Grüße Fräulein, Sturm-Verbot-Führer, Hello, we are with some questions

Grüße Fräulein, Sturm-Verbot-Führer, Hello, we are with some questions about the thought of GBP 77.336, apparently some of our local chapters of chicken producers in Mexico, should be changed, put a small bed of sand and tents in the city. One of the Mexicans, all connections Poncho sniffing glue every time you see him with a hatchet to cut the data cable with an ax. We called immigration and the nature of the problem and Poncho and his producer was a kind of rebellion, threw the chicken **bleep** on the government and is working like crazy NAP. Bryan and our engineers, it seems that the costs of these persons from Mexico, is excited because he said he misses his family in the Middle East, Verizon, I called our 1-800 number and were glad we had rotary phones , but said that someone would go to see these issues with Peter Nam and poncho, if you write an element upstream of the cut of radiation accelerate our DSLAM. Now, with all kinds of components, is accelerating as bowling, and then started kind of breakdown of carbon molecules locally is not always the Internet is like living in Mount St. Helens.

I'm afraid I don't understand the question.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Similar Messages

Previous Time Capsule Limits

I have the previous version of the Time Capsule (1TB) and I have it connected to 3 apple TVs and 4 Airport Express for coverage extension. Because we have a large family, there are 6-7 personal devices (iPad, iPod, etc.) connected.
One of the aTVs can't connect to the internet unless I reboot the TC. Is there a limit to the number of devices the previous model can cope with.
Alternatively, is there a diagnostic I can run on the TC to check it is all working OK?
Thanks,

Ok.. first thing is to definitely take the TC back to 7.6.1 or even 7.5.2 firmware. The new firmware definitely struggles with this setup.. you can see the horror stories in the posts around here. It gives range and throughput issues.. although since it only just came out, I am guessing the issue existed prior to that.. or is this new problem??
When you have a reasonably large network, do as much as you can over ethernet.
For example, if you have ethernet running to the AE near the ATV, are you using ethernet on the ATV?
You are going to hate me.. (that is ok.. lots do!!)
But to fix this up you are going to need to start over. And you are going to need to take full control of the wireless network. That means all the auto settings in the TC and the express used as AP have to be manually set by you.
You are "der führer" of the network. (toothbrush moustache optional).
You also need to use a better utility than v6.. if you really want to see what is going on.. (v6 is a toy.. it has no ability to access the logging on any apple router.. why apple why??) Do you have a computer running Lion or earlier OS? If so just use 5.6 utility.
What cable modem do you have? Is the wireless still active on that? If so you have far too much wireless going on. Kill the wireless in the cable router.
Take the TC and all the express units back to 7.6.1 firmware (the TC itself maybe back to 7.5.2 as you can upgrade again later if necessary). You will need to do it one by one with the device plugged into the computer I think.. that is the only reliable and safe way at least.
What version express are they?? The new type A1392 or the older A1264?
Once you have done that.. set up the TC.
Use all SMB names.. that is, short, no spaces pure alphanumeric.
eg TC name. .TCGen3
Wireless name TC24ghz for 2.4ghz.. and use TC5ghz for 5ghz wireless.. set name under wireless network options.
Use WPA2 Personal security only.. a passkey of 12 or so characters is generally plenty. pure alphanumeric mix of upper and lower case plus numbers.
Finally radio channels.. Please set these yourself. There are only 3 non-overlapping channels at 2.4ghz, 1, 6, 11 (13 in Aus). We will set each AP to one of these channels.. but 5ghz will also have to be set.. use the lower range, 36, 38, 40.. any of them is probably ok.. range is not that good anyway.
Once you have that setup and marked to allow the network to be extended, you can then setup the express to connect either by wireless to extend wireless.. remember this has a big impact on speed and should be avoided as far as possible.
With those ones that are working as AP plugged in by ethernet. Use identical name.. identical security and password.. but different channel. So use say 6 for the TC, channel 1 for AE1 and channel 11 or 13 for AE2.. the extend will be also on 6 so that won't matter.. if the AE are new dual band type.. also set the 5ghz name and security to match the TC but with different channels.
Do you hate me yet??
You can email me direct and I will try and help you if you have some questions.
<Email Edited by Host>

German umlauts into question marks

Hi,
The problem is that the German umlauts are converted to question marks . I create a mail message (see below). After the ship in here: Outlook 2010 can be seen, the German umlauts as question marks.
Gesch?ftsf?hrer: ....
RG M?nchen ....
mailmessage obj_message
s_mapi_connector = 'SMTP:'
obj_message.notetext = struct_drucker.s_email_message
obj_message.recipient[l].address = s_mapi_connector + s_email_adress
obj_message.recipient[l].recipienttype = mailto!
obj_message.recipient[l].name = s_email_recipient
// Email per MAPI-Client
obj_session = CREATE mailSession
en_result = obj_session.mailLogon(mailNewSession!)
en_result = obj_session.mailsend(obj_message)
en_result = obj_session.mailLogoff()
DESTROY obj_session
Does anyone know a solution?
Thank You
André Rust

Hi André,
Here is my code (also tested successfully with PB12.5.2 build 5703):
mailSession l_mailSession
mailMessage l_mailMessage
l_mailMessage.Recipient [1].Name = "[email protected]"
l_mailMessage.Recipient [1].RecipientType = mailTo!
l_mailMessage.receiptrequested=TRUE
l_mailMessage.subject = "PB E-mail example from PB 12.6 Einflußgröße Gefäßschädigung"
l_mailMessage.noteText = "Bla,~nbla, bla, ...~n"
l_mailMessage.noteText += "~n"
l_mailMessage.noteText += "Meßgröße"
l_mailMessage.noteText += "~n"
l_mailMessage.noteText += "Rückäußerung"
l_mailMessage.noteText += "~n"
l_mailMessage.noteText += "Rückstöße"
l_mailMessage.noteText += "~n"
l_mailMessage.noteText += "flächenmäßig"
l_mailMessage.noteText += "~n"
l_mailMessage.noteText += "rüstungsmäßig"
l_mailMessage.noteText += "~n"
l_mailMessage.noteText += "überläßt"
l_mailMessage.noteText += "~n"
l_mailMessage.noteText += "äußerst"
l_mailSession = CREATE mailSession
if l_mailSession.mailLogon () <> mailReturnSuccess! then
MessageBox ("E-mail error!", "Login failed!", Exclamation!)
else
if l_mailSession.mailSend (l_mailMessage) <> mailReturnSuccess! then
MessageBox ("E-mail error!", "Sending failed!", Exclamation!)
else
MessageBox ("E-mail report!", "Message sent!", Information!)
end if
end if
l_mailSession.mailLogoff ()
DESTROY l_mailSession

Open Letter to Apple and the Pages DEV Team

Dear Apple -
I am a web developer and a beginning fiction author... I love my macbook... I am planning to get a ipad with the Pages App soon (upgrading to a Macbook Pro first). I am also an owner of the iphone 4, and therefore have explored ibooks. Here is a hint from someone who while I am a beginning author, I have done ebooks for technical writing and user guides with my paying clients.
Do you want to kill the kindle and the Amazon eformat?
There is one thing you at Apple can do that will hasten the death of AZW. Add a export to epub format option in Pages. I have bought iworks every time a new version has been released. This is something I can not say about any other product, including OSes. For someone who has been in IT for over ten years, such product loyalty is rare. Please make it easier for me to use epub then it is to use Amazon.
Thank you
Tom S.

Martin Luther had an easier job of getting noticed.
If memory serves, the worthy doctor was protected at the Diet of Worms by Friedrich der Weise, Frederick the Wise, the Elector of Saxony. There is an excellent engraving of Friedrich by Albrecht Dührer.
The problem in the present situation is that the institution that has been selling letters of absolution has been doing so on paper that allows the letters to fall off the page, so to speak. And it has some problems admitting to this.
/hh

Hard drive failed - how do i retrieve music from iPod itself?

Hi, my computer's hard drive was wrecked from a power surge so my iTunes has gone. Can I retrieve the music from my iPod before I reinstall iTunes on my new computer and reset my iPod?
Dell 3100 Windows XP

Try one of these iPod to PC utilities.
YamiPod: http://www.yamipod.com/main/modules/home/
SharePod: http://www.sturm.net.nz/website.php?Section=iPod+Programs&Page=SharePod
iPod Agent: http://www.ipodsoft.com/index.php?/software/ipodagent

Outlook 2013 XLS Attachments cannot be opened in Excel 2013 due to Trusted Center restrictions with Outlook Secure Temp Folder

Dear all,
I'm having some serious issues with Office 2013's Trusted Center settings. In Outlook 2013 XLS Attachments cannot be directly opened in Excel 2013 with double-clicking due to Trusted Center restrictions for Excel 2013 regarding Outlook's Secure Temp Folder.
I tried to adjust the corresponding Office 2013 Administrative Template within my GPOs but to no prevail.
I did find out that Outlook 2013 places an attachment within the Outlook Secure Temp Folder located at "C:\Users\a.ollischer\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook\PPIU10RW” before passing it to Excel 2013 in order to
open it. It fails due to not trusting this location though I added the corresponding path to my Trusted Locations.
What can I do in order to make this work without having to tediously save each and every attachment to "My Documents" prior to opening it? Any help would be greatly appreciated.
Alex
Alexander Ollischer Diplom-Wirtschaftsinformatiker (FH) Citrix & Microsoft Certified Engineer (CCEA, CCEE, MCSA, MCSE, MCDBA, MCTS) Afontis IT+Services GmbH Baierbrunner Straße 15 81379 München Deutschland Telefon (089) 74 34 55-0 Fax (089) 74 34 55-55
mailto:[email protected] http://www.afontis.de http://www.itganzeinfach.de Amtsgericht München, HRB 109 005 Geschäftsführer: Thomas Klimmer

Hi Maurice 7785,
Deal and customize attachment security behavior to access such kind of blocked file format. Usually, Outlook does not allow users to open such unsafe type of attachments. It means they are blocked them by default, so you need to unblock such items using REG
values.
Take more help from the similar thread:
http://social.technet.microsoft.com/Forums/en-US/53563c4b-d27f-4866-a5a8-95eb1ad1a3e6/hide-attachements?forum=outlook
Note: Improve community discussions by marking the answers helpful otherwise respond back for further help.
Thanks
Clark Kent

Access to DFS root via VPN not working - error 0x80070035 keeps popping up

Dear all,
when trying to access the DFS root via VPN from a Windows 7 non-domain member computer I always receive an error stating "Windows cannot access \\eggs.local\dfs", Error Code: 0x80070035, The Network Path was not found.
I searched the internet as well as these forums in order to get to grips with this error message but didn't find anything to solve my problem.
I made sure, that NetBIOS over TCP/IP is enabled, that I have access to the VPN adapter's DNS as well as WINS servers, that DNS name resolution is working properly, DNS split tunneling is enabled, Windows Firewall is disabled, and so forth. Still no luck.
Any ideas?
Thanks Alex
Alexander Ollischer Diplom-Wirtschaftsinformatiker (FH) Citrix & Microsoft Certified Engineer (CCEA, CCEE, MCSA, MCSE, MCDBA, MCTS) Afontis IT+Services GmbH Baierbrunner Straße 15 81379 München Deutschland Telefon (089) 74 34 55-0 Fax (089) 74 34 55-55
mailto:[email protected] http://www.afontis.de http://www.itganzeinfach.de Amtsgericht München, HRB 109 005 Geschäftsführer: Thomas Klimmer

Hi,
Though you mentioned DNS is working properly, please check if DNS forwarder is set as set correctly.
And incase it is caused by authentication, please try to force Kerberos to use TCP - by default it using UDP and on a slow VPN connection, UDP packets may be dropped.
How to force Kerberos to use TCP instead of UDP in Windows
http://support.microsoft.com/kb/244474
Also check NTFS and Sharing permission on top of the DFS Namespace. At least give users a Read permission.
If you have any feedback on our support, please send to [email protected]

Payment Terms (60 days net from invoice date, payment 10 th or 20 th of th)

Hi
I need to work on the below req.
60 days net from invoice date, payment 10th or 20th of the month.
Regards
Prasad

HI ,
Check OBB8,
Hrere you can give Fixed Date 10 & select additional months 2.
Try this .
chandra

ValidationTextField in IE6 IE7 problem, 1st keystroke ignored

hi,
i have a very interesting problem with "ValidationTextField"
in IE6 and IE7.
the validation on textfiels starts at 2nd keystroke, the
first keystroke in the field is ignored,
if iset the values by javascript like
$('theMovieTitle1').value = $('theNewText1').innerHTML;
$('theMovieTitle2').value = 'Hallo ';
$('theMovieTitle3').value = 'Hallo ÖÄÜ';
$('movieDescription').value = 'Austria Österreich
Fräulein ';
hmm??
you can see/test it here:
http://www.startup-service.com/Spry/demos/formsvalidation/testvalidate.html
thanks
herbert

I don't see that behaviour on your example in IE7 or Firefox.
If i highlight the text in the field and then begin typing the
validation occurs immediately
Can you explain how you are seeing it so i can try to
recreate?

Array keeps printing out null

I have an array that continues to print out null but when I trace it exactly after I store it, it stores what I want it to store. "White Bread"
Here is where the errors at:
int orderNum = 0;
 while(orderNum < cartItems)
 printItems = "<html>" + printItems + " 1" + itemNameStrings[orderNum] + "</html>";
 System.out.println(printItems);//Trace
 System.out.println(cartItems);//Trace
 System.out.println(orderNum);//Trace
 System.out.println(itemNameStrings[orderNum]);//Trace
 orderNum++;
 }And here is the whole project:
import java.io.*;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.border.*;
import java.text.*;
public class AdrianP1 implements ActionListener
 //---------------GLOBAL DECLARING------------------
 DecimalFormat Currency = new DecimalFormat("#0.00 dollars");//Currency
 //Changing Variables (void)
 String printItems = "Items";
 int arraySize = 2;
 String[] itemNameStrings;
 boolean first = true;
 boolean order = false;
 String itemName = "Error";
 double itemCost = 0.00;
 int cartItems = 0;
 //Main Frames
 final JFrame frame = new JFrame("Subway Sandwich Store");
 JFrame mainFrame = new JFrame("Subway Sandwich Store | Welcome");
 JFrame menuFrame = new JFrame("Subway Sandwich Store | Main Menu");
 JFrame instrucFrame = new JFrame("Subway Sandwich Store | Instructions");
 JFrame playFrame = new JFrame("Subway Sandwich Store | Play Game");
 JFrame breadFrame = new JFrame("Subway Sandwich Store | Order Bread");
 JFrame toppingFrame = new JFrame("Subway Sandwich Store | Order Toppings");
 JFrame condimentFrame = new JFrame("Subway Sandwich Store | Order Condiments");
 JFrame confirmFrame = new JFrame("Subway Sandwich Store | Confirm Your Order");
 JFrame cartFrame = new JFrame("Subway Sandwich Store | Your Cart");
 //---Main Buttons---
 final JButton mainMenuButton = new JButton("Main Menu");
 final JButton mainMenuButton1 = new JButton("Main Menu");
 final JButton mainMenuButton2 = new JButton("Main Menu");
 final JButton mainMenuButton3 = new JButton("Main Menu");
 final JButton goBackButton = new JButton("Go back");
 final JButton goBackButton1 = new JButton("Go back");
 final JButton goBackButton2 = new JButton("Go back");
 final JButton goBackButton3 = new JButton("Go back");
 final JButton goBackButton4 = new JButton("Go back");
 final JButton playButton1 = new JButton("Order Now!");
 final JButton playButton2 = new JButton("Order Now!");
 final JButton instrucButton = new JButton("Instructions");
 final JButton exitButton = new JButton("Exit");
 //---Play Buttons---
 final JButton checkButton = new JButton("Check Out");
 final JButton checkButton1 = new JButton("Check Out");
 final JButton cartButton = new JButton("Cart (" + cartItems + ")");
 final JButton breadButton = new JButton("Bread");
 final JButton toppingsButton = new JButton("Toppings");
 final JButton condimentsButton = new JButton("Condiments");
 //-------Bread------
 double bwCost = 0.50, bwlCost = 0.50, biCost = 0.75, bhCost = 0.50;
 boolean whiteB = false, wholeB = false, italB = false, harvestB = false;
 final JButton whiteBreadButton = new JButton("Order White");
 final JButton wholeBreadButton = new JButton("Order Wheat");
 final JButton italianBreadButton = new JButton("Order Italian");
 final JButton harvestBreadButton = new JButton("Oder Harvest");
 //-----Toppings-----
 JButton orderTopButton = new JButton("Order the Selected Topping");
 JLabel pictureTop;
 JComboBox toppingList;
 //----Condiments----
 final JButton ketchupButton = new JButton("Order Ketchup");
 final JButton mustardButton = new JButton("Order Mustard");
 final JButton relishButton = new JButton("Order Relish");
 //-----Confirm------
 final JLabel confirmTextLabel;
 final JButton acceptButton = new JButton("Accept");
 final JButton declineButton = new JButton("Decline");
 //----Cart Screen---
 final JLabel cartItemLabel = new JLabel("<html>Items No Items.</html>", JLabel.LEFT);
 final JLabel cartPriceLabel = new JLabel("<html>Price No Items.</html>");
 //-------------END GLOBAL DECLARING-----------------
 //ActionPerformed Method
 public void actionPerformed(ActionEvent event)
 if(event.getSource()==mainMenuButton || event.getSource()==mainMenuButton1 || event.getSource()==mainMenuButton2 || event.getSource()==mainMenuButton3)
 playFrame.setVisible(false);
 mainFrame.setVisible(false);
 instrucFrame.setVisible(false);
 menuFrame.setVisible(true);
 if(event.getSource()==goBackButton || event.getSource()==goBackButton1 || event.getSource()==goBackButton2 || event.getSource()==goBackButton3 || event.getSource()==goBackButton4)
 cartFrame.setVisible(false);
 confirmFrame.setVisible(false);
 condimentFrame.setVisible(false);
 toppingFrame.setVisible(false);
 breadFrame.setVisible(false);
 instrucFrame.setVisible(false);
 playFrame.setVisible(true);
 if(event.getSource()==instrucButton)
 menuFrame.setVisible(false);
 instrucFrame.setVisible(true);
 if(event.getSource()==playButton1 || event.getSource()==playButton2)
 instrucFrame.setVisible(false);
 menuFrame.setVisible(false);
 playFrame.setVisible(true);
 if(event.getSource()==breadButton)
 playFrame.setVisible(false);
 menuFrame.setVisible(false);
 breadFrame.setVisible(true);
 if(event.getSource()==toppingsButton)
 playFrame.setVisible(false);
 toppingFrame.setVisible(true);
 if(event.getSource()==condimentsButton)
 playFrame.setVisible(false);
 condimentFrame.setVisible(true);
 if(event.getSource()==acceptButton)
 ++arraySize;
 itemNameStrings = new String[arraySize];
 itemNameStrings[cartItems] = itemName;
 System.out.println(itemNameStrings[cartItems]);
 cartItems++;
 cartButton.setText("Cart (" + cartItems + ")");
 confirmFrame.setVisible(false);
 playFrame.setVisible(true);
 if(event.getSource()==declineButton)
 confirmFrame.setVisible(false);
 playFrame.setVisible(true);
 if(event.getSource()==cartButton)
 int orderNum = 0;
 while(orderNum < cartItems)
 printItems = "<html>" + printItems + " 1" + itemNameStrings[orderNum] + "</html>";
 System.out.println(printItems);//Trace
 System.out.println(cartItems);//Trace
 System.out.println(orderNum);//Trace
 System.out.println(itemNameStrings[orderNum]);//Trace
 orderNum++;
 cartItemLabel.setText(printItems);
 System.out.println(printItems);
 playFrame.setVisible(false);
 cartFrame.setVisible(true);
 if(order==true)
 if(event.getSource()==whiteBreadButton)
 whiteB = true;
 itemName = "White Bread";
 itemCost = bwCost;
 confirmTextLabel.setText("<html>Would you like to purchase " + itemName + " for a cost of $" + Currency.format(itemCost) + "?</html>");
 breadFrame.setVisible(false);
 confirmFrame.setVisible(true);
 if(event.getSource()==wholeBreadButton)
 wholeB = true;
 confirmFrame.setVisible(true);
 if(event.getSource()==italianBreadButton)
 italB = true;
 confirmFrame.setVisible(true);
 if(event.getSource()==harvestBreadButton)
 harvestB = true;
 confirmFrame.setVisible(true);
 if(event.getSource()==exitButton)
 System.exit(0);
 if(event.getSource()==toppingList)
 JComboBox cb = (JComboBox)event.getSource();
 String toppingName = (String)cb.getSelectedItem();
 updateLabel(toppingName);
 //Main Method
 public static void main(String[] args) throws Exception
 new AdrianP1();
 //Constructive and Starting Method
 AdrianP1()
 //--------------------------Action Listeners----------------------------------
 //Creates all action listeners
 mainMenuButton.addActionListener(this);
 mainMenuButton1.addActionListener(this);
 mainMenuButton2.addActionListener(this);
 mainMenuButton3.addActionListener(this);
 goBackButton.addActionListener(this);
 goBackButton1.addActionListener(this);
 goBackButton2.addActionListener(this);
 goBackButton3.addActionListener(this);
 goBackButton4.addActionListener(this);
 exitButton.addActionListener(this);
 instrucButton.addActionListener(this);
 playButton1.addActionListener(this);
 playButton2.addActionListener(this);
 breadButton.addActionListener(this);
 toppingsButton.addActionListener(this);
 condimentsButton.addActionListener(this);
 //Bread buttons
 whiteBreadButton.addActionListener(this);
 //Final buttons
 cartButton.addActionListener(this);
 acceptButton.addActionListener(this);
 declineButton.addActionListener(this);
 //--------------------------Splash Screen----------------------------------
 //Declaring
 order = false;
 final ImageIcon welcomePic = new ImageIcon("welcome.jpg");
 final JPanel sMainPanel = new JPanel(new BorderLayout());
 final JPanel sTopPanel = new JPanel(new BorderLayout());
 final JPanel sButtonPanel = new JPanel(new FlowLayout ());
 final JLabel sTextLabel = new JLabel("Please click the button below", JLabel.CENTER);
 final JLabel label = new JLabel("Subway Sandwich Store");
 final JLabel welcomeLPic = new JLabel(welcomePic);
 sTopPanel.add(welcomeLPic , BorderLayout.NORTH);
 sTopPanel.add(sTextLabel);
 sButtonPanel.add(mainMenuButton1);
 sMainPanel.add(sTopPanel , BorderLayout.CENTER);
 sMainPanel.add(sButtonPanel , BorderLayout.SOUTH);
 mainFrame.setContentPane(sMainPanel);
 mainFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 mainFrame.pack();
 mainFrame.setVisible(true);
 mainFrame.setSize(350,390);
 //--------------------------Main Menu----------------------------------
 //Declaring
 order = false;
 final ImageIcon mainMenuImage = new ImageIcon("mainMenuImage.jpg");
 final JPanel mMainPanel = new JPanel(new BorderLayout());
 final JPanel mTopPanel = new JPanel(new BorderLayout());
 final JPanel mButtonPanel = new JPanel(new FlowLayout());
 final JLabel imageLabel = new JLabel(mainMenuImage);
 final JLabel textLabel = new JLabel("Please click a button", JLabel.CENTER);
 mTopPanel.add(imageLabel , BorderLayout.NORTH);
 mTopPanel.add(textLabel , BorderLayout.CENTER);
 mButtonPanel.add(playButton1);
 mButtonPanel.add(instrucButton);
 mButtonPanel.add(exitButton);
 mMainPanel.add(mTopPanel, BorderLayout.CENTER);
 mMainPanel.add(mButtonPanel, BorderLayout.SOUTH);
 menuFrame.setContentPane(mMainPanel);
 menuFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 menuFrame.pack();
 menuFrame.setVisible(false);
 menuFrame.setSize(350,390);
 //--------------------------Instructions----------------------------------
 //Declaring
 order = false;
 final JPanel iTopPanel = new JPanel(new BorderLayout());
 final JPanel iButtonPanel = new JPanel(new FlowLayout());
 final JPanel iMainPanel = new JPanel(new BorderLayout());
 final JLabel iTextLabel = new JLabel("Instructions go HRER!", JLabel.CENTER);
 iTopPanel.add(iTextLabel);
 iButtonPanel.add(mainMenuButton3);
 iButtonPanel.add(playButton2);
 iMainPanel.add(iTopPanel, BorderLayout.CENTER);
 iMainPanel.add(iButtonPanel, BorderLayout.SOUTH);
 iTopPanel.setBorder(BorderFactory.createTitledBorder("Instructions"));
 instrucFrame.setContentPane(iMainPanel);
 instrucFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 instrucFrame.pack();
 instrucFrame.setVisible(false);
 instrucFrame.setSize(350,390);
 //--------------------------Play Game----------------------------------
 //Declaring
 order = false;
 final ImageIcon playImage = new ImageIcon("playGameImage.jpg");
 final JPanel pTopPanel = new JPanel(new BorderLayout());
 final JPanel pInstrucPanel = new JPanel(new FlowLayout());
 final JPanel pButtonPanel = new JPanel(new FlowLayout());
 final JPanel pButton1Panel = new JPanel(new FlowLayout());
 final JPanel pButton2Panel = new JPanel(new FlowLayout());
 final JPanel pMainPanel = new JPanel(new BorderLayout());
 final JLabel pImageLabel = new JLabel(playImage);
 final JLabel pTextLabel = new JLabel("Click below to customize your sandwich; or check out", JLabel.CENTER);
 pTopPanel.add(pButton2Panel, BorderLayout.NORTH);
 pTopPanel.add(pImageLabel, BorderLayout.CENTER);
 pInstrucPanel.add(pTextLabel, BorderLayout.SOUTH);
 pButton1Panel.add(breadButton);
 pButton1Panel.add(toppingsButton);
 pButton1Panel.add(condimentsButton);
 pButton2Panel.add(checkButton);
 pButton2Panel.add(cartButton);
 pButton2Panel.add(mainMenuButton2);
 pButtonPanel.add(pButton1Panel);
 pMainPanel.add(pTopPanel, BorderLayout.NORTH);
 pMainPanel.add(pInstrucPanel, BorderLayout.CENTER);
 pMainPanel.add(pButtonPanel, BorderLayout.SOUTH);
 pInstrucPanel.setBorder(BorderFactory.createTitledBorder("Instructions"));
 playFrame.setContentPane(pMainPanel);
 playFrame.setDefaultCloseOperation(playFrame.EXIT_ON_CLOSE);
 playFrame.pack();
 playFrame.setVisible(false);
 playFrame.setSize(350,390);
 //--------------------------Order Bread----------------------------------
 //Declaring
 order = true;
 final ImageIcon whiteBImage = new ImageIcon("whiteB.jpg");
 final ImageIcon wheatBImage = new ImageIcon("wheatB.jpg");
 final ImageIcon italianBImage = new ImageIcon("italianB.jpg");
 final ImageIcon harvestBImage = new ImageIcon("harvestB.jpg");
 final JPanel bTopPanel = new JPanel(new GridLayout(0,2));
 final JPanel bCenterPanel = new JPanel(new FlowLayout());
 final JPanel bButtonPanel = new JPanel(new FlowLayout());
 final JPanel bMainPanel = new JPanel(new BorderLayout());
 final JLabel whiteBLabel = new JLabel(whiteBImage);
 final JLabel wheatBLabel = new JLabel(wheatBImage);
 final JLabel italianBLabel = new JLabel(italianBImage);
 final JLabel harvestBLabel = new JLabel(harvestBImage);
 final JLabel bInstrucTextLabel = new JLabel("Please click the button below a bread to choose", JLabel.CENTER);
 bTopPanel.add(whiteBLabel);
 bTopPanel.add(wheatBLabel);
 bTopPanel.add(whiteBreadButton);
 bTopPanel.add(wholeBreadButton);
 bTopPanel.add(italianBLabel);
 bTopPanel.add(harvestBLabel);
 bTopPanel.add(italianBreadButton);
 bTopPanel.add(harvestBreadButton);
 bCenterPanel.add(bInstrucTextLabel);
 bButtonPanel.add(goBackButton1);
 bMainPanel.add(bTopPanel, BorderLayout.NORTH);
 bMainPanel.add(bCenterPanel, BorderLayout.CENTER);
 bMainPanel.add(bButtonPanel, BorderLayout.SOUTH);
 bTopPanel.setPreferredSize(new Dimension(200, 270));
 bTopPanel.setMinimumSize(new Dimension(200,270));
 bTopPanel.setMaximumSize(new Dimension(200,270));
 bCenterPanel.setBorder(BorderFactory.createTitledBorder("Instructions"));
 breadFrame.setContentPane(bMainPanel);
 breadFrame.setDefaultCloseOperation(breadFrame.EXIT_ON_CLOSE);
 breadFrame.pack();
 breadFrame.setVisible(false);
 breadFrame.setSize(350,390);
 //--------------------------Order Toppings----------------------------------
 //Declaring
 order = true;
 final JPanel tTopPanel = new JPanel(new FlowLayout());
 final JPanel tCenterPanel = new JPanel(new FlowLayout());
 final JPanel tActionPanel = new JPanel(new BorderLayout());
 final JPanel tButtonPanel = new JPanel(new FlowLayout());
 final JPanel tMainPanel = new JPanel(new BorderLayout());
 final JLabel tInstrucTextLabel = new JLabel("<html>Please select a topping from the drop down list above and then click order</html>");
 //Creates list of toppings - file paths must match name
 String[] toppingStrings = { "Olives", "Tomatoes", "Lettuce", "Turkey", "Ham", "Select a Topping"};
 pictureTop = new JLabel();
 //Selects item at index 5
 toppingList = new JComboBox(toppingStrings);
 toppingList.setSelectedIndex(5);
 tActionPanel.add(toppingList , BorderLayout.NORTH);
 tActionPanel.add(pictureTop , BorderLayout.CENTER);
 tActionPanel.add(orderTopButton , BorderLayout.SOUTH);
 tCenterPanel.add(tInstrucTextLabel);
 tButtonPanel.add(goBackButton2);
 tMainPanel.add(tActionPanel , BorderLayout.NORTH);
 tMainPanel.add(tCenterPanel , BorderLayout.CENTER);
 tMainPanel.add(tButtonPanel , BorderLayout.SOUTH);
 //Must go in this method, do not put in main
 toppingList.addActionListener(this);
 pictureTop.setFont(pictureTop.getFont().deriveFont(Font.ITALIC));
 pictureTop.setHorizontalAlignment(JLabel.CENTER);
 updateLabel(toppingStrings[toppingList.getSelectedIndex()]);
 pictureTop.setBorder(BorderFactory.createEmptyBorder(10,0,0,0));
 //Preferred size - widest image and the height of the tallest image
 pictureTop.setPreferredSize(new Dimension(177, 132));
 tCenterPanel.setBorder(BorderFactory.createTitledBorder("Instructions"));
 toppingFrame.setContentPane(tMainPanel);
 toppingFrame.setDefaultCloseOperation(toppingFrame.EXIT_ON_CLOSE);
 toppingFrame.pack();
 toppingFrame.setVisible(false);
 toppingFrame.setSize(350,390);
 //--------------------------Order Condiments----------------------------------
 //Declaring
 order = true;
 final ImageIcon condimentsImage = new ImageIcon("condiments.gif");
 final JPanel cTopPanel = new JPanel(new FlowLayout());
 final JPanel cCenterPanel = new JPanel(new FlowLayout());
 final JPanel cButtonPanel = new JPanel(new BorderLayout());
 final JPanel cMainPanel = new JPanel(new BorderLayout());
 final JLabel cInstrucTextLabel = new JLabel("<html>Please select a button below to order a Condiment</html>", JLabel.CENTER);
 final JLabel condimentsLabel = new JLabel(condimentsImage);
 cTopPanel.add(goBackButton3);
 cTopPanel.add(condimentsLabel);
 cCenterPanel.add(cInstrucTextLabel);
 cButtonPanel.add(mustardButton , BorderLayout.WEST);
 cButtonPanel.add(ketchupButton , BorderLayout.CENTER);
 cButtonPanel.add(relishButton , BorderLayout.EAST);
 cMainPanel.add(cTopPanel , BorderLayout.NORTH);
 cMainPanel.add(cCenterPanel , BorderLayout.CENTER);
 cMainPanel.add(cButtonPanel , BorderLayout.SOUTH);
 cCenterPanel.setBorder(BorderFactory.createTitledBorder("Instructions"));
 condimentFrame.setContentPane(cMainPanel);
 condimentFrame.setDefaultCloseOperation(condimentFrame.EXIT_ON_CLOSE);
 condimentFrame.pack();
 condimentFrame.setVisible(false);
 condimentFrame.setSize(350,390);
 //--------------------------Confirmation Screen----------------------------------
 final JPanel coMainPanel = new JPanel(new BorderLayout());
 confirmTextLabel = new JLabel("<html>Would you like to purchase " + itemName + " for a cost of $" + Currency.format(itemCost) + "?</html>", JLabel.CENTER);
 final JPanel coTopPanel = new JPanel(new FlowLayout());
 final JPanel coButtonPanel = new JPanel(new FlowLayout());
 final JPanel coCenterPanel = new JPanel(new FlowLayout());
 coTopPanel.add(goBackButton);
 coCenterPanel.add(confirmTextLabel);
 coButtonPanel.add(acceptButton);
 coButtonPanel.add(declineButton);
 coMainPanel.add(coTopPanel , BorderLayout.NORTH);
 coMainPanel.add(coCenterPanel , BorderLayout.CENTER);
 coMainPanel.add(coButtonPanel , BorderLayout.SOUTH);
 coCenterPanel.setBorder(BorderFactory.createTitledBorder("Correct?"));
 confirmFrame.setContentPane(coMainPanel);
 confirmFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 confirmFrame.pack();
 confirmFrame.setVisible(false);
 confirmFrame.setSize(350,390);
 //------------------------------Cart Screen----------------------------------
 final JPanel caMainPanel = new JPanel(new BorderLayout());
 final JPanel cartRPanel = new JPanel(new BorderLayout());
 final JPanel caButtonPanel = new JPanel(new FlowLayout());
 final JPanel caCenterPanel = new JPanel(new FlowLayout());
 caCenterPanel.add(cartRPanel);
 cartRPanel.add(cartItemLabel , BorderLayout.WEST);
 cartRPanel.add(cartPriceLabel , BorderLayout.EAST);
 caButtonPanel.add(goBackButton4);
 caButtonPanel.add(checkButton1);
 caMainPanel.add(caCenterPanel , BorderLayout.CENTER);
 caMainPanel.add(caButtonPanel , BorderLayout.SOUTH);
 //cartItemLabel.setAlignmentX(Component.LEFT_ALIGNMENT);
 //cartItemLabel.setHorizontalTextPosition(SwingConstants.LEFT);
 caCenterPanel.setBorder(BorderFactory.createTitledBorder("Your Items"));
 cartFrame.setContentPane(caMainPanel);
 cartFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 cartFrame.pack();
 cartFrame.setVisible(false);
 cartFrame.setSize(350,390);
 //--------------------------End of Constructive Method---------------------------
 //Updates the label when combo box is changed
 protected void updateLabel(String name)
 ImageIcon icon = createImageIcon("images/" + name + ".jpg");
 //Sets the image of the icon
 pictureTop.setIcon(icon);
 if (icon != null)
 pictureTop.setText(null);
 else
 pictureTop.setText("Image not found");
 //Returns an ImageIcon, or null if the path was invalid to the icon
 protected static ImageIcon createImageIcon(String path)
 java.net.URL imgURL = AdrianP1.class.getResource(path);
 if (imgURL != null)
 return new ImageIcon(imgURL);
 else
 //Prints out if file is not found in system window
 System.out.println("Couldn't find file: " + path);
 return null;
 public void updateConfirm()
 //------------------NOT IN USE-------------------
 if(whiteB==true)
 itemName = "White Bread";
 itemCost = bwCost;
 if(wholeB==true)
 if(italB==true)
 if(harvestB==true)
 //------------------NOT IN USE-------------------
 public void receiptPrint ()
 //------------------NOT IN USE-------------------
 final JLabel receiptLabel = new JLabel("<html>Your PST: Your GST: Your Total:</html>");
 final JPanel receiptPanel = new JPanel(new FlowLayout());
 receiptPanel.add(receiptLabel);
 receiptLabel.setFont(new Font("Serif", Font.PLAIN, 15));
 receiptPanel.setBorder(BorderFactory.createTitledBorder("Your Receipt"));
 //------------------NOT IN USE-------------------
}

I'm certainly not going to read all of that, perhaps someone else here will.You really think so? I seriously doubt it.
@OP: Please go through these links:
[How to ask questions the smart way|http://catb.org/~esr/faqs/smart-questions.html]
SSCCE
db

Moving Songs from Ipod to NEW computer- don't have old computer!! :-/

Hi everyone,
I have a 30GB Ipod Classic. My old computer died and I no longer have it. I bought a new computer and want to transfer all the music from my ipod on to itunes. When I try and do this it tells me my ipod is already synced with another library and it can only be synced with one at a time. It gives me two options: Erase & Sync (Erase songs off my ipod and replace them with the few I have on my new computer) or Transfer Purchases (which it wont let me do because they have not been 'deauthorized' off my old computer).
Does anyone know how I can transfer the music from my ipod onto my computer without having my old computer that was synced to this ipod????
Please help!!!!
Thanks for reading
saz

Regarding your purchases:
In iTunes, click Store > Authorize Computer and enter your information
When it says it is successfully authorized, connect the iPod and click Transfer Purchases
There are several applications that can be used to recover purchases from the iPod in the event of a computer failure, and no backup.
Some suggestions:
iPod2PC
http://www.casicakes.com/
SharePod
http://www.sturm.net.nz/website.php?Section=iPod+Programs&Page=Sharepod
Music Rescue
http://www.kennettnet.co.uk/musicrescue/
iRepo
http://www.purpleghost.com/index.php?q=irepo
iPod Access
http://www.findleydesigns.com/ipodaccess/indexWin.html
CG

F-53 and payment advice

Hi all,
does any one of you know how i can get a payment advice after i cleared my vendor invoices with transaction F-53.
I need to do this as the client wants to issue checks manually.
thanks
Dave

Hi
FS10N transacton code is for reporting monthly reports.
if you want see individual line items , you have to drill down the same reoirt(by double click).
Cost Center & profit center will change for each & every line items of gl account , it is not constant value for gl account.
But in FS10N you dont have line item wise reports.
Better to go for FBL3N gl line itemsreport.
hrere you can find the same report which you want.
chandra

MIRO balance error in case of invoice reduction - Brazil

Dear experts,
we would like to use the "invoice reduction" functionality in MIRO in Brazil. This is possible without problems in case there are no taxes.
If there are taxes we get balance errors due to the fact that the 2 FI-documents which should be posted do not balance to 0 (only the total balance is 0).
Does anybody know how to treat this problem?
Regards
Andreas
Edited by: Andreas Sturm on Sep 17, 2010 2:50 PM

Moderator message:
Hi Andreas, Portuguese forum, please post it in that Language. May translate.google.com help you to read and post.
I've translated this one for you.
Caros experts,
Gostariamos de usar a funcionalidade "invoice reduction" na MIRO no Brasil. Isto funciona sem problemas se impostos não existirem.
Se existem impostos então recebemos um erro de saldo pois 2 documentos de FI são postados e o saldo não é 0 (somente o saldo total é 0).
Alguem sabe como tratar este problema?
Andres, a thread IVA Revenda com ICMS, IPI, PIS e COFINS para não contribuinte do IPI pode ser útil.
Atenciosamente, Fernando Da Ró

How to configure Exchange 2010 to use a certain MX record that is unavailable with public DNS

Dear all,
as for TLS encryption I'm required to send emails destined for a certain domain via a dedicated send connector that has TLS encryption enabled/enforced. Thing is that the recipient's corresponding domain MX records cannot be resolved using public DNS. As soon
as I verify MX records for the recipient's domain using nslookup I only receive MX records that do not accept TLS. In order for TLS to work I'm required to send all outgoing emails to that specific domain via a certain predefined host, i.e. MX record, that
is known to me and Exchange needs to know as well. But how can I configure Exchange to use a certain MX record (that resolves to mxtls.<domain>.com instead of mx.<domain>.com without being available in public DNS?
Editing the hosts file directly on the Exchange server? Not an option, right?
Messing with my ADS integrated DNS not an option, too, as I then have to add all sorts of entries for that zone, e.g. www and stuff like that, to make it work?
I'm lost here, any help would be greatly appreciated.
Alex
Alexander Ollischer Diplom-Wirtschaftsinformatiker (FH) Citrix & Microsoft Certified Engineer (CCEA, CCEE, MCSA, MCSE, MCDBA, MCTS) Afontis IT+Services GmbH Baierbrunner Straße 15 81379 München Deutschland Telefon (089) 74 34 55-0 Fax (089) 74 34 55-55
mailto:[email protected] http://www.afontis.de http://www.itganzeinfach.de Amtsgericht München, HRB 109 005 Geschäftsführer: Thomas Klimmer

Well, I figured it out by myself. I just had to add the corresponding server, i.e. mxtls.<domain>.com, to the Smarthost configuration for the corresponding Send Connector and set its RequireTLS setting to $True.
Alex
Alexander Ollischer Diplom-Wirtschaftsinformatiker (FH) Citrix & Microsoft Certified Engineer (CCEA, CCEE, MCSA, MCSE, MCDBA, MCTS) Afontis IT+Services GmbH Baierbrunner Straße 15 81379 München Deutschland Telefon (089) 74 34 55-0 Fax (089) 74 34 55-55
mailto:[email protected] http://www.afontis.de http://www.itganzeinfach.de Amtsgericht München, HRB 109 005 Geschäftsführer: Thomas Klimmer

How can store .gif into oracle ?

Hai,
when i am inserting .gif file into oracle,i getting the sql error message at run time like java.sql.sqlException [oracle][odbc]No data at execution values pending.
I have placed a valid .gif file path ,while i have creating file objct.
i have used below the coding to insert .gif into oracle,
Demox.java
public class Demox
public static void main(String x[])
ResultSet rs;
Connection con;
Statement st,st1;
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:mydsn","scott","cipl");
st=con.createStatement();
File file = new File("c:/mahesh/oracle.gif");
System.out.println("file cotent is"+file);
InputStream inStream = new FileInputStream(file);
System.out.println("before prepstmt");
PreparedStatement psmt =con.prepareStatement("INSERT INTO + demo(id,pict)VALUES(?,?)");
psmt.setString(1, "Logo");
psmt.setBinaryStream(2, inStream, (int)file.length());
psmt.execute();
//HRER ONLY I GOT THE ERROR MSG LIKE [oracle][odbc]No data at execution values pending.//
System.out.println("after execute");
if(psmt != null)
psmt.close();
if(con != null)
con.close();
catch(Exception q)
{System.out.println("Hai:"+q);}
In database i have used long raw datatpe to store .gif file,meanwhile
I have tried blob as datatype to store .gif,still i got the same exception
:[oracle][odbc]No data at execution values pending....
So,any one could me out from this probs.It's little bit urgent....
Regards,
mahesh.

Hi
Instead of storing the file in the database. Store the image in a file on the disk and store the path to the image in your database. This is one good way of doing this.
Good Luck!
Eshwar Rao
Developer Technical Support
Sun microsystems inc
http://www.sun.com/developers/support

Grüße Fräulein, Sturm-Verbot-Führer, Hello, we are with some questions

Similar Messages

Maybe you are looking for