GT70 2OD latest firmware

i need your assistance again Svet
gt70 2OD
BIOS E1763IMS.50W
EC Version 1763EMS1 Ver5.13
EC Build 03/07/2014
cpu i7-4700MQ
video card gtx 780mx
fully unlock
paypal confirmation  4PG87833YE9835910

received it, check PM for next steps

Similar Messages

  • GT70 2OD downloads bios driver firmware

    i have GT70 2OD-019US
    i tried to update my graphic card driver from  http://www.msi.com/product/nb/GT70-2OD.html#download
    it didnt work it said not compatiable
    im using latest beta driver from nvidia webiste
    you guys have right stuff on the website
    there is so much variation i didnt see GT70 2OD-019US link so i guess i could use downloads from GT70 20D
    maybe im wrong
    download was hard to find and stuff not working
    support sucks

    Quote from: spacealien on 17-September-13, 04:21:57
    im confused just as you are.
    I like to keep my stuff updated to the latest so i went to nvidia website
    download the driver for geforce gtx 780m
    i tried to install the driver but it wont let me install cuz it's not compatible with my card
    so i went to the link above download the oem graphic card driver which im not too clear it's right one for my laptop
    cuz it's doesn't say gtx 780 it says something like nvidia n14 chipset i have no idea what it mean
    i installed it cuz that's all i can find for my laptop. it let me install but my geforce card doesn't work
    my laptop switch over to intel graphic card and my nvidia card has red x on it under device tree
    fortunately i found the latest beta nvidia work on my laptop otherwise i could ended up with non working video card 
    the title
    all the downloads im not sure they are right stuff for my laptop
    i updated bios, firmware, and some of the driver
    they are working so far i haven't found any problem with them
    the graphic card driver make me think that maybe the stuff i updated might not be right for my laptop
    im confused with many gt 70 series
    http://www.nvidia.com/object/notebook-win8-win7-64bit-326.80-beta-driver.html
    Try that driver.
    The problem with the 320.49 'release' drivers is that they don't include the proper information to work with the newer GTX7XXM video cards on MSI laptops. You need to download the latest beta drivers, as they have the proper information to work. The next release, whatever that might be, should work just fine then.
    As far as the other drivers...
    http://www.msi.com/product/nb/GT70-2OC.html#download
    should have all the drivers you need. You can try going to the individual manufacturer website to update them too, such as Intel for the Intel iGPU.

  • GT70-2OD BSOD after BIOS /EC update

    Hello all,
    I was having wireless disconnect issues with the Killer N1202. I had changed a couple of my wireless router's settings and updated to the latest Killer drivers / network manager and turned off the application monitoring. I still had the disconnect issue.
    In my zeal to fix the problem, I decided to flash the BIOS and EC firmware. The notebook is the GT70-2OD (1763) RAID, full color backlit keyboard, Windows 8 64-bit so these are the files I used to flash:
    BIOS - w8_E1763IMS.70E.zip - flashed with EFI_Boot process
    EC firmware - w8_1763EMS1.505.zip - used winflash in Windows 8 - made sure i closed as many apps as I could beforehand.
    Followed the flashing instructions to the letter. After each flash, disconnected the AC and removed the battery for no less than 5 minutes.
    When I booted the notebook back up, I got the BSOD - VIDEO_TDR_FAILURE (igdkmd64.sys) when I tried to log in to Windows. At that point, had to go into safe mode and disable the Intel graphics driver. This allowed me to log in. I then tried updating the Intel graphics driver to the latest Win8-64 version. Still got the same BSOD at login.
    With even more zeal, decided to rebuild to the factory Windows installation with the MSI recovery.  It pulls up the initial config screens in Windows, but still the same BSOD. Can't even get to safe mode now or get past the configuration screens. Safe mode isn't an option either. Windows throws an error that it cannot enter safe mode because setup has not completed. So much for zeal.
    Just looking for some suggestions.
    Is there a way to roll back the EC and BIOS? If I can, and if it's even advisable at this point, where would I find the older versions? The product and download sites only list the most recent.
    Thanks for any help on this.

    I haven't tried any different drivers other than the ones I mentioned in my post. I will try a fresh install of the OS and go from there. Ran the memtest86+ util for three passes and the memory looks good. Unfortunately, I didn't record what versions of the previous EC and BIOS.
    I will post the results of the fresh OS install soon.
    Thanks
    George

  • GT70 2OD 4700MQ GTX780M search Unlock Bios

    hi
    German
    I am looking for a BIOS  unlocked.
    I have a msi GT70 2oD 4700mq gtx780m.
    Bios w8_E1763IMS.70J Currently
    EC Firmware Currently w8_1763EMS1.505
    thank you in advance

    Hello,
    i can start work over it, once donation is received: https://forum-en.msi.com/index.php?topic=134259.0
    and to send back to you when its done, 2-3 hours later

  • MSI GT70 2OD Nvidia Drivers

    Is there a reason why MSI GT70 2OD owners are unable to upgrade to the latest Nvidia Drivers for their 780M?
    Other brands with the 780M seem to be able to upgrade (Alienware, Clevo etc), but the drivers won't work with the MSI Laptop.
    Will we only be able to get drivers from MSI for this laptop, or in the future will we be able to install drivers from Nvidia?

    Quote from: Svet on 04-July-13, 18:49:08
    nvidia should add support for MSI's as well with next updates.
    Svet is 100% accurate with this.
    When the GT70's originally came out with the GTX6XX cards in them, they didn't have support from NVidia for a few driver releases. I expect that within the next few driver releases, support will be added.
    Most likely, it should be possible to make the new drivers work if you did some INF editing though.....

  • GT70-2OD/2OC/2PE/2PC/GT60 EC mod to use 240w AC adapter?

    Hello,
    I have searched high and low to see if someone has come up with a solution for this. These MSI gaming laptops have 'NOS' where it sucks power from the battery when power consumption approaches 180 watts. This can be very annoying if you have an overclocked Haswell extreme CPU and a 780m or 880m GPU both number crunching @ 100% concurrently and for extended periods of time. It cannot be sustained because the battery will drain down. The GT70-2OD Dragon laptop review on tomshardware goes over this in detail.
    Is the limitation set in the firmware of the EC or BIOS to allow the laptop to suck more than 180 watts from it's DC jack? 240 watts would be perfect but also there are the voltage regulators and power lines to think of, what they are rated for.
    But I'm wondering is there a definite solution to allow more than 180w or is that still in the research phase? As the Extreme CPUs get cheaper more people would want that mod.
    Asus and Alienware did it right with 240W AC adapters, don't know why MSI cheaped out with 180w.
    Thank you

    Hello,
    I have searched high and low to see if someone has come up with a solution for this. These MSI gaming laptops have 'NOS' where it sucks power from the battery when power consumption approaches 180 watts. This can be very annoying if you have an overclocked Haswell extreme CPU and a 780m or 880m GPU both number crunching @ 100% concurrently and for extended periods of time. It cannot be sustained because the battery will drain down. The GT70-2OD Dragon laptop review on tomshardware goes over this in detail.
    Is the limitation set in the firmware of the EC or BIOS to allow the laptop to suck more than 180 watts from it's DC jack? 240 watts would be perfect but also there are the voltage regulators and power lines to think of, what they are rated for.
    But I'm wondering is there a definite solution to allow more than 180w or is that still in the research phase? As the Extreme CPUs get cheaper more people would want that mod.
    Asus and Alienware did it right with 240W AC adapters, don't know why MSI cheaped out with 180w.
    Thank you

  • GT70 2OD Random BSODs

    Hi,
    I have a new GT70 2OD 058au (less than 2 weeks old).
    I ran updates the day I received the computer which included updating to Windows 8.1. I have been getting BSODs randomly most days since I got the computer, sometimes with different codes and while doing different tasks.
    I have updated all the drivers I can through Windows (have not done firmware, Bios or the F6 IRST)
    If anyone could help me with why this might be happening it would be greatly appreciated.
    please message me if you need minidump files, I guess I am not supposed to add links in here.
    Thanks in advance.

    Hi,
    Sorry for the delay, fairly busy as the moment so not getting much of a chance to check on here.
    BSOD errors have been a few different ones. I cant remember off the top of my head.
    I have a zip file on skydrive with driver list and minidumps etc..
    I know im not supposed to put links on here, but I cant seem to find a way to upload the info. So I do apologize for this, but Im not capable of looking into the code stuff to be able to help you help me.
    https://           skydrive.live.com/redir?resid=A1DE69ABC6D90B97!171&authkey=!ALht0PLg0PwxFe8
    Thanks for taking a look into things for me, I really appreciate it.

  • My macbook pro screen remains grey after latest firmware update

    i just had the update notification for the latest firmware, proceeded to do so, and the screen remains grey, its been more than one hour and still grey, since its a firmware update i don't want to disturb it, but could it be that is taking so long?

    Reboot it by pressing the power button down hard to force a shutdown.
    If your still having problems, take it to Apple. I hope you have AppleCare becuase if they can't fix it, it's a new logicboard.

  • HT3728 Does factory reset go back to latest firmware update.

    I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    I have since then tried to do factory reset several times without getting the device up and running again.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    I have not been able to discover the express from my iPad, iPone or iMac again.
    Could the reaons be latest firmware update?
    Any advice to get it back to normal?
    Thanks,
    Per

    Does factory reset go back to the latest firmware update.
    A Factory Default Reset will not affect the installed firmware.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
    I have since then tried to do factory reset several times without getting the device up and running again.
    The AirPort Express has failed, and will need to be replaced.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    This is yet another confirmation that the Express has failed, and will need to be replaced.

  • Internet stopped working on MBA after latest firmware update. Help please!!!

    Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
    Any ideas?

    FIXED.
    I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

  • Attempted Iphone 4 update to latest firmware update "failed"

    Ive attempted to update the Iphone to the latest firmware update  and it has failed 3 times, the final time it looked as though
    it worked but stopped and went into new mode to go-back to Restore to old  setting. Now it is locked up and asking me for the  admin backup password
    and everything I've tried is not working..  Not sure what to do at this point.
    The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
    I'm  open to any ideas at this point.
                Thanks Artman

    Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
    Open a Command window and type the command "netsh   winsock   reset"
    Reboot your computer
    Disable your antivirus and firewall
    Launch iTunes
    Connect the phone using a USB port directly on the computer, not a hub
    When the phone is recognized in iTunes click on it, then click Restore
    If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
    If the update completes you are in business
    You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

  • Zen Touch latest Firmware Update...player not connec

    I tried installing the latest Firmware update for my Zen Touch (released 2-09).
    The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
    I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
    So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
    I have made a firmware update before, which worked fine. After that I updated the media explorer software.
    Help is very much appreciated! Thank you in advance.
    -tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

    Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
    Are you trying to upgrade to the .0.03 version?

  • TC issues after latest firmware update

    Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

    Need some more info.
    What is the modem.. make and model?
    Is it both modem and router or just a modem?
    What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
    The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
    But it does seem hard to get rid of properly.
    I want you to do a factory reset not just a hard reset.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
    eg TCgenx (use actual gen if you want) for base station name.
    TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
    Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
    Tell us what OS the computers are running and I can tell you how to install the old airport utility.
    Test the TC in bridge to your other router is also a good alternative.

  • Latest firmware update and startup problems

    Hi I have been reading all about this so-called firmware and its importance in keeping updated on my new macbook pro. Therefore I have been diligently trying to keep it updated over my dial-up connection. I installed the latest firmware as my automatic update suggested. Now I get the spinning startup circle of death. Tried booting in safe mode to no avail. Help? (I also have version cue installed.)

    Hi jbell,
    Firmware updates are not availible in Software Update, only sofware updates are. Did you Repair Permissions prior to and after updating software? You always should. Go to Applications-Utilities-Disk Utility, and highlight Mac OS X in the left hand column, then Repair Permissions below. Firmware updates are available here....
    http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html
    http://www.apple.com/support/downloads/macbookpro15inchsmcfirmwareupdate.html

  • Mid 2006 iMac Boot Problem (Since latest firmware update)

    I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
    Any help would be appreciated.
    Thanks!

    Actually, I think it'san early 2006.

Maybe you are looking for