GT60-0NC SSD not detect in AHCI mode using sata3 port

GT60-0NC not detect my SSD in sata3 port using AHCI mode.
Using Kingston SSDnow V 300 120Gb
Test ok when setting to IDE mode or RAID mode.
Anyone know to resolve this problem.

resolved after changing to Plextor M5S SSD

Similar Messages

Fire X2250 / Hard disks not detected in AHCI mode

we have two Sun Fire X2250 servers. one i have completely setup already with an OS, using AHCI mode for the hard disks in the BIOS.
on the second server, i setup the disks the same way using AHCI. the system booted and detected all of the disks, and i installed an OS. now, after rebooting, the disks are not detected; the BIOS is stuck on 'detecting SATA channel 0'. if i remove the drive on SATA0, then the BIOS gets stuck on 'detecting SATA channel 1'. the BIOS isn't frozen, because i have left it waiting for several minutes, then pushed F2 and i saw it changed to "Entering setup..." i can never get to setup, though, because the disks are never detected. if i unplug both HDD's, then i can get into BIOS setup. i have tried loading failsafe as well as optimal defaults. this resets it back to IDE mode, and the disks are detected fine but, as soon as i change to AHCI mode, the BIOS can't detect the disks. again, the other X2250 is working just fine with AHCI. these servers are practically brand-new (have been sitting in storage for some time) and this is the first time they have been configured.
i also tried removing power from the server for at least 2 minutes, and i also took out the battery for well over 30+ seconds. the strange thing is, that doesn't seem to have cleared the CMOS because, as soon as the BIOS comes up, it is still stuck 'detecting SATA channel 0' whereas i would have expected it to be reset to IDE mode and detect the disk.
what's happened?

i was finally able to clear the CMOS by powering up the system with the battery removed. disks are detected fine but, as soon as i change to AHCI mode (leaving everything else as it is), the BIOS still freezes at "Auto-detecting SATA PORT 0".
i compared the BIOS settings with the working X2250 and copied them over exactly, but still the issue remains. is some piece of hardware failing?

SATA DVD Writer not detected when AHCI mode is selected in BIOS

I just finished setup my rig and I can't get the motherboard to detect the Sony SATA DVD Writer (connected to 1 of the ICH9R ports) in AHCI mode. As soon as I switch to IDE mode everything is fine. I have tried changing the delay in the AHCI menu but it doesn't help.

Which BIOS version are you using, with BIOS 1.4 & 1.6 I have had no problems running my liteon SATA in AHCI in P35 Platinum (same PCB as yours), it is known that some optical drives don't like AHCI. If you havent already I would suggest trying one of the BIOS versions I have used that should tell us if it is the BIOS or the drive.

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

HP 8530w - SSD not detected

Hello,
Recently I managed to get an SSD from work, namely the A-Data S596 (500 SERIES).
When putting it into my HP Elitebook 8530w, the disk was not detected.
I have already upgraded the BIOS to the newest version.
The SSD's firmware has also recently been upgraded to the newest.
After some googling, I read the device mode could matter.
The disk was not detected using AHCI, IDE or RAID.
Any other ideas to make it work?
Thank you in advance.

Same problem here with a Samsung SSD (MMCRE28G8MXP, Lenovo OEM). The disk works fine in three other devices but is not detected by the 8530w BIOS. The BIOS and SSD firmware are current and the SATA Device Mode setting has no effect. I was wondering whether there might be a tool to set the mode of the SSD but couldn't find anything.
Any ideas??

GT60 0NC SSD running SATA II

Hello everyone,
I have a MSI GT60 0NC and I upgraded it with a SSD samsung 840 250Go.
First, it was running 3Gb/s instead of 6Gb/s so I looked for a solution and I applied the lpm-fix. Great, it was running 6Gb/s !!!
BUT it works only when I restart my computer. If I restart it another time it is not working anymore, still goes back to 3Gb/s !!!
Does anyone have an idea / solution ?
Thank in advance for your replies
Haazell

Welcome to the "Samsung 840 drives don't work at SATA III speeds" club, that so many other users have joined. Has something to do with the Intel chipset drivers. Remove the Intel chipset drivers and use the MS AHCI driver instead, and you should get SATA III speeds constantly. Unfortunately, you probably lose out on a number of the Intel driver improvements. Such is the life of speed.

External SSD not detected!

Hi,
I'm running Mac OS X Lion (latest version) on a MacBook Pro mid-2010 model. OS X Lion was installed via recovery tools a few days ago.
Today I plugged in a brand new Crucial M4 SSD via USB and it got detected. I restarted the laptop in recovery mode using cmd + R and chose to install Lion on the external SSD. For this I first had to partition the SSD before it showed up as a valid drive where Lion could be installed.
The installation went almost to the end, but then stopped rather strangely for a very long time. So I decided to cancel the installation and restarted the laptop normally. Since then the Crucial M4 SSD is not being detected at all (doesn't even show up in Disk Utility).
Can anyone help me here? What can I do to make it show up?
Thanks in advance.

Hi,
Thanks. But I don't have access to another computer or another enclosure. The enclosure I have has an in-built USB cable.
The SSD DID get recognised and I almost installed Lion on it completely, but then what I said above happened.
Is there any other alternative?
Cheers.

TRIM not working despite AHCI mode and fsutil behavior query disabledeletenotify returning 0

Hi,
I recently changed my mobo, from a Gigabyte to an ASRock X79 Extreme9.
After doing so, being sure the new one is set up to be in AHCI mode, and updating the drivers of an existing Win 7 x64 installation using the provided DVD by ASRock, I used trimcheck-0.7.exe to check if trim was working, and it's not. Trim was working with
the Gigabyte mobo.
I made sure also that HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci and HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV start value was 0, to no avail.
The Device Manager shows that my 2 SSDs use an SCSI driver, which might be the source of the problem. I tried to update the driver automatically there, but Windows kept the ones existing, saying it could not find better.
Then, I tried to remove the Intel RST component, and reboot, but it did not help.
Any help would be greatly appreciated.

Hi,
Regarding to the TRIM capability and AHCI mode, I would like to share the following link with you, please see the reply posted by koitsu,
https://communities.intel.com/message/76399
This is hardware configuration question, not a Windows question, you will be well answered by your manufacture of the motherboard and ssd.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft does not control these
sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Ipad 2 not detected in recovery mode on my ASUS Windows 7 laptop

I have had this issue on all my idevices since I got this laptop, so this isn't directly associated with the new update.
I can sync my idevices with itunes on my laptop without any issues, but every time I try to install an iOS update, when it get to the stage where it is "preparing to restore your device" or some such, the laptop installs a new device driver and then itunes just spins awhile until it finally spits out error 1601 and then the device is stuck on the screen where it prompts you to connect to itunes.
At this point itunes on my laptop will not detect the device. I can see it listed in my device manager and it claims the usb driver is working correctly, however it no longer makes the beeping sound when I plug or unplug the cable, though it does disappear and reappear in device manager, which indicates it recognizes ipad plugged in, but not in the same way.
I have tried all the advice on the apple website re: unintalling reinstalling itunes an all it's components, disabling antivrus, firewall and non essential services, removing usb devices etc to no avail.
If I take my device over to my parents 32 bit vista desktop it recognizes it, installs the driver and itunes recognizes an ipad in recovery mode and I was able to restore the software and update to the new iOS on that desktop, then had to bring it back to my laptop to restore the software from my last backup.
My first question is....when the new ios is being installed is it putting the device into recovery mode as part of the process or is it going into recovery mode because the process errors out? If it's the former, then my assumption is that the whole issue is that for some reason something on my laptop is stopping itunes from being able to recognize my ipad while in recovery mode. If the later, then ?
My second question is....is the problem the driver, the usb port or something else unique to the laptop? I tried uninstalling and reinstalling the driver, but if i let winows detect it after uninstalling it can't find a driver and i get the exclamation point. If i try to manually install per the apple instructions, it tells me that the driver file is not compatiable with my device. So either windows is somehow installing the wrong driver while device is in recovery or the comp isn't detecting what type of device it is properly or ?
I'm hoping maybe i can get the next os update over the cloud and this will become a non-issue, but having to go borrow a pc to update this thing gets really old as the laptop is my only computer, so any ideas would be appreciated.
Laptop is an ASUS ROG - not sure the exact model running 64 bit Windows 7 It has two usb ports and i have the same issue on either one.
The PC i successfully updated my device on is an older Dell running a 32 bit version of Vista

Hopefully this will help you. Try placing your iPad in recovery mode again. You may have to try this a few times.
iOS: Unable to update or restore

TM - External Disk Drive Not Detected in Recovery Mode

Hello Apple Lovers,
I am using the My Passport for Mac 500GB disk drive with time machine on my MacBook Air to create data backups.
I checked the disk for any corruption using Disk Utility. No issues were found. I find the disk works excellantly in terms of creating backups and restoring them inside time machine.
I cannot detect my external disk for restoring entire images of the OSx in recovery mode. For some reason, TM will not detect my backup disk in the recovery mode. I use the WD Security software on my disk to lock it, however, never before has the security lock posed any problem to me. I used to see a prompt appear for me to unlock the drive in recovery mode on attempting to access the TM backups.
Please take your time in replying to my post. I recovered my entire system last week and restored all the data using TM's twlight view. No rush! I successfully created a backup of my fresh OSx Mavericks on the MacBook Air with all the data restored using TM. I only wanted to troubleshoot this issue in case something occurs in the future that may require me to restore data using TM in recovery mode.
I browsed extensively through many of the discussions covering Time Machine. None mentioned my particular dilemma. Any assistance would be a valuable controbution not only to me, but other Apple users who may purchase My Passport for Mac drives and encounter a similiar problem.

megaram wrote:
I use the WD Security software on my disk to lock it, however, never before has the security lock posed any problem to me. I used to see a prompt appear for me to unlock the drive in recovery mode on attempting to access the TM backups.
You will need to avoid using third party software if you hope to access the disk and data in recovery mode.
If the WD software encrypts your data recovery mode will need a way to decrypt it. Recovery mode is a 'reduced mode' that only runs Apple software (not third party software) so the WD drivers that decrypt the disk will not be installed & Disk Utility or Migration Assistant will not be able to open the data on the disk.
There have been long threads that make me steer clear of using ANY Western Digital drive software with 10.9.
https://discussions.apple.com/thread/5475136?start=0&tstart=0
https://discussions.apple.com/docs/DOC-6202 <- WD had to remove software from Macs because it ruined peoples data on 10.9.
There are other threads on WD disk tools causing errors on 10.9, external hard disks do not require the use of additional software on OS X - these apps & drivers are mostly junk that is not a good idea to install.
If you really want to protect your data with encryption the features are already built in to OS X, it's called Filevault. It will encrypt your internal HD & your Time Machine backups (when the OS is encrypted). It works with Apple tools & doesn't rely on any third party drivers.
You will need to disable the 'WD security lock' and make sure the disk works without the WD software if you hope to have any chance of reading it in recovery mode.

OCZ Summit 60gb ssd not detected

Hi all,
I just upgraded my 13.3 2.53 mpb's default 250gb hdd to the ocz summit 60gb ssd. I was able to install snow leopard using the leopard disk and snow leopard upgrade disk. I subsequently installed win xp pro sp3 on boot camp. The ssd is evenly partitioned between osx and windows. After installing win xp, I did not tinker with startup disk settings. I was working on a document in windows and when I returned a hour later, the mbp is showing 'a flashing question mark folder'. I followed the steps described here: http://support.apple.com/kb/TS1440 Using disk utility from my osx install cd, I could see that the ssd is not detected, only the dvd drive is detected. I reopened the mbp and confirmed that the sata connection is secure. On a side note, I put the old 250gb hdd into an external enclosure (which has a time machine backup), it was detected by osx install cd.
Next I'll swap the ssd into the external enclosure and see if its detectable.
Thanks in advance.

So exactly what is your question?
Assuming you are asking what happened to your SSD, you may have to roll back your EFI 1.7 firmware to EFI 1.6 for the SSD to work internally in the computer. I had to in my MBP.

Zen not detected in recovery mod

hey,?i'm trying to reload the firmware.. but its not getting detected in recovery mode... it says its charging on the mp3 player... and it connects in the normal mode... so wtf?

when it's showing this in the recovery mode, unplug the usb cable and reattach it again.... If you are trying to reload the firmware rite, open the firmware you downloaded from creative website. Then attach the usb cable from ur pc to ur ZEN MP3. this shld help solve ur problem.

SSD not detected in MSI bios?

So i have a corsair force lx SSD and it seems to be not detected on the bios. This SSD does have an OS in it and my pc does boot. but sometimes when i turn on my pc it gives the "9C" error i believe. after i did some research hat code means that it is searching for a bootable USB or something similar. So itry to move the SSD to first boot priority but the SSD is not even an option. It is detected, the mobo sees it in board explorer and all but it is not seen on the "boot priority"
I do have an HDD, Optical Drive and the SSD plugged in. But the SSD is in sata port 6. does plugging it farther down the sata port effect its "detectedness"? Should i move it down to sata port 1 or sata port 2?
Sorry if my grammar/sentence structure and all seems messed up. I am in a bit of hurry while typing this thread.
PC Specs:
CPU: fx8350 stock speed
GPU: XFX r9 280x stock speed
MOBO: MSI 970 Gaming
HDD: 1TB Seagate
SSD: Corsair 128GB LX
DVD player

Quote from: Nichrome on 14-September-14, 01:20:34
Which SATA port is the SSD plugged into? Make sure it is into #1 on the motherboard so it's detected as #1. Otherwise some play within BIoS is required to get it up.
The SSD is plugged into sata port 6.
My HDD is plugged into sata port 1
Optical drive is plugged into sata port 2
I will swap my SSD and HDD port and see if it will show up on the boot priority

Why Aperture 3 is not detecting all Exposure Program use by my Nikon D5200

Hi there ! I just wanted to know why Aperture 3 is not detecting Exposure Program use by my Nikon D5200 camera in my metadata photos ? It only detects Aperture Mode and Shutther Mode. I should say that using Adobe's Light Room detects all Esposure Programs / Scenery / Effects so the metadadata is there.
Thanks in advance,

816475 wrote:
I have doubt why my below program's thread is not synchronized.A thread can't be synchronized; a method or a code block can.
Whereas both the thread t1 and t2 shares same object called 't'.So? There is nothing in test that is shared between the two except the method, and that is synchronized, which prevents t1 and t2 from executing it at the same time. What you can't know is whether t1 or t2 will execute first (although t1 probably will more often, simply because it was started first and will hit method() very quickly).
But if I use the same program by implementing runnable interface instead of extending Thread class, its working fine(ie both thread are synchronized)As isocdev said, I suggest you post the version that uses Runnable as well (and please use code tags as he suggested; for what you've already posted I suggest you just edit the post).
Winston

USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

I am running Arch as a host and XP on VMWare workstation 7. My primary purpose of installing XP on VMWare was to use my edit my Line6 POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
I have the usb controller installed.
Any suggestions?
Last edited by devadittya (2009-11-24 20:04:45)

I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

GT60-0NC SSD not detect in AHCI mode using sata3 port

Similar Messages

Maybe you are looking for