GT683 Bluetooth switch Issue :))
Hello...
Maybe somebody skilled can help me:
when I've bought GT683, it was equipped with Intel Centrino Wireless-N 130 WiFi+Bluetooth.
Because I need dual-band, I've upgraded nbook to Intel Centrino Advanced-N 6230 WiFi+Bluetooth (by replacing half PCIe minicard).
(The new one has same BT onboard, the version 3.0+HS to be exact.)
Everything works great only Bluetooth switch next to power button now isn't able to switch-off the BT (but the WiFi switch next to him is able to turn off/turn on WiFi correctly).
Is there any way how to force the BT switch to behave correctly too? (For example in Windows system registry by assigning new Hardware ID... ...(USB\VID_0A12&PID_0001) to be exact to it?
I know that nbook is sold with many different WiFi cards, so it should be possible somehow...
Thanks for any help.
Ben
Quote from: ATOMANT on 19-July-11, 02:07:08
I just bought a GX680 and most of the keys on the LH side of the keyboard are very noisy. When typing there is an audible clang whenever you press any of those keys. I am being denied any RMA or warranty from NCIX.com because they claim its "not a known issue".
Atomant: That's the same experience I'm having. The clang is caused by the keyboard flexing. This causes friction on the board. It's a very annoying sound, made even worse by the fact it's only some keys.
I use a Dvorak keyboard layout, and the AOEUI keys are all on the home row left side, so they are the most commonly typed keys.
If I discover a method to quiet the keyboard, I'll post it here.
Similar Messages
-
Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..
Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).
iPhone 4S, iOS 5.1.1, VW bluetooth -
Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse
Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering. -
Anybody having bluetooth connectivity issues after devices are paired? Periodically, my mouse stops working and I have to turn it off and back on for it to reconnect. Mouse doesn't do this when paired with my old Dell Inspiron 9300 laptop.-bp
Hi All, I have been experiencing this random disconnect problem as well. Sometimes it came good and then sometimes I had to remove and reinstall the same as everyone else.
My problem is with a Logitech V470 mouse. <o:p></o:p>
Recently the symptoms changed and it became a permanent device instead of a bluetooth connected device. <o:p></o:p>
Furthermore, it couldn't be removed at all. The only way to remove it was to uninstall all of the Bluetooth module drivers. When the system rebooted,
it again loaded as a permanent device along with printers. Please note I'm talking about it being fully connected but not functioning whether it was turned on or off (present or not present). I wondered what had changed this time to make this significant
change in behaviour. Okay time to roll-back updates and go to a previous restore point/s. Guess what, problem solved! I had to go back two restore points to fix the problem. What was it, it was a JAVASCRIPT auto update!<o:p></o:p>
Once I past (rolled back) the most recent Javascript update the mouse returned to a bluetooth connected device and I could disconnect and reconnect. Javascript
changed the way this device was being recognised and connected.
JAVASCRIPT is underlying all of these problems of connection. Roll it back and suddenly you'll have control again! Hopefully Oracle will soon fix
this, until then, I'm disabling updates of JAVA.<o:p></o:p> -
Fireworks CS3 Program Switching Issue
In the office we have 3 machines using Fireworks CS3 (part of Studio CS3). All the machines are experiencing the issue I am about to describe. Each machine is an Intel Core 2 Duo with 4GB ram. All 3 machines are using Windows Vista.
We all had the old Vista Aero problem with brushes, and we quickly overcame this by using the "disable desktop composition" fix.
However, one problem we have never been able to solve occurs when switching between ANY application and Fireworks. There is a delay of at least 20-30 seconds (sometimes more) when trying to swap back to Fireworks. We have being doing various Google & Adobe forum searches regularly over the past 2+ years, looking in vein for a fix, but as yet have still not managed to find a solution or even a record of someone else with the same issue (mainly because out searches are dominated with the old "disable desktop composition" fix). We assumed it was a problem fundemental to CS3 yet still hold out hope for a solution.
Normally it's not a problem, but when working on websites which involve a lot of graphics edits and/or switching in and out of Fireworks it can quickly add a very frustrating hour or more to a job.
Recently, I was forced to upgrade to a new computer with Windows 7, and transfered my old CS3 install to the new machine. I was surprised to find that I can switch in and out of Fireworks instantly, much to the frustration of the other guys in the office who are unfortunately stuck with Vista for the time being.
Is there a fix for this horrible switching delay on Vista and has anyone else here even sufered with the same issue?
TL:DR - This is not the desktop composition problem with brushes which seems to domnate results when we try to search for a fix, this is a very noticable delay when swapping in and out of Fireworks.I'm affraid that didn't help. It actually slowed down the inital launch of the program and it took around 5 minutes for Fireworks to finally start. Once started the program switching issue was still present
-
Is there any fix for the bluetooth connectivity issue after most recent OS update?
Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?
There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you. -
Bluetooth connection issues after update
Is anyone experiencing bluetooth connection issues after upgrading to iOS 8.1.3? I upgraded to iOS 8.1.3 and now it won't connect to my car bluetooth and my bluetooth speaker will sound like it has static from time to time.
Hi, joshzik.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing issues with various Bluetooth devices and your iPhone. Sometimes pairing the devices again can resolve the issue. However, here are a couple articles that have some helpful troubleshooting steps regarding Bluetooth connectivity and an iOS device.
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
-Jason H. -
Wacom or Bluetooth Mouse issues with most recent Beta??
Wacom or Bluetooth Mouse issues with most recent Beta??
All I was wondering if anyone was having issues with Lightrooms beta and pointing devices… while I’m sure the Wacom Introus4 is dying in Lightroom I can’t verify that my Mouse is as well.
I’m using the most recent Beta of Lightroom and Wacom Tablet Driver 615-3a… I’m sure the issue dosent reside with another program because the tablet only stops working in Lightroom. Basically I loose all tablet functionality until I reboot whin I attempt to access the Film Strip… I’ve repeated a few times and with each it dies…Unfortunately, although you are getting problems with your Wacom and Lr, the solution for the short term is to re-install an older driver for the tablet until Wacom come up with a new update to fix the prolem. This has been a long running problem for users when operating Lr with Wacom tablets.
(I offer this solution not from personal experience, but from what other tablet users have reported in previous threads, and there have been several). -
Apple is experiencing Bluetooth compatibilty issue since they have upgraded their Bluetooth from 2.1 to 4.0. Is this the case with Ipad 4 I have a logictech keyboard and the ipad cant dicover it. Please advise
I wouldn't delete the firewall configuration as described above as you would lose all your rules that you have in place for your firewall. I do however think it could be a firewall rule issue. You could temporarily disable the firewall on the mac System Preferences > Security > Firewall to prove this without deleting all your rules by deleting that file. If this works then have a look at the rules you have in place and maybe make an exception to this set of rules.
The 169..*. address you have is known as a APIPA address and is normally the address that you will receive when the DHCP client fails to find a DHCP server so this could be either sending or receiving data to the device that is blocked. DHCP needs to DORA (Discover, Offer, Receive and then Accept), which is a two way communication.
Kind Regards -
HT204490 bluetooth connectivity issue - Yosemite10.10.3 update
The bluetooth connectivity issue still remains unresolved even after Yosemite 10.10.3 update. Any help will be appreciated.
Nobody here knows that since 10.3 hasn't been released yet. You might check crackberry.com and see if anyone testng the leaked version has a Mercedes and can test.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Should Bluetooth switched on all the time on my mac Pom pro
Should I Bluetooth switched on all the time on my mac Pom pro
Use it only when you need it. Keeping applications open which are not needed will just shorten battery life if you are under battery power and will unnecessarily slow down the MBP.
Ciao. -
I have tried the Sony Ericsson HBHDS980 and HBHDS205 both have drop call issues. Music works flawlessly, but whenever I receive a call or try to call someone, the connection always drop after a while. I have had the drop call issue with the HBHDS980 on other Win Mobile phones. I am just wondering if others have issues with stereo bluetooth head set. I have a blueant V1 which works flawlessly for calls but it's not stereo.
How do you mean car update? The head unit is aftermarket not built-in so the car itself does not have Bluetooth. It's worth noting (I forget whether I already did or not) that the Bluetooth streaming works perfectly with my iPhone 5 just not with the Sony. I'm now on my second Xperia Z2 as the first one's call quality was abysmal. While this one seems a **bleep** of a lot better this Bluetooth streaming issue is actually doing my head in and making me want to change phones completely.
-
Inspiron 620 power switch issue.
The description I found for the problem I'm having seems like the power switch issue. I took the switch out and used an ohm meter to test it. It's good. Now What?
I have a Sapphire R7 260X and found that it did not support DOS VESA Bios video modes.
This meant that It does not display anything on a VGA monitor and booted to an F12 Bios menu that said ERROR unable to set vesa video mode 103. This meant that F2 CMOS setup was unavailable EVER with this card.
When I called them they said they don't support DOS or Vesa Extensions.
I ended up using an EVGA Geforce 750 TI SC instead. -
Nexus-switches issues no arp-requests.
Hallo all,
I see a very strange behavior on my two nexus switches.
Both are Nexus 5548 with L3-daughter-cards. Both do l2 and l3-switching, ACL-filtering and other things. Furthermore I have a set of servers connected to both switches in a vPC-setup. All in all I do nothing special.
After reloading the primary switch (vpc-primary, root-bridge for all vlans and hsrp-active with preemption for all SVIs) the switche comes back online and after getting up all links and reconverging everthing the network breaks. After a lot of debugging and curses and connection tries and a few additional gray hairs later I have got it to work by pinging all ip-addresses from the switch that I have previously rebooted.
Later I do some tests to find out what was going wrong. I found out that if I clear the arp-cache I will get the same issue. Pinging from server A in one subnet to server B in another subnet doesn't lead to success, because the switch issues no arp-requests. To make it work just ping server B from the switch and all works fine. The switch does arp, the arp-table is updated and the pings from the server A will reach the server B.
Any ideas?
Regards
Thomas
^^°-°^^I can post a extraction of the relevant config items.
- --[ vpc-primary
cfs01# sh run
!Command: show running-config
!Time: Wed Nov 13 08:46:18 2013
version 5.2(1)N1(1b)
cfs eth distribute
vrf context CEPH
vrf context management
ip route 172.31.0.0/20 172.31.8.190
vlan 14
name 172.31.50.0/26_CN/NN/OSDs@DMZ
vlan 4080
name 172.31.48.64/26_NAS.Infrastr@DMZ
spanning-tree vlan 1-129,131-3967,4048-4093 priority 0
udld aggressive
vpc domain 1
role priority 1
peer-keepalive destination 172.31.8.179 source 172.31.8.178
peer-config-check-bypass
delay restore 150
peer-gateway
auto-recovery
ip arp synchronize
interface Vlan14
no shutdown
mtu 9216
description CN/NN/OSDs@DMZ
ip access-group acl-vl14-in in
vrf member CEPH
no ip redirects
ip address 172.31.50.61/26
no ip port-unreachable
hsrp version 2
hsrp 3
authentication md5 key-string 3-14
preempt delay minimum 30 reload 60
priority 255
ip 172.31.50.62
interface Vlan4080
no shutdown
mtu 9216
description NAS.Infrastr@DMZ
ip access-group acl-vl4080-in in
vrf member CEPH
no ip redirects
ip address 172.31.48.125/26
no ip port-unreachable
hsrp version 2
hsrp 3
authentication md5 key-string 3-4080
preempt delay minimum 30 reload 60
priority 255
ip 172.31.48.126
interface port-channel7
switchport mode trunk
switchport trunk native vlan 991
spanning-tree port type network
speed 10000
vpc peer-link
interface port-channel100
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14-19,991,4078-4080
speed 10000
vpc 100
interface port-channel102
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14,18,991,1299-1400
speed 10000
vpc 102
interface Ethernet1/1
no cdp enable
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14-19,991,4078-4080
channel-group 100 mode active
interface Ethernet1/3
no cdp enable
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14,18,991,1299-1400
channel-group 102 mode active
interface Ethernet1/29
description cfs02_Eth29
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/30
description cfs02_Eth30
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/31
description cfs02_Eth31
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/32
description cfs02_Eth32
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface mgmt0
description oam01_Gi0/19
ip address 172.31.8.178/26
cfs01#
- --[ vpc-secondary
cfs02# sh run
!Command: show running-config
!Time: Wed Nov 13 08:46:05 2013
version 5.2(1)N1(1b)
cfs eth distribute
vrf context CEPH
vrf context management
ip route 172.31.0.0/20 172.31.8.190
vlan 14
name 172.31.50.0/26_CN/NN/OSDs@DMZ
vlan 4080
name 172.31.48.64/26_NAS.Infrastr@DMZ
spanning-tree vlan 1-129,131-3967,4048-4093 priority 4096
udld aggressive
vpc domain 1
role priority 2
peer-keepalive destination 172.31.8.178 source 172.31.8.179
peer-config-check-bypass
delay restore 150
peer-gateway
auto-recovery
ip arp synchronize
interface Vlan14
no shutdown
mtu 9216
description CN/NN/OSDs@DMZ
ip access-group acl-vl14-in in
vrf member CEPH
no ip redirects
ip address 172.31.50.60/26
no ip port-unreachable
hsrp version 2
hsrp 3
authentication md5 key-string 3-14
priority 254
ip 172.31.50.62
interface Vlan4080
no shutdown
mtu 9216
description NAS.Infrastr@DMZ
ip access-group acl-vl4080-in in
vrf member CEPH
no ip redirects
ip address 172.31.48.124/26
no ip port-unreachable
hsrp version 2
hsrp 3
authentication md5 key-string 3-4080
priority 254
ip 172.31.48.126
interface port-channel7
switchport mode trunk
switchport trunk native vlan 991
spanning-tree port type network
speed 10000
vpc peer-link
interface port-channel100
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14-19,991,4078-4080
speed 10000
vpc 100
interface port-channel102
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14,18,991,1299-1400
speed 10000
vpc 102
interface Ethernet1/1
no cdp enable
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14-19,991,4078-4080
channel-group 100 mode active
interface Ethernet1/3
no cdp enable
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14,18,991,1299-1400
channel-group 102 mode active
interface Ethernet1/29
description cfs01_Eth29
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/30
description cfs01_Eth30
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/31
description cfs01_Eth31
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/32
description cfs01_Eth32
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface mgmt0
description oam02_Gi0/19
ip address 172.31.8.179/26
cfs02# -
I believe I am experiencing the problems discussed in this article: http://www.macnn.com/articles/14/11/04/several.support.threads.discussing.issue. related.to.gpu.switching/
However I am not sure. I am not that tech savvy... Anyway my computer is becoming unusable. Its truly driving me crazy. Its worth noting that I would have this problem OCCASIONALLY while running Mavericks, since the update it has become far me frequent: Computer Restarts shows message "you computer has restarted because of a problem" or sometimes my screen just goes black, the sound still plays. Pasted below is the error report. Can anyone tell me, do I have the common problem as discussed in the article or something else? I have had this machine for about 18 months, already had to replace the SSD, now this. It looks like I maybe on my way to having a $3k paperweight. Please help!
Anonymous UUID: BE42D0F0-B5F9-BC04-6475-B64036043957
Thu Nov 13 00:02:31 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff7fa5e90f63): "GPU Panic: [<None>] 5 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x104000000 0xffffff8212ed8000 0x0e7150a2, D0, P1/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.7.21/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff820ec22a30 : 0xffffff802333a811
0xffffff820ec22ab0 : 0xffffff7fa5e90f63
0xffffff820ec22b90 : 0xffffff7fa3fd0d28
0xffffff820ec22c50 : 0xffffff7fa409b1b6
0xffffff820ec22c90 : 0xffffff7fa409b226
0xffffff820ec22d00 : 0xffffff7fa42d2d7e
0xffffff820ec22d90 : 0xffffff7fa42ea50b
0xffffff820ec22dd0 : 0xffffff7fa4113a13
0xffffff820ec22e00 : 0xffffff7fa411399d
0xffffff820ec22e30 : 0xffffff7fa4221c9f
0xffffff820ec22e60 : 0xffffff7fa4223971
0xffffff820ec22f00 : 0xffffff7fa4223f38
0xffffff820ec22f80 : 0xffffff7fa3fe5bbf
0xffffff820ec22fd0 : 0xffffff7fa422806a
0xffffff820ec23130 : 0xffffff7fa42285fa
0xffffff820ec231b0 : 0xffffff7fa40d2bee
0xffffff820ec23380 : 0xffffff7fa40d178f
0xffffff820ec233c0 : 0xffffff7fa40e18f8
0xffffff820ec23420 : 0xffffff7fa40e257b
0xffffff820ec234e0 : 0xffffff7fa3fbb807
0xffffff820ec23510 : 0xffffff7fa3fbaf09
0xffffff820ec23530 : 0xffffff7fa3fbb894
0xffffff820ec23570 : 0xffffff7fa3fbad5f
0xffffff820ec23610 : 0xffffff7fa3fad2d5
0xffffff820ec236b0 : 0xffffff7fa3fd53a5
0xffffff820ec238b0 : 0xffffff7fa3fd638c
0xffffff820ec23990 : 0xffffff7fa41775fc
0xffffff820ec239e0 : 0xffffff7fa4177c80
0xffffff820ec23a90 : 0xffffff7fa416be63
0xffffff820ec23c60 : 0xffffff7fa3f8278b
0xffffff820ec23cf0 : 0xffffff7fa3f6bfc4
0xffffff820ec23d70 : 0xffffff7fa3f6ef9a
0xffffff820ec23db0 : 0xffffff7fa3f6e816
0xffffff820ec23e20 : 0xffffff7fa3f3381f
0xffffff820ec23e60 : 0xffffff7fa3f32b50
0xffffff820ec23e90 : 0xffffff7fa3f2ed33
0xffffff820ec23ef0 : 0xffffff80238d7162
0xffffff820ec23f40 : 0xffffff80238d507d
0xffffff820ec23f80 : 0xffffff80238d5146
0xffffff820ec23fb0 : 0xffffff80234192c7
Kernel Extensions in backtrace:
com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7fa3f6a000->0xffffff7fa3f79fff
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa3f23000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
com.apple.driver.AppleMuxControl(3.7.21)[32B7E2DE-1F9D-3555-B687-7A76A62B81D2]@ 0xffffff7fa5e82000->0xffffff7fa5e95fff
dependency: com.apple.driver.AppleGraphicsControl(3.7.21)[62689710-EEA7-307A-AC83-B8F25DA88 A6A]@0xffffff7fa5e7a000
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7fa4801000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa3f23000
dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[0183904C-6A16-32C4-9405-EEFD7F820B 02]@0xffffff7fa5e7d000
com.apple.nvidia.driver.NVDAResman(10.0)[53CC0E05-7382-336C-8239-AE884D6CA71A]@ 0xffffff7fa3f80000->0xffffff7fa41f5fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7fa3f6a000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa3f23000
dependency: com.apple.AppleGraphicsDeviceControl(3.7.21)[4700601D-3FEB-3B86-B2BA-8D71AF84D1 C4]@0xffffff7fa3f7a000
com.apple.nvidia.driver.NVDAGK100Hal(10.0)[DC43029D-568A-3B7C-976B-E922C17F5143 ]@0xffffff7fa4201000->0xffffff7fa43aefff
dependency: com.apple.nvidia.driver.NVDAResman(10.0.0)[53CC0E05-7382-336C-8239-AE884D6CA71A ]@0xffffff7fa3f80000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000023000000
Kernel text base: 0xffffff8023200000
__HIB text base: 0xffffff8023100000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 242886238000
last loaded kext at 7305506356: com.apple.driver.AppleGraphicsDevicePolicy 3.7.7 (addr 0xffffff7fa5e9e000, size 45056)
last unloaded kext at 104051108832: com.apple.iokit.IOEthernetAVBController 1.0.3b3 (addr 0xffffff7fa4883000, size 28672)
loaded kexts:
com.avatron.AVExFramebuffer 1.7
com.parallels.virtualsound 1.0.27 27
com.avatron.AVExVideo 1.7
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AudioAUUC 1.70
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.GeForce 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.nvidia.driver.NVDAGK100Hal 10.0.0
com.apple.nvidia.driver.NVDAResman 10.0.0
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IOSurface 97
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro10,1, BootROM MBP101.00EE.B05, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: OWC Aura Pro rMBP, 480.1 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4Remove "Air Display" and see whether there's any change. If not, the logic board is faulty and must be replaced.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.
Maybe you are looking for
-
Data is not getting updated in DB table
hi all i am doing IDOC to jdbc scenario i am triggering idoc from R/3 and the data is going into DB table sender side: ZVendorIdoc receiver side: DT_testVendor Table tblVendor action UPDATE_INSERT access 1:unbounded
-
WSUS and Office 2013 Home and Business
Hello all, I've actually set up Microsoft MDT 2013 to deploy OSes and Application for my company. This includes Office 2013 Home and Business (Click-2-Run version). I've downloaded O2013 media with Office Deployment Toolkit, customized it to be deplo
-
Launch Java App from Windows Desktop
What's the best way to launch a Java application from a Windows XP desktop without the console showing?
-
ASE - Started filling free space info for database
Hi All I have an ASE db that is in a RECOVERY state. This the last communication in the log: Started filling free space info for database 'BWP' Does anyone know what this means? There is a SAP BW running on ASE 15.7. I am an SAP consultant working on
-
I was having trouble with my Facebook App, so I deleted it and then tried to download it again. Everytime I try to download it, the screen just goes blank and nothing happens. Does anyone know what the problem might be? I have a Curve 8330, with v