-fallback.img
    # (2) Windows
    title Windows
    rootnoverify (hd0,2)
    makeactive
    chainloader +1
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 12 96358+ 83 Linux
    Partition 1 does not end on cylinder boundary.
    /dev/sda2 13 8249 66163702+ 5 Extended
    Partition 2 does not end on cylinder boundary.
    /dev/sda3 * 8250 9729 11884320 7 HPFS/NTFS
    Partition 3 does not end on cylinder boundary.
    /dev/sda5 13 42 240943+ 82 Linux swap / Solaris
    /dev/sda6 43 954 7325608+ 83 Linux
    /dev/sda7 955 8249 58597056 83 Linux
    My windows is on /dev/sda3, the partition is primary. The installation is in tact as far as I can see when I browse it. I get no error message when I try to boot into Windows, it simply stalls and I just see the Grub info, "title Windows" etc.
    Thanks for the help, hope you guys can fix me up!

    RetroX wrote:GRUB can't chainload off extended partitions.  Not sure about GRUB 2, though.
    It's not an extended partition.
    One weird thing is cfdisk and fdisk see it as a NTFS partition, where as parted sees it as "linux-swap"... probably not significant but worth mentioning.
    Last edited by jayjay44 (2009-10-23 07:29:06)

  • HP Pavilion dv7-1285dx - No F11, Won't Boot Windows -- Recovery Manager PATH?

    I am repairing an HP Pavilion dv7-1285dx for a friend. I have restored countless other computers but this one has driven me up the wall after 7 hours of trial and error and web searches.
    Here's the deal:
    --The computer came with Windows Vista
    --The owner upgraded it to Windows 7 this past fall
    --The comptuer came in contact with malware and will not boot
    --When booting, the computer will slowly attempt to load Windows, will make it to the "welcome" screen, then restart itself, creating an infinite loop
    --I do have a recovery DVD for the computer; the owner burned it apparently in late 2010
    --I am proficient in MS-DOS and am comfortable using the command prompt
    --The command prompt is the only way I can operate this computer at the moment. I do not have access to Windows of any sort, let alone the web
    --I do have two other computers here that are mine, both are Macs and one dual-boots into Windows; I do have a few flash drives and can burn optical media if necessary
    The F11 key does not work on this computer to bring up the recovery manager. I know why, too--the machine was upgraded to Windows 7, which wiped out the connection between the key and the program.
    My hope is that I can find the path of the recovery manager somewhere. There was a windows.old directory on the drive; I was able to change it to Windows (the existing Windows was renamed windows.scrap).
    This enabled me to at least get to an OS selection screen. There were three options: 7, 7 (recovery), and Vista (recovery). None of them are able to get me into Windows. The Vista option states it is corrupt while both 7s will try to unsuccessfully repair themselves.
    I can, however, access the command prompt through the Windows recovery program (NOT the HP recovery program, which I need to restore anything from either the partition on the D: drive or the DVD).
    I did notice all of the files on the DVD were in .zip format once I got deep enough in a directory. I'm debating about extracting them on one of my other comptuers to see if I can just get them over on another device, but my only external hard drive is Mac formatted so I'll have to use a USB stick.
    There have been queries about this out there referring to making the D: partition active. However, all of these solutions require Windows, which I cannot use. The same is true of downloads.
    My biggest question--where could the recovery program be buried? I would be willing to bring files over on another device IF AND ONLY IF THEY DO NOT REQUIRE WINDOWS.
    The SMINST directory within Program Files (x86) is not present.
    Basically, I need a DOS-compatible, non-Windows, way to restore this computer.
    I have no other Windows installation discs for the machine currently with me. Also, the COA sticker on the bottom of the computer is extremely worn and I can only read a few digits of it, so I can't use that for a restore I guess.
    On a final note--the fan in this comptuer is extremely annoying; any way to turn it off besides just the switch in the BIOS that toggles whether it runs all the time?

    You don't need to be in Windows to mark the D:\Recovery partition Active. Just boot with a utility cd with the disk management capability. If you don't have one_Scroll down on the page and get>> Bootable CD  If you don't have a burning app that can burn an ISO to cd get>> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is> Here. Once created, boot from it.
    Btw-have you tried booting from his Vista Recovery DVD? With the first disc in the CD/DVD drive power on the laptop and immediately tap Esc to bring up the menu. Then tap F9 Boot options. Use the arrow key to move down & highlight the Optical drive then tap Enter key. (No key is needed with Recovery DVDs)
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • IPod Classic won't boot, Windows wants to reformat it, iTunes ignores it.

    Hello everyone, hopefully someone can help. I was using my 80Gb iPod Classic as a portable hard-drive today at school, when, during a file copying process, it told me to please insert a disk drive. I safely removed it, and plugged it back in. It displayed the Apple logo, then said "connect to iTunes to restore". I took it back home, and plugged it in. In My Computer it appears as a Removable Disk, and double-clicking it, a window pops up telling me to reformat the disk drive.
    iTunes does not detect it, and I've updated the iTunes software, still no luck. The iPod itself doesn't turn on properly, I can get into the diagnostics windows, and everything seems to be working fine there. When in the reformating window, there is no option to set it as FAT32 file system, and the capacity is unknown.
    I think there's probably a corrupted file preventing it from booting, but I'm not sure. Any help is greatly appreciated, and thanks in advance.

    When the iPod is connected to iTunes, look on the Device/Podcasts section and make sure Sync Podcasts is on.

  • N500 won't boot windows xp after flashing BIOS

    Hi, I purchased an N500 a couple weeks ago, it's been running fine on xp, except occassionally I'd get disconnected from the internet (a line problem, not the computer, happens here in egypt) but the wireless would not automatically reconnect to my line once the line was back up.  The log file for the wireless card said something like "unable to set proper band" when this happened.  Anyway my driver version was the latest version, so I thought maybe I needed to update bios.  So I flashed bios using the flashbios utility that is listed on the lenovo website in the download section dedicated to my laptop model.  The laptop then restarted itself, and then I got the black screen that says "We apologize for the inconvenience, but Windows did not start correctly...." blah blah blah.with options to start up in safe mode, last known configuration that worked etc.  However when I choose ANY of these options about 3 seconds later I get the blue screen of death, and the computer restarts!  So how do I get myself out of this mess!  Thanks Lenovo for that great Flash utility by the way!!

    Try reinstall the OS. I hope it works. My opinion is when you update BIOS, The OS detected as a new computer (for some pcs). Try repair The OS with boot from CD.
    Good Luck,....

Maybe you are looking for