GT60-0ND mod bios and EC
Hi, Svet.
I have:
GT60-0ND (ivy bridge, gtx 670m)
Product MS-16F3
BIOS Version: E16F3IMS.50X
EC-FW Version: 16F3EMS1 Ver5.05
Windows 8.1
And I thinking about same as many others - to upgrade to GTX 970m or 980m.
Can I get unlocked bios and firmwares...
QuoteHi, I have MSI GE60 2PC with GTX 850m and would like to unlock GPU's 135Mhz overclocking limit.
yes its possible
QuoteMy second ask, is it possible to increase a bit (in bios or EC, not sure what controls it) power target for GPU or u...
Similar Messages
-
If you don't understend what I want,
https://forum-en.msi.com/index.php?topic=252835.0
I need the same thing as that guy.I have 5 SSD hard drives running off the motherboard. If I reconfigure what you suggested, will I lose support for SATA III for transfer speeds up to 6 Gbps?
Specs:
Board: MSI Big Bang X79 X-Power II MS-7737
Bios: Version 2.8
VGA: EVGA Titan X S... -
Hi Svet,
I have just donated and would like the the following:
System BIOS Version: E16F3IMS.51X (Unlock)
EC Version: E16F3EMS1 VerT.19
or whatever you think is best....
I have a GT60-one (ivy bridge and gtx 680m).
Current bios and EC is
Bios: E16F3IMS.50X
EC 16F3EMS1 ver 5.05
I am planning on doing the vid card upgrade described here...
http://forum.notebookreview.com/threads/the-official-msi-gt60-70-970m-980m-upgrade-thread.765058/
Same thing that Superguy mentioned in his post to you a few weeks ago:
https://forum-en.msi.com/index.php?topic=252575.0
thx,
Paulwell done
Quote
Last question.... is there a recommended windows overclocking too that can let me set some of the critical things within windows instead of going through the 2000 settings in bios?
don't know, XTU perhaps -
check PM, more info is need
QuoteI started the update with the BIOS and it was fine, when suddenly (in the end of the install) the PC reboot and.... nothing, black screen.
does the bios update completed successfully?
how did you flashed it? -
GT60 0ND unlocked BIOS problem
Hello,
I've unlocked my BIOS on my own and have a problem. I can nearly do everything but there is one part missing.
In the BIOS-File I can see that there are toggles in "Chipset". My mod should allow to get access to this part but I can't see it at all.
Could someone look at it and tell me what's wrong with it?
I'm not allowed to post an external link, so maybe I could give a link per pm.
Thanks in advanceQuoteHi, I have MSI GE60 2PC with GTX 850m and would like to unlock GPU's 135Mhz overclocking limit.
yes its possible
QuoteMy second ask, is it possible to increase a bit (in bios or EC, not sure what controls it) power target for GPU or u... -
@Svet
Can you unlock cpu multiplier, memory tweaks,cpu throttling,PPU Dsable etc with this latest bios from msi?
http://msi.com/service/download/bios-18654.html
Thanks ALOTQuote
can i fiddle the timings if i put the speed at 1866mhz?
i think you can customize them with regardless of the freq.
Quote
if the ram cant handle the speed, no hang up or crash on boot up? or not black screen or something?
all scenarios can be expected, from instability to unable to boot.
Quote
HOw to reset bios settings if something might happen? tnx
by removing/disconnecting CMOS battery for some time.
refer to dissasemle guide https://forum-en.msi.com/faq/article/gt60 -
My GT60 0ND just completely died... help?
'm usually not the one to ask for support like this, but this time I would really appreciate some advice. I cherish my MSI GT60 0ND-250US laptop, and while playing a simple, non-graphically demanding game last night, my entire laptop just died. In a split second the fans turned off, the screen went black, the hard drive shut down, and it was completely bricked. It didn't overheat, as that was the first thing I felt for and upon inspection the fans are clean of dust. Talk about any computer user's worst nightmare!
So far, I have tried:
- Removing the power supply and trying to start it up
- Removing the battery and plugging it in and trying to start it up
- Removing the disk drive and trying to start it up
- And finally, removing the HD and trying to start it up
And, as you could probably guess, none of it worked :(. I'm trying not to freak out, but short of replacing the CPU/GPU, I can't really think of what to do! Every 20 seconds or so I can see the battery indicator LED flash on for a split second, so some power is flowing sometimes at least. Otherwise, it is completely 100% dead. I can't find any similar problems for MSI laptops online, and as I said, I'm pretty desperate at this point. If anyone here has any advice at all, I would be greatly, greatly appreciative!Thank you so much for the quick response! In response to your advice:
1. I just tried uninstalling one RAM stick and starting it up, no change.
2. This is one thing I'm hesitant to try - If I uninstall the GPU, I don't have the thermal paste or whatever it's called to reinstall it. Also, I was under the impression that even if the GPU was broken in some way, I would still hear the fans trying to start up. I can of course try this if you believe it's the best course of action, but hopefully as a last resort.
3. Just tried that now, and there doesn't seem to be blinking. Also, I was a bit unclear in my original post: I saw the battery light blinking at about 20sec intervals last night (while the battery was installed and the laptop unplugged), but after a while gave up and got some sleep. By the time I woke up today, the blinking stopped, even though literally nothing changed except for the passage of time.
Again, thanks for the great advice! -
Hi,
I have GT60 0ND (gt60-75x485fd) with following BIOS Version:
E16F3IMS.10U
Three questions:
1) Is it possible to get EFI Firmware on my GT60?
2) Is it possible to unlock the OC Limit of the nvidia Card? (GTX 675MX, limited to +135Mhz Core Clock..)
3) What possibility do I have to overclock the CPU? (i7 3rd Gen)
Thanks in advance!
GreetingsHm got my main problem (GPU OC) fixed by flashing GTX 765MX BIOS (4GB Version) from following thread:
http://forum.techinferno.com/general-notebook-discussions/1847-nvidia-kepler-vbios-mods-overclocking-editions-modified-clocks-voltage-tweaks.html
But I'm a bit confused, as with GE60 Notebook (GTX 660M), I had to flash System BIOS to unlock higher clocks and now I had to flash Video BIOS with nvflash..?? Can I achieve the same thing with another system BIOS?
I also read a bit about CPU OC and as I "only" have a 3630QM only BLCK would work which isn't worth the hassle..
So only problem left is getting EFI BIOS on my machine, but I think it is not possible..
Maybe you can tell me some other things which a modded BIOS can provide for me -
BIOS MSI GT60 ONC mod for recognize VGA
Is it possible to mod BIOS for recognize GTX770M?
I'm not sure BIOS E16F3IMS.10U already supported this one.
Screenshot from GPU-Z on Windows 8
http://s1176.photobucket.com/user/kiba208/media/GTX770M_on_GT60ONC.jpg.html?sort=3&o=1
My problems are HD4000 not fully function, stuttering graphics and kernel driver error every time I used 3D application or DirectX.
Even GPU-Z must open it twice to run.eh bro you can google regarding your questions as this nb which i also have but with gtx680m can be upgraded to 780m. Try going to techinferno.com or with notebookreview.com. The card runs 100& on win7 from win8 and manage to successfully run the new mxm board with a little bios settings.
I hope this helps you with your new mxm board
http://forum.notebookreview.com/msi/719363-review-msi-gt60-w-gtx-780m-4gb-gddr5.html
Quote
(turning off the Secure Boot and switching from UEFI to Legacy in the BIOS) in order to get the card fully operational - otherwise all the drivers I have tried in my Windows 8 partition made the card unstable or simply Windows 8 unbootable (black screen). -
GT70 0ND 51x Unlocked BIOS and EC request
Hi Svet,
I have just donated (9BM80168RH4591154) and would like to ask you for the the following:
1. Unlocked system BIOS 51x for MSI GT70 0ND the one you think would be best to update my system to 970m GPU (as per first post in this thread the BIOS update to 51x is required - htt p://forum.notebookreview.com/threads/the-official-msi-gt60-70-970m-980m-upgrade-thread.765058/)
2. Matching EC
3. If you could - a tool and instruction how to update both (as it will be my first time
I have a GT70 0ND (ivy bridge and GPU is gtx 675MX). My current bios is E1762IMS.50X and EC is 1762EMSI Ver 5.06
Thank you in advance!
Georgereceived it, check PM for next steps
-
Modded Bios Request GT70 0ND MS-1762
Hi all, can someone tell me if i can fully disable the intel hd 4000 from my msi gt70 0ND by the bios? (If this one is modded) I want to disable it for optimus problem on a linux system, if anyone can tell me if it's possible or not! :D
If it's possible, is there a possibility that Svet can do a modded bios for me if i donate for this or something? (sry for my english ^^" )
Thank you for answering and reading! :D
Mainboard: MS-1762
BIOS VERSION: E1762IMS.50X
But the efi.zip is not available on msi website ^^I can start working on it once donation is received: https://forum-en.msi.com/index.php?topic=134259.0
then will send you further details and will work over it and send back to you when its done 2-3 hours later. -
@SVET
Can i have modded bios for oc my gt60 onc ?
With the last bios E16F3IMS.10U
Can you unlock cpu multiplier, memory tweaks,cpu throttling,PPU Dsable etc ?
Thank youYes its possible, i can start work over it once donation is received: https://forum-en.msi.com/index.php?topic=134259.0
optional can also update intel rapid firmware to the latest version -
M93p BIOS issue: PowerOff not correct if Enhanced Power Saving Mode Disabled and Wake on Lan Enabled
Hi Levnovo support team, Recently I bought a M93p tiny(10AAA05MTW)(BIOS revision FBKT56A)and installed with Ubuntu 13.10 myself.Then tried to enable wake on lan for my tiny. The followings are my test result. 1. Enhanced Power Saving Mode Enabled, no mateter what is Wake On Lan setting PowerOff system is OK. 2. Enhanced Power Saving Mode Disable and Wake On Lan Disabled PowerOff system is OK. 3. Enhanced Power Saving Mode Disabled and Wake On Lan Primary or Automatic PowerOff system is NG. When I tried to power off system, it always can poweroff(LEDs on front all off) then POWER ON again in 2 or 3 seconds. I cannot accept this test result ,system should poweroff not reboot again. It's really hard to understand why enabling Wake on Lan will affect power off function. I tried the same procedures with my another M92p(3212A16)(BIOS revision 9SKT70AUS), and it works well.
Did you ever get a fix for this?Having the same issue on 3 of 6 machines that just arrived.
-
MSI GE60 0ND BIOS and EC Request
My System (GE60 0ND-228XTH) came with FreeDos pre-installed.
BIOS Version: E16GAIMS.10F
BIOS Build: 12/18/2012 15:20:43
EC Version: 16GAEMS Ver4.04
EC Build: 04/26/2012
The real need of this request is to fix the Wireless Connection Drop issue (happens randomly or after waking up) occurred in Windows 8 OS.
I have tried ...
- Every combination of BIOS/EC that are provided in the official MSI page and compatible with my System.
- Every SCM that is compatible with Windows 8 OS.
- Any solution about Connection Drop issue in Windows 8 OS.
but still no luck.
The best bet is to use
- E16GAIMS.10F BIOS
- 16GAEMS1.505 EC
Though the problem still persist, the frequency of occurrence is less than other approaches.
Since this above EC firmware is for Windows 8 System, so this is not the best workaround for my system.
That is why my assumption came up with BIOS/EC and made this request.
This problem is NEVER shown in the Windows 7 OS and any Linux Distributions.
Also, can you add any updates possible for BIOS and EC.
I will make a donation as soon as possible after your confirmation.
Thank in advance.
Edit: Added Current BIOS Configuration Screen.Quote
its probably wifi driver related or something specified for win8
try different wifi drivers
I already tried many drivers from the MSI itself, Intel, even other Notebook Manufacturers, but still not working.
I have tested Windows 8 in my friend's notebook(DELL) that has similar Wireless Adapter and everything working fine without issues like mine, so that means Windows 8 is not the culprit.
Quote
try set wifi to max performance from power profiles
This is one of solutions I've tried long ago and it failed.
Anyway, thank for your response. -
GT60 0ND is Impossible UEFI Boot Oprion?
GT60 0ND is Impossible UEFI Boot Oprion?
Hi
I have a GT60 0ND , and my OS is Windows 8 Enter X64
Mainboard: MS-16F3
PCB Version: REV:1.0
BIOS Version: E16F3IMS.30S
BIOS Date: 2012-12-27
EC-FW Version: 16F3EMS1.504
To know about how to update win8 BIOS under UEFI mode, please click here.
When going into the bios, I dont have the following option
Under Security tab, look for the option ”Secure Boot” and set it to ”Disabled”
Can I unlock bios UEFI boot?Quote from: guwer on 30-January-13, 09:38:34
GT60 0ND is Impossible UEFI Boot Oprion?
Hi
I have a GT60 0ND , and my OS is Windows 8 Enter X64
Mainboard: MS-16F3
PCB Version: REV:1.0
BIOS Version: E16F3IMS.30S
BIOS Date: 2012-12-27
EC-FW Version: 16F3EMS1.504
To know about how to update win8 BIOS under UEFI mode, please click here.
When going into the bios, I dont have the following option
Under Security tab, look for the option ”Secure Boot” and set it to ”Disabled”
Can I unlock bios UEFI boot?
Did your notebook come with Windows 7 or Windows 8 installed ORIGINALLY?
If it came with Windows 7, there is no way to enable UEFI booting.....which explains why you can't see that option....
Maybe you are looking for
-
How can I count the number of values in one column which answer to a condition in another column?
I'm using Numbers 3.2 and would like to count the names in a column which satisfy a condition in a different column. There are 3 "streams" through which these names have come to me, and I would like to easily identify how many have come from each str
-
How do I cut an image in half and move the halves independently?
How do I cut an image in half, and move the halves independently?
-
Where can I buy a replacement power supply for Optiplex 9020 Mini Tower?
Where can I buy a replacement power supply for Optiplex 9020 Mini Tower? I don't see anywhere on Dell's website to purchase this.
-
There's no more room on my iphone, and I won't have a laptop for another month. I thought turning on icloud on my phone would do the trick, but nothing is happening. I don't want to delete my summer-long trip photos! Any solutions are appreciated.
-
Initiating bpm 11g process with an attachment?
Hi, Facing problem in passing the attached file to the next human task. Basically, initiating a bpm process with file adapter getting the file as an attachment. after that need to pass the file to next human task for approval. stucked in passing the