GT72 Thermal Performance

Hey all,
I’ve read a bit about people being curious about the 980M and how hot it runs, so I decided to try it out on my GT72. While I was at it, I thought I should give the Cooler Boost feature a go at the same time…
What I did was to run a looping benchmark (Resident Evil 6) for about 15 minutes, and let Afterburner run in the background, logging temperatures, recording the maximum. I did also crank up the core frequency by a full 135MHz, resulting in a peak boost frequency of 1261MHz on the GPU. The memory was clocked at 5800MHz.
First up was the standard fan profile, the GT72 out of the box, if you will. I wish I had a decent way of giving you noise levels as well, but to me, there is obviously noise from the cooling, but it isn’t bad at all. You can easily game without headphones on and not be disturbed by the noise levels. Also, the temperatures stay at a relatively (for notebooks) low 80°C.
After that, I did the same run, but with Cooler Boost activated instead. The exact same overclock, benchmark and once more over 15 minutes in RE6. The result is a louder machine as the notebook’s fans spins up to max, but honestly, I found the noise levels non-intrusive for gaming with a headset on. A lot quieter than the GT70, for example.
This feature drops the temperatures from the already quite low 80°C peak with a full 6°C to only 74°C, with a full 135MHz GPU overclock. Sure, you won’t want to run with the Cooler Boost activated all day, but for those toasty LAN parties, where you sit around with a headset anyway, I can see the point.
Tests were conducted with a 22°C ambient temperature in the Resident Evil 6 benchmark at 1080P, high settings for 15 minutes.

MSI GT72 2QE Dominator Pro is No. 1 Gaming notebook from notebookcheck.com
http://www.notebookcheck.com/Top-10-Gaming-Notebooks-im-Test-bei-Notebookcheck.91065.0.html

Similar Messages

  • Gt72 2qe - performance.

    Hi guys
    Got my gt72 2qe last week. I'm finding the performance is pretty good but I'm still not super impressed. I play a game called " Infestation survivor stories " and I have some fps issues. When I run at max settings or low settings I have the same provlems when looking into areas with a large city. Its definitely not the gpu because the fps drop is the same whether running ultra or low settings.
    Also in Arma 3 I can't seem to hold a steady 60+ fps. I know these games are fairly demanding but I'm curious what would be considered the bottleneck in this laptop?
    All drivers are up to date. Running windows 7 64bit
    Cpu - 4720hq 2.6
    Gpu - gtx 980
    1tb 7200 hdd
    No ssd
    8gb ram.
    Ultimately I just want a laptop that I don't have to worry about dropping below 60 fps in most games. Previously I had the Asus g75vw 2.4ghz gtx 670 8gb and while the gt72 does perform better forsure.. Im just a little disappointed im still having to turn settings down in games to maintain 60 fps.  I dislike PC's and would much prefer to solve any bottleneck issues. Or maybe I'm expecting too much from a gaming laptop?

    I wonder if adding an SSD to put my games on and increasing the ram to 24gb would help. From what I've read the GTX 980m should be more than capable of running these games on max settings. Also the 4720HQ seems to get plenty of praise... I wonder if perhaps the CPU isn't running at full clock speed?
    I do have the laptop set to sport mode and performance power setting. I'm just a little surprised there is FPS issues in these games.

  • GS60 Thermal Performance

    During our previous overclocking tests of the GS60 we discovered that it comes with a nice performance to weight ratio, but we were also slightly surprised by the fact that the computer had no trouble supporting quite serious overclocking of the graphics card either.
    Logic dictates that the slimmer a notebook is, the harder it is to fit large cooling solutions – that’s why we can cool the 980M and any mobile CPU in the GT72 with ease, while keeping it quiet. The GS60 though, is under 20mm thick including screen, meaning that space for cooling is critical.
    The obvious way is to throw in a couple of fans with massive RPMs, but that would be extremely noisy. Another way would be to make the system thicker to allow more space for the cooling fins, allowing for a larger convection area helping you exhaust the heat, which of course makes the system bigger, heavier and less mobile. Instead, we’ve worked with the space available and managed to create a system that stays surprisingly cool even under full load.
    Yes, we’ll have to admit – it’s not whisper quiet, but nowhere near as bad as you might imagine by looking at how slim the GS60 is. All things considered, we believe it is at a sweet spot where it stays quiet for everyday use, while making itself known during gaming, which is when you have a headset on anyway, right?
    We’re always partial to a benchmark, so we set about finding how hard we can push the GS60’s thermal solution… In doing so, we got nowhere near the limits of the GTX 970M, despite a 20 minute loop of game test 4 in 3DMark 11, meaning constant 100% load on the GPU. In 22°C room temperature, we maxed out at 85°C on the GPU, despite overclocking it to the max, thus creating extra ”excess” heat.
    Of course the system was audible, but even when set in an office landscape with people working all around during the benchmarks, nobody as much as lifted an eyebrow.
    In case you’re worried about the cooling of the GS60, you shouldn’t be, it leaves plenty of headroom for the processors.

    MSI GT72 2QE Dominator Pro is No. 1 Gaming notebook from notebookcheck.com
    http://www.notebookcheck.com/Top-10-Gaming-Notebooks-im-Test-bei-Notebookcheck.91065.0.html

  • Early 2011 MacBook Pro- The thermal paste discussion.

    It is my goal to clear up the questions and concerns Apple customers have been having regarding heat or fan related concerns with Early 2011 MacBook Pros. If your MacBook Pro was produced within the last few months the thermal issue has been resolved and it will likely not be in issue for you. If you are still wondering if your computer is effected or what the real issue is keep reading.
    The MacBook Cools itself by 2 main methods: active and passive. The active cooling is via a fan that blows air through a heatsync and into a tube called a heat pipe which leads to the back of the computer where the hot air is discharged through a vent at the bottom of the screen behind the hinge. The fan lowers the air pressure inside the case causing outside air is drawn in the case, displacing the hot air inside and helping to cool the other components.
    The computer uses passive cooling to remove the residual heat from the processor which comes mostly in the form of radiant heat. Passive cooling is also used to cool the other components of the computer (memory, disk drives, battery etc). Passive cooling works by conductive heat transfer ie. syncing to the case of the computer. Some of the heat then is radiated. Some of it is transferred from the outside of the case via convective cooling; the foot pads on the bottom cover are designed to raise it up just enough to allow air underneath for convection to occur. (Convection is the process in which hot air to rises and is displaced by cooler air.) The rest of the heat from the bottom cover is absorbed by whatever surface you have the computer on.
    The processor will not sync to the case very much if the board is assembled properly however the other components of the computer will, requiring the case to be in open air to allow for passive cooling to take place.
    If you have some sort of covering such as a plastic snap on case it will likely interfere with passive cooling in all of it's 3 of it forms, this will cause the computer to be abnormally hot. I recently saw someone in the Apple store with a MacBook Air experiencing abnormal heating due to a plastic snap case so this particular problem is not unique to MacBook Pros and it is not the cause of the issue being discussed here. I do not recommend the use or anything that covers the computer while it is running with the exception of something that covers the back of the display panel only. If you are worried about your computer getting damaged go and buy a laptop insurance policy from Worth Ave group. The insurance does not cover cosmetic damage or misplaced items but will cover accidental damage including spills. This insurance also covers theft, vandalism and natural disasters, is quite inexpensive and the claims process and deductible  is similar to most phone insurance plans (which they also offer).
    User induced overheating can also occur when the computer is placed on an improper surface such as a couch cushion, car seat, bed, pillow etc. Doing this can interfere with both passive and active cooling.
    As I mentioned earlier In all likelihood if your computer was produced after May it is not affected. I personally have been in posession of 3 MacBook Pros, one produced before May which had the problem, one after which had no problems and one produced more recently that has mind blowing thermal performance way beyond all of my expectations.
    So the question at this point is exactly what is the problem, how can it be diagnosed and how can it be rectified.
    After extensive research and testing I have determined the issue to be related to improper application thermal paste. I involuntarily became involved in this pursuit as a result of the problems I was experiencing and I did not initially come at from an objective viewpoint but rather one of cautious skepticism. I had anticipated before purchasing my computer that there may be a thermal issue. This anticipaion came as a result of reading an article on ifixit.com about the disassembly of the brand new early 2011 MacBook Pro. When the technician performing the disassembly removed the main heat sync he expressed concern about how much much thermal paste was present, expressing that it seemed excessive. This lead the technician to question wether or not it would cause heating problems.
    Proper application of thermal paste is critical to the functionality of the active cooling system and when applied improperly will not properly transfer the heat to the heat-sync which in turn gets cooled by the fan. Proper application of thermal paste insures the heat is removed from the case as efficiently as possible. Doing this both reduces the speed at which the fan needs to run in a lot of situations and prevents too much heat from the processor needing to be cooled by passive means. If is is not applied properly it will eventually lead to overheating of the case as well as the other components of the computer. This can cause damage firstly to the computer's battery and can also significantly shorten the life computer. (Or any other kind of electronic device for that matter.)
    The problem can be diagnosed by testing the computer using a program called System Load or any other software that will put your computers proscessor use up to its maximum and keep it there indefinitely. Placing full load on your GPU at the same time during the test is also recommended. Keep in mind, if you are using your computer the fan will spin up if needed for additional cooling. You should expect the fan go up to its maximum speed during the test, it is not in of itself an indication of a negative result. Make sure to have the computer plugged in, fully charged and on a proper surface. A desk or other flat surface should be fine. Exceptions would include the top of a refrigerator since it has insulation just underneath the metal exterior or any surface that is heated by any means such as a dryer or other appliance.
    (The temps to follow are in ºF)
    Run the test for up to 1 hour. If the case of the computer breaks 93 degrees your unit is likely affected. Expect the unit to even possibly reach temps approaching and exceeding 100º, if this happens immediately abort the test. Also look for the processor temp shooting up to around 180 in the first 30 seconds and the fan spinning up right away. Typically on a properly functioning unit the temperature of the case will end up being somewhere in the neighborhood of 88-91º. If this test is preformed in a room with a normal ambient room temperature of about 68 degrees. Even after an hour the case of the computer should not be significantly hot, just warm to the touch. On a normally operating unit the fan will start to kick in within 90 seconds or so and may not reach full speed even after several minuets.
    At one point the case of my computer actually reached 95º during normal web browsing.
    This is a problem that I have had successfully corrected twice by reapplication of thermal paste. The first time was on a machine produced prior to may and the second was after a logic board was replaced at the repair depot. (I suspect the inventory turnover is lower for boards than whole computers resulting in a board from the initial production run being installed in my computer.)
    If you forget everything I just wrote remember this. #1 if you are using your computer hard enough the fan will end up running at high speed at some point. #2 This problem is not in any way related to the design of the MacBook Pro, or its use/application. #3 This mostly not a problem of the CPU being too hot; these Sandy Bridge CPUs are rated for 212ºf and will routinely be in the neighborhood of 200º, this is hotter than other chips but well within design limits. #4 I have done everything in my power to make sure that this problem has been corrected and I have every logical and evidenced based reason to believe it has been resolved in machines produced after may. #5 This is not an Apple acknolidged issue. Technicians will tell you that there is no problem because these higher temps are normal and within operating limits and if they weren't the machine would shut itself off. (This is a bit extreme; just like a lot of other devices such as electronics, toaster ovens and space heaters with thermal overload protection this automatic shutoff is intended to occur when damage or risk of fire is imminent because the device is WAY outside of normal operating paramaters.) They will also not tell you when asked what these limits are, that they know what they are or in some cases that such figures they even exsist.
    I stake my personal and professional reputation on the accuracy of my findings, it is my job as a private consultant to help my clients to resolve complicated and expensive issues just like this one.
    Bottom line if you are having a problem and Apple won't fix it on warranty don't ditch your machine, just pay to have it done yourself. In most cases you can pay have it done at the Apple store. It will probably cost you less than 100.00, and it will not void your warranty as long as the work is done by Apple certified technician. It will be well worth it; after all in spite of this MacBook Pro's are hands down the best portable computers on the market, with an industry leading warranty and support to back it up. On it's worst day Apple's service and support is better than any computer/ consumer electronics company, even on its best day.
    I hope this helps to clarify this issue! I also hope it will help anyone affected to resolve the problem instead of resorting to a refund and settling for something else.

    hello all
    you can try this:
    Go to system preferences > settings > built in display >  see bottom of window.
    check "show mirroring options in the menu bar when available". then click "airplay display" > and select your device.
    That's what happened to my MBP - 15-inch, Late 2011 model.

  • Best way to apply thermal compound

    I'm going to tear down my 3 year old laptop and apply thermal compound to the CPU. I do have a question.
    Some instructions have said to apply it all over the cpu, other say to apply only a rice grain sized, and then push the heatsink onto the cpu and let the pressure from the heatsink push the thermal paste around.
    What do people here say is best?
    Toshiba Satellite L755D-S5218
    AMD A6-3400M Quad-Core CPU
    8 gigs RAM
    Windows 7
    Solved!
    Go to Solution.

    I guess whatever gets results.  I would consider putting thermal compound on both surfaces a waste of material and also likely over-application which can sometimes give worse thermal performance and/or possibly cause other problems if excess thermal compund comes into contace with any other surface mounted devices.  Oh well, glad it all worked out.
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Does the MacBook have the thermal paste "problem"?

    I'm really thinking about saving up my money to get a MacBook, but with all of the thermal paste "problems" with the MacBook Pro, I'm not sure if the MacBook has the same problems. Has anyone with a MacBook taken it apart and examined the thermal paste? I'm hoping that Apple has chnaged their instructions on how much thermal paste to apply in the MacBooks and MacBook Pros. If anyone has done this, or knows of any place on the web with pics of the MacBook taken apart, I would love to hear about it. Thanks in advance!
    -MRCUR
    Message was edited by: MRCUR

    Some people have encountered very excessive amounts of paste on the MacBook as well, and one person out of curiosity went into his 12 inch Powerbook and found it glopped on there too -- and of course a healthy improvement in the thermal performance of the computer once it was done properly. Seems to be an ongoing Apple problem -- but not necessarily a problem in every machine, as some people have found much less excessive paste application and only a minimal improvement in thermal performnce after reapplying.
    The MacBook is very much easier to disassemble than the other machines in part because the logic board and heat sink faces up and therefore you do not need to remove the logic board, but do please note that if you do take it apart, any damage that is deemed to have resulted from your repair will not be covered.

  • GP60 or GT70??

    Greetings,
    I want to buy an MSI gaming laptop. I open here a new topic because I've been doing some research since a few weeks ago and I cannot make my mind. Considering my budget, I finally got these two options:
    1. MSI GP60-I72QF LEOPARD PRO LITE, with i7-4720HQ 2.6Ghz, 8GB RAM and GTX950m 2GB DDR3.
    2. MSI GT70-2QD DOMINATOR, i7-4710MQ 2.5Ghz, 8GB RAM and GTX970M 3GB DDR5.
    I want a laptop for gaming; i have another one for work. I guess that GT70 is better at that for the 970M (even it has a lower i7 ???). The thing is that the price gap between them is of around 550$ at the place where I'm living now (Korea), so I wonder if it is worth the effort or I could do just fine with the GP60. My aim is at playing actual games at PS4/XBOXO level and being able to do so for a few years.
    Thanks a lot for your help!

    Second to RX-8....
    If target to PS4/XboxO, why not go directly to GT72 ? ^^
    Quote from: RX-8 on 10-April-15, 13:20:51
    Considering the words you mentioned "My aim is at playing actual games at PS4/XBOXO level and being able to do so for a few years.", I would recommend you buy the GT70.
    The CPU difference is slight and can be ignored.
    GT70 has better GPU, VRAM, screen size and thermal performance.
    SSD number also matters. (If RAID set)

  • Vista will not start with 6 GB of ram (worked with 2GB)

    Hello, I recently upgraded from a P6n to a P7n and while I was at it, I purchased 4 more GB of ram, bringing my new total to 6GB of ram. I installed vista, it detected the ram, everything worked great the first night. The next day I tried to start up and blue screen of death. (PS it DID detect all 6 GB the first night...WITHOUT SP1 or SP2). We messed with the BIOS settings, hitting F6 to return it to default and it worked for about 45 minutes. Then crash again. Now we are back in BIOS, messing with it for an hour, finally it works. Then crashes again. I take out the new 4GB and everything works just fine on only 2GB of ram. I read that Vista SP1 will fix the ram issues, so I spend all night dlding it and SP2. This morning I wake up, stick in all the RAM, and I am back to square one.
    My question is: Is there any settings I can change to get this to work? Why did it work the first night and not now? Can I go into BIOS and change something, or go into memory voltage and up it? It is set at the default voltage.
    I have p7n sli-fi, 8800 nvidia, the new ram is a newer mushkin vs. only 1GB sticks purchased a year and a half ago. I have 2 hard drives, 120 GB ATA and 200GB SATA.
    Any help would be greatly appreciated!!! Thank you so much.
    P.S. I have been reading Vista sucks at recognizing more than 3.5 GB of ram. Am i screwed? Why wouldn't the patches fix this? Why are some people able to get 16GB of ram going, yet I cannot get 6?

    Here's the new ram that I already stated:
        MSI P7N SLI-FI LGA 775 NVIDIA nForce 750i SLI ATX Intel Motherboard - Retail
        Item #: N82E16813130175
        Standard Return Policy
        $119.99
    1    
        mushkin 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model 996580 - Retail
        Item #: N82E16820146726
    Here's my OLD ram:  
    mushkin 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model 996527 - Retail
        newegg
        mushkin 2GB (2 x 1GB) 240-Pin DDR2 800 (PC2 6400) Dual Channel Kit Memory - Retail
        Image Viewer
        mushkin 2GB (2 x 1GB) 240-Pin DDR2 800 (PC2 6400) Dual Channel Kit Memory - Retail mushkin 2GB (2 x 1GB) 240-Pin DDR2 800 (PC2 6400) Dual Channel Kit Memory - Retail
        $29.99
        Add item to Cart
            Add item to Wish List
            Email This Page
            Print This Page
            Price Alert
    Special Offers
        NPA
        No interest for up to 12 months. Minimum purchase required.
        Subject to credit approval. Details
        BML
        No Payments for 90 Days on orders over $250.
        Subject to credit approval. Details
    Similar Items
    Not the product you're looking for? We can make some suggestions to help you decide on a product that fits your needs.
    view similar products
        Combos & EssentialsManufacturer InfoReturn Policies
    Combo Deals(view all)
    comboItem
    Anyware HA-IR01SV Infrared Certified MCE VISTA Remote Control mushkin 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model 996527 - Retail
        Anyware HA-IR01SV Infrared Certified MCE VISTA Remote Control  
        mushkin 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model 996527 - Retail
        Original Price: $52.98
        Discount: -$5.00
        Combo Price: $47.98
    Add Item With Selected
    Manufacturer Warranty
    Beyond any applicable Newegg return policy, this item is warranted independently by the product's Manufacturer. Below is a summary provided for convenience only and may not be accurate or current. Use this link for full details.
        * Manufacturer Limited Warranty period (parts): Lifetime
        * Manufacturer Limited Warranty period (labor): Lifetime
    Manufacturer Contact Info
        * Manufacturer Product Page|
        * Website: http://www.mushkin.com|
        * Support Phone Number: 1-800-569-1868
        * Support Website|
        * View other products from Mushkin
    Return Policies
    This item is covered by Newegg.com's Memory Standard Return Policy.
        * Return for refund within: 30 days
        * Return for replacement within: 30 days
        * Restocking Fee: Yes
        OverviewCustomer ReviewSpecificationsProduct Tour
    This mushkin Value Series 2GB (2 x 1GB) EM6400 module (DDR2-800) offers enhanced memory throughput and stability for the most demanding DDR2 computing platforms, far exceeding the expectations of most "value" chip lines. The low latency and lightning data transfer supports major multi-tasking and multimedia operations, and gaming and graphics are a breeze. In the hands of an experienced overclocker, this RAM turns your system into something truly special.
    The EM 6400 is enhanced by Mushkin's Frostbyte heatspreaders, which actually turn out to be something useful, designed to actually direct airflow around the chip to ensure superior thermal performance and system reliability. With extreme performance and Mushkin's renowned reliability, this is the memory upgrade of choice for those DDR2 enthusiasts looking for more out of their high-performance system.
    Review Summary (read more reviews, write a review)
    Item#:N82E16813130082
    Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 65W Dual-Core Processor - Retail
    Customer Choice Award1x Winner of Customer Choice Award - Processors - Desktops

  • MSI R9 280X Gaming Edition Overheating

    I have a pair of MSI 280X cards, one is rev 1.1 and the other rev 1.2 and I use these together for mining. I bought a third card as I was impressed with the thermal performance and noise of the cooler. The first one that arrived had artifacts so this was sent back to the e-tailor and a replacement sent out (both rev 1.2). This also had artifacts so was sent back again. A replacement was again sent out (a rev 1.1) but this time it doesn't artifact but just runs very hot. When gaming on my first two 280X's, they reached about 70C max when gaming (individually). This third card runs at about 85C and is considerably louder as a result. Mining is a complete no-go, the card almost instantly reaches 95C and the AMD drivers crash- presumably due to thermal throttling.
     I told the store I bought it from about this issue and they said I should send it back again. I have now received an email back saying that they could not find a fault with the card as it technically can game and mining isn't tested as it isn't strictly what the card was made to do. As a result, they are refusing to replace it and are sending it back to me. Do I have grounds for a replacement here under MSI warranty and should the store honour my right to a replacement? Whilst technically the card can play games which is why they are refusing to replace the card, the fact it runs so much hotter than my other identical cards and cannot even mine for more than about 5 seconds shows that clearly something is wrong with the card. What is the point of getting a card with a good cooler if 85C when gaming is deemed acceptable? Can someone from MSI please reply and perhaps help out my case with the store? I feel like I've basically paid a load of money for a card that is useless to me as I have an MSI 290 in my gaming computer anyhow.

    as you are in the EU system all warranty service should be done VIA the reseller you bought the card from!
    >>How to contact MSI.<< <--- follow that if you want to directly contact MSI!
    some samples of the R9-280x do run hot (some run at 75-80C max and others will hit closer 90-95C max and is just luck of the draw which set you have gotten) <--- they are lower Grade chips then Prior lines that they came from (HD 7970 chips where better Binned for heat output to be in a 5-10C range but R9 ones are not and may vary alot as a result in a 20C range)

  • P6N - SLI - FI NB (North Bridge) Heatsink Wobble (Ok)

    If your NB heatsink wobbles easily it is because they use a sponge thermal pad between it and the epoxied IC, whose surface is not flat.  The thermal pad has good thermal performance and works well.  The reason it wobbles is there is a square perimeter on the heatsink but the NB IC is rotated 45 degrees on the board so only the corners of the perimeter material make contact.  If they put the perimeter material the same orientation as the IC then the wobble would be almost gone.  Don't know what their real intentions were, they may have done this for air circulation reasons.  It does the job.
    [By the way, I read the NB ICs are designed to tolerate much higher operating temperatures than CPUs; CPUs being ~60C.  A small airflow on the heatsink can help a lot, a medium fan will help even more.]   

    here is what I did , before I even booted up my brand new board I dumped that flimsey looking heatsink and Installed this
    http://www.newegg.com/Product/Product.aspx?Item=N82E16835116018
     it looks AND works very well, it is all coper , w/a cool blue fan . I applied some AS5 on my NB and south bridge
    No real issues with my artic cooler freezer pro CPU heatsink
     Only bad thing about this NB Heatsink is you will have to remove your board from the case to install it

  • GS60 vs. GT72 - performance to weight ratio

    We’ve done a couple of articles on the monstruous NVIDIA GeForce GTX 980M graphics card, since we’ve been fiddling around with a GT72 quite a lot lately. However, as strange as it may sound, we (us writing these articles) haven’t actually had any access to samples with the equally impressive, but better-value-for-money GTX 970M. Until now.
    We got hold of a GS60, which as you probably know is a slim machine at only 19.9mm thick. Due to some clever engineering, we can run a GTX 970M in it without any problems, and since it also uses the same CPU as the GT72 we previously used for performance tests, we can compare them side by side. You can probably see where this is going… Yes, it’s obviously going to be about 3D benchmark performance, GS60 vs. GT72. GTX 970M vs. 980M. Finesse vs. Bulk.
    In any case, below are the specs of the two machines. The benchmarks used are 3DMark 11 and 3DMark Firestrike, as these put graphics performance to the test.
    Starting off with Firestrike, we notice that the GTX 970M in the GS60 will go as far as the drivers will allow us: 135MHz above stock levels: a GPU frequency of 1059MHz and boost at 1173MHz. Obviously, the 970M is down on shaders compared to the 980M as well, but it also won’t overclock as high. The 980M in the GT72 reaches 1173MHz GPU with a boost frequency of 1262MHz, while its memory also overclocks better, to over 6GHz. The GS60 and 970M falls some 80MHz short of the 6GHz mark.
    At stock frequencies, we hit over 9200 points in 3DMark 11, with the GS60 and 970M, wheras the GT72 with its 980M clears 11000. With overclocking, the 970M comes close to the 10k mark, which no doubt would have fallen with higher frequencies if it hadn’t been for the driver limitations.
    Moving on to Fire Strike, we see a similar picture. The 980M is comfortably clear of the 970M, but the 970M still offers impressive performance for a mobile chip. Over 6500 points in Fire Strike, and an additional comfortably achieved 800 points with overclocking.
    Not enough to touch the 980M in the GT72, but there’s more… Remember us bringing up weight in the spec tables? You bet, we’ve come up with another graph with more stats for you folks:
    The GS models were designed for people on the go who still want to do some serious gaming every now and then, while the GT series is more performance focused. This is what we want to highlight with the graph above: the performance/weight ratio in the GS60 is probably among the highest in notebooks everywhere right now.

    Quote from: Jorian;114665
    Thanks for the info!
    Have you checked what were the temperature of GS60 in overclocked mode?
    The GS60 stayed surprisingly cool, I did another article on that actually: http://dragonarmy.msi.com/forum/showthread.php?t=65760&p=114216
    TL;DR quote: "In 22°C room temperature, we maxed out at 85°C on the GPU, despite overclocking it to the max, thus creating extra ”excess” heat."

  • Re: MSI GT72 2QE Thermal pads

    i guess 25-30C is way to much but the gpu and cpu is on idle, max perfomance, turbo, GPU: 23C, CPU: 25C, before change gpu 36, cpu 43, for their thermal compound i am not sure actually i guess some low quality stuff, and they don&#39;t do it correctly at a...

    My problem has been fixed
    Computer now boots normally I can see the BIOS screen and can access it.
    Thanks alot for all the help

  • The MSI GT72 Dominator Pro Owner's Lounge

    Hi Folks, this will be a work in progress, and will be updated as more information becomes available. This topic is also discussed at the NBR forum, HERE!
    ***The MSI GT72 Dominator Pro..... the next great SUPER POWER..... awesomely SEXY too!***
    Welcome to the MSI GT72 Dominator Pro Owner’s Lounge! Available Now..... Order Yours Today, and Prepare to Dominate!
    MSI GT72 Dominator Pro Models, Specifications, and Product Links:
    Specifications
    GT72 Dominator Pro-010 | MSRP: $2,599.
    GT72 Dominator Pro-007 | MSRP: $2,999.
    GT72 Dominator Pro Product Pages:
    MSI U.S.
    MSI Notebook
    MSI Gaming - Dragon Army HQ
    MSI Global
    Where To Buy Your New MSI GT72 Dominator Pro Notebook:  
    Friendly, reputable, and highly respected resellers, who freely volunteer their support to forum members:
    1.) GenTech PC | Website | MSI 17" notebook site page | Tel#: 1-800-990-7945 | email: [email protected] | Contact: Ken Lee
    2.) PowerNotebooks | Website | MSI notebook site page | Tel#: 1-877-711-1777 | email: [email protected] | Contact: Donald Stratton
    3.) Xotic PC | Website | MSI notebook site page | Tel#: 1-877-289-9684 | email: [email protected] | Contact: Justin Nolte
    4.) RK Computers | Website | MSI notebook site page | Tel#: 1-866-760-4998 | email: [email protected] | Contact: Rob M
    Where To Buy MSI Notebooks (U.S. & Canada) | Global
    MSI Helpful Links:
    MSI Gaming
    MSI AfterBurner
    MSI Dragon Army Forum
    MSI HQ User Support Forum
    MSI Customer Service | Global
    MSI Notebook Warranty Information
    MSI Notebook Product Registration | Global
    Official MSI GT72 Dominator Pro Product News:
    17 July 2014: MSI Unveils GT72 Dominator Pro, the Benchmark Breaking Desktop Replacement
    22 July 2014: Evolution of the ultimate GTX's gaming laptop MSI GT72 Dominator/Pro Gaming NB, brand new design and unique features with latest NVIDIA GTX graphics
    29 July 2014: GT72 Dominator Pro Receives Best of Computex 2014
    Official MSI GT72 Dominator Pro Downloads:
    Bios
    Drivers
    Firmware
    Utilities
    Manual
    Gaming Mouse Driver
    Other Downloads:
    NVIDIA GeForce Final Release Drivers
    NVIDIA GeForce Beta Release Drivers
    NVIDIA Control Panel User's Guide
    Latest NVFLASH for Windows & DOS
    MEMTEST86 Free Download
    MSI AfterBurner
    CPU-Z
    GPU-Z
    NVidia Inspector
    HWMonitor
    FutureMark's 3DMark & PCMark8
    AIDA64
    Atto Disk Benchmark
    HD Tune
    Svet's Fermi / Kepler VBIOS/EC Tuner Version (2.84c) GTX-880M support soon! :D
    Treexy Driver Fusion ( .....replaces the ever popular, Phyxion 'Driver Sweeper')
    Piriform 'CCleaner'
    Magical Jelly Bean (product key finder)
    GT72 Dominator Pro Factory 'Stock' Hardware Info ***May vary and subject to change***
    CPU: The 4th Generation Intel® Core™ i7-4710HQ
    GPU: NVIDIA® GeForce® GTX 880M (Kepler GK104M) | Intel® HD Graphics 4600
    Chipset: Mobile Intel® HM87 Express Chipset
    Wireless: Qualcomm Killer N1525 Wireless-AC | driver download
    Ethernet: Qualcomm Killer™ E2200 Game Networking | driver download
    Bluetooth: Qualcomm Atheros QCA61x4 Bluetooth 4.0
    Screen Panel: Innolux Corporation | Chi Mei, ID: CMN1735 | Model: N173HGE-E11, Matte | Product Specification
    HDD: Hitachi Global Storage Technologies, HTS721010A9E6300 = 1TB | Travelstar 7K1000, 7200 RPM, SATA III
    SSD: Toshiba, THNSNJ128G8NU, 128 GB M.2 | Firmware
    Optical Drive: LG Electronics, HL-DT-ST-BD-RE-BU20N
    Memory Modules: Kingston, DDR3L 1600MHz, MSI16D3LS1KFG/8G
    Webcam: Suyin Corporation, USB 2.0, 1080p
    Touchpad: Synaptics | MSI : Which touchpad is in my notebook & drivers?
    Keyboard: SteelSeries
    Speakers: Dynaudio | Dynaudio and MSI
    Card Reader: Realtek RT55249
    USB 3.0 Host Controller: Intel (HM87 Express Chipset) | USB 3.0 Specification
    Thermal Paste: MX-2
    AC Power Adapter: Delta Electronics Inc., Model: ADP-230EB T, Output: 19.5V DC, 230W Input: 100~240V AC, 50/60Hz universal
    Videos
    [video=youtube;lN_jYTTYsTs]
    How To's:
    Are 'start-up' screens too fast to enter bios? This is how to enter the Legacy / UEFI BIOS.
    Windows 8 Tutorials, Quick Reference Index
    Guide on how to install the NVIDIA Display Driver under Windows 7/Windows Vista
    NVIDIA Driver Rollback/Removal Instructions
    Clean install of Nvidia drivers, NVIDIA Forums> Graphics Technology> GeForce GTX & ION Drivers
    User Benchmark Test Results:
    Other GT72 Thoughts:  (please PM if you have other suggestions.)
    Suggested Backpacks or Cases:
    1.) The Everki Beacon Backpack..... a perfect fit! | At NewEgg | NewEgg Product Tour | At Amazon |
    2.) The Targus 17” XL Backpack | At NewEgg | At Amazon |
    3.) The Everki Lunar Laptop Bag | Everki Lunar Video | At NewEgg | At Amazon |
    4.) The Wenger 17" SwissGear Ibex Backpack | At NewEgg | At Amazon |
    Other Cool Tools or Helpful Additions:
    1.) The Steelseries Sensei Wireless Laser Mouse | At Newegg | At Amazon
    2.) The Steelseries H Wireless Gaming Headset | At Newegg | At Amazon
    Considerably improved over the GT70, purchased from Ken at GenTech PC, I am one of the first official GT72 owners on the planet.
    So, what improvements does the GT72 bring to the table?
     1. Improved chassis design.
     2. Larger touchpad, smooth and seamless with the palm rest.
     3. A large, cool to the touch, glass-like polymer palm rest.
     4. More USB 3.0 ports.
     5. A 230W PA.
     6. A 1080p webcam
     7. Revised Steelseries keyboard, flex-free, with brighter back-lighting.
     8. Dual fan cooling solution, with improved chassis vent design, a better fan control profile, ergo.....
     9. Better overall temps, with quieter operation.
     10. Re-designed chassis, and finally a new model designation.
     11. Gone is the problematic capacitance touch bar, replaced with positive touch switches.
     12. Gone is finicky Optimus switching, replaced with a simple dedicated GPU switch.
     13. mSATA SuperRAID 2, is replaced with M.2 SuperRAID 3, increasing speed, and the capacity of the RAID set. ( M.2 should improve significantly with the Intel 9-Series chipset)
     14. Killer Doubleshot Pro, wherein Ethernet and Wireless can be used independently, or simultaneously for improved bandwidth.
     15. And finally, due to the overall re-design, a more intuitive gaming experience.
    Who amongst you dares to Dominate with the next great 'Weapon Of Mass Destruction'? Join me! Gear Up! Git ur' battle-kit squared away, and I'll see ya on the battlefield!
    ENJOY!
    :D :D :D

    Initial thoughts......
    Well, here it is..... the MSI GT72-2PE Dominator Pro-007US, and the photos below do not do it justice. It's Bold, it's Bad, it's Fast, it's Powerful, and honestly, there is not much, not to like about this notebook. If there is one thing I feel could have been better, it would be the display. The Chi Mei CMN1735 has good brightness, color, and contrast, but lacks decent viewing angles.
    Anyhow, I have already spent a lot of time with tweaking, photos, benchmarks, etc., so I am going to cut-to-the-chase, and try to make this as short as possible.
    As to performance, the benchmarks below attest to the GT72's awesomeness, so what about noise, and the redesigned dual-fan cooling solution? Simply put, it is quieter than the GT70, has a better fan profile, and temps are well managed. Given the hardware, of course you will hear the fans spin up when the system is stressed, but it is not at all disturbing..... and when doing common task, the fans are only noticed if you get close and cozy with the system. Ambient room temperature was 78F, and the system's idle temps were CPU@38C, and GPU@36C. Without the use of Cooler Booster ('stock' fan profile only), during benchmarks the CPU reached 78C, and the GPU averaged 80C, peaking to 82C during the 3DMark Sky Diver benchmark. The palm rest remains cool to the touch, it's polymer is smooth as glass, and it's surface is seamless across the touchpad. Only a mild warmth rises from the keyboard.
    The Steelseries keyboard is indeed flex-free, keys are very positive and responsive, and the back-lighting is brighter..... which I attribute to the keyboard's re-design. Looks awesome!
    So what about SuperRAID 3, is it fast? Oh YEAH! Performance exceeds SuperRAID 2, as expected, and the system boots to desktop in as little as 6 to 7 seconds. HD Tune Pro reports an average read time for the Toshiba M.2 SSD's, as 1535MB/s..... while the previous SuperRAID 2 Sandisk X100 mSATA SSD's was an average of 1411MB/s. On the other hand, SuperRAID 3 really shines in the Crystal Disk Mark scores. To best evaluate the 'Real-World' performance of SuperRAID 3, I used the PCMark 8 Storage Test. For those unfamiliar with this benchmark, the performance score of 5014 is very respectible. The duration of this grueling benchmark is generally 1 to 3 hours, and the GT72 sped through in just 1 hour and 8 minutes. All in all, I applaud MSI's use of the new M.2 SSD's, but I think performance will most improve with future 9-Series Intel chipsets.
    With all the attributes I've mentioned above, it is when gaming, that you understand the mastery of it's intuitive design. The re-designed flex-free keyboard, the large smooth & heat-free palm rest, the spatial Dynaudio speakers, and vivid display, all lend to an immersive gaming experience. So much so, I found myself playing my test game, far longer than originally intended.
    To run the GT72 through it's paces, I chose the recently released, AMD optimized title, Sniper Elite III, by Rebellion. With settings max'ed to 'Ultra', the GTX-880M smoothly sliced through the frames like a hot knife to butter, with frame-rates from 54 to 82Fps, averaging at 65Fps. Game play was extremely smooth and fluid, and never a hic-cup or artifact.
    To represent the 'Out-of-the-Box' experience, I played with the stock fan profile, and Cooler Booster was never used. Like with my benchmark testing, the fan noise was not disturbing, and game audio though the Dynaudio speakers easily comes to the forefront. Fan noise was never a distraction. Temps of the GPU peaked to 82C, but averaged 64C, and the CPU peaked at 68C, averaging 54C. Again, with hardware like this, and without the use of Cooler Booster, these temps are outstanding.... and the new dual fan design is a success!
    Initially I intended my game session to be an hour..... in no time it became 3+ hours, and playing on this notebook is simply FUN!
    The look and feel is very stylish, and smooth finish is actually somewhat fingerprint resistant. Overall, with these great looks, it's fully loaded system specs, and stellar performance scores, the MSI GT72 Dominator Pro not only entitles bragging rights..... it DEMANDS them!
    All of this has me VERY excited for the upcoming next-gen 9-Series, Maxwell, X-treme Edition GT72! Can't wait!
    Enjoy!

  • Optimizing system for best performance/stability and a custom kernel

    I have ArchLinux running on a MacBook 4.1 (early 2008), and it's running very well so far. But I would like to optimize it for best performance and stability (but not at the cost of losing 'graphical interface' quality). I want to compile a custom kernel, and I actually did once, but didn't do it well (and removed it), so I need some help from experts to tell me what should I disable or enable when compiling a custom kernel.
    I will post dmesg and lspci (and rc.conf) here, but if you need any other information, please tell me.
    Thanks.
    Dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd31000 (usable)
    [ 0.000000] BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
    [ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS MB41.88Z.00C1.B00.0802091535 02/09/08
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x7dd31 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 07F000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 07EF00000 mask FFFF00000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-000000007dd31000
    [ 0.000000] 0000000000 - 007dc00000 page 2M
    [ 0.000000] 007dc00000 - 007dd31000 page 4k
    [ 0.000000] kernel direct mapping tables up to 7dd31000 @ 1fffc000-20000000
    [ 0.000000] RAMDISK: 37492000 - 37a41000
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
    [ 0.000000] ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013)
    [ 0.000000] ACPI: FACP 000000007eeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
    [ 0.000000] ACPI: DSDT 000000007eee1000 045C6 (v01 APPLE MacBook 00040001 INTL 20061109)
    [ 0.000000] ACPI: FACS 000000007eecc000 00040
    [ 0.000000] ACPI: HPET 000000007eeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: APIC 000000007eeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: MCFG 000000007eee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SBST 000000007eee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: ECDT 000000007eee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SSDT 000000007eec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000007dd31000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000007dd31000
    [ 0.000000] NODE_DATA [000000007dd2d000 - 000000007dd30fff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b400000-ffff88007d3fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007dd31
    [ 0.000000] On node 0 totalpages: 515264
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 7989 pages used for memmap
    [ 0.000000] DMA32 zone: 503292 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007da00000 s82880 r8192 d23616 u1048576
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507206
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2011044k/2061508k available (4538k kernel code, 452k absent, 50012k reserved, 4308k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty1] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: PIT calibration matches HPET. 2 loops
    [ 0.000000] Detected 2393.995 MHz processor.
    [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.48 BogoMIPS (lpj=7979983)
    [ 0.010013] pid_max: default: 32768 minimum: 301
    [ 0.010061] Security Framework initialized
    [ 0.010069] AppArmor: AppArmor disabled by boot time parameter
    [ 0.010381] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.012201] Mount-cache hash table entries: 256
    [ 0.012567] Initializing cgroup subsys cpuacct
    [ 0.012573] Initializing cgroup subsys memory
    [ 0.012588] Initializing cgroup subsys devices
    [ 0.012592] Initializing cgroup subsys freezer
    [ 0.012595] Initializing cgroup subsys net_cls
    [ 0.012599] Initializing cgroup subsys blkio
    [ 0.012653] CPU: Physical Processor ID: 0
    [ 0.012656] CPU: Processor Core ID: 0
    [ 0.012660] mce: CPU supports 6 MCE banks
    [ 0.012673] CPU0: Thermal monitoring enabled (TM2)
    [ 0.012679] using mwait in idle threads.
    [ 0.015816] ACPI: Core revision 20120320
    [ 0.021231] ftrace: allocating 17820 entries in 70 pages
    [ 0.030546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.064790] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
    [ 0.066663] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.066663] ... version: 2
    [ 0.066663] ... bit width: 40
    [ 0.066663] ... generic registers: 2
    [ 0.066663] ... value mask: 000000ffffffffff
    [ 0.066663] ... max period: 000000007fffffff
    [ 0.066663] ... fixed-purpose events: 3
    [ 0.066663] ... event mask: 0000000700000003
    [ 0.083458] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.103350] Booting Node 0, Processors #1 Ok.
    [ 0.116508] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.116575] Brought up 2 CPUs
    [ 0.116579] Total of 2 processors activated (9579.97 BogoMIPS).
    [ 0.120053] devtmpfs: initialized
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7dd31000-0x7df31fff] (2101248 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7dfe5000-0x7dfe6fff] (8192 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec3000-0x7eec4fff] (8192 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec8000-0x7eecafff] (12288 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7eecc000-0x7eedefff] (77824 bytes)
    [ 0.123629] NET: Registered protocol family 16
    [ 0.123872] ACPI: bus type pci registered
    [ 0.123988] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
    [ 0.123995] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
    [ 0.124001] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
    [ 0.153700] PCI: Using configuration type 1 for base access
    [ 0.153895] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.153899] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.153901] mtrr: corrected configuration.
    [ 0.154568] bio: create slab <bio-0> at 0
    [ 0.154568] ACPI: Added _OSI(Module Device)
    [ 0.154568] ACPI: Added _OSI(Processor Device)
    [ 0.154568] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.154568] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.154919] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.159179] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.160245] ACPI: SSDT 000000007eecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
    [ 0.160625] ACPI: Dynamic OEM Table Load:
    [ 0.160630] ACPI: SSDT (null) 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
    [ 0.160795] ACPI: SSDT 000000007eec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
    [ 0.161153] ACPI: Dynamic OEM Table Load:
    [ 0.161158] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
    [ 0.161186] ACPI: SSDT 000000007eec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
    [ 0.161186] ACPI: Dynamic OEM Table Load:
    [ 0.161186] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
    [ 0.161186] ACPI: SSDT 000000007eec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
    [ 0.161187] ACPI: Dynamic OEM Table Load:
    [ 0.161192] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
    [ 0.161220] ACPI: Interpreter enabled
    [ 0.161220] ACPI: (supports S0 S3 S4 S5)
    [ 0.161220] ACPI: Using IOAPIC for interrupt routing
    [ 0.173742] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.173981] ACPI: No dock devices found.
    [ 0.173988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.174581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.175426] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.175431] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.175436] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.175443] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
    [ 0.175505] PCI host bridge to bus 0000:00
    [ 0.175510] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.175514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.175518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.175523] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
    [ 0.175539] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
    [ 0.175610] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
    [ 0.175631] pci 0000:00:02.0: reg 10: [mem 0x90100000-0x901fffff 64bit]
    [ 0.175645] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.175655] pci 0000:00:02.0: reg 20: [io 0x6110-0x6117]
    [ 0.175712] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
    [ 0.175730] pci 0000:00:02.1: reg 10: [mem 0x90200000-0x902fffff 64bit]
    [ 0.175849] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.175917] pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df]
    [ 0.175971] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.176038] pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf]
    [ 0.176110] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.176140] pci 0000:00:1a.7: reg 10: [mem 0x90704c00-0x90704fff]
    [ 0.176140] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.176140] pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit]
    [ 0.176140] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.176140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
    [ 0.176140] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
    [ 0.176140] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.176140] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
    [ 0.176140] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.176140] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
    [ 0.176140] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.176140] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
    [ 0.176140] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.176140] pci 0000:00:1d.7: reg 10: [mem 0x90704800-0x90704bff]
    [ 0.176140] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.176140] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
    [ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
    [ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
    [ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
    [ 0.176140] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018f
    [ 0.176140] pci 0000:00:1f.1: reg 10: [io 0x6108-0x610f]
    [ 0.176140] pci 0000:00:1f.1: reg 14: [io 0x6124-0x6127]
    [ 0.176140] pci 0000:00:1f.1: reg 18: [io 0x6100-0x6107]
    [ 0.176140] pci 0000:00:1f.1: reg 1c: [io 0x6120-0x6123]
    [ 0.176140] pci 0000:00:1f.1: reg 20: [io 0x60e0-0x60ef]
    [ 0.176140] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
    [ 0.176140] pci 0000:00:1f.2: reg 10: [io 0x60f8-0x60ff]
    [ 0.176140] pci 0000:00:1f.2: reg 14: [io 0x611c-0x611f]
    [ 0.176140] pci 0000:00:1f.2: reg 18: [io 0x60f0-0x60f7]
    [ 0.176140] pci 0000:00:1f.2: reg 1c: [io 0x6118-0x611b]
    [ 0.176140] pci 0000:00:1f.2: reg 20: [io 0x6020-0x602f]
    [ 0.176140] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f]
    [ 0.176140] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.176140] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.176140] pci 0000:00:1f.3: reg 10: [mem 0x90705000-0x907050ff]
    [ 0.176140] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    [ 0.176140] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.176140] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
    [ 0.176140] pci 0000:02:00.0: [14e4:4328] type 00 class 0x028000
    [ 0.176140] pci 0000:02:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit]
    [ 0.176140] pci 0000:02:00.0: reg 18: [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.176140] pci 0000:02:00.0: supports D1 D2
    [ 0.176140] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.183347] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
    [ 0.183358] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
    [ 0.183369] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.183595] pci 0000:03:00.0: [11ab:436a] type 00 class 0x020000
    [ 0.183741] pci 0000:03:00.0: reg 10: [mem 0x90400000-0x90403fff 64bit]
    [ 0.183826] pci 0000:03:00.0: reg 18: [io 0x5000-0x50ff]
    [ 0.184121] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.184581] pci 0000:03:00.0: supports D1 D2
    [ 0.184585] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.184821] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.184828] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
    [ 0.184836] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
    [ 0.184905] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.184934] pci 0000:04:03.0: reg 10: [mem 0x90300000-0x90300fff]
    [ 0.185056] pci 0000:04:03.0: supports D1 D2
    [ 0.185060] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
    [ 0.185137] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.185148] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
    [ 0.185160] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.185165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.185169] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.185174] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.185211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.185419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.185489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.185588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 0.185829] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.186233] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.193405] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.193487] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [ 0.193565] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.193642] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.193720] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 0.193797] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
    [ 0.193874] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.193957] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.196686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.196707] vgaarb: loaded
    [ 0.196709] vgaarb: bridge control possible 0000:00:02.0
    [ 0.196788] PCI: Using ACPI for IRQ routing
    [ 0.197237] PCI: pci_cache_line_size set to 64 bytes
    [ 0.197407] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.197411] reserve RAM buffer: 000000007dd31000 - 000000007fffffff
    [ 0.197573] NetLabel: Initializing
    [ 0.197576] NetLabel: domain hash size = 128
    [ 0.197579] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.197601] NetLabel: unlabeled traffic allowed by default
    [ 0.197632] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.197640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.197648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.210013] Switching to clocksource hpet
    [ 0.222129] pnp: PnP ACPI init
    [ 0.222158] ACPI: bus type pnp registered
    [ 0.222675] pnp 00:00: [bus 00-ff]
    [ 0.222680] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.222684] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.222688] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.222692] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.222696] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.222700] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.222703] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.222707] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.222711] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.222715] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.222718] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.222723] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.222726] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.222735] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.222739] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.222743] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.222746] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.222750] pnp 00:00: [mem 0x80000000-0xfebfffff window]
    [ 0.222859] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.222989] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.222993] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.222996] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.223000] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.223003] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
    [ 0.223006] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.223010] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.223109] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.223115] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.223119] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.223124] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.223129] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.223134] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.223138] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.223145] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.223455] pnp 00:02: [io 0x0300-0x031f]
    [ 0.223473] pnp 00:02: [irq 6]
    [ 0.223541] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
    [ 0.223606] pnp 00:03: [io 0x0000-0x001f]
    [ 0.223610] pnp 00:03: [io 0x0081-0x0091]
    [ 0.223614] pnp 00:03: [io 0x0093-0x009f]
    [ 0.223617] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.223621] pnp 00:03: [dma 4]
    [ 0.223695] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.223710] pnp 00:04: [mem 0xff000000-0xffffffff]
    [ 0.223778] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.223883] pnp 00:05: [irq 0 disabled]
    [ 0.223893] pnp 00:05: [irq 8]
    [ 0.223897] pnp 00:05: [mem 0xfed00000-0xfed003ff]
    [ 0.224002] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.224009] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.224028] pnp 00:06: [io 0x00f0]
    [ 0.224038] pnp 00:06: [irq 13]
    [ 0.224112] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.224132] pnp 00:07: [io 0x002e-0x002f]
    [ 0.224136] pnp 00:07: [io 0x004e-0x004f]
    [ 0.224139] pnp 00:07: [io 0x0061]
    [ 0.224142] pnp 00:07: [io 0x0063]
    [ 0.224145] pnp 00:07: [io 0x0065]
    [ 0.224149] pnp 00:07: [io 0x0067]
    [ 0.224151] pnp 00:07: [io 0x0070]
    [ 0.224154] pnp 00:07: [io 0x0080]
    [ 0.224157] pnp 00:07: [io 0x0092]
    [ 0.224161] pnp 00:07: [io 0x00b2-0x00b3]
    [ 0.224164] pnp 00:07: [io 0x0680-0x069f]
    [ 0.224167] pnp 00:07: [io 0x0800-0x080f]
    [ 0.224170] pnp 00:07: [io 0x0810-0x0817]
    [ 0.224173] pnp 00:07: [io 0x0400-0x047f]
    [ 0.224177] pnp 00:07: [io 0x0500-0x053f]
    [ 0.224180] pnp 00:07: [io 0x1640-0x164f]
    [ 0.224302] system 00:07: [io 0x0680-0x069f] has been reserved
    [ 0.224307] system 00:07: [io 0x0800-0x080f] has been reserved
    [ 0.224312] system 00:07: [io 0x0810-0x0817] has been reserved
    [ 0.224316] system 00:07: [io 0x0400-0x047f] has been reserved
    [ 0.224320] system 00:07: [io 0x0500-0x053f] has been reserved
    [ 0.224325] system 00:07: [io 0x1640-0x164f] has been reserved
    [ 0.224331] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.224346] pnp 00:08: [io 0x0070-0x0077]
    [ 0.224417] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.228737] pnp: PnP ACPI: found 9 devices
    [ 0.228741] ACPI: ACPI bus type pnp unregistered
    [ 0.237540] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.237582] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
    [ 0.237590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
    [ 0.237607] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
    [ 0.237623] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03-03] add_size 200000
    [ 0.237646] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.237652] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.237657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.237662] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.237672] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90800000-0x909fffff 64bit pref]
    [ 0.237678] pci 0000:00:1c.5: BAR 15: assigned [mem 0x90a00000-0x90cfffff pref]
    [ 0.237684] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.237689] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.237694] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.237701] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.237710] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
    [ 0.237718] pci 0000:00:1c.0: bridge window [mem 0x90800000-0x909fffff 64bit pref]
    [ 0.237730] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
    [ 0.237736] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.237746] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
    [ 0.237754] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.237767] pci 0000:03:00.0: BAR 6: assigned [mem 0x90a00000-0x90a1ffff pref]
    [ 0.237772] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.237777] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
    [ 0.237787] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
    [ 0.237795] pci 0000:00:1c.5: bridge window [mem 0x90a00000-0x90cfffff pref]
    [ 0.237807] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [ 0.237816] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
    [ 0.237837] pci 0000:00:1c.0: enabling device (0000 -> 0003)
    [ 0.237918] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 0.237925] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 0.237934] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.237942] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.237946] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.237950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.237954] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.237959] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.237963] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff]
    [ 0.237967] pci_bus 0000:01: resource 2 [mem 0x90800000-0x909fffff 64bit pref]
    [ 0.237972] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 0.237976] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
    [ 0.237980] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.237984] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.237988] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff]
    [ 0.237992] pci_bus 0000:03: resource 2 [mem 0x90a00000-0x90cfffff pref]
    [ 0.237997] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff]
    [ 0.238001] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.238005] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.238009] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.238013] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.238088] NET: Registered protocol family 2
    [ 0.238250] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.239170] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [ 0.241419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.241995] TCP: Hash tables configured (established 262144 bind 65536)
    [ 0.241999] TCP: reno registered
    [ 0.242015] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.242042] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.242207] NET: Registered protocol family 1
    [ 0.242239] pci 0000:00:02.0: Boot video device
    [ 0.242578] PCI: CLS mismatch (256 != 64), using 64 bytes
    [ 0.242662] Unpacking initramfs...
    [ 0.452648] Freeing initrd memory: 5820k freed
    [ 0.456693] audit: initializing netlink socket (disabled)
    [ 0.456719] type=2000 audit(1340724146.456:1): initialized
    [ 0.457302] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.460514] VFS: Disk quotas dquot_6.5.2
    [ 0.460597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.460751] msgmni has been set to 3939
    [ 0.461070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.461121] io scheduler noop registered
    [ 0.461125] io scheduler deadline registered
    [ 0.461224] io scheduler cfq registered (default)
    [ 0.461477] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.461710] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
    [ 0.461950] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.462157] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.462166] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.462198] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.462203] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.462210] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.462242] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.462246] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.462253] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.462369] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.462374] vesafb: scrolling: redraw
    [ 0.462379] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.464035] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004980000, using 3072k, total 3072k
    [ 0.508030] Console: switching to colour frame buffer device 128x48
    [ 0.551844] fb0: VESA VGA frame buffer device
    [ 0.551863] efifb: dmi detected MacBook4,1 - framebuffer at 0x80000000 (1024x768, stride 4096)
    [ 0.551868] intel_idle: does not run on family 6 model 23
    [ 0.551930] GHES: HEST is not enabled!
    [ 0.552035] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.552762] Linux agpgart interface v0.103
    [ 0.552879] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.553759] i8042: No controller found
    [ 0.553878] mousedev: PS/2 mouse device common for all mice
    [ 0.553966] rtc_cmos 00:08: RTC can wake from S4
    [ 0.554165] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 0.554204] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.554221] cpuidle: using governor ladder
    [ 0.554225] cpuidle: using governor menu
    [ 0.554454] TCP: cubic registered
    [ 0.554641] NET: Registered protocol family 10
    [ 0.554976] NET: Registered protocol family 17
    [ 0.554983] Registering the dns_resolver key type
    [ 0.555206] PM: Hibernation image not present or could not be loaded.
    [ 0.555216] registered taskstats version 1
    [ 0.556175] rtc_cmos 00:08: setting system clock to 2012-06-26 15:22:26 UTC (1340724146)
    [ 0.556299] Initializing network drop monitor service
    [ 0.558944] Freeing unused kernel memory: 740k freed
    [ 0.559290] Write protecting the kernel read-only data: 8192k
    [ 0.568413] Freeing unused kernel memory: 1588k freed
    [ 0.572710] Freeing unused kernel memory: 640k freed
    [ 0.586045] udevd[40]: starting version 185
    [ 0.590818] [drm] Initialized drm 1.1.0 20060810
    [ 0.592306] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [ 0.592621] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [ 0.594306] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
    [ 0.594543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 0.595388] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
    [ 0.595444] ACPI: Lid Switch [LID0]
    [ 0.595539] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 0.595547] ACPI: Power Button [PWRB]
    [ 0.595632] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 0.595639] ACPI: Sleep Button [SLPB]
    [ 0.595763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 0.595769] ACPI: Power Button [PWRF]
    [ 0.596508] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
    [ 0.596517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 0.602545] i915 0000:00:02.0: setting latency timer to 64
    [ 0.749351] i915 0000:00:02.0: irq 43 for MSI/MSI-X
    [ 0.749367] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.749370] [drm] Driver supports precise vblank timestamp query.
    [ 0.749462] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.117606] [drm] initialized overlay support
    [ 1.299854] checking generic (80000000 300000) vs hw (80000000 10000000)
    [ 1.299860] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 1.299886] Console: switching to colour dummy device 80x25
    [ 1.301293] fbcon: inteldrmfb (fb0) is primary device
    [ 1.430434] Console: switching to colour frame buffer device 160x50
    [ 1.435865] fb0: inteldrmfb frame buffer device
    [ 1.435868] drm: registered panic notifier
    [ 1.435878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.456696] Refined TSC clocksource calibration: 2393.999 MHz.
    [ 1.456705] Switching to clocksource tsc
    [ 1.821716] usbcore: registered new interface driver usbfs
    [ 1.821753] usbcore: registered new interface driver hub
    [ 1.826806] usbcore: registered new device driver usb
    [ 1.827520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.827588] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.827594] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.827633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.827675] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.831556] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.831587] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
    [ 1.842320] SCSI subsystem initialized
    [ 1.845102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.845354] hub 1-0:1.0: USB hub found
    [ 1.845362] hub 1-0:1.0: 4 ports detected
    [ 1.845549] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.845555] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.845572] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.845613] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.847254] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.850589] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.850624] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
    [ 1.851193] libata version 3.00 loaded.
    [ 1.860054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.860280] hub 2-0:1.0: USB hub found
    [ 1.860289] hub 2-0:1.0: 6 ports detected
    [ 1.860472] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.860478] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.860494] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.860539] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
    [ 1.860750] hub 3-0:1.0: USB hub found
    [ 1.860757] hub 3-0:1.0: 2 ports detected
    [ 1.860892] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.860898] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.860912] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.860965] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
    [ 1.861172] hub 4-0:1.0: USB hub found
    [ 1.861178] hub 4-0:1.0: 2 ports detected
    [ 1.861312] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.861318] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.861332] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 1.861366] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
    [ 1.861578] hub 5-0:1.0: USB hub found
    [ 1.861585] hub 5-0:1.0: 2 ports detected
    [ 1.861717] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.861723] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.861744] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 1.861795] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
    [ 1.862003] hub 6-0:1.0: USB hub found
    [ 1.862010] hub 6-0:1.0: 2 ports detected
    [ 1.862142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.862148] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.862165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 1.862200] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
    [ 1.862411] hub 7-0:1.0: USB hub found
    [ 1.862417] hub 7-0:1.0: 2 ports detected
    [ 1.862917] ata_piix 0000:00:1f.1: version 2.13
    [ 1.862932] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 1.862937] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 1.862993] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.869158] scsi0 : ata_piix
    [ 1.874884] scsi1 : ata_piix
    [ 1.875449] ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
    [ 1.875454] ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
    [ 1.875665] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
    [ 1.875722] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.881780] scsi2 : ata_piix
    [ 1.887944] scsi3 : ata_piix
    [ 1.888739] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
    [ 1.888745] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
    [ 2.033862] ata1.00: ATAPI: MATSHITADVD-R UJ-867, HB01, max UDMA/66
    [ 2.065117] ata1.00: configured for UDMA/66
    [ 2.065887] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCAC3GP, max UDMA/133
    [ 2.065893] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.067318] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HB01 PQ: 0 ANSI: 5
    [ 2.077869] ata3.00: configured for UDMA/133
    [ 2.078045] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCA PQ: 0 ANSI: 5
    [ 2.087306] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
    [ 2.087313] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.088645] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 2.093226] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.093312] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.093318] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.093371] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.184704] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 2.184707] sda3: <bsd:bad subpartition - ignored
    [ 2.184709] bad subpartition - ignored
    [ 2.184710] bad subpartition - ignored
    [ 2.184712] bad subpartition - ignored
    [ 2.184713] >
    [ 2.185557] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.260045] usb 2-4: new high-speed USB device number 2 using ehci_hcd
    [ 2.770036] usb 3-1: new full-speed USB device number 2 using uhci_hcd
    [ 2.948125] usbhid 3-1:1.0: couldn't find an input interrupt endpoint
    [ 2.948381] usbcore: registered new interface driver usbhid
    [ 2.948385] usbhid: USB HID core driver
    [ 3.170028] usb 7-1: new low-speed USB device number 2 using uhci_hcd
    [ 3.179293] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.576705] usb 7-2: new full-speed USB device number 3 using uhci_hcd
    [ 5.022890] udevd[198]: starting version 185
    [ 5.426262] applesmc: SIS!ui16\xffffffc0\xffffffa6: read arg fail
    [ 5.562551] applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0
    [ 5.562558] applesmc: init_smcreg() took 50 ms
    [ 5.584285] input: applesmc as /devices/platform/applesmc.768/input/input5
    [ 5.658889] lib80211: common routines for IEEE802.11 drivers
    [ 5.658894] lib80211_crypt: registered algorithm 'NULL'
    [ 5.711977] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.924357] wl: module license 'Mixed/Proprietary' taints kernel.
    [ 5.924364] Disabling lock debugging due to kernel taint
    [ 5.946193] INFO @wl_cfg80211_attach : Registered CFG80211 phy
    [ 6.001836] lib80211_crypt: registered algorithm 'TKIP'
    [ 6.002152] eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.112
    [ 6.084085] Linux media interface: v0.10
    [ 6.133183] iTCO_vendor_support: vendor-support=0
    [ 6.134458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 6.134601] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
    [ 6.134703] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.156626] ACPI: Battery Slot [BAT0] (battery absent)
    [ 6.163544] ACPI: AC Adapter [ADP1] (on-line)
    [ 6.164216] ACPI: Requesting acpi_cpufreq
    [ 6.173706] Monitor-Mwait will be used to enter C-1 state
    [ 6.178506] Monitor-Mwait will be used to enter C-2 state
    [ 6.183424] Monitor-Mwait will be used to enter C-3 state
    [ 6.183457] Marking TSC unstable due to TSC halts in idle
    [ 6.183507] ACPI: acpi_idle registered with cpuidle
    [ 6.183963] Switching to clocksource hpet
    [ 6.210896] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
    [ 6.210909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.242033] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 6.275396] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
    [ 6.338786] Linux video capture interface: v2.00
    [ 6.426865] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
    [ 6.429319] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
    [ 6.429831] usbcore: registered new interface driver uvcvideo
    [ 6.429835] USB Video Class driver (1.1.1)
    [ 6.496844] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 6.587003] sky2: driver version 1.30
    [ 6.587217] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
    [ 6.587761] sky2 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 6.588473] sky2 0000:03:00.0: eth1: addr 00:22:41:21:43:0c
    [ 6.654740] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
    [ 6.655770] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 6.661489] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 6.700987] udevd[214]: renamed network interface eth0 to wlan0
    [ 6.824841] hda_codec: ALC889A: SKU not ready 0x400000f0
    [ 6.827442] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    [ 6.848101] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 6.850714] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 6.942266] appletouch: Geyser mode initialized.
    [ 6.942380] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10
    [ 6.942768] usbcore: registered new interface driver appletouch
    [ 6.996893] firewire_core 0000:04:03.0: created device fw0: GUID 002241fffe41d624, S400
    [ 7.131526] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
    [ 7.135766] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input11
    [ 7.136230] apple 0003:05AC:0229.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
    [ 7.139354] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input12
    [ 7.139526] apple 0003:05AC:0229.0003: input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
    [ 7.423516] usb 3-1: USB disconnect, device number 2
    [ 7.650081] usb 3-1: new full-speed USB device number 3 using uhci_hcd
    [ 8.322211] Bluetooth: Core ver 2.16
    [ 8.322655] NET: Registered protocol family 31
    [ 8.322660] Bluetooth: HCI device and connection manager initialized
    [ 8.322665] Bluetooth: HCI socket layer initialized
    [ 8.322669] Bluetooth: L2CAP socket layer initialized
    [ 8.322680] Bluetooth: SCO socket layer initialized
    [ 8.359817] usbcore: registered new interface driver btusb
    [ 9.183365] EXT4-fs (sda2): re-mounted. Opts: (null)
    [ 9.336886] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.377553] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 9.380170] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 9.497613] Adding 4184928k swap on /dev/sda5. Priority:-1 extents:1 across:4184928k
    [ 11.804445] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 11.845740] Bluetooth: RFCOMM TTY layer initialized
    [ 11.845751] Bluetooth: RFCOMM socket layer initialized
    [ 11.845755] Bluetooth: RFCOMM ver 1.11
    [ 12.221084] fbsplashd.stati[78]: segfault at 2c ip 000000000040579b sp 00007f2267333d00 error 4 in fbsplashd.static (deleted)[400000+233000]
    [ 24.154605] sky2 0000:03:00.0: eth1: enabling interface
    [ 24.155329] ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 28.831988] EXT4-fs (sda2): re-mounted. Opts: commit=0
    [ 28.933444] EXT4-fs (sda6): re-mounted. Opts: commit=0
    [ 29.363373] wlan0: no IPv6 routers present
    [ 30.487575] sky2 0000:03:00.0: eth1: disabling interface
    [ 30.500233] sky2 0000:03:00.0: eth1: enabling interface
    [ 30.501015] ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 40.563473] wlan0: no IPv6 routers present
    [ 45.535875] fuse init (API version 7.18)
    [ 70.827136] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 70.867639] ISO 9660 Extensions: RRIP_1991A
    [ 398.754336] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 398.776167] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 422.037689] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16396 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 422.311888] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16397 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 422.859975] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16398 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 423.955325] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16399 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 426.147338] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16400 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 430.531638] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16401 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
    00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)
    03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)
    04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61)
    /etc/rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # See 'man 5 rc.conf' for more details
    # LOCALIZATION
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Skopje"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    LOCALE="en_GB.UTF-8"
    DAEMON_LOCALE="yes"
    USECOLOR="yes"
    # HARDWARE
    MODULES=(applesmc wl uvcvideo)
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="no"
    # NETWORKING
    HOSTNAME=stefan.local
    interface=
    address=
    netmask=
    broadcast=
    gateway=
    NETWORK_PERSIST="no"
    # DAEMONS
    DAEMONS=(syslog-ng sensors dbus network @firestarter @bluetooth crond cmp-daemon gdm @wicd alsa)
    Thanks

    Army wrote:
    This might not help you a lot, but if you want a stable system, try using packages from the repo wherever possible, look at the news before you update your system and don't mess things up (like bad configuration etc.).
    When it comes to performance, you won't gain much by compiling linux by yourself! Just use the linux package from [core] or if you want a bit more performance, install the ck-kernel from
    [repo-ck]
    Server = http://repo-ck.com/$arch
    (this has to go to the bottom of /etc/pacman.conf)
    (use that one which is best for your cpu (in your case this might be the package linux-ck-corex).
    Hmmm, Linux-ck-corex doesn't even load.. I am now trying to install the generic one. Hope it works.
    Edit: I will first try linux-lqx...
    Last edited by exapplegeek (2012-06-26 18:33:31)

  • STIII Force (TM) Thermal Compound First Impressions Exclusive! for nFo

    Ok here is a first picture of STIII (TM). This newest product of the popular series is the most advanced yet it is a Technology breakthrough. This is the First Liquid Termal compound. It has come through excesive lab testing (still final packaking and marketing of the product is to be done).
    features:
    Liquid never dries out evaporation at 500 C
    Excellent Thermal Properties, decrease you CPU Temperature up to 11 C
    Cool Color and Tropical fruits Odor. Color different than STI & II because its liquid form
    Can also be injected via drill hole to heat sink to increase heatsink performance up to 40%
    Due to this technique (see pic above) any low cost aluminum heatsink can be used with excellent results
    Cost effective solution no need for expensive and bulky HSF
    Will not work for Intel CPUs or VIA chipsets motherboards (see purchase agreement). Exclusive only for AMD CPUs and nForce MBs
    Fitted with nanorobots which actually identify CPU and chipset. CAUTION!! if applied in an intel cpu or other chipset than nForce STIII Force (TM) is turned into explosive liquid which detonates at 45 C!
    Order now!
    price at 29 US$ (incl VAT).
    Markoul Laboratories (c) Inc.

    Manolis,
    I give the regulars from the old nForce forum plenty of lattitude, I just ask thet you keep the O.T. and the like posts to a minimum.  MSI saw the need for people to have fun and post whatever they want and dedicated a forum to it.
    Do not abuse the forum.  I need to keep it running on topic 99.9% of the time.
    Richard

Maybe you are looking for

  • BPC 10.0 Unrestricted availability to customers

    Dear Experts, Our client is asking us to implement BPC 10.0 for SAP NW I checked the SMP and saw that it is in Acitve Ramp-up stage and it says Restricted availability productive use allowed. When I went to SWDC to download, I don't see the software

  • Can't get my ring tones back still

    Why after the new iOS update I still cannot retrieve my ring tone it says that my device was not affected and I went from a 4s to a 6 and I still can't get them back

  • Mass change of Distribution Channel

    Hi, I want to update Distribution channel field as 10 for all Finished material.... is there any way to upload those materials at a time... i cant do it using LSMW upload.... and i tried using MASS, that is also not possible... Regards smitha

  • Changing Calendar Alarm Tone

    Hi, I have a Nokia 6085 cell phone. I was wondering if anybody knows how to change the ring tone for a calendar setting? I also don't know how to change the ring tone for the alarm setting either. Any suggestions? Thanks,

  • Creating font for a different dpi

    Using Visual Studio 2008 for our project C++..  Trying to create/select a font at a different dot per inch (dpi) . We calculate the font height with this line..    dot per mm * 25.4 = dpi. m_pLF->lfHeight = (long)(-item.GetFontSize() * theMachine.Get