GSS for email server

Greeting,
Could anyone advice me if GSS4492R can be used to email server infrastructure?
If so, how to do it? how to setup MX record?
Any comments will be appreciated
thanks in advance

GSS2.0 with CNR supports GSLB (Global server load balancing) of MX
records.
Here are the details
Each query is processed as follows, depending upon its type:
*A Queries- The GSS processes these queries and responds if it finds a
reply for the query. If it fails to find a reply, it queries the CNR
subsystem for a reply. The CNR reply is then forwarded to the D-Proxy.
*All other Queries- These queries are forwarded to the CNR subsystem.
The response from the CNR subsystem is forwarded back to the D-Proxy. If
the response contains A records in the Additional Section, the GSS may
perform its own query processing and modify the Additional Section of
the Response to provide a load-balanced A records in the Additional
Section.
More information available at:
http://www.cisco.com/en/US/products/hw/contnetw/ps4162/products_configuration_guide_chapter09186a00807e0a33.html
Section: Using the GSS as a DNS Appliance

Similar Messages

  • Spam filter for email server

    Depends on what you want to pay. There are various ways of doing this.
    1. block at your firewall. I have a watchguard and this acts as my first line of defense.
    2. Install an app on your mail server - I have Symantic for Exchange as my second line 
    but then you can go and signup to outside organisations such as messagelabs to handle all your filtering for you.

    hi all,
    im running postfix+dovecot for an email server and i want a spam filter to go infront of postfix so it can filter out spam before it gets anywhere near my email server
    also i imagine with spam filters you can set your own spam policies and allow good senders and block bad senders
    many thanks
    rob
    This topic first appeared in the Spiceworks Community

  • Starting guardian process for eMail server

    I've installed a new database, with the standard settings given on the install CD, and the Oracle eMail server on a Windows 2000 os.
    The problem starts when try to start the email server node's guardian. I have to submit the Service Name, the database name in the TNSNAME.ora. When I try to save the value I get the following error message: "oracle.io.admin.common.PropertyException".
    What does that mean and what should I do to get the service running?
    Regards
    /Jonas Dannaeus
    null

    I have the similar problems.
    Conditions:
    I tried to install Oracle EMail Server v5.1 (the package was downloaded
    from these URL:
    basic: http://technet.oracle.com/cgi-bin/go?email51nt-full
    patch set: http://technet.oracle.com/cgi-bin/go?es51patch2nt )
    on the machine with the following configuration:
    Hardware:
    Intel Pentium III 600MHz, 512Mb RAM, 30Gb IDE HDD, 20Gb free on
    destination volume.
    Software:
    OS WindowsNT 4.0 Server Service Pack 4
    and following Oracle products installed:
    Oracle8i Enterprise Edition 8.1.6.0.0 (installation option - typical)
    Oracle Portal 3.0.6.3.3
    Oracle Internet File System 1.0.8.1.0
    Resulting messaging system must consist of one TCP/IP node, that is all
    EMail processes (possibly except Sendmail, see questions below) will run
    on the same machine. This node also must be the configuration node.
    Installation of EMail Server (default option - includes all products)
    performs well, installing server into the same OracleHome, as the
    Oracle8i Enterprise is located in.
    The configuration options are as follows:
    Create a new node
    Create a custom Email Server node
    Yes - this is the first Email Server node that I am installing
    Timezone selected - (GMT +3:00) Russian Standard Time
    Enabled servers:
    POP3
    POP3 using SSL
    Yes - I want to enable SMTP gateway on this machine
    Define and configure a new gateway
    No - I don't want to enable the LDAP access on this machine
    Yes - I have an existing database
    Further configuration, including creation of all needed database
    objects and Windows NT service (named OracleInternetMessaging<SID>),
    also performs nice.
    After these steps (installing and configuring) I tried to run
    OracleInternetMessaging<SID> service from Windows NT services window
    (Oracle database and TNSListener services were launched earlier).
    Launch failed with error message:
    'The OracleInternetMessaging<SID> service returned service-specific error 1.'
    Then I tried to start Email Server manually as described in installation
    guide (section postinstallation). ofcguard command reported that
    guardian had started, but command
    'ofcguard status'
    returned following string
    'Status down'
    When I inspected log file, located in directory %ORACLE_HOME%\office\log\<SID>,
    I found there following lines:
    01/11 13:12:00 INF: Guardian Version 5.1.0.1.51 started.
    01/11 13:12:00 INF: Logged into database.
    01/11 13:12:00 ERR: Failed to get database timezone information.
    What is the reason of these problems?
    Could you answer these questions also:
    1. In postinstall section of installation guide is written that setup
    makes changes in file tnsnames.ora. But I didn't found any changes
    in it. But setup placed in the directory
    %ORACLE_HOME%\office\admin\samples
    another file, that consists of old tnsnames.ora and several new lines,
    something like this:
    crocus.world =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = tcp.world)
    (PROTOCOL = TCP)
    (Host = crocus)
    (Port = 1521)
    (CONNECT_DATA = (SID = CROCUS)
    crocus_guardian.world =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = tcp.world)
    (PROTOCOL = TCP)
    (Host = crocus)
    (Port = 1521)
    (CONNECT_DATA = (SID = GUARDIAN)
    Should I place this new file instead my old tnsnames.ora (I did it,
    but it had no effect), or what shuld I do else?
    NB: Something similar occurs with listener.ora file.
    2. Problem with Sendmail: From Oracle Email Server installation
    guide I concluded that Email Server uses in its work Sendmail
    through properly configured SMTP gateway. The question is:
    Sendmail itself must run on the same machine as Oracle Email
    Server or it may run on another computer in the network?
    If Sendmail MUST run on the same machine as Email Server,
    then where I can get REAL Sendmail for Windows NT platform?
    I found several Sendmail's for NT, but all of them can only
    send messages from the command line. None of them is able to
    run as NT service to handle inbound and outbound mail traff ic.
    3. In the Oracle Email Server administration guide (chapter #19 -
    'Error Codes and Messages', item 'Messaging Server Messages',
    error DA-10505 - 'Could not start server processes.') the
    dbms_alarm package is mentioned. I don't have this package
    installed at the moment. I didn't find any references to it
    in Oracle documentation also. But my installation of Oracle 8i
    Enterprise now includes the dbms_alert package. Maybe dbms_alarm
    is a typing error and dbms_alert must be in its place in
    Administration guide? If I'm wrong and documentation is OK,
    then the question is: should I really have the dbms_alarm
    package installed and if so, where can I get this package?
    null

  • Is this the right list for Email Server 5.1

    please tell me if I can post messages about email server 5.1 here
    null

    This board is for discussion of the Oracle Internet File System. The Oracle Email Server 5.1 is not part of the Oracle Internet File System, so we are unable to provide support for that product in this forum. Please contact Oracle Worldwide Support for further assistance.

  • Finding the IP address for email server

    Thanks, where would I find that in the management console? Tha name? It is housed on a domain controller. So would the name be the name of the DC?

    I am attempting to configure some printers to scan to email. It is asking for the mail server IP address. We have a "webmail" (mail.businesname.com) address that users can check email from when away from their work pc or phone. The Exchange management console is on a domain controller, which is on a seperate network (different state). The ip for the DC which it is housed is something like 192.168.4.xx and our network is 192.168.2.xx.
    I wouldn't use the IP address for the DC where the Exchange console is housed would I? I also pinged the mail.businessname.com and got an ip address but am not sure about which is the mail server address and/or how to find it?
    This topic first appeared in the Spiceworks Community

  • Without IT resource email Server config notification triggering in OIM 11g

    Hello Experts
    Its strange, in some of our environment. We haven't given any value for email server IT resource but still we are getting notification after user creation and so on. Not sure whether any default mail server comes with OIM 11g. We checked with environment team they are saying there is no mail server configured in oracle enterprise linux box by them.
    Could any one help us on this and provide your inputs ?
    Thanks
    DK

    Where are you checking the emails ??
    BTW , these notifications are OOTB and you turn them off by setting a System Property .
    Its something like Recon.SEND_NOTIFICATION , set it to false .
    But w/o email server , you shouldn't receive any email ..
    Thanks
    Suren

  • TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    Sometimes deleting the account and then re-creating it can solve this issue
    Write down all the information in accounts before doing this
    Highlight the account on the left and click the minus button
    Then click the plus button to add the new account and follow the prompts

  • I have an apple iphone 4gs... It is synced with my outlook exchange in the office. If I do a search for emails that also checks the server then all of a sudden I end up with various amounts unread email with the inbox saying "Inbox 71" ..which is not true

    I have an apple iphone 4gs... It is synced with my outlook exchange in the office. If I do a search for emails that also checks the server then all of a sudden I end up with various amounts unread email with the inbox saying "Inbox 71" ..which is not true. The only way to make the inbox on the iphone back to 0 is to delete the account then re install it.
    Anyone have any ideas

    We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

  • Using nsMail email server, works fine in ns email tool, as of yesterday TBird 31.3.0 can not send or receive email. Have verified all setting for IMAP/SMTP OK.

    Will not retrieve incoming emails. When I try to send one, error message appears: "Sending of message failed.
    The message could not be sent using SMTP server smtp.ullisart.com for an unknown reason. Please verify that your SMTP server settings are correct and try again, or contact your network administrator." I have checked all IMAP/SMTP settings and they are fine. I can receive and send emails to the same address via the email server provider's email tool. Using nsMail, WIndows8, Firefox, latest version of TBird. All worked fine two days OK and have made no known changes to computer installation since.

    ExchangeITPro,
    Thank you for your reply.
    >what SP are you at?
    As noted in the first paragraph: "We have an Exchange 2010 server, running under Windows 2008R2. Both
    the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs."
    >try restarting the transport services.
    Done previously as well as the entire server. No change.

  • Send email is not working in share point desinger 2013 for project server 2013 workflow

    Hi,
      How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
     i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
    Thank you for helping us.
    Thank You
    Vinay

    Hi,
      How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
     i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
    Thank you for helping us.
    Thank You
    Vinay

  • Photoshop Elements 5.0 PC.  Moved.  How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures.  Thanks

    Photoshop Elements 5.0 PC.  Moved.  How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures.  Thanks

    You say you have the pse 5 disk?
    I guess you do't have a dvd drive on your new windows 8 computer?
    Do you have access to another computer with a dvd drive?
    Anyway if you can find another computer with a dvd drive you could copy the pse 5 install disc to removable device like a camera card or flash drive.
    You can also buy cheap usb dvd drives.

  • Have same username and password for Apple and iCloud. Main email server is btinternet with different username and password. When I try to share a photo using iCloud email I get message that "email server didn't recognise username/password combo". Help.

    I have the same username and password for my Apple account and iCloud. My main email server is btinternet. When I try to share a photo by sending an email by iCloud I get a message "Server doesn't recognize username/password combination". Do I need to login to iCloud with my btinternet password?

    Seeing others with same problem I have gone into iPhoto>Preferences>Accounts and changed password to btinternet password. It worked. Thanks.

  • How do I fix my e-mail password for I-photo?  Get this message, "The email server didn't recognize your username/password combination."

    When trying to send a group of photos the e-mail requested my password.  Apparently I gave it the wrong one.  When I tried to resend, it doesn't ask for a password, just gives me this message, "The email server didn’t recognize your username/password combination."  How do I fix the problem?  I tried I-Photo help, but it says "NOT available."  I'm getting VERY frustrated since my I-Book G-4 NEVER did such "STUPID" things like ask for a password to send photos!!!  
    I tried sending single photo, but get the same message.
    Also, my e-mail is NOT @bellsouth.net.  It is @icloud.com  I tried to change it but couldn't.  How do I change it on this site.  I tried to edit my info, but couldn't change the e-mail!!
    <Email Edited by Host>

    I'm trying to email from iPhoto

  • SMTP Server set up for emailing

    Can anyone advise which BO documents sets out the procedure for setting up the job server for emailing, etc? The Admin and deployment guides talk about it, but don't specify how it's done.
    Thanks.

    CMC > servers > job server > destinations
    enable SMTP and configure the default options from there. Some information may be required from your email admin.
    Then schedule a report (that uses that job server) and select email as a destination. You will have the ability to select a specific address or use the default (configured on the job server in the 1st step). The accounts used will have to have access to send to the email SMTP server.
    Regards,
    Tim

  • Hi I need to setup my email account  on my ipad2 coz I deleted, accidentalli it ask me for a server os something like that can u help me please

    Hi I need to setup my email account  on my ipad2 coz I deleted, accidentalli it ask me for a server os something like that can u help me please

    I'm from Kuwait and there is no technical support for our hope I find a solution to have

Maybe you are looking for