GSSAPI with IMAP on Exchange 2013 SP1

We are setting up Exchange 2013 SP1 in our Exchange 2010 test environment to verify our upcoming migration. I have found out that for some reason I can't get the IMAP service in Exchange 2013 to work with Kerberos (GSSAPI) authentication with Thunderbird
as a client. It does work fine in Exchange 2010 SP3 though.
Exchange 2010 SP3 response in Thunderbird:
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
Exchange 2013 SP1 response in Thunderbird:
* CAPABILITY IMAP4 IMAP4rev1 AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
AUTH=GSSAPI is missing and therefore I can't blame Thunderbird from complaining about this. If I compare the output from Get-ImapSettings I can't find anything that would indicate why I shouldn't work. EnableGSSAPIAndNTLMAuth is $true on both server
and LoginType is SecureLogin.
On
http://technet.microsoft.com/en-us/library/jj619283(v=exchg.150).aspx I found out that NTLM is not supported on Exchange 2013 for POP3 and IMAP4 but Kerberos (GSSAPI) and Plain Text Authentication with SSL still is.
Has anyone got IMAP to work with Kerberos authentication on Exchange 2013 SP1?

Hello,
According to your description, we are unable to see the AUTH=GSSAPI in Exchange 2013.
My environment is Exchange 2013 CU1. I get the same result as yours. Looks Like Exchange 2013 IMAP does not support GSSAPI as authentication mechanism.
Cara Chen
TechNet Community Support

Similar Messages

SME 7.1 not working with Exchange 2013 SP1 CU6

Hello, i tried upgrading to SME 7.1 on our Exchange 2013 SP1 CU6, but when trying to configure the Exchange Server in the SME management console using the configuration wizard, it gave an error before the LUN mapping page, saying "Failed to get Exchange information for server" and "The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.". I upgraded Snapdrive to 7.1, verfied all credentials according to the manuals, re-installed and rebooted multiple times (registry and filesystem cleaned, even tried to rename the existing SnapInfo directory, ...), stopped all other services on the server but without any change... Every time when trying to run the configuration wizard, the debug log shows no errors, lists all Exchange information and ends with the following lines:[11/18 12:51:58 155] Exit CSmeCDOExm::GetExchangeStructureInternal 0x0
[11/18 12:51:58 155] Exit CNtapSnapMgr::GetExchangeStructure: 0x0
[11/18 12:51:58 233] Enter CSmeServerBase::~CSmeServerBase ...
[11/18 12:51:58 248] m_ptrSnapShot released
[11/18 12:51:58 248] m_pISnapShot4 released
[11/18 12:51:58 248] m_pISnapShot5 released
[11/18 12:51:58 248] m_pISnapShot6 released
[11/18 12:51:58 248] m_pISnapShot7 released
[11/18 12:51:58 248] m_pISnapShot8 released
[11/18 12:51:58 248] m_pISnapShot9 released I ended up uninstalling SME 7.1 and re-installed SME 7.0 which is working. Exchange Server: ESXi 5.5 VM, Windows Server 2012 R2 (with current patches), Exchange 2013 SP1 CU6 - no DAG, single server installation (in co-existence with Exchange 2010), 4 iSCSI LUNs created with Snapdrive (1x Log, 3x Store), System drive and Exchange installation drive on vmdk Disks (via ESXi -> NFS store on the same NetApp)NetApp: FAS 2240-2 with Data ONTAP 8.1.4P1 7-mode (with complete license bundle) Anyone else got this problem or even better - a solution?

We could not reproduce the error with the upgrade workflow.Looking at the error and the relevant function, we could force the problem in following conditions: -SME is configured or ran at the DAG level-one of the following services is stopped or not responding on one nodes of the DAG Snapdrive Service, Snapmanager Service, Snapdrive Storage Management Service,Snapdrive Management Service. Would be good if we could get the output of following powershell cmdlet before and after the upgrade: Get-Service –ComputerName Node1, Node2, Node3 –name Snap*, SDMGMT*, SWSvc Best regards,Dan

Exchange 2013 SP1 Readiness Checks: No Exchange 2007 server detected

Hi there,
We are planning to upgrade our current Exchange 2007 server with the new Exchange 2013 SP1. I have been following Exchange Server Deployment Assistant to assist me with this task. Only schema update (setup /PrepareSchema) had been done so
far. I didn’t run setup /PrepareAD command manually because I wasn’t sure if I need to provide ‘Organisation Name’ with it or not?! I have installed all of the prerequisites as noted in the Microsoft documentation.
Now, I am a bit confuse with the ‘Readiness Checks’ page during graphical user installation of Exchange 2013 SP1 setup on Windows 2012 R2. Windows 2012 R2 server has all available updates applied.
===
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
===
I get the message why setup wants to run preparation for the Ex2013 with the ‘Setup /PrepareAD’. But, why ‘No Exchange 2010 server role have been detected in this topology’?! Ok, in my case setup doesn’t detect Exchange 2007 server. Is that ok to proceed
with the installation or something else needs to be done first?
Thanks in advance.

I need Exchange guru advice here please. Since we already have Exchange 2007 SP3 RU 10 in our Windows 2008R2 Active Directory domain here I need to be 100% confident that pushing Exchange 2013 SP1 “Install” will not override our existing Ex2007 environment.
That would be a huge disaster!
Microsoft is saying that: “Microsoft Exchange Server 2013 Setup displayed this warning because
no Exchange Server 2010 or Exchange Server 2007 server roles exist in the organization.”
http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ok, I get the message about if I continue with Exchange Server 2013 installation, I won’t be able to add Exchange 2010 or Exchange 2007 servers to the organization at a future date..., and why would I need to do that anyway?!
Microsoft wording about “some solutions may require the use...” are very confusing since we will require to consider “Coexistence or migration requirements"
Perhaps, before running Exchange 2013 SP1 setup I need to run setup for preparing AD without “Organisation Name” parameter?! Something like this:
setup /PrepareAD /IAcceptExchangeServerLicenseTerms

Upgrade of Integation Services (Windows 2012 R2) on Windows 2008 R2 with Exchange 2013 SP1 DAG fails

Here is the scenario:
Legacy Host: Windows 2008 R2
Guest VM: Windows 2008 R2 with Exchange 2013 SP1 DAG cluster.
After importing the VM (2008 R2 and Exchange 2013 DAG) into a 2012 R2 host (Cluster). (copy VM files to new 2012 R2host) Everything works fine.
Then upgrading "Installation Services" (for Windows 2012 R2 host) on the imported VM runs fine with no errors to the "Restart" prompt. VM than shows: "Configuring Windows updates 32% complete. Do not turn
of your computer." Hangs there for about 20 minutes until is says "shutting down". Hangs there for 20 minutes until power off. Restart to normal start; "Preparing to configure Windows. Do not turnoff your computer." proceeds slowly
to "Configuring Windows updates 32% complete. Do not turn of your computer." hangs there again indefinite. Sometime hangs at shutdown cycle and "Configuring Windows updates 32% complete. Do not turn of your computer." indefinitely.
I moved 20 other machines from a 2008 R2 host to new Windows 2012 R2 hosts all of these machines install the 2012 R2 Integration services just fine on the 2008 R2 VM. Just the 2008 R2 VMs clustered (DAG) and Exchange 2013 SP1 do not take the Integration
Services upgrade.
Any advise from Microsoft? I know I could decommission the DAG and Exchange machines and install Integration services on the native box before Exchange and DAG and that would sure work, but I'd rather avoid that amount of work for a simple integration layer
upgrade.
Thanks
Gerhard Waterkamp ACSLA Inc.

Hi,
Could you try use the following method to fix this issue first?
1. Run the System Update Readiness Tool, then check if there is any error in the Checksur.log and checksur.persist.log.
1. Please run the System Update Readiness Tool on this affected server. Please download this tool from the following Microsoft article:
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7
http://support.microsoft.com/kb/947821/en-us
2. The System Update Readiness Tool creates the log files that captures any issues that the tool found or fixed. The log files are located at the following location:
%SYSTEMROOT%\Logs\CBS\
3. Please paste the checksur.log here for analysis.
If there is no error found, please try the following step.
==================================
2. Use Fix it tool to reset the Windows Update components.
1. Open the following link.
http://support.microsoft.com/kb/971058/en-nz
2. Select Windows 8.1, Windows 8 and Windows 7 in the product selection box.
3. Click “Run Now” to reset the Windows Update components.
Note: We can reset the Windows Updates manually by following the steps in the KB above.
3. Use the System File Checker tool to repair missing or corrupted system files
1. Open the command promote with Administrators.
2. At the command prompt, type the following command, and then press ENTER:
sfc /scannow
Any errors are found in the steps above, please let me know.
Hope this helpful.
Best Regards,
Jason Zeng
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Cannot write email body in OWA with Exchange 2013 SP1 CU6

Hi,
I have a problem with Exchange 2013 SP1 with CU6.
All of OWA user cannot write in the body of email. They can write the Object and the recipient but they cannot select body and write the body message. We have try with multiple Web brother and desactivate all Add-on but the problem still there...
The only way that works is to respond to an email, and in that case, it's working, we can write normally in the body of email.
Have you an idea ?
Thanks in advance!
Sebastien

Hi,
After contacting Microsoft support, we have found the solution.
The problem appear after we have recently install the patch described in this KB 2997209:
https://support.microsoft.com/kb/2997209?wa=wsignin1.0
But on 2013 Mailbox Server, Echange is not installed in the default path C:\ but on D:\
So we have to manually copy the content of folder D:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\Owa\prem\15.0.995.29 in the folder 15.0.995.31 (MAKE a BACKUP of FOLDER BEFORE!)
No need to reboot, or restart IIS, it's working after that!
@+
Sébastien

Exchange 2013 Sp1 Coexistence with Exchange 2010 SP3 CU5 HTTP 500

I`m trying to make working OWA coexistence between Exchange 2013 SP1 and Exchange 2010 SP3 CU5.
When user login in to OWA where his mailbox is located on Exchange 2013 server it logon successful and owa opened. When i try to login to the same url with user whose mailbox is located on Exchange 2010 server i get Error http 50
The website cannot display the page : HTTP 500 »https://URLEXCHANGE2013/owa/auth.owa«
The same is, when i use https:// URLEXCHANGE2013/ecp?ExchClientVer=14
URL on Exchange 2013 are different as fro Exchange 2010.
I even tried to setup Internal URL for Exchange 2010 to bi set to »null ,Saem error
Exchange server 2013 Sp1 is installed on Windows server 2012 R2.

Assumption is correct. I have even enable verbose logging, and i can see MSExchange Front End HTTP Proxy , that successfully connect to Exchange 2010 server.
But remember Exchange 2013 is fresh installation on Windows server 2012 R2.
IIS LOG
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=391fd8b3-2b98-494a-8812-d38feda2e5a0&cafeReqId=391fd8b3-2b98-494a-8812-d38feda2e5a0;
443 companyNT\SM_9c071c4922fd420fb fe80::99d1:f542:a4d3:b469%12 MSRPC - 200 0 0 5484
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=27cfafa2-8224-4563-918b-0b228c6ee8d4&cafeReqId=27cfafa2-8224-4563-918b-0b228c6ee8d4;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 0
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=6d930bcd-7bbc-415a-a25a-8d6488e91401&cafeReqId=6d930bcd-7bbc-415a-a25a-8d6488e91401;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 15
2014-03-04 08:52:55 10.1.0.36 GET /owa/ &CorrelationID=<empty>;&cafeReqId=551cfdd9-18ac-42d8-aea3-cbb546c9d9fb; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/
302 0 0 9937
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fOWA.company.com%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c1b97df9-ec56-4906-b2f5-965551b720ae; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
https://OWA.company.com/ 200 0 0 1015
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f&CorrelationID=<empty>;&cafeReqId=b92ca682-04f4-4d4f-931e-9a95680ab9ea; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
- 200 0 0 671
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=093bd01a-de59-4519-80f6-067484122091; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c2f7565d-ee6a-48f8-8d86-16d5d3ca65c1; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=ba633030-2376-4bad-a32f-8f160bd87bd4; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=5e94172c-d97c-46a9-a602-6030d6f7da2c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fEXCH2013%2fecp%2f&CorrelationID=<empty>;&cafeReqId=9ba2caf3-2a03-44a2-8477-2724689e139c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 46
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/15.0.847/scripts/premium/flogon.js &CorrelationID=<empty>;&cafeReqId=62bb4655-3bfa-4e07-aa62-27c93e7e8b4d; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:59 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=9d52ec1a-2ee1-4954-85e6-89e7e5df407a; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 302 0 0 812
2014-03-04 08:52:59 ::1 GET /OWA/Calendar/[email protected]/calendar/calendar.html &CorrelationID=<empty>;&cafeReqId=4ea66475-9a47-41a4-81cb-6b569715d0d6; 443 - ::1 AMProbe/Local/ClientAccess - 200 0 0 8859
2014-03-04 08:53:01 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=b3db7480-2192-436c-b01d-29d0e528cfec; 443 UseronEX2010 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f
500 0 0 187
2014-03-04 08:53:04 127.0.0.1 GET /Microsoft-Server-ActiveSync/default.eas &CorrelationID=<empty>;&cafeReqId=2e2a655b-00b9-42ae-8789-1e452e6579c3; 443 [email protected] 127.0.0.1 AMProbe/Local/ClientAccess
- 200 0 0 8265
2014-03-04 08:53:14 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=8741886f-b9b1-46f9-8c15-baf35809a12c; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 15265
2014-03-04 08:53:14 127.0.0.1 GET /OWA/auth.owa &CorrelationID=<empty>;&cafeReqId=8ad938fb-f2c3-42bf-8718-da62b122422c; 443 - 127.0.0.1 AMProbe/Local/ClientAccess - 302 0 0 15
HTTPERR LOG :
2014-03-04 08:51:48 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:51:48 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:30 127.0.0.1 14122 127.0.0.1 443 HTTP/1.1 GET /RPC/[email protected] 404 - NotFound -
2014-03-04 08:52:30 ::1%0 14121 ::1%0 443 HTTP/1.1 GET /ecp/ReportingWebService/ 404 - NotFound -
2014-03-04 08:54:42 ::1%0 14117 ::1%0 444 - - - - - Timer_ConnectionIdle -
2014-03-04 08:54:48 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:54:48 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
Trace login, ok it is xml, so print is..
-Request Summary
Site
1
Process
8232
Failure Reason
STATUS_CODE
Trigger Status
500
Final Status
500
Time Taken
500 msec
Url
http://EXCH2013.companyNT.local:80/powershell?clientApplication=ActiveMonitor;PSVersion=4.0&sessionID=Version_15.0_(Build_846.0)=rJqNiZqNgZuQkpqT0pqH0ZuQkpqTkYvRk5CcnpOBzsbLzsbGyczJyIHPzNDPy9DNz87L38/Gxc/KxcrJ
App Pool
MSExchangePowerShellFrontEndAppPool
Authentication
Kerberos
User from token
companyNT\SM_9c071c4922fd420fb
Activity ID
{8000134C-0001-E300-B63F-84710C7967BB}
-Errors & Warnings
No.↓
Severity
Event
Module Name
157. view trace
Warning
-MODULE_SET_RESPONSE_ERROR_STATUS
ModuleName
ManagedPipelineHandler
Notification
EXECUTE_REQUEST_HANDLER
HttpStatus
500
HttpReason
Request Failed
HttpSubStatus
0
ErrorCode
The operation completed successfully.
(0x0)
ConfigExceptionInfo
ManagedPipelineHandler
See all events for the request

Seemingly successful install of Exchange 2013 SP1 turns into many errors in event logs after upgrade to CU7

I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+    New-PerfCounters -DefinitionFileName $f
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
    + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
   12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible.

What happend New-MailboxExportRequest cmdlet in exchange 2013 SP1 is missing?

Cmdlet New-MailboxExportRequest is not recognize cmdlet in Exchange 2013 SP1
How can i do export mailbox to pst file in exchange 2013 SP1?

You might be facing this issue because of not having the rights to execute the New-MailboxExportRequest CMDLET.
Follow the steps given below in order to export the mailboxes into PST file
1. Open the Exchange Console and run:
New-ManagementRoleAssignment -Name "Import Export PST" -SecurityGroup "Organization Management" -Role “Mailbox Import Export"
This will generate a new role group called Import Export PST to the Oranization Management group with the role Mailbox Import Export.
You should Close and Restart the Exchange Management System again so that the changes made will get reflected in the settings, otherwise you will still get the same erroriIf not
restarted. Now move to the next steps.
2. Assign “Mailbox Import Export” role to it.
3. Add Desired Users to Role Group
4. Create Network Share ( Exchange Trusted Subsystem group has read/write permission to NTFS Permissions)
5. Run PS New-MailboxExportRequest
6. Monitor New-MailboxExportRequest
Verify PST File has been created on the network Share and you are done.
If you get the same error again, then there will be some hardware or software issues due to which you are not able to export mailboxes into PST files. In that case, you can make
use of any third party tool like Stellar Phoenix EDB To PST converter, which will help you to export your exchange database files to PST files easily and quickly. You can try this software by downloading its demo directly from their site http://www.stellarinfo.com/email-repair/edb-pst-converter.php

Error while adding member to the dag in exchange 2013 sp1

I have Windows Server 2012 Std Edition with Exchange 2013 SP1 and get the following error while adding member to the dag either i do it using EAC or the powershell
Senior Technical Consultant, MDS Computers

When running set-databaseavailabilitygroup Exchange-dag without parameters, it crashes again:
[PS] C:\Windows\system32>Set-DatabaseAvailabilityGroup exchange-dag
WARNING: An unexpected error has occurred and a Watson dump is being generated: Some or all identity references could not be translated. Some or all identity references could not be translated.
+ CategoryInfo : NotSpecified: (:) [Set-DatabaseAvailabilityGroup], IdentityNotMappedException
+ FullyQualifiedErrorId : System.Security.Principal.IdentityNotMappedException,Microsoft.Exchange.Management.Syste
mConfigurationTasks.SetDatabaseAvailabilityGroup
+ PSComputerName : <server>
Also, this is logged in the eventlog:
Watson report about to be sent for process id: 7424, with parameters: E12, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangePowerShellAppPool, M.Exchange.Management, M.E.M.C.FileShareWitness.Create, S.S.Principal.IdentityNotMappedException, 3e5c, 15.00.0847.031.
ErrorReportingEnabled: True
Definitely looks like a problem creating the filewitness share.
Frank.

Exchange 2013 SP1 setup fails at prerequisite Analysis

I installed a completely new server network with Hyper-v 2012R2
I installed two virtual 2012R2 servers: DC01 as the Domain Controller of "testdomain.local" and EX01 as the Exchange server.
EX01 is joined the domain "testdomain" from DC01
I log in on EX01 with an in AD created testdomain\exadmin account who is member of domain admins, enterprise admins, schema admins, administrators and group policy creator owners.
I have run the command Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience,
NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing,
Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression,
Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation, Telnet-Client, RSAT-ADDS
on EX01
I have installed the Microsoft Unified Communications Managed API 4.0
Then I run the Exchange 2013 SP1 setup and the prerequisite check gives the following errors:
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Active Directory server is not available. Error message: Active directory response: The LDAP server is unavailable. See the Exchange setup log for more information on this
error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
I can connect with the Active Directory Sites and Domains and other applets to the AD. So Why these errors???
HELP!
Regards, Manu
Manu van Winkel

Hi, thanks for the answer.
I restarted the server and did the "run as administrator": same result.
The first errormessage in the exchangesetup.log is:
[ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server is not available. Error message: Active directory response: The LDAP server is unavailable. See the Exchange setup log for more information
on this error.
When I run dcdiag /s:DC01 from EX01 it passes all tests except:
DFSREvent "The RPC server is unavailable"
KccEvent "The RPC server is unavailable."
SystemLog "The RPC server is unavailable."
Could these be of any influence?
Running dcdiag on DC01 passes all tests.
The only thing I changed after setting up DC01, was changing the fixed IP-adres from 192.168.25.3 to 192.168.25.2, but I ran ipconfig /flushdns and ipconfig /registerdns and dcdiag /fix afterwards.
The only roles installed on DC01 are AD DS (I tried installing exchange before and after adding the AD DS role), AD, DNS, DHCP and Fileservices
I don't know where to look anymore....
Manu van Winkel

Exchange 2013 SP1 Installation Errors I Cannot Resolve

Good Afternoon All -
Note: I updated this post an hour after posting. Still no solution, but please see updated info at end of this post)
I'm trying to introduce Exchange into an existing, small environment. The server I'm trying to install it onto is an SBS 2011 server (single server.) Even though SBS comes with Exchange, I found out that it's installation was corrupted and someone
had attempted to uninstall it before. Yes, it's being installed onto a server with a DC. I considered creating a Hyper-V VM on the server for Exchange, but thought it may be better to try to install directly onto server instead.
Before I started, I made sure all Exchange data had been removed. I checked for and deleted (if present) all Exchange-related objects in ADSI, ADU&C, files, and registry entries.
When I try to install Exchange 2013 SP1, I get the below errors. I know that some are easily resolved by installing pre-requisites - however - others aren't - especially the pending reboot one. I've restarted the server many times when making
changes or applying various updates and still get flagged to restart during installation. I've tried the SBS 2011 repair disc as well, but had many issues with it. In all honesty, the whole server needs to be wiped and re-installed, but
cannot do at this point.
Besides the errors below, I've zipped up the ExchangeSetupLogs folder and placed them in the link below. Also below are system specs. The only edit I made in them is a find/replace for server and domain name.
ExchangeSetupLogs Folder
System Specs
Xeon E31270 3.4Ghz
16gb RAM
Windows Server 2011 SBS x64 (Domain Controller Role Installed & Used)
C:\ - RAID 1 = 500gb
D:\ - SATA HDD = 320gb
E:\ - SATA HDD = 320GB
Should I perhaps try to install to a VM on the server or think that would use too many unnecessary resources?
Any help would be appreciated - Thanks!
Error:
This computer requires the update described in Microsoft Knowledge Base article KB2619234 (http://go.microsoft.com/fwlink/?LinkId=262359).
Without this update, the Outlook Anywhere feature may not work reliably.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.Win7RpcHttpAssocCookieGuidUpdateNotInstalled.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then
run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
The Windows component RSAT-Clustering isn't installed on this computer and needs to be installed before Exchange Setup can begin.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RsatClusteringInstalled.aspx
Error:
This computer requires the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit. Please install the software from
http://go.microsoft.com/fwlink/?LinkId=260990.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UcmaRedistMsi.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ben K.
UPDATE
I just tried fixing a few things and tried again. Still no luck. Below is what I changed as well as the errors received. Only option was Retry. Can I just not install it onto this environment?
What I Changed
Installed Unified Comm Managed API 4.0 (Required Uninstalling Speech Analysis app before it would install)
Installed KB2619234 for Outlook Anywhere
Installed 12 updates - Server fully patched
Exchange Setup Errors
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Thanks Guys -

Hi,
Agree. Windows Server 2011 SBS x64 can be the problem.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange 2013 SP1 | Another HTTP 500.0.0 Error

Help!
We are in the middle of migrating from Exchange 2010 SP3 to Exchange 2013 SP1 and we are being plagued with HTTP 500 errors on every Exchange 2013 server now.
I have two Client Access servers installed (EXCHFE01 & EXCHFE02) and one backend mailbox server (EXCHMB03) with the Client Access role also installed (for troubleshooting purposes). Once I get everything working I'll install two backend 2013 servers
with the mailbox role only for production (load-balanced, clustered, etc). I still have two Exchange 2010 mailbox servers left since one has a single large mailbox left on it and the other hosts public folders. I'll get to migrating those later. All Exchange
2013 servers are running Windows Server 2012. All are on the same LAN and no firewalls are between them.
On all three 2013 servers (EXCHFE01, EXCHFE02, EXCHMB03) I'm getting the dreaded HTTP 500 error whether I try to get to OWA or ECP. This did work at one point where I could at least login to the mailbox server (EXCHMB03) and migrate all my mailboxes over
to it. Sometime this morning after the two Client Access servers were installed the mailbox server stopped working (HTTP 500 errors). This is very frustrating because I can't even login to a console to manage Exchange from any server at this point.
Both Client Access servers aren't really showing anything of value in the event logs or the IIS logs. The mailbox server (EXCHMB03) does show the following event 3002:
Protocol /Microsoft-Server-ActiveSync failed to process request from identity NT AUTHORITY\SYSTEM. Exception: Microsoft.Exchange.Security.Authentication.BackendRehydrationException: Rehydration failed. Reason: Source server 'NT AUTHORITY\SYSTEM' does not have token serialization permission.
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.ProcessRequest(HttpContext httpContext)
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.OnAuthenticateRequest(Object source, EventArgs args).
...and I get the following when I run the Exchange Management Shell tool on the same mailbox server (along with lots of other red HTML text):
More Information:
This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
The Client Access servers show the following errors:
Performance counter updating error. Counter name is Location cache update time, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 4040 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
888 svchost
264 smss
532 conhost
2576 Microsoft.Exchange.UM.CallRouter
1596 WMSvc
3932 dllhost
4020 svchost
2308 dwm
5060 taskhostex
844 svchost
1972 Microsoft.Exchange.Directory.TopologyService
1228 inetinfo
1316 vmtoolsd
3896 svchost
780 svchost
1580 rundll32
1668 mqsvc
816 dwm
3840 slui
3532 rdpclip
3980 WmiPrvSE
4200 SppExtComObj
4288 winlogon
2140 SMSvcHost
676 svchost
1564 svchost
1296 Microsoft.Exchange.Diagnostics.Service
1472 Microsoft.Exchange.ServiceHost
1204 svchost
1292 ServerManagerLauncher
488 winlogon
664 svchost
572 lsass
3236 dllhost
2972 WmiPrvSE
4484 w3wp
388 csrss
1600 rundll32
564 services
1260 msdtc
5032 sppsvc
1448 MSExchangeHMHost
824 LogonUI
4204 VSSVC
2524 userinit
2700 MSExchangeFrontendTransport
1708 SMSvcHost
728 svchost
460 wininit
904 svchost
992 svchost
4996 TSTheme
4240 slui
4904 taskhost
452 csrss
4340 csrss
4 System
1164 spoolsv
1988 slClient
2760 MSExchangeHMWorker
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
... and...
A transient failure has occurred. The problem may resolve itself. Diagnostic information:
Microsoft.Exchange.Data.DataSourceOperationException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
--- End of inner exception stack trace ---
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalFindFolders(IEnumerable`1 parentFolderIds, SearchFilter searchFilter, FolderView view, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindFolders(FolderId parentFolderId, SearchFilter searchFilter, FolderView view)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.GetOrCreateFolderCore(String folderName, FolderId parentFolder, Func`1 creator)
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.GetDefaultFolder()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<>c__DisplayClass1b`1.<InternalFindPaged>b__13()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<InternalFindPaged>d__21`1.MoveNext()
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.<GetNotificationDetails>d__4.MoveNext()
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.RemoveAllNotification()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.UpdateDataInMbx(List`1 certificates)
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.Work()
I've tried all sorts of recommended fixes but none have worked so far:
ADSIEdit and remove msExchCanaryData0 data
Reinstall Exchange multiple times
Rebooted multiple times
This article: http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
Rebooted DCs multiple times (no exchange servers are DCs)
I'm sure I've left out a few troubleshooting steps since I've been working at this for two days. Can anybody offer any advice? I'm at my wits end here...

Hi,
Please check whether the mail.mydomain.com is pointed to your Exchange 2010 or Exchange 2013. Please run the following command to check your OWA virtual directores and ECP virtual directories:
Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
In IIS manager > Default Web Site, please make sure Anonymous Authentication is Enabled in Authentication. Confirm that "Require SSL" is checked on the SSL Settings of the default web site.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2013 SP1 Object is corrupted and inconsistent state after Lync 2013 Installation

Hi Fellows,
I am facing an issue with Exchange 2013 SP1 (5.0.847.32)
environment. I recently installed Lync 2013 (version: 5.0.8308.0) a week ago and just recently start getting the below error when configuring delegation or modifying the users/groups from Exchange Control Panel:
"The Object <object DN> has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control defines the ObjectType <object guid> that can't be resolved.."
I can see some forum threads with same issue (links given below) but unable to find if this is a known issue and how to get it resolved. Need assistance if anyone has faced same and could help me out to figure it.
http://social.technet.microsoft.com/Forums/exchange/en-US/72310530-d1de-4b39-a0fb-1592247df03f/access-control-entry-issue-after-installing-lync-2013-into-the-forest?forum=exchangesvrdeploy
http://www.networksteve.com/exchange/topic.php/Issue_with_exchange_2013_lync_2013_intergration/?TopicId=37192&Posts=2
J.A

Hi
Usually the affected SID objects are referring to deleted objects.
Use the PsGetSid tool to try to resolve them.

Exchange 2013 SP1 readiness check failing

Trying to install our first Exchange 2013 SP1 server on Windows 2012 R2 in our datacentre, the readiness check fails with:
Error:
The Active Directory schema isn't up-to-date, and this user account isn't a member of the 'Schema Admins' and/or 'Enterprise Admins' groups.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.SchemaUpdateRequired.aspx
There are many more errors relating to Enterprise admin rights etc.
Please note that:
My account is Domain admin, Schema admin and Enterprise admin member, it always has been.
I tried the built-in AD Administrator which of course is part of the groups as well, no difference.
Active Directory is at 2008 R2 for domain and forest functional levels.
I tried rejoining the new Exchange designated server to the domain
I've installed RSAT-ADDS, the Managed API 4.0 and all the other windows roles via powershell
There is a local domain controller that is a global catalog server on the new Exchange server subnet
I tried running the Exchange Setup on a different server on the same subnet as where the active 2010 Exchange server resides as well as the FSMO AD role holder resides, this works fine. I even did the AD prep from there no problem, that made no difference
on the datacentre server
AD replicates fine between the FSMO role holder and the Datacentre (no errors in dcdiag or repadmin /showrepl)
This error is in the event log:
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetupUI.exe
6724
Get Servers for domain.local
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0475315. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table

So I decided to re-install the OS, worked perfectly now. Only difference from before would be:
SCCM hasn't pushed SCEP 2012 to the new build of the same server yet
The original server was installed in a different AD site and then it was physically mode and reassigned to an new AD site and subnet
I might have installed the pre-reqs in a slightly different order (RSAT-ADDS, all the IIS etc things via powershell
and then the UCM API 4.0. (saw few comments that the order of how you install them matters in other forums).
10 or so Microsoft Windows updates haven't installed on the new OS build yet.
Other than that, its identical. But if its not broken don't fix it, perhaps the above can help someone else though.

Exchange 2013 SP1 RU4 Public Folder Permissions

Hi All,
Exchange 2013 SP1 RU4 Public Folder Permissions
We have a weird problem after migrating our PF from Exchange 2010 to 2013.
Users do not have permission to create or delete in PF even thou they have owner permissions.
Example:-
I have created a '\test1' folder in the root which has the following permissions (this works OK):-
Myself - Owner
Default - Author
Anonymous - None
I have created another folder '\admin\test2' folder which has the same permissions as above but i get the "cannot create the folder. you don't have appropriate permissions to perform this operation"
I get this problem across all of the folders that were migrated. clean folders created at the root with the correct permission function as per expected.
Regards
Paul Sheldon

Hi,
I recommend you use the Get-PublicFolderClientPermission -Identity publicfolder command to check the client access permissions to a public folder.
If possible, please remove permission and re-add permission to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

GSSAPI with IMAP on Exchange 2013 SP1

Similar Messages

Maybe you are looking for