GS70 2PE only boots to BIOS after flash.

Hi.
I reinstalled windows 8.1 cause of some problems
Everything was working fine after reinstall, then i found out i wanted to update the BIOS in order to have everything updated.
I downloaded my BIOS file from the site i get all my drives and utilities (MSI webpage)
Which seemed like a good idea.(Well messing around with BIOS usually never is, but at the time it did )
I followed the instructions from the link that was included in the BIOS file. So i did not do anything wrong during the "steps"
At first everything went fine. The flash was succesfull. I restarted and the screen just started flashing. And it wouldn't stop.
It was late so i gave up.
The next day i started the computer the screen didn't flash at all. Now it just wont boot into windows it only boots into the BIOS.
The version on the bios went from 1.1 to 1.2 after i updated.
Does anyone know what i can do to fix it?

Quote from: sivertsen.jim on 18-February-15, 17:36:14
I need to make a new post cause i cant edit the other 2 for some reason.
I can get through to windows but now its just bugged. every time i log on windows now it acts as if i was logged in with another user when i wasnt.
And EUFI wont let me start the computer at all, and i cant boot anything with the legacy mode activated.
Does anyone have a link to older versions of the BIOS for the GS70 2PE?
laptops can't do backflash :/ doing that will just give you a error saying that this version is older than what current one is installed :/ secondly RAPID thingy you get is because your laptop uses RAID so the intel rapid storage technology or w.e name is will pop up on boot under LEGACY. When RAID is assigned.

Similar Messages

  • Satellite A500-1DN (PSAR3E) - Dead BIOS after flashing

    Hi all.
    At first, sorry for my english.
    My problem is simple I have a dead bios after flashing from toshiba service station (or something like that).
    How does it happened? :4 days ago it was asking me for update. It was for me totaly normal because it is asking for some updates every day. I enablished that update and after some cliks on button next I noticed that it was BIOS update and it was nearly at half. I wanted to wait to end (because i know if I stop bios uptade I end up with dead bios(corrupted bios)) but it stoped nearly at end and it showed me some errors. After that my laptop made a restart and i could not stop it. It turned off.
    Now if i push power button i get black screen (like it is turned off) som leds lights and Cpu fan at 10% maybe.
    What i did 3 last days? : I searched all the interned about what to do with it. I tried maybe 10 types off crisdisks with usb and CD(with floppy not becose Bios for my laptop is too big for 1 floopy).
    I tried to boot with FN+B it worked for me CD drive started to search for CD, USB drive showed activity but to dead end happened nothing. I tried to make Boot usb with newer minidos.sys and phlash16.exe. I tried to combinate it but still nothing.
    I tried all what i found on forums everywhere on internet. nothing helped.
    Another thing is that only one bios i found was 1.90. If somebody has a older bios for my laptop pls give me link. I am losing hope becose i cant find anithing on google.
    I am a advenced user I did nearly everithing with pc but i never worked with dead bios.
    Pls help me somebody and give me a correct crisdisk for my model. Or different sugestion.

    hi,
    sorry, mate but you should contact the Asp http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/
    Unfortunately, the warranty doesn't cover bios failure and you will have to pay about 50-60 Us dollars (Anyway, it costs like this in my service center)

  • GE70 2OE stays in BIOS after flashing BIOS -- RESOLVED

    I flashed the BIOS on my GE70 2OE-017US tonight. The previous version was E1757IMS.51B, the new version is E1757IMS.51C (http://www.msi.com/support/nb/GE70-2OE.html#down-bios&Win8 64). The flash process was successful. However, it cannot launch the Windows 8 login screen. It enters the BIOS automatically.
    I am sure that I downloaded the proper version of the new BIOS file and flashed the BIOS correctly (I flashed to the 51B version from 517 version successfully in June.)
    I tried the following, but neither works.
    1. Downloaded the 51C BIOS file and flashed the BIOS again.
    2. Turned off the laptop, removed the power cord & the battery, then installed the battery and connected to the cord, and turned on the laptop again.
    The bad thing is that I do not keep the previous 51B version file after the last flash, or I could try to flash back to the old version.
    Does anyone have any ideas? Thanks.

    The ISSUE has been resolved!!
    After checking the BIOS setup thoroughly, I figured out that the following Boot Option WAS DISABLED!
    Boot tab -> UEFI Hard Disk Drive BBS Priorities -> Boot Options #1
    The laptop functions again after setting Windows Boot Manager in the above configuration.
    I conservatively guess it was introduced by the new BIOS file. Anyway, the laptop works again.
    I posted it here in case anyone happens to have the same problem after flashing BIOS.

  • Only boots to windows after using bootcamp

    Hello,
    I tried using bootcamp today and installed Windows 8. My machine now only boots to Windows 8, but without any network support (just to make life more difficult) and I have no access to OS X. I have used the Windows computer manager to view the disc partitions and these seem right and what I expect.
    Is there something that would allow me to change how my mac boots, or can anyone offer any advice? The machine is only a couple of weeks old and so all drivers and operating system is up to date.
    Thanks.

    MarkMB wrote:
    Hello Bob,
    Thank you for your quick reply. I didn't download anything. I went to the Apple site and watched the video to see how it is done and then to Boot camp assistant, where I choose a fresh install of Windows. The option did say Windows 7 or later! I didn't know Win 8 is not supported.
    Now I have a Win 8 install and for the most part it seems okay - just need to be able to install a network driver!
    You must download the Windows Support software then after booting into Windows you must install the downloaded software. This software includes the Bootcamp Windows drivers (including the network drivers). But, there are no Windows 8 Bootcamp drivers http://support.apple.com/kb/HT1899.

  • N500 won't boot windows xp after flashing BIOS

    Hi, I purchased an N500 a couple weeks ago, it's been running fine on xp, except occassionally I'd get disconnected from the internet (a line problem, not the computer, happens here in egypt) but the wireless would not automatically reconnect to my line once the line was back up.  The log file for the wireless card said something like "unable to set proper band" when this happened.  Anyway my driver version was the latest version, so I thought maybe I needed to update bios.  So I flashed bios using the flashbios utility that is listed on the lenovo website in the download section dedicated to my laptop model.  The laptop then restarted itself, and then I got the black screen that says "We apologize for the inconvenience, but Windows did not start correctly...." blah blah blah.with options to start up in safe mode, last known configuration that worked etc.  However when I choose ANY of these options about 3 seconds later I get the blue screen of death, and the computer restarts!  So how do I get myself out of this mess!  Thanks Lenovo for that great Flash utility by the way!!

    Try reinstall the OS. I hope it works. My opinion is when you update BIOS, The OS detected as a new computer (for some pcs). Try repair The OS with boot from CD.
    Good Luck,....

  • Password to BIOS after flash

    Hello, I have a problem.
    I flash BIOS on my ntb Toshiba Satellite A215-S4697. I Used ACPI Flash BIOS version 2.30 for Satellite A210/A215 (PSAEGU/PSAELU) 32/64bit form Win 7 Ultimate 64bit. After restart I see only Enter password. But I dont know how, I never set it before. Can You help me please.

    HI
    I have the same problem.
    Toshiba Satellite A215-S4697. I Used ACPI Flash BIOS version 2.30 for Satellite A210/A215 (PSAEGU/PSAELU) 32/64bit form Win 7 Ultimate 64bit.
    Some one can help us?
    tks

  • Windows 7 only boots from bios, Start-up repair cannot identify windows.

    So I recently bought a Samsung SSD 840 PRO 256GB to replace my 80GB Intel SSD. My plan was to migrate Windows 7 to the new drive, delete the old drive and install Ubuntu 14.04 on it. I used this tutorial to transfer the data: https://www.youtube.com/watch?v=qYK-C4rIxrI
    It didn't work the first time, so I tried a second time (it overwrote the data from the first try.) and it looked like it worked. I unplugged everything except the Samsung, and it booted fine. Then I took the Samsung off and installed Ubuntu 14.04 on the
    old drive (which seems to have its own issues, but I will deal with that later.) 
    When I try system repair, I am unable to choose an OS to repair. When I try bootrec /rebuildbcd it says it cannot recognize the file system and to make sure the system drivers are loaded.
    BUT, I can still boot to Windows if I select the drive in bios. (I think Ubuntu is broken, because that wont boot at all.)
    My priority is to get windows working, hopefully without reinstalling. 

    I fixed it somehow, but that was not the problem. I re-installed Ubuntu on the old drive, except I completely deleted all the stuff on the drive first. Then I rebooted both drives separately, they both booted automatically. Now everything works except the
    grub boot loader. 
    I did say that I could still boot to windows by selecting the Samsung in the bios... so your answer didn't help.
    I think that the old drive might have been overwritten the wrong way and there was still something from that drive messing with the boot order. That might explain why it worked when I had only the Samsung hooked up.

  • OS not booting after flashing BIOS

    I have a K7N2 Delta-L , i flashed the bios to version 5.8 , but it showed my prsessor speed as 1350mhz when it should be 1800mhz(Athalon 2200xp+).
    The bios flashing utility had asked if i wanted to save my current bios before flashing , so i did.
    Since 5.8 didnt work out i thought it prudent to restore the previous bios , but after doing that the computer refusted to boot , it completes the post and detects evrything properly but after that is shows me a blank screen with the cursor flashing , the diagnostic led's show me that it has halted at floppy drive controler initilization.
    Now my bios shows verion 5.1 when i think i had 5.4 earlier , i disabled the bios from detecting the floppy drive ,disabled the floppy drive controler and disconnected the folppy drive but it had no effect , i then connectd the floppy drive back and did the bios recovery method described in the manual , but that too had no effect.
    Please help me

    I deleted your other thread.
    Please don't post multiple threads for the same subject
    If you want to move the post to the top of the page, simply post a reply to the original and it will bump it to the top

  • P55M GD45 experience; only 1.1 bios works, forum usb key boot didn't work, Win 7

    My experience. Got board w/ 1.1 BIOS installed, installed Win 7 64-bit. Used LiveUpdate to flash BIOS to 1.5.
    Then box froze at "Starting Windows" screen. However it would boot ok to Safe Mode, and also Safe Mode with Networking. It wouldn't boot to Knoppix, Ubuntu LiveCD, ... (In Windows 7, I spent hours trying stuff, did boot logging, turned off startup services, piles of stuff, but didn't seem to be getting anywhere...)
    Tried using the Forum USB Key boot for BIOS flashing. Couldn't get it to boot, just got black blank screen with cursor. (Could this be because board doesn't support 98/ME?)
    Finally figured out the M-Flash option, and tried 1.4, which gave same results as 1.5. Then went back to 1.1 and that got my Win 7 booting again ok. Then tried 1.2 and that gave same result as 1.4/1.5 (screen freezing), so went back to 1.1.
    Later tested out HP USB key booter and that worked for me, though I didn't end up using it for anything, since I went with the M-Flash.
    I was hoping that this new board would help me have better eSATA (hot-swappable/recognizable), than my previous setup but it's actually worse. With my old setup, I could plug in an eSATA drive, then Add Hardware, and the drive would be recognized by Win (XP). With this new setup, eSATA drives only get recognized if I have them connected and on before I boot up my box. Not good. Also, the BIOS has a tendency to prioritize the eSATA's before the regular SATA's in boot order, which seems weird.
    Anyone else have any experiences like this? Any suggestions on moving towards a BIOS upgrade and more eSATA functionality (ideally without spending another 12 hours on it )
    Thanks for reading and in advance for any suggestions!!
    MSI P55M GD45
    i5-750
    2x2gb g.skills ddr3
    64GB SSD (Crucial)

    I have exactly the same problem and a reinstallation won't solve anything !
    You will even not be able to finalize the installation !
    Freeze in Windows Seven after several minutes even after having cleared CMOS + loads of optimal mode or fail safe mode...
    Here is my computer:
    -MSI P55M-GD45
    -Intel CoreI5 750
    -Noctua NH-D14---> CPU @ 28°
    -2 X 1Go Crucial Balistix DDR3
    -2 X SAMSUNG SPINPOINT T166 - 500GO SATA II 7200TRS/MN 16MO (HD501LJ)
    -2 X Seagate 1.5 To 32 Mo 7200 tpm
    -2600XT fanless gigabyte
    -Corsair 520VX or HX I forgot it
    No problem with the last bios 1.1.
    !!!!! Totaly unstable with the last bios 1.5 !!!
    I read your solution about reinstalling the OS after a bios update (that's the first
    time that I read it and I owned something as 15 motherboards in the last 10 years...but
    you have 20k post so I think that you know what you write...)
    So I tried to REINSTALL after "upgrade" of the firmware 1.5 of the MSI P55M-GD45.
    I did it with a USB KEY....not [email protected] with defaults values !
    The only thing to do is downgrade the bios in 1.1 and now no problem @ 3.8 GHz !!!
    WHY IS THIS BIOS SO unstable ?
    What will MSI do ?
    I have never had a so unstable motherboard after a bios upgrade !

  • Z68A-GD80(G3) Can no longer read external hd dock after flashing beta bios

    I flashed E7672IMS.J31 Beta Bios because I was on a very old bios that was not compatible with my GTX 970 card I just bought.  Flashing the bios fixed my 970 compatibility but in the process made it so my 2 external hd docks no longer worked (at this time on windows 7).  self powered usb harddrives still worked though.  At this time my sata mode was IDE which I thought might have had to do with it since it doesnt have hotswap. I assumed it was an issue with some drivers I installed after flashing the beta bios and I was due for upgrading/reformatting anyways so I enabled AHCI and hot swap then did a clean install of windows 8.1.  The external hard drives still don't read!!   I've used multiple different hard drives and different usb ports including usb 2.0.  The docks are usb 3.0 and I use them daily to edit photos from my work.  Any ideas of things I could try?
    My pc:
    intel 2500k
    16gb Corsair vengeance ram
    MSI 970 GTX GPU
    Corsair 750w power supply
    Z68A-GD80(G3) motherboard
    E7672IMS.J31 Beta Bios

    Could the issue be that I didn't download the Intel Management Driver after installing the beta bios I flashed?  Maybe I could try that first, which one from this list do I use with my pc setup?
    thanks for the help!
    Quote from: flobelix on 20-October-14, 00:38:02
    Try going back to E7672IMS.J20 OFFICIAL. Use the recommended flashing method with provided archive only: https://forum-en.msi.com/index.php?topic=163870.msg1215101#msg1215101

  • GE60 2PE Don't boot to BIOS, notebook bricked.

    Hello, Yesterday night I was watching a youtube show on my netbook, running without power supply only with the battery (I only done this for 3 times in 7 months so I'm not worried about battery being discharged) and I fall sleep. This morning when I waked up, I tried to boot from hibernation to properly shutdown the system but the netbook doesn't boot.
    Things I tried to do:
    1º - I tried to power on normally only running from battery. Only power on with blue/orange power light, and a small light from the HDD for 2 seconds nothing happened.
    2º - Power off by pressing power button for 4 seconds. I waited 5 mins I plugged in the power adaptor and I tried again with same results, don't boot.
    3º - Removed battery and power adaptor, I pressed power button for 60 seconds to discharge (i saw this advice on Youtube). Plugged in only power adaptor and tried to power on. Same results, don't boot.
    4º - Removed battery and power adaptor, presed power button for 60 seconds to discharge (). I connected the netbook to my TV with a HDMI cable, plugged in only power adaptor and tried to power on. Same results, don't boot.
    Symptoms:
    Power on, power LED in blue color for half second later turns to orange color only, no blinking only the same orange color all the time. The fan starts to spin in normal speed, HDD led blinks for 1-2 seconds and off. The screen is off (no light even on the back cover where the MSI dragon badge is), don't appears MSI logotype, no BIOS mesage or sound, no screen(fully black no backlight) no HDD. Laptop keeps running.
    System info:
    MSI GE60-2PE "Apache Pro",
    Geniune Windows 8.0 PRO (My own license not from MSI, and it's 8.0 not 8.1 I don't like to update)
    BIOS UEFI in fast boot mode, legacy USB disable. USB Handoff fixes disabled in BIOS, Enabled only boot from HDD/win8. The rest i think it's default settings.
    BIOS: E16GFIMS.529 (previously .528 and .526)
    Motherboard: MS16-GF
    EC Firmware: 16GFEMS1.50B (I can't remember if I updated firmwares previously)
    Touchpad Firmware: 03
    HDD:Standart WD HDD, no msata drives. No intel RAID.
    DVD: Standart LG DVD.
    RAM: 4Gb Standart Samsung/Hynix? SODIMM + 4Gb GSkill DD3L 1.666Mhz (1.35v) upgraded by myself.
    All drivers installed with the exception of the integrated radio switch controller.
    Intel HD 4600 - OK (updated 01/2015 from manufacturer)
    Nvidia Graphics - OK (updated 12/2014 from manufacturer)
    Intel WiFi/Bluetooth 3160 - OK (updated 01/2015 from manufacturer)
    Atheros KillerNIC - OK (Drivers version from MSI DVD)
    Elantech Touchpad - OK (updated in 01/2015 from MSI support page)
    Intel chipset stuff - OK (update 12/2014 from manufacturer)
    Webcam - OK (no drivers installed, work with windows8 deafult drivers)
    Software installed:
    Only MSI KLM (keyboard light manager) with also installed a SCM service.
    The netbook worked smooth since the begining until today for 7 months (really great hardware). The only thing i suppose that could be a problem with BIOS update (I updated two weeks ago) or EC firmware (I updated 3-4 weeks ago), since I don't worked withour power adaptor from new year, until today.
    There's something I could do that I miss? a reset jumper, or reset CMOS button. Or I should ask to RMA to my netbook shop.
    PD: I don't like to get a replacement netbook from other RMA user. I want my machine, I know what it's done and how it's done,  I have my stickers in mint condition, I know my battery is well mantained, I have my FAN clean, I have the exterior and screen really clean and without scratches, have all my personal data on HDD. Should be worried about getting someones netbook? I should remove the HDD to avoid my personal data being compromised and I can lose them (i don't have backup)?
    Also apologize my english, but the spanish forum looks empty and dead, only see news.

    I suppose so, thanks chc for your time reading my issue.
    I should contact my shop for RMA.

  • MEGA 865 Computer doesn't boot after flashed.

    my problem is .. :
    Update My Mother Board  Bios and dawnload a file from this site
    a file is (AWFL833D.EXE W6797IMS.130 ) for update my mother board Bios
    when update completed Restart a Computer ... and here a problem
    my Computer doesn't boot after flashed.
    i read a (How to flash the BIOS.doc) file and executing a instructions and i am fail.
    when i read a (How to flash the BIOS.doc) file i found a Write:
     If your system doesn't boot after you flashed, please refer to the BIOS recovery method as described.
    i changed a Mother Board clear CMOS jumpers for clearing ,
    and not success and the problem is until stay.
    i want a solution please.
    thanks.

    Does your computer do or show any error mesages on the screen when rebooted. You did do this in DOS didn't you?

  • BSOD after flashing BIOS

    Hello everyone,
    I have encountered a problem after flashing my mobo with a new BIOS (either "official" 3.3 or 3.36 or 3.41 beta which I have received from MSI tech support because of famous >219 HTT problem).
    Flashing goes okay, and after reboot, just before the Windows XP loading logo should appear, I get a qiuck BSOD and then restart. It's too fast to read anything, and running Windows in safe mode doesn't help. Returning to the original BIOS 3.1 solves the problem.
    But as I've read few people tried both BIOSes and it worked... so where could be the problem?
    I'm very sorry for my english...
    My configuration:
    A64 3000+ (Winchester CBBID) 
    MSI K8N SLI Platinum
    2x 512 MB RAM (Hynix D43) dual mode.

    Quote from: Cimmo on 30-May-05, 19:35:28
    Same issue
    After official 3.3 bios update from MSI Live Update Windows crash!
    My Windows doesn't reboot after BSOD and it says:
    STOP 0x0000007B (0xF79F7528, 0xC0000034, 0x00000000, 0x00000000)
    Backing to bios version 3.2, Windows boots normally
    MSI K8N SLI Platinum (MS-7100-030)
    AMD Athlon64 3000+ Winchester
    2x512 MB of ram (dual channel)
    1xClub3D Geforce 6600 GT
    if you need some others informations tell me.
    Please fix this and reply to this thread ASAP!
    EDIT: Provided more informations, see bold lines
    cosa dicono? non capisco l ingkese
    ciao
    tino

  • How to access the BIOS on the GS70 2PE STEALTH PRO

    Hi all,
    I recently purchased the GS70 2PE STEALTH PRO, and I need to access the BIOS to enable hardware virtualization, but I am unable to do so?
    The laptop starts up in < 3 seconds, and I have tried many different keys with no luck.
    How does one access the BIOS?
    Regards,
    Marius

    if your power it on by closing and opening laptop then thats only sleep mode to fully enter bios power windows fully off through windows 8 then press power button and once MSI logo appears spam DELETE button like mad untill you see bios

  • MS GS70-2PE BIOS issue

    Hi,
    Recently i began to get an issue when you press delete button all it gives is black screen with "-" on screen.
    I have not flashed bios or anything :/ so i have tried holding in the battery reset and that did not solve it and i have done power button same there nothing solved so does anyone else have a fix for this? since i cannot enter bios at all now.

    well no i havent and now i began to get issue again -.- so yeah i might flash it to see if it solves it
    I have not flashed 10A yet so yeah i cannot do it while bios refuses to work at all :(
    Update: now i have new issue :( now it refuses to boot at all since i remains stuck on MSI logo for ages and that power button is lit up orange so if i take hout msata and HDD it still does same it wont boot at all now not even into USB drive or into bios anymore :(
    Update 2: Now laptop gives that "-" issue again when booting into bios -.-
    Update 3: whenever i put my msata and 1TB back it locks itself on MSI logo again but if i only have 250GB hard disk i got on side putted in then laptop throws black screen with "-" on it :/
    so i think its bios issue.
    Update 4: i have tried the EC reset nothing either :/ bios isnt responding to me at all it's like it has hanged itself :/ so only fix for me would be disamble the laptop completely and remove cmos battery and see if that would power down the bios chip and then i put it back but doing so will then make it void warranty :(
    Update 5: i have contacted the store and hope they will replace it asap since i cannot find fix for this problem :(

Maybe you are looking for