Grub2 booting only bootcamp

J'aimerais remplacer Nt bootloader par grub2 en l'installant soit en complément de efi dans sa partition, soit dans la MBR hybride... étant donné que grub2 ne supporte pas une installation sur le NTFS.
Pour le moment mon disque est comme ceci:
Fat32 EFI system 200mb
HFS+ Mac OSx partition 339gb => avec rEFIT installé dessus
#Une partition non reconnue de 618,89mb La MBR hybride je suppose#
NTFS Bootcamp partition 64,11Gb
Le but : Utiliser setPCI dans grub2 pour activer l'ahci et forcé l'installation de la seconde carte graphique.
Ma question est la suivante, ou installer grub2 pour que rEFIT le détecte. Et qu'il m'offre la possibilité de démarrer windows en touchant a EFI etc le moins possible. (cela inclu la création d'une nouvelle partition qui désynchroniserait la table gpt écrite dans la MBR hybride.)
L'installation de grub2 sur clé usb est une solution que j'ai envisagée, cela dit admettez que c'est pas super pratique.

Pardon the Google translation:
I don't know much about what you want to do, but Boot Camp has nothing to do with Classic operating systems. I've requested this thread be moved.
Pardonnez la traduction de Google:
Je ne sais pas beaucoup sur ce que vous voulez faire, mais Boot Camp n'a rien à voir avec les systèmes d'exploitation classiques. J'ai demandé ce fil être déplacé.

Similar Messages

New HDD used Winclone to Migrate but can't boot into BOOTCAMP

Okay, so I'm familiar with some command line stuff and need some guidance here...
Bootcamp partition looks good but will not boot. I get "Error loading operating system" on trying to boot into bootcamp. I'm posting the output of a couple of things that I've seen asked for in the other threads...
ISD-Mac-Pro:~ mbrunner$ sudo gpt -r -vv show disk4
gpt show: disk4: mediasize=4000787030016; sectorsize=512; blocks=7814037168
gpt show: disk4: Suspicious MBR at sector 0
gpt show: disk4: Pri GPT at sector 1
gpt show: error: bogus map
gpt show: unable to open device 'disk4': No such file or directory
ISD-Mac-Pro:~ mbrunner$ sudo fdisk /dev/disk4
Disk: /dev/disk4    geometry: 219051/255/63 [3519069872 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 -   25 127 14 [         1 -     409639] <Unknown ID>
2: AF   25 127 15 - 1023 43 26 [    409640 - 587845200] HFS+
3: AB 1023 43 27 - 1023 49 49 [ 588254840 -    1269536] Darwin Boot
*4: 07 1023 59 36 - 855 132 45 [ 589524992 - 2929543168] HPFS/QNX/AUX
ISD-Mac-Pro:~ mbrunner$ sudo dd if=/dev/rdisk4s4 count=1 2>/dev/null | hexdump -C
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS    .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 70 23 23 |........?....p##|
00000020 00 00 00 00 80 00 80 00 f8 47 9d ae 00 00 00 00 |.........G......|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 08 37 34 70 b5 73 80 12 |.........74p.s..|
00000050 16 4b c2 89 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.K...3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200

Bulldog-XTRM wrote:
Recovery/transformation command (? for help): o
Disk size is 7814037168 sectors (3.6 TiB)
MBR disk identifier: 0x028A47A7
MBR partitions:
Number Boot Start Sector   End Sector   Status      Code
   1                     1       409639   primary     0xEE
   2                409640    588254839   primary     0xAF
   3             588254840    589524375   primary     0xAB
   4      *      589524992   3519068159   primary     0x07
Recovery/transformation command (? for help): p
Disk /dev/disk4: 7814037168 sectors, 3.6 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 7814037134
Partitions will be aligned on 8-sector boundaries
Total free space is 2301 sectors (1.1 MiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EFI System Partition
   2          409640      4883222135   2.3 TiB     AF00 Mac HD1
   3      4883222136      4884491671   619.9 MiB   AB00 Recovery HD
   4      4884492288      7814035455   1.4 TiB     0700 BOOTCAMP
If the Gdisk display is correct, a Hybrid MBR after 2.2TiB is not valid.
ISD-Mac-Pro:~ mbrunner$ sudo fdisk /dev/disk4
Disk: /dev/disk4    geometry: 219051/255/63 [3519069872 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 -   25 127 14 [         1 -     409639] <Unknown ID>
2: AF   25 127 15 - 1023 43 26 [    409640 - 587845200] HFS+
3: AB 1023 43 27 - 1023 49 49 [ 588254840 -    1269536] Darwin Boot
*4: 07 1023 59 36 - 855 132 45 [ 589524992 - 2929543168] HPFS/QNX/AUX
Entry 2 is 587845200 sectors (512 bytes each) ~ 280GiB. The GPT 2 entry is 2.3TiB. These do not match either,

My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
Quit and you should be able to install OS X now with your Apple ID and password.
see
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

Boot into bootcamp with external monitor

Has anyone been able to boot into bootcamp with an external monitor? I have a macbook pro (nvidia), and every time I start windows I have to open up the laptop and re-select my cinema display as the primary monitor. I know it doesn't sound that bad but I'd like to be able to boot into windows and not have to reselect the display each time.

I too am very interested in doing this. Perhaps there is a .bat file someone has written to do this somewhere?
Any ideas on how to do that?
Anyone? Anyone?

I installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?i installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?

i installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?

Hold Option key when starting - that gives you the option to choose between startup disks.

IMac 2.4GHz (MA877LL) refuses to boot with 4GB ram, boots only with 3 GB

iMac 2.4GHz Core 2 Duo 20" Anodized Aluminum (MA877LL)
iMac 2.4GHz (MA877LL) refuses to boot with 4GB ram, boots only with 3 GB
2 x2GB Geil GX2S6400-4GDCA
Computer refuses to boot with both chips installed 4 GB.
Computer will boot and recognize 3 GB..( Apple 1 GB + 2 GB GEIL)
Both Geil Chips will boot, when paired with the Apple 1 GB chip.
machine recognizes 3 GB ram.
Please advise...

Ensure the computer's RAM is fully seated down, and then try resetting the PRAM by holding down options-command-P-R at boot. The computer will make the boot chimes and then reset and chime again. When it chimes the second time release the keys and let the thing boot normally. Hopefully that will let it recognize the RAM.

Boots only in Safe Mode - Macbook mid 2007

My Macbook mid 2007 with Snow Leopard will not boot correctly. The only successful means is Safe Mode (key S during boot).
All measures published in various postings have been conducted without any peripheral devices. These are:
verify harddisc
verify RAM
resetting PRAM and NVRAM
A detailled overview can be found under here.
The existing original RAM and harddisc were successfully tested using a second identical Macbook. A new installation of Snow Leopard on the harddisc using the second Macbook was successful and started in this second Macbook as expected. This harddisc was then inserted into my Macbook, but it would not boot. Hence it is safe to exclude problems with RAM and the harddisc.
Attempts to boot with the Snow Leopard DVD (either via C plus boot or Option during boot and select Install DVD) are not successful. Attempts to boot from an external drive are also not successful. The boot process (regular, DVD, external) progresses to different states including grey screen with Apple and frozen wheel. There is no consistency.
From the various postings I have found and studied along with my numerous tests, I have deduced the following possibilities:
There is a problem with the GPU.
There is a problem with the keyboard (maybe someone spilled something).
I have found numerous solutions for "boots only in Safe Mode". All include booting via Install DVD, but this does not work in my case.
I have exhausted all my possibilities. Hopefully someone can provide more insight.

lruetimann wrote:
What I am not able to test is booting with an external CD/DVD drive. However, there is no indication that the built-in drive is malfunctioning.
If you have a second MacBook (#2 working OK), you could use its CD/DVD drive loaded with the 10.6 DVD as the target disk to boot into, as the first Macbook (#1 the troubled one) reportedly cannot see a 10.6 DVD normally.
How to use and troubleshoot FireWire target disk mode
In your case this would be:
With the MacBook(1) on (Host), the MacBook(2) off (Target) connect the firewire cable.
Start the MacBook(2), hold T key to make it the boot drive. It will appear on the MacBook's(1) Desktop.
Insert the 10.6 Install DVD into the MacBook(2).
It too will appear on the MacBook's(1) Desktop.
From the MacBook(1), select Restart and hold down the Option key to select Start-up Manager.
From Start-up Manager, select the 10.6 Install DVD which will take you into the installation.
If this occurs, then you have booted into the install 10.6 DVD, From there you could try and install it, see what happens.
However, if it does not see the DVD disk, then this would indicate a defect in the logicboard (motherboard), though which component I would not guess.
If it does see the DVD, in Macbook (2) and can boot into it,… I'd be surprised!

How to boot only one group in remote machine from master machine

Hi,
I want to know the command to boot entire remote machine from master machine and how to boot only one group for remote machine from master machine.
Thanks
Amit

You can boot the entire remote machine (after booting the Master machine) as follows:
tmboot -B <lmid of remote machine> -l <lmid of remote machine>.
For all the available tmboot options see http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rfcm/rfcmd.html#wp1032112
Regards,
Malcolm.

IMac 7,1 boot only in single user mode

Hi all
I've a colleague with the following problem... his iMac 20'' (iMac7,1) is able to boot ONLY in safe/single user mode (with shift key pressed during boot).
If he tries to boot normally, after the usual Apple logo screen he gets a blank (light grey) screen. No finder, no login screen.
We've tried this procedures:
- SMB reset
- PRAM cleared
- OS Reinstall (we've tried from Lion to Mavericks... actually there's 10.7.5 installed)... note that ALL installation procedure has completed successfully.
- tested the 1 RAM module installed (seems to be OK)
- tested the HD (no problems found)
Despite all these attempts, this iMac is booting well only if we press SHIFT during startup. All programs run well, wifi is working and online update too. If we reboot leaving it to restart normally (no key pressed) it shows Apple Logo for 1 minutes, then (after a black reset of the screen) seems to crash/stuck into an empty grey screen.
Is possible to identify which driver/kext is causing this problem? It can be an hardware problem? How we can fix it?
Thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.apple.SafariNotificationAgent com.apple.usbmuxd com.apple.xprotectupdater com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 1233118628 2636415542 842973933 4019080058 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

CSS 11500 booting only to Offline DM mode

Hello,
I setup a new CSS 11500 this morning, going through the steps of setting up the administrator password, IP address for the management console etc, but when continuing the CSS went straight to the offline DM menu. Now rebooting the unit it clears all the tests, loads the operational flash but continues to go straight to the DM menu regardless whether you press <y> or not at the prompt.
I also tried connecting via telnet to the management console but get connection refused.
Any ideas on why the CSS boots only to the DM menu?
Thanks in advance,
- Trevor

Trevor,
once if offdm, attached a laptop with FTP Server on it on the management port.
Then from offdm, you can configure the CSS to boot from FTP server.
Once the box is up and running again, make sure you have an image on disk.
Finally, you don't need a PCMCIA flash and no you should no have received one.
Regards,
Gilles.

Computer boots only to hp logo

Desktop HP Pavilion a1748X
Vista operating system
Computer boots only to HP Logo.
Emergency start disks does not work.
System will not boot from Vista recovery disks.

It's the most probable thing and if that amps are the true ones then you better get another PSU of one rail only they are the best.
See this Power Suppy Requirements & Selection.
Edit: Use this Probably the most correct PSU calculator you can use for MSI K8N Nvidia Neo's to find the best PSU for your needs.
Edit: BTW do not turn that PSU on again or you can destroy your computer...but that is only my opinion.
Be well....

Boot only with fan unlocked

hello, my pc have worked properly for 1 month. now, impossible to boot correctly.
The led's are all green directly.
After investigations, the pc boot only when the fan (original intel fan) is unlocked.
P4 2,8 c + 2X 256 pc3200 samsung, xp pro pack 1.
heeeeeeeeeelp me.
best regards.

Don't worry about it: I'm (sigh) American, but I lived in Paris for six months, so I’m less intolerant of the language barrier than some. Where in France are you from? (Just curious). I guess in your case it was diagnostic, but usually there’s no good reason to start a computer without the heatsink on the CPU. Try it with an alternate fan. Now that I think of it, I’m reasonably sure you can’t actually fry your processor by doing so (I’m fairly tired at this point—rampant insomnia—so forgive me), but the processor will throttle *way* back. If you can try to describe your problem in more detail, I or others here will be happy to do what we can. I’d offer to help translate, but at this point my French is likely so much worse than your English as to make that not even worth the while.

K8T Neo boot only without keyboard

Hi,
since yesterday I am owner of an MSI K8T Neo Mainboard, but unfortunately I can't enjoy it. The mainboard boots only sometimes an only if the keyboard is not connected.
My system:
Mainboard: MSI K8T Neo-FIS2R (MS 6702 Ver. 1.0)
Prozessor: AMD Athlon 64 3000+
Cooler: Artic Cooling Silencer 64
RAM: Infineon 2100er DDR RAM (HYS64D32000GU-7-A, A3E115011, PC2100U-20330-B1. CL2)
Graphic card: ATI Radeon 8500 64 MB
Power Supply: Enermax EG465AX-VE(G) FMA 460 W (+3.3V: 35A, +5V: 35A, +12V: 33A)
While I'm trying to find the problem I 've already try to:
- running the mainboard outside of te case to avoid shortcircuits
- reseting CMOS
At the moment the mainboard is lying on a piece of newspaper, only the processor, the cooler, the power supply (both power connectors, even the 4-pin 12V connector), the graphic card, the power switch and the diagnose LEDs (D-Bracket 2) are connected.
If I power on the system, I get to the boot screen, where the system want's me to hit F1 or F2 to configure the reseted CMOS, but thats difficult without a keyboard...
If I connect the keyboard (PS/2), the first boot screen stays on the display (the CoreCell Ship logo, no texts) and the d-bracket shows "attempt to boot". I tried 3 different PS/2 Keyboards (one Cherry Keyboard and two NoName products), but it's every time the same effect.
I already tried to fit only one of the Infineon RAMs into the motherboard, but nothings changes.
Is there someone who can help me? What else could I try?
Greetings
Henning

The board is outside the case. No possibility for a short circuit.
I try to connect a mouse/keyboard kombination:
ps/2 keyboard connected: no boot
ps/2 keyboard/ usb mouse: no boot
ps/2 keyboard/ ps/2 mouse: no boot
only usb mouse: no boot
only ps/2 mouse: no boot
nothing connected: boot
b.t.w. the d-bracket shows "attempting to boot" after it shows "bios sign on (this will start showing information about logo, prozessor,...)"
Greetings
Henning

No Display on TV - Booting Thru BootCamp

I definitely don't consider myself an idiot when it comes to computers, but what seems to be something SO simple just isn't working.
I tried to connect my mac mini to my TV via DVI to S-Video converter. Nothing is showing up on the screen. I've searched a lot of online articles on how to do this and it seems like I should just be able to plug it in and -- voila -- have picture and just adjust the display. But I'm not getting anything.
My TV has 2 input sections (Video 1 and Video 2). My DVD player is plugged into #1 and Xbox is plugged into #2. Since #1 is the only one with S-Video, I disconnected my DVD player and plugged the Mini into #1. No picture. Just a blank blue screen (which it shows if the input device is turned off)
So I plugged the DVD player back in and tried plugging the Mini into the DVD player. The DVD player has 2 inputs (L1 and L2). I've used L2 to play my no-console-necessary Wheel of Fortune game before and it works fine. So I plugged the S-Video in there. Instead of getting the blue screen, I get a black screen (which it usually does if the device is turned on, but no DVD is inserted). I changed the channel on the DVD player between L1 and L2 and swapped the S-video between the two inputs with no results.
I booted up the mini using a monitor and changed the display to 640x480 on the Mac side and 800x600 on the Windows side (which is the smallest for each) and I'm still getting nothing.
Is there something I'm missing? Another setting maybe? Does it have anything to do with the fact that I'm starting up using BootCamp? If so, what can I hit on the keyboard to get it to boot directly to OS X?
TIA!
~Coral

I had a similar problem-
Then I remembered something I read in the tv's manual-
It said to have everything hooked up and then plug in the tv.
IT WORKED.
Maybe it's not hot swappable like usb.
HTH

Has anyone had this happen - Boots only as a PC

Right now I have a 200 GB windows 7 PC running on an Imac body. The drive should be 1 TB but I gave the bulk to my mac side because I need it for photoshop and my main applications. The system fails to recognize the mac partition completely when booting up. I get the prohibitory symbol about 3 or 4 min into booting up. It lingers on that screen for about an additional minute, then starts up windows 7. Windows 7 boots up normally and the system runs okay after that. Windows 7 scan disk can't find any problems. I downloaded HD Tune Pro trial version. It reveals there are a few bad sectors, and further unstable ones. The main issue it has is the heat of the drive. It runs at about 130 (F) consistently. If the Imac is idle it settles a little cooler but not by much.
Any attempts to try to reset anything or insert the apple boot CD has failed. The machine continues to skip over the Mac side and load windows 7. I'm certain this is a hard drive failure of some sort, though the inquisitive part of me wants to know exactly what kind of failure can cause one partition to completely fail and the other to continue running okay (for now).
Some other odd things that happened since the failure:
- I can now almost fully access the mac partition via windows. I can't open system files or programs, but I can load jpgs and copy over stuff from that drive. I've now fully backed up both partitions on an external drive. I mean as much as I can. I don't think anything can be done for saving applications and settings related to them. I have grabbed what looks like the bookmarks for my web browsers and my personal stuff.
- I wasn't previously able to do so. When the Mac partition was functioning, I wasn't able to open the drive at all via windows. It would open up essentially what looked like a blank disk, ask me to format, or give some kind of message if I tried to open the file. I could however, open the windows partition via the mac side and copy stuff over.
Why this change, puzzles me. I'm thankful whatever happened, that I am able to access and back-up my data.
I'm not worried about further drive loss. As soon as I can get the money together (about $260-$300), I'm sending this over to the apple store and getting the drive replaced.
Some snapshots of tests. These are only from the windows partition I think. I can't get anything at all from the mac side, likely because of program limitations.
Back story before this happened:
I'm certain something is failing either the hard drive or something else with my mac. I've had problems with it booting shortly after I got it a few years ago. I think I got it around 2010, though have no way to look up exact date at the moment. I worked around the issue by leaving the machine running and only doing hard shutdowns when absolutely unavoidable. To power down, I'd sent the machine to sleep.
Upon starting up I'd either see it hang at the loading screen w/ or without progress bar or just a black screen, monitor completely off but the fans and the hard drive seeming to run, or it would start up okay. It would often take several attempts to get the mac to boot successfully.
Eventually it got to the point it failed to start up at all. I resorted to using the mac CD. It tried and failed to repair the drive. I was forced to either install the OS on my external back-up drive or erase the drive and start over. Since I had almost all of my personal stuff (minus web bookmarks) backed up, I opted for the erase and start over. I had much less booting problems overall and things seemed overall fine until now. The mac ran slow and felt hot, but not much out of the ordinary. I did keep my external drive set up to time machine and have it back up on a daily schedule.
Just wondering if anyone else had heard or seen a similar story to mine, or is this a rather unique way for a drive to fail? Or is there something else I need to have looked at as well as the hard drive? I just don't want to pay so much for a new hard drive and have it fail too if there is some other problem.

Seems my situation is unique? No one can help me?
Anyways an update: I held the Opt, then after it showed bootcamp, I was able to hold down on a set of keys (can't remember what I used) but I got the recovery disk to load. It would not do anything at all with my mac os hard drive. It wouldn't even let me erase or reformat the drive.
My option left was to find an external drive to install the OS snow leopard disk. I ran into an additional problem that the install disk was scratched. I had to clean it and buff off some of the scratches with toothpaste. That seemed to clean it just enough for the disk to finish a successful installation on the external drive.
From there I was able to format the Mac OS partition. Now ever since, different error checking software tells me the hard drive is fine? Should I trust it anymore? This is really odd. How can pending sectors suddenly be fixed by this problem? Also it shows I have no more bad sectors in the drive.
I still feel skeptical. As far as my files go, looks like time machine can successfully restore my system up to Sept 28 or 29 this year. Everything after that has been backed up under my PC formatted external drive.

Grub2 booting only bootcamp

Similar Messages

Maybe you are looking for