GT70 2OC Bios update went bad, blank screen on boot

Hi,
I want to update my laptop's bios, model being MSI GT70 2OC - 065US. When I went to MSI driver download site, there were two different bios files for download.
Version 517 for UEFI None RAID SKU and version 717 for UEFI RAID0 SKU. My Laptop has one hard disk and other sata slot for hdd is empty. I am confused whether  which BIOS file should I use for my laptop. Please help.
Thanks.
UPDATE
I tried to update BIOS using version 517 file. I was following procedure given in pdf manual. I followed every step as per manual. Laptop asked permission to reboot as suggested in manual. But after reboot only blank screen is appearing and only fan is working, no other activity is there.
Kindly help.

Quote from: ajaymore2909 on 12-January-15, 02:26:50
Hi,
I want to update my laptop's bios, model being MSI GT70 2OC - 065US. When I went to MSI driver download site, there were two different bios files for download.
Version 517 for UEFI None RAID SKU and version 717 for UEFI RAID0 SKU. My Laptop has one hard disk and other sata slot for hdd is empty. I am confused whether  which BIOS file should I use for my laptop. Please help.
Thanks.
UPDATE
I tried to update BIOS using version 517 file. I was following procedure given in pdf manual. I followed every step as per manual. Laptop asked permission to reboot as suggested in manual. But after reboot only blank screen is appearing and only fan is working, no other activity is there.
Kindly help.
Power on/off your laptop. If the laptop does the same then you have to send it back for RMA.

Similar Messages

  • GT70 2OC BIOS UPDATE

    I have a GT70 2OC 065 - US
    With the version of BIOS E1763IMS.50C
    To upgrade to the latest version I file should I use?

    I do not understand this instructions :
    E1763IMS.51B:
    If your system BIOS version is E1763IMS.500 ~ E1763IMS.508, please must update BIOS to E1763IMS.50V before you update to the latest version E1763IMS.51X.
    E1763IMS.50V:
    If your system BIOS version is E1763IMS.500 ~ E1763IMS.508, please must update BIOS to E1763IMS.50V before you update to the latest version E1763IMS.51X.
    I have two SSD in RAID0
    Could I get some moderator help?

  • Satellite A85-s107 - blank screen on boot up using battery power

    Satellite A85-s107 blank screen on boot up using battery power
    When I boot up A85-s107 in battery power, it is getting booted up in the background, but my screen is blank.
    After that if I connect it to AC power and switch off/on the laptop power button, the display comes back to life.
    There is no problem when I boot up when connected to AC power.
    Battery is fully charged and computer will run off battery if I remove AC after boootup
    Any suggestions?
    Ps:
    also notice that when I remove AC and then reconnect I have to start the computer twice as it doesnt boot the 1st time?

    hi nick34_99,
    sounds to me like a bad charging electronic...
    i got this issue on my sat3000 too, but only when battery is not fully charged...
    start the unit with a dos-disc (freedos has an cd image) and let the battery run "dry"...
    after that boot without battery (ac-adapter connected of course) and log on.
    after that shut down insert battery and try with batt only....
    this trick has done magic on my machine...

  • T61 BIOS update locks up unit; will not boot

    I attempted to download and install (properly, in accordance with instructions) the latest BIOS update. The computer froze during the BIOS update process. It will not boot. This is the 2nd time the identical problem occured. (unit went in for repair in 5/08 the first time) The unit will not boot from the DVD reader. I cannot the repair CD nor can I load a BIOS CD. Suggestions?

    Welcome to the forum!
    I certainly hope that you have warranty leftover, otherwise you're likely looking at out-of-pocket system board replacement.
    Good luck
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • I have a HP TX2Z-1000. The HP assistant prompted for a BIOS updated & now I'm unable to boot.

    I have a HP TX2Z-1000. The HP assistant prompted for a BIOS updated & now I'm unable to boot. I let it go through it's process it shut down and now I'm getting post code indicating a CPU failure? Can a bios update fry the CPU?
    I've removed the batteries, 30 minutes later I attached the power cord and tried to boot with the same result. Can you shed some light on what maybe going on and how to fix it?
    Thank you!

    Can you get the exact error code?

  • Blank screen & no booting after running BIOS update on Satellite A200-1AE

    Here is my problem with my A200-1AE (PSAECE) Notebook:
    I downloaded the latest BIOS update from the Toshiba download drivers library to install Win XP since finally the drivers are realized. (Note the update clearly stated to run ONLY if you want to install XP on you NB).
    So I unzipped the file and after hitting the .exe file it started updating the BIOS on its own without me giving the liberty to do so. Half way the N/B froze for about 20 minutes and as I didnt know what else to do so I reset it.
    Result? The NB does NOT boot. I press the power button, the Hard Drive icon flashes 2-3 times as well as the DVD drive, I get a blank screen and the power cord & power button icons constantly on. I removed the battery and the power cord for 48 hours hoping it will reset the BIOS on its own to no avail.
    The BIOS battery is under the touchpad which means I have to disassemble the whole laptop and I am not ready to do so. I dont know if on the motherboard there are BIOS reset jumpers and I need someones help as to what I should do. I am starting to think that things where MUCH easier back to when I just had a desktop PC.
    THERE must be something I can do other that taking it to the service center and pay half the value of the laptop in repairs.... PLS HELP Im desperate....

    Hi there,
    first of all: a notebook is not a desktop and such mobile computer does not have jumpers like a deskop computer. They surely have something to delete the BIOS but I am not so sure IF resetting the BIOS could help you.
    I guess you will have to send your machine to a service center for repair because in such cases you will have no other option. Do you have still warranty on this machine?
    Greets

  • W510 bios update gone bad -- help please

    Just went through a montly (+/-) update process through System Update.
    Updated BIOS in my W510... along with a host of other things.. but from what I've
    read i fear its the bios.
    all went normally (as it always has).. machine rebooted after update.. stopped at the thinkpad
    splash screen.  Just hung there.  I left it all day (figured it was doing something?) came back
    at night, it was still hung.
    tried to force reboot.. i got two beeps.. then three beeps..   nothing happened.
    every time i pressed power button.. two beeps.. pause.. three beeps.
    took out batt / restared .. no screen.. HD spins / fan spins / power light is on.. but machine
    seems dead.
    Anyone have any ideas whats going on?  how to fix?  was it the bios update?  can it be rolled back?
    Thanks in advance

    Were you trying to use http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74858 ???
    If so, we bricked several machines at the beginning of April and asked Lenovo to remove the update.  I see that hasn't been done.  Maybe now they will.

  • Blank screen after boot - After update.

    Hello!
    I have the following problem with my arch dist:
    I recently  - and after several weeks without touching it - updated my arch but, after rebooting, the laptop screen went blank just after booting up. Using the fallback boot resulted in the same ... well.. result. This is as much as i can describe since i don´t know how to access a comand line in this context, in order to test/check what´s going on. Anyone can help me?
    Thanks

    Assuming you are using grub, you can edit /boot/grub/menu.lst when grub is loading, in order to force it to not boot into X. On boot, select your normal arch linux entry from to boot list (don't press enter) and type e to edit the menu.lst Press e again on the kernel line and append this number:
    kernel /vmlinuz26 root=/dev/sda3 resume=/dev/sda5 ro 1
    Press enter and then you boot it by pressing b. It is the number at the end that defines the run level, in this case 1 (single user). This will allow you to boot into console as root.
    Edit: I meant run level 1 (single user)
    Last edited by roygbiv (2011-06-24 20:08:01)

  • MSI GT70 2PC Bios update (Legacy mode)

    Hi!
    I've got a GT70 2PC notebook with Win7 64bits installed, and I want to update its BIOS.
    I've downloaded the last version (117 version, I think, because I haven't got RAID), but I couldn't update it, because its BIOS files are to UEFI Bios update, not the DOS version.... I haven't got the Flash.bat file to update it, only a file called "E1763IMS.117"...
    What should I do?
    Thanks a lot

    Greetings:   
    I need  help, i was updating the BIOS of my laptop msi gt70 2od-039us (dragon Editon2) WIN 8 then upgraded to 8.1  with this: E1763IMS.717.zip exactly as shown in pdf of site msi bios download.... I did step by Step, but in the step 12. BIOS info says: “System will power off and then power on automatically”…
    The laptop, goes off, then appears black screen, cooler spins but never enter in the flash screen.
    Please help me how i restart my laptop again, it’s possible or i need to buy a new motherboard?
    Thanks.
    PD: I unplugged the battery CMOS and turn it on but still is in black screen. PLEASE HELP!!!!

  • Pavilion g6t wont boot after bios update now just black screen please help!

     I downloaded an update for the bios for my pavilion g6t-1d00 laptop running windows 7 64 bit. It started acting kind of funny but I didnt think anything of it til I tried to boot it up the next day and all I got was a black screen and a orange led light on the f12 button for the internet and the caps lock button after blinking afew times started the dredded two times every couple of seconds. I tried the windows key+B key power key, no luck. I cant access anything because I have no monitor and I'm at my wits end. I refuse to wipe my hard drive and start over even if I could! I cant access hp tools or manager or anything, please someone has to have a solution!

    @Fuschia4me,
    1.       You will have to use another computer
    2.       Access the HP.com site with the BIOS updates available here is the link
    3.       You want to select the F.36 BIOS version
    4.       When you click on the update then click download and it will ask you to save or run, you want to save to a flash drive
    5.        Once done insert the flash drive into your laptop
    6.       Turn the computer on and press the windows and B key like before
    If the process doesn’t work the first time I would try at least 2 more times.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • After bios update, lights come on, screen does not

    I installed the only bios update on the dv9610us page, and now my laptop boots to a black screen. The hard drive has been wiped and windows 8 was installed, so no recovery partitions are there. I did take out the hard drive and get the bios backup that the bios installer made, but I have no idea how to get the backup restored without an hp_tools partition

    Hi @josephsmendoza ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv9610us Notebook and issues with System recovery.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
    Here are some options available using HP Recovery Manager that might help you out.
    Did you make a recovery disk for the Original OS?
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • App Store updates gives a blank screen

    Opened App Store app and selected update. Alligator is blank screen.  The other choices, featured, etc seem to being fine.  I tried a shutdown, restart.  Problem continues.  Notei have same problem on iPad and iPad mini.  Don' t dare try on iPhone

    There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
    http://www.apple.com/support/systemstatus/

  • Bios update gone bad

    I have a T60 and I just tried to update the BIOS using the following utility from Lenovo:
    Version:                  7IET33WW (1.14)
    Release Date:        2008/04/25  
    File link                   7iuj12us.exe   
    File size                  2,781,304
    File description     ThinkPad BIOS update utility
    After the utility completed the update, I followed the instructions to restart and verify the version.  After hitting F1, I am presented with a lock icon which has a screen beside it, which I believe to be a prompt for a power on password.  Not knowing what it is since I never had one set up, I try my windows password and that of my wife's which we use on the computer (set up when we set up the fingerprint log -in).  Nothing works.  I can hit enter and access the BIOS setup, but no changes can be made in "user mode" (I never set up a Supervisor password either).  
    I did read/try the solution which Mark_Lenovo (Admin) posted in other threads regarding removing the battery and backup battery, but it did not work.  What is funny is that the power on password is only requested when trying to access the BIOS, I can log on and use the computer normally with the fingerprint reader.  I just can not access the BIOS.  
    I am hoping others who had similar problems might have had better guidance on how to proceed.  My initial call to Lenovo proved to be less than comforting stating that even the POP can not be reset and can only be fixed by MB replacement at my cost.  
    Thanks in advance for any help.
    System is a T60, type 8743, WinXP, T7200, 2Gb, current BIOS after update 1.14 (7IET33WW) dated 2008-04-16, Embedded Controller Ver 1.07, old BIOS version unknown, system build Dec 2007.
    Calvin

    Calvin, welcome to the forum,
    I'm sorry; this subject is not allowed to be discussed here as stated in the forum rules - Thread locked
    No posts shall include instructions or directions intended to subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc, nor shall any posts provide descriptions to the location of, nor direct links to content related to these topics.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Thinkpad Edge E530 BIOS Update went wrong

    I was updating BIOS using the utility given in Lenovo site. But it went wrong and my E530 is bricked. I'm planing to recover the BIOS using Phoenix Wincrisis .. But for that i Need the bios.wph file. I tried to extract the .wph file (using 7zip) from the Bios update .exe file given in lenovo site .. But I Cant find a .wph file in it.. It contains a [0] file.. Tried to extract that '[0]' file using 7zip. But 7zip cant open the archive. My E530 is still bricked .. Someone please help me as soon as possible. Thanks in advance

    Hi Yasarharafath,
    I am sorry for the delay in reply!
    I am glad to hear that your system is now booting after using Phoenix Wincrisis Tool. But for this new issue suggest you to check with uninstalling ACPI adapter from the device manager. Remove the battery from the system & power on the system from connecting ‘Power Adapter’. Wait till the system boot completely and then go to ‘Device Manager’ then uninstall ‘Microsoft ACPI-Compliant Control Method Battery’ under battery option. After uninstalling shutdown the system, remove ‘Power Adapter’ and insert the battery then switch ON the system and check.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • In iphone 4 ios6.1 apps are not updated the white blank screen is coming

    Hi team,,
    I am using iphne 4 ios6.1, but i am not able to apps.. when i got to the aApps option and click the white blank screen is coming
    Plz suggest
    Regards,
    luv Sharma

    I do not think that is possible in SSRS, if you are lucky someone from  the MS  will jump in and provide a solution if exists one.
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

Maybe you are looking for