GT70 2PC: 870M does not activate, benchmarks and performance ingame confirm this

I bought myself a GT70 2PC Dominator (the SSD version) with an 870M inside, and after starting several games, checking benchmarks and comparing framerates to my current desktop machine (which has an i5 2500K and a GTX 770), I find that, even after configuring the machine to prefer the "powerful Nvidia processor", and setting all games to use the Nvidia processor, it still uses the 4600 processor. I'm getting rather low framerates, I'm not hearing any fan speed increase, Benchmarks ingame like the one from Sleeping Dogs still report the 4600 GPU and some games won't even boot up properly (like Just Cause 2). I did configure all the games to use the Nvidia GPU in my Nvidia Control panel, I updated my drivers, Device manager is finding both cards.
Is there a way to tell my laptop "Look, I don't care about saving my battery, I don't care about noise, I don't care about heat (as long as it does not damage anything), just ALWAYS use the Nvidia GPU, even when it's not needed, so I can actually have some enjoyment out of the 1600 EUR I spent on this machine"?

Check your power button light and see if it lights red(red=dgpu, white=igpu) and make sure you've attached battery with AC plugged while playing games.
Fan speed is changing by different cpu/gpu temperature, so check the temperature and the fan speed in Dragon Gaming Center and compare the temperature and the fan speed under different situation.
Can you tell the graphics driver version you're using? (both Intel and NVIDIA one)
Sadly for the Optimus structure, you can't disable the single graphics but you should be able to use the dGPU to run the game. Except the settings in NVIDIA Control Panel, you can also try to right click on the shortcut of the game and choose "run with graphics processor"> "High-performance NVIDIA processor"

Similar Messages

  • HT204053 when trying to set up icloud in my iPhone the icloud app in settings is not highlighted and thus does not activate . How do I correct this?

    I am trying to switch on icloud on my iphone, when i go to settings on my iphone the icloud app is not highlighted and not accessable. How do I turn it on?

    Welcome to the Apple Community.
    Settings > General > Restrictions, make sure you are allowed to make changes to accounts.

  • My iPhone 3gs does not hold signal and just says "searching" this happened after I updated to 5.1.1. What can I do to fix it.

    Ever since i updated to 5.1.1 my phone just says "searching". I live in a highly populated area with many at&t towers, and this has made me pretty much despise apple, concidering that i've been without a phone for the past week. What do I do to fix it? If it is a software issue.

    Hello there, kiwilucea.
    The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Why doesent Firefox does not remember Emails and passwords? Seems this issue started when 4.0 came out.....

    Well ever since FF 4.0 came out it doesn't seem to want to remember all my emails and passwords, once in a great while it will scroll down and show my email but once i click it it doesn't even place my password in, Such as accessing my email or logging into an account on the web such as Facebook, MySpace or anything like that, and i have to re-log in every single time when i used to do click, click Done, Id like to continue doing that...

    To ensure that no malicious software has been installed, try running several malware scanners. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
    * Malwarebytes - http://www.malwarebytes.org/mbam.php
    * SuperAntiSpyware - http://www.superantispyware.com
    * Ad-Aware - http://www.lavasoft.com/products/ad_aware_free.php
    * Windows Defender - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    * Spybot S&D - http://www.safer-networking.org/en/home/index.html

  • HT2188 I have 4s iphone . I got message on phone iOS 6 is available , please up grade it . I did it and now now Wi -Fi is available. I lost Wi-"Fi  . even it does not activate and in General  its Serial No. is  N/A .  Please tell me what to do

    Hello Friends ,
    I have  iphone 4s . One day I got message iOS6 is available , do u want to update it . I press YES  .  as soon as my software was up dated.  My Wi-Fi  was disappeared .  In Settings Wi-Fi  does not activate . Please suggest me what to do?  Even in General , Wi-Fi does not have address  there is writtern  N/A

    Had similar problem. I unpluged my Wi-Fi roughter for maybe 10 seconds and turned it back on, checked my 4s and Wi-Fi was working.

  • I've forgotten your password Baymel icloud when my resend the message does not appear anything and I can not activate the device

    I've forgotten my password on icloud when i resend the message does not appear anything and I can not activate the device  
                     any one help plz :'(

    IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Please Get the iPod Touch User Manual for iOS 5

  • When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

    When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

    I have never seen it but then I run SL which is much more reliable than Lion..
    See
    http://pondini.org/TM/E4.html
    Check the master guru of all TM problems.

  • HT201407 i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?

    i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?

    Where did you buy this iPhone and how did you unlock it?

  • Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini

    Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini

    There is no license required for iWeb.  Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Skype click to call does not activate- I have down...

    Skype click to call does not activate- I have downloaded the program and updated the chrome
    what can I do to use Click to call?

    The easiest way to uninstall "Skype Click To Call" is to use "The Revo Uninstaller"
    http://www.softpedia.com/get/Tweak/Uninstallers/Re​vo-Uninstaller.shtml
    Get the free version.

  • Keys fn fn (or other) does not activate the dictation only functions "Edit" "Start Dictation .... on MacBook Pro, Please give me the solution Thanks.

    keys fn fn (or other) does not activate the dictation only functions "Edit" "Start Dictation .... on MacBook Pro, Please give me the solution
    Thanks

    Welcome to Apple Support Communities
    It's possible that Dictation is set up to be turned on with a different key. Open System Preferences > Dictation & Speech, and choose the key you want to use to activate Dictation next to "Shortcut". Read > http://support.apple.com/kb/ht5449

  • HST60: qms$trans_errors.display_messages does not activate error window

    Using qms$trans_errors.display_messages; does not activate the error window. The window is popped but is not activated and no errors are shown. When activating the error window the errors are shown.
    Help needed.

    I have the same problem...
    My scenario is:
    I have a form with one block, a control block that collects data then from a when-button-pressed trigger on a button also on the control block, I call server-side code that updates tables (using the Tapi upd/ins/del procedures) but when a BR error occurs and returns to the form , the error block pops-up but is greyed out, only when I click on the block do the errors appears ok.
    NOTE: this only happens the first time the server code is run any subsequent times the error block displays fine.....
    code in ON-ERROR at form level:
    /* CGAP$TES_SEQUENCE_BEFORE */
    begin
    qms$event_form('ON-ERROR');
    end;
    code in ON-ERROR at block level:
    /* CGAP$OLES_SEQUENCE_BEFORE */
    begin
    qms$event_ctrl_block('ON-ERROR');
    end;
    I tried the sychronize and then moving to the block after the on-error code , but it made no difference.
    Regards David Short.

  • Cs4 does not activate automatic on my new computer

    On my new Apple iMac 27" Retina quad i7, my CS4 suite does not activate. As for as I understand it should activate automatically, but I get a message "De licentieverleningsprocdure voor dit product werkt niet meer" (in english: the license activation procedure does not work anymore). Does someone know how to deal with this?

    Start by reviewing these procedures:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Enabling and using the "root" user in OS X - Apple Support
    Since CS4 was never designed for OSX 10.10 or so, you will need to tweak user permissions on the relevant folders for the activation system to work.
    Mylenium

  • TS4185 face time icon does not activate app

    when i try to open FT by clicking on its icon - it does  not activate application. I have to reboot the system to start working again and then, after a while it happens again. Any suggestion would be appriciated.

    Settings>General>Restrictions. Check to make sure it wasn't restricted.
    You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
    Settings>General>Reset>Reset Home Screen Layout.

  • SUS does not activate Updates

    Hi,
    my SUS in Server 3.1.2 does only show tht there are new Updates, but does not activate nor download them.
    Whats up with that freaky stuff called "Server"?

    If this local configuration is using .local as the DNS domain, then DNS services are incorrectly configured.
    Windows Server used that as a default for a while, unfortunately — that's caused no end of trouble.
    That domain is presently reserved for Bonjour / multicast DNS / mDNS use, and not available for this usage.
    Use of .local for a DNS server is known to cause issues, and is something the Apple network engineers have recommended against.
    If you're going to use a bogus top-level domain, then you'll also want to stay out of .arpa, and probably also out of .com and any other ICANN-sanctioned top-level domain, if you don't have a registration for the domain.  Or (easier, better) reserve a domain for your own internal use.
    Here are details of setting up DNS on OS X Server.

Maybe you are looking for