GT 735 - audio via headphone is crap!

...let me start by saying that the sound capabilities of my GT735 are FREAKING AWESOME on it's own.  The speaker system is totally unreal...I would never have imagined that a laptop could produce sound this good.
...but then yesterday, for the first time ever, I plugged in a set of headphones to listen to music in the office.  And it was *shite*.  Have to keep the volume very low to keep it from cracking like mad, and no bass is provided at all.  It was the WORST sound I had ever heard from a laptop.  And I was using really good headphones - tried 2 sets, actually, both of which are incredibly good with other laptops/PCs/whatever.  The problem definitely is the GT735 itself.
...anybody else experience this?  I'm running Vista 64-bit, using the drivers from the MSI website.  I am shocked, shocked I say, at how abysmally bad the sound via headphone is.  I am *this* close to having to either buy an expresscard sound card so I can use headphones, or just accept the fact that I can never use headphones.

Quote from: Bas on 28-February-09, 03:41:38
Did you tell Vista you where using headphones?
I selected headphones in WMP...not that it made any difference.  I'm wondering if maybe the headphone jack is wonky itself...

Similar Messages

  • Audio via headphone jack is really low

    The sound from internal speakers is fine, but audio via the headphone jack is really low.

    Hi Krich918,
    Your computer can tell when you have something plugged into the headphone port, and it remembers a separate volume profile for each (internal speakers vs. headphones). You may want to double check that the volume is up on the Sound preference pane in System Preferences when you have your headphones plugged in, as outlined in the following article (apologies if you have already done so):
    Mac Basics: Set your preferences
    http://support.apple.com/kb/ht2490
    Regards,
    - Brenden

  • Cannot output audio via headphone jacks with Mac Mini (2012) and Boot Camp

    Hi all,
    I have a brand new (2012) Mac Mini with a Boot Camp partition running Windows 7.  It's connected directly to an HDTV via HDMI cable.  I have external speakers hooked through the headphone jack on the back.  The speakers work fine if I'm in the Mac environment, but I cannot get the audio output to go through the headphone jack while in Boot Camp/Windows- it will only go through the speakers on the TV.  Any suggestions?  I think I've downloaded every driver I can think of, and the installation of Windows on the Boot Camp partition went well otherwise.  Thanks.
    John

    Nevermind, I was missing one driver.  Installed it, fixed.

  • No audio via headphone socket - Mac Mini

    2010 Mac Mini 10.6.8
    No output via the headphone jack. Audio is working OK via internal speaker / HDMI / Bluetooth / Airplay.
    There is a signal going through the socket and cable as noise can be heard (squeal, squeaks, etc, but not a distinguishable output)
    1) Disconnected all USB's etc
    2) Rebooted with different cables for audio and HDMI
    3) Reset PRAM
    4) Apple Hardware Test - all OK
    5) Tech Tool Test - all OK
    6) Checked all setting in Audio Midi/sound preferences
    Any ideas? - Thanks

    Trip to Apple store and Genius Bar (Genius my a**e!), where I had a 2 hour wait, 20 minutes with the Genius (I use the term lightly) to be told what I already knew, plus he thinks the headphone output is connected to main logic board and that will cost almost £300 for parts. Dream-on!
    On the way home I purchased a £8 Toslink cable (same was £32 in Apple store) plugged it in and hey presto - perfect sound.
    So it looks like the headphone socket is stuck in digital mode.
    Well at least it's a marginal improvement. Now off to research & establish how many other folks report same issue.

  • Is there a way to play video through HDMI and have the audio via the headphone socket?

    I would like to be able to play movies through the HDMI adapter to a projector, but to have the audio via the headphone socket to a separate audio system.  What I find is that as soon as I connect the projector via HDMI, the audio via the headphone sockeet is cut off.  Any ideas?

    Yes, there is a very simple way to get audio out through the iPad headphone jack even while connected to HDMI to play movies on a projector or TV.  In fact, I just did it last night for a presentation.
    With the HDMI adapter connected to the projector and your audio jack plugged into your iPad headphone jack, go ahead and start the movie. Then simply unplug the headphone jack and plug it back in.  The audio is now routed through the headphone jack again.
    I found I only had to do this once per session.  That is, Iwas able to stop the movie, go to the beginning of my presentation, wait the 20 minutes for the meeting to begin, and when I got to the video clip the audio still played out through the headphone jack to the PA system.
    I had built a presentation in a Web oriented training tool and it was running on Safari iOS7 with the latest update.  I have not tried it with Keynote yet.
    iPad mini (original version)

  • Does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack? (is there a reason to export audio via optical jack then to an external DAC?

    does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack?  If so, is there a reason to export audio via optical jack then to an external DAC then to stereo?

    My suggestion to work around this problem would be to hook up an Airport Express. The AE also has an optical out the same as your iMac. As long as your wireless connection is robust enough you should be able to stream from your iMac to your AE and then have the optical cable connect between your AE and your DAC, which then connects to your Integrated Amp/Receiver/Pre-Amp (depending on your system configuration).
    I assume because you are using the optical out and connecting to an external DAC that you are looking for a high level of Audio quality ?

  • Bad sound quality streaming audio via Airport Express

    I am streaming audio from iPhone to Apple Airport Express (Airplay). Via optical cable the signal goes to Cambridge DacMagic and then to Stereo Amplifier. Sound is not good, there's some kind of 'chattering'.
    When using AirFoil instead of Airplay sound is much better, but then gaps appear from time to time.
    Please tell me, what can be the reason for it? And how to solve?
    Thanks in advance.

    Mr. Tessarex,
    I use the Airport Exreme as router and Airport Express (2011, direct plug-in model)
    Some facts I learned from the Airport-app on my iPhone:
    Wireless clients from Airport Extreme:
    iPhone 150Mb/s (802.11 a/n) connection: excellent
    Acer laptop 144Mb/s (802.11 b/g/n) connection: excellent
    The Airport Express:
    240Mb/s (802.11 a/n) connection: good
    I bought the song "Love Me Like You Do" (Ellie Goulding) via iTunes.
    As you adviced me I tried to play it via iTunes, and streamed it from iPhone to Airport Express.
    Especially listening to the bombastic part of the song (from 3:14). Sound was tolerable.
    Playing the song from iPhone via Spotify: sound is awfull, totally overloaded.
    Playing the song from laptop via Spotify (Airfoil): sound is good.
    Playing the song from laptop via iTunes (Airplay): sound is good.
    The song never plays 'Excellent' in any way. I Think the song was recorded 'over the top'.
    Even when you listen to it via headphone, it sounds very messy, "on the edge...".
    I am happy that most songs sound good. So far playing Spotify via laptop and Airfoil gives the best results.
    According to the figures from the Airport-app, it seems I will never get optimal bitrate with my current system.
    As amplifier I use the Luxman L505u, usually connected tot Airport Express via Cambridge Dacmagic,
    but during testing via normal analog cable (without Dacmagic). So far I think the Dagmagic is not the problem.
    What do you think, after reading my story?
    Thanks in advance
    Peter

  • Distorted audio from headphone socket after iOS 5 update!

    Hi,
    I have an iPad2, and just yesterday updated my iOS to version 5.1.
    Everything went fine until I checked some audio via my headphone socket this morning. It was grossly overdistorted. I used another pair of headphones and the same thing happened, it either didn't work or cut out, or was grossly distorted. I then checked each headphones and found they worked well on my iPhone.
    So is this a problem with the software or my iPad? Anyone have an idea? I don't want to pay for repair if this is an update issue.
    Thanks
    M

    Thank you for that suggestion, but it didn't work. I still get distorted, broken up audio.
    Any other suggestions?
    Thanks,
    M

  • No audio via Mini-DisplayPort. MBP 5,5

    Hello,
    I have the MBP 5,5 and I am trying to connect it to my TV via the Mini-DisplayPort HDMI adpater.
    I am getting video but not audio any idea?
    Any help is appreciated.
    Thanks,

    farazthambi wrote:
    I have the MBP 5,5 and I am trying to connect it to my TV via the Mini-DisplayPort HDMI adpater.
    I am getting video but not audio any idea?
    A 2009 MBP does not support audio via the minidisplay port.  For audio you will have to tap the audio output port and use RCA connectors to the audio inputs on the TV.
    Ciao.

  • Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.01 Updates on Iphone 4?

    Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
    I have tried the following all ready:
    Resetting Phone
    Resetting Settings on phone
    Change Headsets to speakers
    Reinstalled Phone
    Updated to IOS 7.1
    No of the above has resolved the issue does anyone have any ideas?

    Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
    I have tried the following all ready:
    Resetting Phone
    Resetting Settings on phone
    Change Headsets to speakers
    Reinstalled Phone
    Updated to IOS 7.1
    No of the above has resolved the issue does anyone have any ideas?

  • Can MacBook Pro output digital audio via usb?

    I'd like to output digital audio via usb. Can it be done from iTunes? This would allow me to go directly to my dac and then to my preamp.
    Thanks.

    Russell, there are quite a variety of devices that accept digital audio over USB from any mac with a USB port - see http://www.trendsaudio.com/EN/Product/USBAudiodesc.htm for one example.
    Try a google on MAC USB Audio OUTPUT any you should pop up some useful options.
    Cheers
    Rod
    Message was edited by: Rod Hagen

  • My iPad can play only 1 speaker via headphone jack after iOS7

    My iPad 4 can used headphone or speaker via headphone jack in very good condition until I upgrade iOS7.
    Now the sound come out only 1 side, another is nothing.
    I test it with my earpod and speaker, both are the same.

    Same. I belive you posted about this in my thread. This is really frustrating!

  • HT1386 Syncing works but can't hear audio with headphones.

    Syncing works but can't hear audio with headphones.  Works without headphones though.

    Have you tried other headphones?
    What does syncing have to do with the problem?
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price

  • Need help to transfer 5.1 audio via hdmi

    Hi, guys!
    This is my first post, I would like to apologize for my bad english.
    Today I received my new Mini DP to HDMI adapter and, after a little configuration, I was able to make it work properly with my mac.
    But, after all my work, I noticed that the audio transfered was only stereo, not 5.1 as my home theater can handle.
    So I searched some forums for a bit and noticed that I could try to change my configurations in "audio and midi configurations" (this is a portuguese translation, I'm not sure how is the program's name in english). Once there, I saw a lot of choices for audio via hdmi, like stereo, 5.1, 6.1 etc, but only the first was availabe, all mutichannels were disabled.
    Is there any way to make these choices available?
    Can this be a limitation of my Mini DP to HDMI adapter?
    In the item description, it says that it does transfers "uncompressed audio such as LPCM" and
    "compressed audio such as DTS Digital, Dolby Digital(including DTS-HD and Dolby True HD)".
    Thanks in advance!
    Cheers from Brazil

    As far as I know there is no way to carry more than stereo over HDMI.
    I know very little about this subject and have no experience with it myself, but I've been aware for some time of this adapter:
    http://kanexlive.com/products/iAdapt51.html
    I take the description to mean that 5.1-channel digital audio can be carried by HDMI, and if the mini-Displayport doesn't output an audio signal that rich, the Kanex adapter should be a useful alternative. I've posted the link in reply to many queries in the past, but I don't recall whether or not anyone has posted back to say they've tried the adapter and tell how well it worked for them.

  • After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

    After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

Maybe you are looking for

  • PI 7.11 - Alert creation for RFC Exceptions does not work

    Hi folks! In our PI 7.11 SP04 system we have created an Alert Category as well as an Alert Rule to be informed about errorneous messages in the Integration Engine (ABAP). The scenario is synchronous SOAP Axis to sRFC, where the RFC answers with an ex

  • IPod touch promotion

    So a few months back I purchased a new 17" Mac Book Pro through the online apple store because I needed a computer for school. At the time there was a promotion through apple that promised with any purchase of a laptop for school, the buyer would rec

  • How to capture the user activities in Project Server 2010

    Hi I want  to capture the user activities from Project Server 2010 like when a user has saved and published etc. Is there any possibility that we can get the user activities data from sql server. Please throw some light on the same. Thanks Geeth If y

  • Knowing remaining space in a pdf

    I need to know how many lines are empty in a pdf file that my program is creating. The idea is that I read some data from a file. The amount of data is everytime different, varying from one page to twenty. I build a pdf file with this data and also i

  • How to migrate util.concurrent PooledExecutor|ThreadPoolExecutor.workerDone

    The PooledExecutor of the old util.concurrent framework had a method    * Cleanup method called upon termination of worker thread.   protected synchronized void workerDone(Worker w) { ...  }In the new ThreadPoolExecutor this method is private. In my