GT70 0ND492 WLAN or Sbar issues

I have been having an issue with fn+f8 and radio buttons used to turn wifi on/off. Currently my wireless card is on and connecting, but it can't be turned off.
It also seems like the bluetooth refuses to be turned off as well. I have tried installing .NET 4.5, uninstalling and re-installing Sbar and the problem persists.
So far support has suggested that I return it for replacement, but if there is a solution for this problem I would rather fix it and not have to go through the hassle
of shipping this one back and then waiting on another one. I have been reading through other forum posts, but it seems most of those have to do with WLAN connection
issues or a card that will not turn on. My apologies if I've overlooked a topic that already exists on this issue.
Here are the relevant laptop specs that I can think of:
GT70-OND492
OS: Windows 7 Ultimate
Processor: i7 3740
GPU: nVidia 675mx
WiFi card: Killer 1202
BIOS: E1762IMS.50T
EC Version: 1762EMS1 Ver5.03
Thanks

Just an update here. I am now a very happy camper! The issue has been resolved successfully, the radio buttons as well as fn+f8 works as intended now.
For others who may be having or may have the same issue I will list what steps were taken to correct the problem.
First: installed .NET 4.5
Second: uninstalled and then re-installed Sbar
Third: Attempted to reset EC
Fourth: Flashed EC for Windows 7 w/ backlit keyboard
It seems that when the vendor installed Windows 7 the EC for Windows 8 remained. I cannot say for sure that the first through third steps did not also
play a part in the issue being resolved, but I believe it makes more sense that the wrong EC was the culprit all along.
Anyway thank you very much for the replies (speedy ones at that) 
Hopefully anyone else that has this same issue will find this post helpful.

Similar Messages

  • GT70 2PC - WLAN problem

    Good day,
    I recently bought a GT70 2PC with the following specs:
    processor: i7 4810MQ 2.8 GHz
    RAM: 8GB
    graphics: Nvidia GTX870M
    Ethernet: Killer e2200 Gigabit ethernet controller
    WLAN: Killer Wireless-N 1202 Network adapter
    The problem:
    I connect to the internet via wireless. When I play specific games I experience lag spikes (latency not FPS). Specifically League of Legends. I experience 30 ping constant, and then every 1-2 minutes it jumps to 500+ for 2-3 seconds and then goes back down. It is extremely frustrating. I tried playing Diablo 3 and didnt experience this, so I think it might possibly be specific to League of Legends. Just to note again, I have 100+ FPS constant, its not a graphics problem.
    The troubleshooting ive already done:
    This is not an issue with my fiber optic internet connection. I connect the laptop via ethernet cable and then the problem doesnt occur. I also used to play on my old laptop on the same internet connection without the lag spikes via wifi. I game far from my router so getting a cable is not a good solution, I paid an arm and a leg for this laptop I should be able to play on wifi if I want to. This also cancels out that it may be any other software causing the issue, its a fresh install in any case.
    There is a sticky post called How to fix issues with Killer Lan/WLan. I followed the steps and currently do not have the Killer software installed, I only have the drivers installed. However, this did not help at all. I did this procedure 3 times out of desperation. Did not work for me.
    I contacted MSI support. They told me to update my graphics drivers after I made it clear this is a latency issue. (I updated the graphics drivers the day I got the laptop in any case.). I responded to there feedback but they are taking long to get back to me, I am really hoping someone on this forum might be able to help.
    I checked resource monitor and also used software called Process Monitor to log all CPU and network usage while I was playing. The lag spikes were not visible in this data to my knowledge.
    I tried toggling bandwidth control on and off when I still used to have the Killer software installed.
    My thoughts:
    The fact that there is a post about people having issues with the Killer WLan makes me think that the wireless network adapter (or its drivers) are definitely the problem. However, after trying the fix in the sticky post and it not working makes it feels quite hopeless at this point. I do have the latest drivers installed. I feel like my only option is to wait for new drivers to be released and just hope that its fixed in the new drivers, but who knows how long that will take. Im thinking of sending the laptop back to where I bought it from but if this is a known issue affecting all laptops, id probably have the same problem with a replacement. Any advice on this would be greatly appreciated.
    Thanks in advance!

    Hi Svet,
    Thanks for the link but unfortunately it did not solve the problem. According to device manager the driver version has gone up to 10.0.0.287, but the lag spikes are still exactly the same.
    Further, I installed a game called Day of Defeat, to test if this is a problem specific to League of legends or if its a general problem. I have the lag spikes in Day of Defeat as well so its not game specific.
    Do you think it could be the Killer Network software causing this? Again I tried with bandwidth control on and off. Is there any way I could get these drivers without the Killer software or do you have any other possible solutions I can try?
     

  • Re: GT70 2PC - WLAN problem

    Re: GT70 2PC (Dragon Edition) - WLAN problem
    I am experiencing a problem with LAN rather than WLAN, it as not worked since I bought the Notebook in September. Microsoft support spent over 6 hours trying to assist. The driver is downloaded but not picki...

    Good call.  More problems kept popping up with even more usb ports.  I RMA'd it with newegg and just got the new board and installed it.  Working great so far.
    So anyone who finds this post, if you are seeing these type of issues, definitely don't w...

  • Nokia E72 WLAN Home Network Issues After SW Update...

    Hi,
    I just updated my software recently to the most recent update, and until doing so, I was able to connect to my home WLAN network. Now that I've updated the software, when I try to access the internet from my network, I get an "Invalid server" error on my browser. I have attempted to delete the access point, but I don't know if this is the right idea, and, so far, it has not resolved the situation. 
    I can, however, still connect to my provider's internet services, and proceed as normal. 
    Can anybody help me with this issue?
    Thanks.  

    @katelouise
    Although you would need to backup essential data first, try resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user); satisfy yourself that WLAN access working before restoring contacts and messages, but you may need to avoid restoring "Settings"!
    Happy to have helped forum with a Support Ratio = 42.5

  • WCS - WLAN Scheduled task issue

    I am using WCS to control our 5508 wireless appliance. We currently have 2 WLANS that are active..One of them is a guest WLAN that
    I use 2 scheduled tasks. One task is to disable this WLAN every night after 6pm and the other task is used to re-enable the WLAN at 6am every morning.
    When it works it works well. However over the last 2 months there has been at least 3 - 4 times where WCS does not re-enable this Guest WLAN..which of course causes ALOT of support calls to be placed.  I upgraded WCS to latest version..Any ideas on what could be causing this issue ?
    Cheers
    Dave                

    Thanks for the input everyone...I tried adding a 2nd re-enable task 10 mins later and that didnt work..So after doing a bit of looking around..I noticed I could view the history for each task and it shows me the success or failure with a description of why it failed..Looks like I am losing connectivity to the 5508 controller from the WCS server when the task tries to run. Right now I am trying to find out when the WCS server is being backed up..its possible that the backups are happening at the same time and are affecting this process.
    More to follow
    Cheers
    Dave

  • TX WLAN/GPU Nvidia Issue

    My laptop ran into the dreaded nvidia heat issues, and I applied the penny fix and she's now running again.
    However, when I first booted up after the fix, my Broadcom WLAN NIC worked fine, but the next day, it was gone again.  I'm left wondering, since the card obviously was't burnt up b y the NVidia chip (since it worked for awhile), why the WLAN always suffer before the entire PC dies in all these NVidia chip cases?  It seems rather odd.  My only guess is that the NVidia chip also serves as the Northbridge in addition to the GPU, and thus when all the soldering starts to go, it's unable to accomodate the WLAN anymore.  I ask since since I didn't heat up the underside of the board like most tutorials advise, so I think the soldering is still poor in my case.  (in which case I;d have to do this fix again!) :\

    The WLAN going out is usually a symptopm of the GPU issue. Most likely there is nothing wrong with your WLAN card and the fix just was not done properly. This happended to me the first time I applyed the fix also but It the reoccurance was not as fast as 1 day, I would recommend that you use the copper shim rather than the penny and if you don't have the tools or professional know how to do it on your own to take it to someone who works on motherboards. The cost for this repair is usually under $100 (/i would not pay more). There are also eBayers that provide the service and you can mail your board in if there is not anyone local to you who can do it for you. Make sure you check the feedback and go with someone reputable. I hope this helps

  • WLAN 4400 - Trunking issue

    Hi all,
    We are having an issue setting up a truck port for the 4400 to our 2950 swithes.
    The setup will work fine without vlan tagging. The WLAN controller can ping the switch and our network.
    When I configure trunking on the switch, the connection drops.
    I have configured the Gi 0/2 port with the below commands
    interface gi 0/2
    Switchport trunk allowed vlan 1-10
    switchport mode trunk
    No shut
    Modifying the WLAN 4400 I set the management interface tagged for vlan 2.
    This breaks the connections between the WLAN controller and the switch.
    Can you advise where I may be going wrong and how to rectify.

    Hi fella5 :
    First , Thx your idea.
    All vlans configured to the switch and all the Layer3 interface configured for each one .
    DHCP scope work fine .
    The PC client can associate to the AP successfully when i change the interface to other vlan at WLAN interface.But the AP group just not work.
    by the way , would you mind tell me how i can assign the ap group to each radio ?

  • WLAN AP group issue

    Hi all:
    I just set up 10 vlan interface and 10 AP groups for each vlan by only One SSID.
    But it's didn't work for me.All the client cannot get IP and even prompt a wep key enter .
    I set up something as below :
    1.set up AP group and assign vlan interface and SSID to each ap group
    2.Assign the AP group to each AP i want.
    3.Set up 1 SSID and use the managment interface.
    I don't know what step i miss or anything wrong with me .
    anyone have any ideal , please tell me .
    Thanks a lot!

    Hi fella5 :
    First , Thx your idea.
    All vlans configured to the switch and all the Layer3 interface configured for each one .
    DHCP scope work fine .
    The PC client can associate to the AP successfully when i change the interface to other vlan at WLAN interface.But the AP group just not work.
    by the way , would you mind tell me how i can assign the ap group to each radio ?

  • N97 mini WLAN/Data access issue

    Most of the time I will have WLAN access. So I do not want to pay extra for the data pack from AT&T. Just wonder if there is a way to turn off data access on my phone so the phone will used for phone call only, and not for data servies. TIA!

    you can do this in 2 ways:
    -if you don't want it anymore forever, you can openmenu = settings = connectivity = destinations = and delete intenet and wap access points except the WLAN access point ((leave MMS because you'll need it when recieving MMS))
    ** you can make the WLAN access point the first when you enter detinations = internet = choose the WLAN access point = options = organise change priority
    -or, you  can go to menu = web = options = settings = general = access point = ask when needed
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

  • VWLC WLAN creation profile issue

    Hi,
    I`m implementing a virtual wireless LAN controller and I`m getting problem to create WLAN profile. Follow the logs:
    *spamReceiveTask: Jan 22 11:42:50.510: #LWAPP-3-WLAN_ERR2: spam_lrad.c:52448 The system is unable to find WLAN 1 to be deleted; AP XX:XX:XX:XX:XX:XX
    *emWeb: Jan 22 11:42:50.501: #LOG-3-Q_IND: spam_lrad.c:52448 The system is unable to find WLAN 1 to be deleted; AP XX:XX:XX:XX:XX:XX[...It occurred 3 times.!]
    Any idea?
    Thanks,
    Rodrigo

    Hi,
    I`m implementing a virtual wireless LAN controller and I`m getting problem to create WLAN profile. Follow the logs:
    *spamReceiveTask: Jan 22 11:42:50.510: #LWAPP-3-WLAN_ERR2: spam_lrad.c:52448 The system is unable to find WLAN 1 to be deleted; AP XX:XX:XX:XX:XX:XX
    *emWeb: Jan 22 11:42:50.501: #LOG-3-Q_IND: spam_lrad.c:52448 The system is unable to find WLAN 1 to be deleted; AP XX:XX:XX:XX:XX:XX[...It occurred 3 times.!]
    Any idea?
    Thanks,
    Rodrigo

  • MSI GT70 DRAGON EDITION Graphics driver issue

    hi,
    i purchased a MSI GT70 DRAGON EDITION wich came with an Arabic version of windows 8 (purchased  in saudi arabia).so yesterday i did a clean installation of windows 7 64 bit Sp1 and for my bad luck my 4GB graphic card was not running.i checked in device manager it shows 2 graphic cards one of it is the onboard Intel graphics 4000 and the other one was just vga. i tried installing all particular drivers for it but it says graphic card not supported.
    please help me out with this.
    regards,
    robin

    Quote from: raywww on 30-December-12, 12:27:21
    thanks guys.
    now i can see both the Intel hd 4000 & nvidia gtx675mx in device manager.
    now i would like to know how to switch to nvidia .i tried disabling Intel but then both graphics cards are not working.
    please guide me .
    in nvidia control panel it shows the laptop display is connected to the intel HD4000 how do i move it to nvidia.
    regards ,
    rob
    What exactly do you mean? Like when you want to play a game? You need to open up the NVidia control panels, go to "Manage 3D Settings", and then in the right most pane, click on the "Program Settings" tab. In there, you need to add each game/program you want to use the NVidia adapter with when it runs. This allows you to only use the NVidia adapter when you're running programs that require that graphics card. Very neat, and cool feature.

  • MSI GT70 0ND-444US dreaded GPU issues

    Hello guys, so i've had my 0ND-444US for about two years now and within the last 6 months i've been getting BSODs (GRAPHICS_DRIVER_TDR_FAULT) when trying to game (nvidia 675m). I've formatted windows, re-pasted gpu heatsink, and tried different drivers with the same result everytime. I've done some research and it sounds like these should've been recalled by MSI as a lot of people have this issue.
    My question really is...What are my options? Do I take a $300-$400 gamble on a GPU upgrade? Do I try to repurchase the same junk 675m card?
    Here are a couple of my dmp files:
    Code: [Select]
    VIDEO_TDR_FAILURE (116)
    Attempt to reset the display driver and recover from timeout failed.
    Arguments:
    Arg1: ffffe0005ec684d0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
    Arg2: fffff801119cc608, The pointer into responsible device driver module (e.g. owner tag).
    Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
    Arg4: 0000000000000004, Optional internal context dependent data.
    Debugging Details:
    FAULTING_IP:
    nvlddmkm+9a3608
    fffff801`119cc608 48ff258159edff  jmp     qword ptr [nvlddmkm+0x878f90 (fffff801`118a1f90)]
    DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_TDR_FAULT
    CUSTOMER_CRASH_COUNT:  1
    BUGCHECK_STR:  0x116
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
    STACK_TEXT: 
    ffffd000`7cd50a78 fffff801`109f8fac : 00000000`00000116 ffffe000`5ec684d0 fffff801`119cc608 ffffffff`c000009a : nt!KeBugCheckEx
    ffffd000`7cd50a80 fffff801`109ed08d : fffff801`119cc608 ffffe000`6078cbb0 ffffe000`5ec684d0 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
    ffffd000`7cd50ac0 fffff801`109ed582 : ffffe000`6078d240 ffffd000`7cd50b20 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
    ffffd000`7cd50af0 fffff801`109f8919 : ffffe000`5fd30100 fffff801`10acbe78 ffffe000`5ec72c70 ffffe000`5fd33000 : dxgkrnl!DXGADAPTER::Reset+0x416
    ffffd000`7cd50b60 fffff801`10ae4fde : fffff801`10acbc90 ffffe000`5fd33000 fffff801`6188f000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
    ffffd000`7cd50b90 fffff801`10acbd1d : ffffe000`5fd33000 00000000`00000080 ffffe000`613d3500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
    ffffd000`7cd50bc0 fffff801`6195e794 : ffffd000`7afd23c0 ffffe000`613d3500 ffffd000`7cd50c90 fffff801`619e637d : dxgmms1!VidSchiWorkerThread+0x8d
    ffffd000`7cd50c00 fffff801`619e95c6 : ffffd000`7afc6180 ffffe000`613d3500 ffffd000`7afd23c0 00000000`00000000 : nt!PspSystemThreadStartup+0x58
    ffffd000`7cd50c60 00000000`00000000 : ffffd000`7cd51000 ffffd000`7cd4b000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND:  .bugcheck ; kb
    FOLLOWUP_IP:
    nvlddmkm+9a3608
    fffff801`119cc608 48ff258159edff  jmp     qword ptr [nvlddmkm+0x878f90 (fffff801`118a1f90)]
    SYMBOL_NAME:  nvlddmkm+9a3608
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: nvlddmkm
    IMAGE_NAME:  nvlddmkm.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  539a4345
    FAILURE_BUCKET_ID:  0x116_IMAGE_nvlddmkm.sys
    BUCKET_ID:  0x116_IMAGE_nvlddmkm.sys
    ANALYSIS_SOURCE:  KM
    FAILURE_ID_HASH_STRING:  km:0x116_image_nvlddmkm.sys
    FAILURE_ID_HASH:  {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
    Followup: MachineOwner
    Code: [Select]
    VIDEO_TDR_FAILURE (116)
    Attempt to reset the display driver and recover from timeout failed.
    Arguments:
    Arg1: ffffe00060d3b4d0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
    Arg2: fffff800ce852608, The pointer into responsible device driver module (e.g. owner tag).
    Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
    Arg4: 0000000000000004, Optional internal context dependent data.
    Debugging Details:
    FAULTING_IP:
    nvlddmkm+9a3608
    fffff800`ce852608 48ff258159edff  jmp     qword ptr [nvlddmkm+0x878f90 (fffff800`ce727f90)]
    DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_TDR_FAULT
    CUSTOMER_CRASH_COUNT:  1
    BUGCHECK_STR:  0x116
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
    STACK_TEXT: 
    ffffd000`23312a78 fffff800`cd92cfac : 00000000`00000116 ffffe000`60d3b4d0 fffff800`ce852608 ffffffff`c000009a : nt!KeBugCheckEx
    ffffd000`23312a80 fffff800`cd92108d : fffff800`ce852608 ffffe000`62399010 ffffe000`60d3b4d0 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
    ffffd000`23312ac0 fffff800`cd921582 : ffffe000`623a4540 ffffd000`23312b20 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
    ffffd000`23312af0 fffff800`cd92c919 : ffffe000`625b0100 ffffffff`fffe7960 ffffe000`61266010 ffffe000`625b4000 : dxgkrnl!DXGADAPTER::Reset+0x416
    ffffd000`23312b60 fffff800`ccc5afde : fffff800`ccc41c90 ffffe000`625b4000 fffff800`8fa1e000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
    ffffd000`23312b90 fffff800`ccc41d1d : ffffe000`625b4000 00000000`00000080 ffffe000`62bcb880 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
    ffffd000`23312bc0 fffff800`8faed794 : ffffd001`8f73b3c0 ffffe000`62bcb880 ffffd000`23312c90 fffff800`8fb7537d : dxgmms1!VidSchiWorkerThread+0x8d
    ffffd000`23312c00 fffff800`8fb785c6 : ffffd001`8f72f180 ffffe000`62bcb880 ffffd001`8f73b3c0 2d6b6361`50656761 : nt!PspSystemThreadStartup+0x58
    ffffd000`23312c60 00000000`00000000 : ffffd000`23313000 ffffd000`2330d000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND:  .bugcheck ; kb
    FOLLOWUP_IP:
    nvlddmkm+9a3608
    fffff800`ce852608 48ff258159edff  jmp     qword ptr [nvlddmkm+0x878f90 (fffff800`ce727f90)]
    SYMBOL_NAME:  nvlddmkm+9a3608
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: nvlddmkm
    IMAGE_NAME:  nvlddmkm.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  539a4345
    FAILURE_BUCKET_ID:  0x116_IMAGE_nvlddmkm.sys
    BUCKET_ID:  0x116_IMAGE_nvlddmkm.sys
    ANALYSIS_SOURCE:  KM
    FAILURE_ID_HASH_STRING:  km:0x116_image_nvlddmkm.sys
    FAILURE_ID_HASH:  {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
    Followup: MachineOwner

    Quote from: SiddVicious on 22-September-14, 06:01:44
    Thank you for the recommendation for the 680m, I'll start looking into what it costs.
    Can my 1762 easily upgrade to the 680m?
    There shouldn't be a problem, As long as it's an MSI card. That's usually the 'tough' part. Many people buy the ones that claim they are "MSI/DELL/CLEVO", but they aren't always 100% compatible then. If you truly want it to work, and work well, I'd look into verifying without a shadow of a doubt that it is an MSI based card.

  • 5800 - WLAN web access issues

    Hi all,
    I have my 5800 connected to my Zyxel Wireless router to access the internet. I can browse and search to a certain point but some links don't go anywhere.
    For example, I can browse to the bbc.co.uk site and select sport to bring up the sport homepage, but then clicking on football does nothing.  Using 3G accesses the football page fine.
    Is there something on my phone or router I need to update?  The firewall hasn't got any rules which I have applied.
    Richie.

    Do you run into this issue with the same page every time?  I'm wondering if your wireless session is being disturbed by a phone or other device that's running at 2.4G, which I ran into once.
    Lumia 920, Lumia 800
    Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
    Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428

  • GT70 0NC-494 SATA 3 issue

    Hi guys,
    i have this laptop for almost an year and I'm tired of trying to fix this issue by myself. i installed a SSD (OCZ Vertex 4 256GB) on the sata 3 port and moved the HD to the SATA 2, but when i finished the windows installation the system got instable and restarted with less the 10 minutes (sometimes i can't even finish the windows installation).
    So i gave up and switch the drivers, SSD on sata 2 and HD on sata 3, works fine, but only with half speed. I already tried to switch the drivers after windows installation, but it gets instable the same way.
    All the firmware are up to date, such as the drivers and windows.
    What else can i do?
    I'm running windows 8 pro, pretending to upgrade to 8.1
    thank you a lot.

    Yes, nothing new so far

  • 5530 WLAN Webpage loading Issue

    Hi,
    A problem started recently that has not occured before.
    My phone can connect successfully to a WLAN point but when I try to access a page, whether new or from recently visited, it states it is "connecting via (wlan name)" but then cuts out and goes back to the previous menu.
    Furthermore if I select "options" from the "Bookmarks" option that also takes me back to the "Internet" menu.
    I have reset the factory settings, deleted the wlan access point and reloaded it, but to no avail.
    All help gratefully received.
    Thanks

    Seemed a bit drastic but it worked all but for one small, minor, thing.
    When I go to log onto the internet and web I'm not getting the option of connecting via the WLAN even though the modem is switched on, all that happens is that it goes straight on to my mobile networks WAP service.
    The WLAN can be seen and connected to using the Settings / Connectivity / Wireless LAN option but it would be good to be able to connect as before via the Internet / Web / Recently Visited Pages option.

Maybe you are looking for