GT70 2PE FN and CTRL keys swapped!

Hey guys,
So this is a very weird problem: recently after a reboot, my FN and Left CTRL keys got swapped.
I understand this happens at BIOS/EC level, but haven't touched/flashed those in a while. I've been using a custom BIOS provided by Svet for about 4 months, and never had any issues with it or keyboard problems such as this one.
Anybody know what's happeneing here? How do I fix this? Thanks in advance

Quote from: Svet on 12-April-15, 23:51:28
huh
can you check if they are swapped in windows only or also in bios setup or outside windows?
and have you done EC reset? https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller
Hey Svet, thx for fast reply,
Currently I have a dual-boot configuration (Windows 8.1/Ubuntu 14.04 LTS, both 64-bit) and I can confirm it also happens in Ubuntu, so it must not be Windows related.
Also I noticed one thing, when I went to BIOS to check current EC version all I found was something like this:
EC Version: Sve???? Ver?.??
EC Build: <a large string of numbers>
if you want I can post a photo of this. So should I still reset the EC like you said?

Similar Messages

  • Request: GX640 Fn and Ctrl Key Swap

    Hi,
    I'd like to request a Fn/Ctrl key swap for the GX640.
    Bios Information:
    BIOS Version: E1656IMS.106
    BIOS Build: 02/12/2010 11:06:43
    EC Version:1656EMS1 Ver4.06
    EC Build: 12/15/2009
    Thanks

    Quote from: Pherein on 24-March-11, 12:56:03
    Hmm trying to flash the bios now but it's being stuck on the screen in the images linked to this post for about 15 minutes :S Have I bricked it? What should I do?
    http://img858.imageshack.us/i/dscf4542.jpg/
    http://img29.imageshack.us/i/dscf4543k.jpg/
    Quote from: Pherein on 24-March-11, 19:46:50
    I performed a hard-reset and the computer still worked fine, it seems the flashing process never started. I noticed I had the USB stick plugged into the USB/eSata combo port...wonder if that made a difference. I'll try flashing again using a regular usb port.
    Edit: This flash worked perfectly ) Don't know what happened the first time...
    Thanks,
    Pherein
    well done  
    the lockup behaviour exactly as described can hapends in very rare cases in ratio 1/100,
    its hapends to me think around 4-6 times [from 500 ec updates one after another in a loop],
    and in some very rare cases the EnE flasher hangs at startup and FAN spinup @100% and do nothing,
    i suspect ec unable to enter in reset mode or its some kind of the EnE flasher bugs,[too small delay to wait the EC for reply]
    but its not dangerous, etc: do not contain deadly properties.

  • Fn and Ctrl key swap for GX740?

    hi, I searched through some topics, I found out that there is a EC mod to swap Fn and Ctrl key for GX620, but does it work for GX740?

    No, it will not work and probably will kill your notebook if you attempt this.
    You can open an request for your notebook in correct forum section:
    https://forum-en.msi.com/index.php?board=51.0

  • MS-1757 Fn and Ctrl keys swapped

    Suddenly my function and control keys are reversed and I can't figure out how to turn them back. I've had this MSI laptop for over a year and I've never had this problem, Ctrl on the bottom left corner of the keyboard and function just to the right of it. Now, all of a sudden, I have to hit Fn + C for copy and all other Ctrl-governed shortcuts.
    Does anyone have any idea how to turn it back to the way it used to be?

    Have you updated BIOS or EC firmware lately? Maybe you should debug the issue beginning from BIOS and EC.

  • Fn and Ctrl Key swap on BT keyboard

    Hello, I know how to swap the keys on my thinkpad (using the BIOS). But I want to do that on external BT keyboard. How can I do so?

    No, it will not work and probably will kill your notebook if you attempt this.
    You can open an request for your notebook in correct forum section:
    https://forum-en.msi.com/index.php?board=51.0

  • Request GX630 bios unlock overclock menu with fn and ctrl key swap.

    anyone out there know how to unlock the bios for GX630 so you can manual config the overclock ?
    thanks

    There is nothing to unlock in the BIOS that will allow you to manually adjust the FSB Frequency or anything like that.

  • Newbie: swap fn and ctrl keys on T60

    I bought a used T60.  I am used to using HP Pavilions where the Fn and Ctrl keys are in the opposite positions as on the T60, and I am having trouble retriaining my fingers.
    So i looked for info about how to swap them.  I understand KeyTweak doesn't work on the Fn key, and then I ran across a message about getting to the BIOS.
    I have never messed with BIOS stuff before, but I did interrupt booting, get to it, but do not see swapping the Fn and Ctrl keys listed among the keyboard options.  So I am guessing this feature is maybe in a newer verison of the BIOS.
    I don't want to trash my laptop, but I'd like to swap the functioning of these keys - is there an idiotproof way?
    Also, I used the onetouch Pavilion keys a lot to invoke Firefox or thunderbird.  Is there a way to make a key on the T60 keyboard do that?  There are several keys I never use for anything, like PgUp, etc.
    Thanks.

    Not exactly true. You can't swap the keys with ORIGINAL BIOS - there are modded versions available that will let you do it.
    Read (and download) from here: http://forum.notebookreview.com/lenovo-ibm/474396-​fn-ctrl-swap-all-lenovo-laptops-solved.html
    Note! This is unofficial BIOS images - you might brick your computer, and neither I, nor Lenovo take any responsibility
    IT-technician, running my own company in Bergen, Norway
    Thinkpad T61, 8895CTO C2D 2Ghz/4GB/120GB SSD/1400x1050

  • Request: BIOS for GX740 to swap Fn and Ctrl key.

    hi,
    I was redirected from this topic https://forum-en.msi.com/index.php?topic=139362.0
    Apparently there is no BIOS function in GX740 for the owner to swap Fn and Ctrl key.
    Really appreciate it if it's available.
    Thanks.

    Quote from: 5rg on 08-August-10, 19:48:32
    I didn't receive email. I used alternative method form PM. Thanks.
    I'll contact you if there is a problem with this mod. I didn't try it yet. Thanks again.
    Quote
    I didn't receive email.
    It was sent to ******* @gmail.com address. Check it in "spam" folder, maybe is there as there is no errors reported.
    Quote
    I used alternative method form PM. Thanks.
    Oki, that's the same.
    Quote
    I'll contact you if there is a problem with this mod. I didn't try it yet. Thanks again.
    You're welcome

  • How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

    How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

    The BIOS feature that you request already exists.
    1.  reboot the computer
    2.  press F1 to enter BIOS setup
    3.  config -> keyboard/mouse -> Fn and Ctrl Key swap

  • Swap fn and ctrl keys

    Is there any tool that would let me swap functionalities of fn and ctrl keys on my MacBook Pro?

    try [Ukelele|http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele].

  • FN CTRL Keys Swap in X220 BIOS?

    Can someone with an X220 please verify that you can swap the FN and CTRL keys in the BIOS.
    Thanks.

    It should be there on all BIOS versions for the X220. I don't see why they would remove the feature.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Fn - Ctrl key swap reset after putting to docking station?

    On my X220 I enabled the BIOS option to swap the Fn and Ctrl key which works fine. However whenever I put the laptop in the docking station the setting is reset until the next restart.
    Did any body find a solution to this?

    Thanks, I took the survey. It's interesting the questions on there were asking about location of keys like page up and page down. I find the position of those keys are not that important to me because I don't use them that much and don't seem to mind looking at the keyboard to find them. Also they are almost always in different spots depending on whether you are on a desktop or laptop keyboard so I guess I'm used to unconsciously switching depending on which keyboard I'm on.
    But the left control key is one of the most heavily used, at least by developers like me (control+c to copy, control+v to paste, and control+space for code assist, shift + control + f to format code, shift + control + r to find resources, etc...). I have to hit that Ctrl button 1000 times a day. And the key is in the bottom far left corner on every keyboard (desk top and laptop) I've ever seen until now. Having to remember to look down at the keyboard to find the key is proving difficult and I think is actually hurting my productivity. Especially control+space (when you are expecting a popup to automatically complete the line of code you're working on and instead the screen blinks, resizes and your whole editor loses focus it really breaks your flow of thought, so thanks a million for helping me turn off the silly screen zoom feature).
    Hopefully I'll get used to it like with the other keys like page up and page down although I've had the laptop for two weeks and it's proving difficult. If I had know that Thinkpads have this layout and how maddening it would be to get used to it I probably wouldn't have bought it, even though everything else about it is great. It's amazing how such a small thing can become such an irritant.
    Well thanks again, and if anybody from Lenovo engineering is reading this post, my vote is for some bios setting on the T61P that swaps the functions of Fn and Left control key. It would save me a lot of grief anyway.

  • Function and Ctrl-Keys in HTML DB

    How can i use Function (F1...F12) and CTRL-keys in HTML DB ?
    1000++ thanks...

    Well, this won't give you the ability to use the Fn keys on a PC keyboard, but you can set your own AccessKey for various elements on the page. Check out:
    http://www.htmlgoodies.com/tutorials/html_401/article.php/3479621
    It's been suggested at least a few times that HTML DB could support this in a declarative fashion.
    Hope this helps.
    Joel

  • Want to switch the position for the Fn key and Ctrl key~~ very annoying

    I got my W520 CTO for about two weeks, I hate the keyboard design.
    I don't understand why Lenovo engineers change the positions of
    Fn key and Ctrl key! So unprofessional..
    For most keyboards, the Ctrl Key is at most bottom-left, which
    is convenient for the little finger.
    Ctrl key is so often used (especially for programmer) such that
    it should be easily pressed using litter finger.
    Fn key is seldom used (unless for projector, adjust brightness
    as such).
    I am thinking to change the position of the two keys, does Lenovo
    provide this service?

    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Why-is-the-FN-key-on-the-outside-left-inste...
    I prefer Ctrl on the inside; it's closer to the pinky. Also more comfortable for FPS's as you can curl the pinky and hit it with the back rather than the front.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Swap cmd and ctrl keys?

    hello im a mac user but i have to open windows on bootcamp to do some work sadly.
    im finding it realy annoying having to swap between "command" and "ctrl" all the time. is there a way to swap them?

    You don't say which Windows you are using but there are many free applets for Windows that allow restructuring the keyboard. Just google for them.
    I take it you don't use the terminal mode in Leopard much, because that's the same as Windows.
    It always takes me a few minutes for my brain to "fix" my fingers for the OS in use - then it's OK.
    But I am sure you will find something on the net that will do what you want.

Maybe you are looking for

  • Error in Pre-Pop Adapter for AD using ResourceObjectDefinition Mapping

    Hi I have a PRe-pop adapter for Org name in AD - One of the variables is ResourceObjectDefintion. However OIM is not able to map it to the right object name and throws the below error - cAdapterDataMap/getResourceObjectInfo encounter some problems: E

  • PDF Workstation application

    Dear Friends, Till yesterday I could able to view PDF documents. But today I couldn't able to. I checked the docuement type, it was checked for KPro. I checked for PDF in DC30. File suffix for appl. - PDF File format - .pdf,.* MIME type - application

  • How to include flash object in web page

    Hi, I am using the code below: <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="626" height="159"> <param name="movie" value="menu_application.swf" /> <param name="wmode" value="transparent" /> <!--[if !IE]>--> <object type="applic

  • Using Flash Component

    Will Apple reject a Flash iPhone app that uses a Flash component? I want to create the app with a Flash plug-in component. Thanks.

  • Delete requisition -- E-Recruitment

    I try to delete a requisition, logged in as a recruiting admin. When I select the requisiiton and click on the delete button, I get an error "Requisition status is not 'To Be Deleted'". Is there any config to be completed? I thought this is delivered