GT60 issue with keyboard manager software after Windows Update

After a recent Windows update, I've started to get an annoying pop-up when I boot my GT60-0NE. The box says: "Microstar SCM service is stopped!!!" I then have to click OK and immediately get a UAC pop-up asking for permission to run Msiservice.exe which I also have to approve. Finally after clicking OK twice my keyboard will light up. This is Windows 7 64-bit running S-Bar 2.0 (Ver 4.5) and Keyboard LED Manager v1.0.1112.1901
Anyone else seeing this? Could it possibly be related to IE10? I tried disabling UAC but that only got rid of the second pop-up. Still got the SCM service stopped error. Thing is, when you check services it is in fact running not stopped.
Edit: Uninstalled IE10 and the problem went away. If anyone from MSI reads this please take note that either S-Bar and/or KLM have issues running on Windows 7 systems with IE10 installed.

Quote from: Svet on 03-April-13, 20:19:50
you can report this to msi at >>How to contact MSI.<<
Thanks. Did that last night. They said they would inform their software team.

Similar Messages

Issue with right-click menu after latest update

After updating Firefox, the right-click menu is showing much more commands than before (Play, Pause, Mute etc. etc.), most of them out of context ("Open Link in New Tab" when there is no link) and none of them working.

Issues with a massive right-click context menu have been reported as caused by Firebug, so make sure to update Firebug to the latest version.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Found some severe issues with my Xperia mini after ICS update

Hi,
I am a application and game tester from India and i am using Xperia mini for 7 months, last month i have upgraded my mini with ICS. But the update is not so good as i am facing many problems after updating. I am listing few of my problems below, i dont know this is for my set or with all:
1. If i am forwarding any message and selects 'Add Recipient' option then the phone get stuck in the Contacts list and fails to respond the back button. Also on returning to Home screen and selecting message option after than then Contact list opens instead of Message and to rectify this issue i have to restart my mobile.
2. For my Calenders(i have sync with Facebook) there are lots of event marked on the days but on selecting the particular dates no name is displayed just blank tabs are displayed.
Please reply me is this the problem with all Xperia Minis(ICS)? or i am the lucky one . If this is with all then please fix the issues and make a new update available.
Regards,
Touseef

Hi guys, well as a matter of facts, yes, I have a similar problem, amongst other...
-This feature I use a lot: in GB, when i open conversation, on the top the contact`s name and phone appears, i tap on it and make the call, in ICS, when i tap on it, it opens Contact list from the begining, so i have to find the contact which i want to call. And on the end, back and menu buttons don`t work in that case (like toseefb2 problem), so i have to press the home button....
Maybe, just maybe this happens because i installed Skype, because, after its installation, when i wanted to send an SMS, it asked me which will the messaging app going to be used, Skype or Messaging. I`ve chosen the Messaging and my problem appeared. Only Contacts with picture can be called, and only if i tap the picture...
Please solve this, i don`t want to uninstall Skype, nevertheless, the phone should work regulary even with 3rd party apps.

Issue with addPartialTarget method (Pop-up window)

Hi, I am facing an issue with addPartialTarget method (pop-up window case). Please refer the thread Re: popup dialog problem
If we are using addPartialTarget method, should the managed bean be in session scope? I've set it is in request scope. It works fine with 1 user. But if we test with more than 1 user using HP mercury load runner, it is failing and giving the following exception related to partial target. What should be the solution for this issue? This is very urgent. Even after setting the managed bean in session scope, I am getting the same error as shown below:
java.lang.ArrayIndexOutOfBoundsException: -1
at java.util.ArrayList.get(Unknown Source)
at oracle.adfinternal.view.faces.renderkit.core.ppr.PPRResponseWriter._popPartialTarget(PPRResponseWriter.java:223)
at oracle.adfinternal.view.faces.renderkit.core.ppr.PPRResponseWriter.endElement(PPRResponseWriter.java:138)
at oracle.adfinternal.view.faces.ui.ElementRenderer.postrender(ElementRenderer.java:81)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.postrender(XhtmlLafRenderer.java:225)
at oracle.adfinternal.view.faces.ui.BaseRenderer.render(BaseRenderer.java:83)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.render(XhtmlLafRenderer.java:69)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:346)
at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:301)
at oracle.adfinternal.view.faces.ui.composite.UINodeRenderer.renderWithNode(UINodeRenderer.java:90)
at oracle.adfinternal.view.faces.ui.composite.UINodeRenderer.render(UINodeRenderer.java:36)
at oracle.adfinternal.view.faces.uinode.UIXComponentUINode.renderInternal(UIXComponentUINode.java:177)
at oracle.adfinternal.view.faces.uinode.UINodeRendererBase.encodeEnd(UINodeRendererBase.java:53)
at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
at oracle.adfinternal.view.faces.renderkit.RenderUtils.encodeRecursive(RenderUtils.java:54)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:242)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeAllChildren(CoreRenderer.java:265)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.renderContent(PanelPartialRootRenderer.java:65)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.renderContent(BodyRenderer.java:117)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.encodeAll(PanelPartialRootRenderer.java:102)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.encodeAll(BodyRenderer.java:60)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.delegateRenderer(CoreRenderer.java:281)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.DocumentRenderer.encodeAll(DocumentRenderer.java:60)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
at javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:645)
at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:568)
at oracle.adf.view.faces.webapp.UIXComponentTag.doEndTag(UIXComponentTag.java:100)
at app.App__cusadd_jspx._jspService(_App__cusadd_jspx.java:3274)
at com.orionserverhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:287)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.webcache.adf.filter.PageCachingFilter.doFilter(PageCachingFilter.java:274)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Unknown Source)

duplicate
Frank

I have been having issues with my computer lagging after installing lion.

I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Issues with Messaging Manager in ATG 10

Hi,
We are facing an issue with messaging manager. In weblogic we have configured datasource as 'coreDataSource', somehow MessagingManager is looking for coreDataSource_shop and throwing error that Datasource is not available?
How to resolve this? I am using ATG 10.3 and Weblogic 10.3.5.
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager     limbo : error querying for messages     CONTAINER:atg.repository.RepositoryException; SOURCE:java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMFAIL start() failed on resource 'coreDataSource_shop': XAER_RMFAIL : Resource manager is unavailable
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager     oracle.jdbc.xa.OracleXAException
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1110)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:240)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:50)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.jta.DataSource.start(DataSource.java:729)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1231)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1164)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:285)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:522)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:449)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1599)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1503)
Thanks
Gopi

still the issue is exist.
At one point of time, Database is not able to provide connection for coreDataSource. After that shop is trying to get connection from JNDI coreDataSource_shop, which is not available in weblogic.

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

Issue with length of file paths - Windows & C++ plugin

Hello,
I've got an issue that just popped up on my OCR plugin I've been working on that I suspect is related to the length of the filepath.
I'm getting the following error that is being caught and logged when trying to open a file (filename changed for security purposes):
Error Opening File: D:\aVeryLongFilePath.pdf
Exception info: This file cannot be found.
The entire string, including the D:\ part, is 266 characters long. I cut down the length of part of the path one by one and it was able to open and OCR the document when the length was 259 characters.
I know there's a MAX_PATH variable in Windows and/or there's some kind of limitation for file length. Note that I can open the file in Acrobat using File->Open and run OCR on it individually using the built-in Recognize Text function, but if I try to Recognize Text for Multiple files and choose "Add Folders", the file in question doesn't show up in the list of files to be batch OCR'd (even though it is there). Interestingly, choosing "Add Files" from the Recognize Text->In Multiple Files does work. So Acrobat itself has at least some issues opening the file using some of it's features.
Here's how I'm opening the document:
     string pn;               // assume this is initialized, I'm just putting this here to demonstrate what type it is
     pathName = pn;
     ASAtom pathType = ASAtomFromString("Cstring");
     asPathName = ASFileSysCreatePathName(ASGetDefaultFileSys(), pathType, pn.c_str(), NULL);
     pdDoc = PDDocOpen(asPathName, ASGetDefaultFileSys(), NULL, true);
Is there a way around this problem?
Thanks.

Yes, you are hitting the MAX_PATH on certain versions of Windows.   The only workaround would be to see that the file is "a very long path" and then break up the pathname construction into multiple pieces (perhaps the containing directory and then the file itself). The other option is don't use Cstring to construct, use the Unicode variant.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 7 Nov 2011 15:43:33 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Issue with length of file paths - Windows & C++ plugin
Issue with length of file paths - Windows & C++ plugin
created by zephed56<http://forums.adobe.com/people/zephed56> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4012710#4012710

Buggy issues with keyboard buttons.

Getting constant issues with keyboard keys in Photoshop. Delete key does not delete layer, Fill layer (Option Delete) only works when I change tools. And it does this intermittently. It's very annoying!
Anyone else have these issues? These are just some of the issues that pop up.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Issue with font files on japanese Windows 8 OS

We are currently facing an issue with the fonts on japanese Windows 8. While doing a normal compilation of a painter screen that is part of our application we are facing compilation issues on japanese version of Windows 8. The same operation goes perfectly
fine on english version of winodws 8. While investigating the compilation issue, we could figure out that manually reinstalling msgothic.gcc files at times helped in successful compilation of painter screen file. Could you please help us understand
the exact impact of manual reinstallation. Also please advise on how to address this issue.
Please keep us posted about why there is difference in between windows 8 japanese and english versions from the gothic files perspective.
Thank you,
Sreelatha.

Hi Sreelatha,
For issues about your OS, please reopen a new case on MS Answers
http://answers.microsoft.com/en-us/windows/forum/windows_8?tab=Threads
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Having issues with profile manager on 10.9 loosing users/device assignments.

I'm having issues with profile manager on 10.9 loosing users/device assignments. Luckly I only have arround 70 devices added so far. The first time it happened I thought it was just a freak thing, but it has just happened again. What I find weird is nothing on the server was changed, no devices added. So when this happens my users phones lose access to email, because I'm using variables, which rely on the user being assigned to the device. Anyone know how to fix this, and if not. Does anyone know how to backup and restore just profile manager in 10.9. Thanks.

I enabled all users in my AD "Domain Users" group access to "Profile Manager". I had also initially enabled "Profile Manager" access for a few individual users. Those users did not loss the device assignments. I'm not absolutely sure why/if allowing access for a group is causing this issue. Enabling access for each person would be very time consuming.... Maybe adding access to the individual users is importing that user into OD?

Issues With Football Manager Live

Over the last few days I have had issues with Football Manager Live for which I have played for a year with no issues. At around 7 pm the game just died, yet I have no trouble playing any other online games that require more bandwidth. I read the FML forums and there are lots of people saying they have the same issues with BT. Can anyone please provide a solution? Many thanks

Hi James,
Thanks for the post and welcome to the forum.
Have you been able to play Football Manager online again? There could be a number of reasons for the game drop out but I think broadband speed would be a good place to start.
Please run a speed test via www.speedtester.bt.com and post your results here, this will give us a clear picture of how your connection is running and if there are any issues. At the very least we can rule out broadband speed being the cause.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Are there any issues with itunes where as certain windows looks like a PC in safe mode?

are there any issues with itunes where as certain windows looks like a PC in safe mode?

Check your trash. I had some old uninstalled files in there. Deleted and restated itunes. seems to work.

Dell Latitude E6520 fails to boot after Windows Updates

Hello,
I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
a recovery disk and run:
dism /image:D:\ /cleanup-image /revertpendingactions
This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending:
kb2982378
kb2978742
kb2977629
kb2976897
kb2973112
kb2972211
There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
2014-09-18 10:52:04:214
496 540
AU Install complete for all calls, reboot needed
2014-09-18 10:52:04:216
496 540
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:623
496 8a4
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-09-18 10:52:04:623
496 8a4
AU Triggering Offline detection (non-interactive)
2014-09-18 10:52:04:623
496 8a4
AU AU setting pending client directive to 'Reboot Pending'
2014-09-18 10:52:04:623
496 8a4
AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
2014-09-18 10:52:04:625
496 8a4
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:625
496 1668
AU #############
2014-09-18 10:52:04:625
496 1668
AU ## START ## AU: Search for updates
2014-09-18 10:52:04:625
496 1668
AU #########
2014-09-18 10:52:04:626
496 1668
AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
2014-09-18 10:52:04:626
496 166c
Agent *************
2014-09-18 10:52:04:626
496 166c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:04:626
496 166c
Agent *********
2014-09-18 10:52:04:626
496 166c
Agent * Online = No; Ignore download priority = No
2014-09-18 10:52:04:626
496 166c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-09-18 10:52:04:626
496 166c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-09-18 10:52:04:626
496 166c
Agent * Search Scope = {Machine}
2014-09-18 10:52:05:210
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:07:170
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:475
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:569
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:11:590
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:14:999
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:16:887
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:18:753
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:19:623
496 1668
Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
2014-09-18 10:52:20:673
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:573
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:773
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:464
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:651
496 1668
AU AU received handle event
2014-09-18 10:52:26:366
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:27:520
496 1668
Shutdwn user declined update at shutdown
2014-09-18 10:52:27:520
496 1668
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:27:520
496 1668
AU AU initiates service shutdown
2014-09-18 10:52:27:520
496 1668
AU ########### AU: Uninitializing Automatic Updates ###########
2014-09-18 10:52:28:206
496 166c
Agent * WARNING: Exit code = 0x8024000B
2014-09-18 10:52:28:206
496 166c
Agent *********
2014-09-18 10:52:28:206
496 166c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:28:206
496 166c
Agent *************
2014-09-18 10:52:28:206
496 166c
Agent WARNING: WU client failed Searching for update with error 0x8024000b
2014-09-18 10:52:28:253
496 1668
Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
2014-09-18 10:52:04:216-0600 1
193 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems
(KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
(KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
for Windows 7 for x64-based Systems (KB2978742)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:425
496 1668
Service *********
2014-09-18 10:52:28:425
496 1668
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-09-18 10:52:28:425
496 1668
Service *************
Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.

Hi ChristianBoman,
We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
http://windows.microsoft.com/en-us/onedrive/share-file-folder
for the update error 0x8024000b, please refer to the following article.
http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
Please take the following steps:
1. Run the Windows Update Troubleshooter.
2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
3. Copy the following text, and then paste it into the Run text box:
Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
4. Click OK.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

GT60 issue with keyboard manager software after Windows Update

Similar Messages

Maybe you are looking for