GTA IV via bootcamp

Dear all,
I am trying to run GTA IV via bootcamp and Windows XP sp3. The game loads fine and plays well for a while then crashes. I had a similar problem with my desktop pc but managed to fix the problem by updating the Nvidia 9400 drivers. However the Nvidia website does not have the update for the Geforce 9400M and it recommends looking at the OEM supplier website.
Does anybody have a suggestion of how to stop the game crashing?
or does anybody know where I can find the correct drivers for the graphics card in the new macbooks.
I have checked the minimum requirements to run the game and unless I am missing something obvious it should meet all the specs.
Sorry if this is in the wrong section.
Thanks in advance

Hi and welcome to Discussions,
check with the drivers supplied here: http://www.laptopvideo2go.com/
They usually have latst Nvidia drivers adapted to work with Notebooks.
And yes, you are in the absolutely right section with questions like these.
Take care
Stefan

Similar Messages

How do I get Windows 8.1, run via Bootcamp, to detect an external HDMI display

Good afternoon,
So earlier today, I managed to install Windows 8.1, via Bootcamp, on my 15' MBP retina with Iris pro 5200 integrated graphics (Late 2013). I cannot figure out how to get the dang thing to recognize my TV through an HDMI cable. I did have it kinda sorta working the first time I installed Windows on my MBP with bootcamp, but that installation failed. What do I need to do to fix this problem?
Summary:
Using a 15' MBP retina with Iris Pro 5200 graphics. This is not the model with the nvidia graphics card.
This current installation seems to be working without too many problems.
Windows 8.1 will not detect my tv, and yes, the HDMI cable is plugged into both the TV and the MBP.
Why is Windows on my MBP failing? It seems like everything is set up properly.
(I know I could do some weird combination of Thunderbolt to eventually HDMI, but I have not tried this)
I simply want to plug an HDMI cable into my TV and my MBP.
I do have a regular windows desktop, and this works without any problems (besides being windows)
Thanks for any help you guys can offer.

with my imac it worked as automatically as in OS X my video card is amd though and the monitor is dvi rather then hdmi

MacBook Air (Mid 2013) Windows 8 via Bootcamp

Hey guys,
Just wanted to know if there was anybody who was able to install Windows 8 (or even Windows 7) on their new MacBook Air.
I heard from somebody that installing Windows via bootcamp was different for this model.
First of all,he said that you are unable to install Windows 7/8 with a CD--although it is possible, he said that you will incur with some prolems during installing, he said the trackpad and keyboard will be not functioning.
Anyways, there were many other problems he told me...
Anybody installed it? Were there any problems?

Well you must actually say what you mean. DVD or 8GB flash drive. Whether you have a USB-DVD Apple SuperDrive or something else.
BCA should walk you through. And, it has instructions! a guide to read and printout.
http://www.apple.com/support/bootcamp
FAQ http://support.apple.com/kb/HT5639
How can I install Windows 8 on an eligible computer?
Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide.
Can I use an upgrade from Windows 7 to Windows 8?
Yes. Download and install the Boot Camp 5 Support Software before attemping the upgrade by using the Boot Camp Assistant in OS X Mountain Lion v10.8.3. Alternatively, you can manually download the Boot Camp 5 Windows Support Software here.
When I do an upgrade install from Windows 7 to Windows 8, an "Uninstall USB 3.0 eXtensible Host Controller Driver" message appears. What do I do?
Do not click on Uninstall. Click the back button and Cancel the upgrade. Download the Boot Camp 5 Support Software by using the Boot Camp Assistant in OS X Mountain Lion v10.8.3, or click here to download them. Then, try the upgrade again. See this article for more information.
After upgrading from Windows 7 to Windows 8, Thunderbolt devices are (not) being recognized when I connect in. How do I fix this?
Disable the Windows 8 Fast Boot feature to allow Thunderbolt devices to be recognized. See Boot Camp: Thunderbolt devices not recognized after Windows 8 upgrade for instructions.
Is there an OS X version requirement to use the Boot Camp Assistant to download Boot Camp 5 Support Software?
You need OS X Mountain Lion v10.8.3 or later installed to download the Boot Camp 5 Support Software (Windows drivers) using the Boot Camp Assistant. After upgrading, click the Go menu and choose Utilities. Then, open Boot Camp Assistant and follow the onscreen instructions. You can download the Boot Camp Installation & Setup Guide.
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software. How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.
Model-specific Questions
I receive a "Free up space on Drive C" message when I try to do an upgrade install from Windows 7 to Windows 8 on my MacBook Air (11-inch, Mid 2012). Why am I seeing this?
There is not enough free space available to do an upgrade install with the 64 GB SSD configuration. Delete the Boot Camp partition and do a full install instead. See this article for more information.
I see a black screen or distortion when I install Windows 8 on a MacBook Pro (Retina, 13-inch, Late 2012). How do I fix this?
The Windows 8 installer does not contain the correct graphics driver for your computer. You'll need to attach the USB media that contains the Boot Camp drivers during installation to address this issue. See this article for more information.
The volume controls keys (F1 and F2) won't work on my iMac (Mid 2011). How do I control the volume?
Use the Settings Charm to control screen brightness. See this article.
My MacBook Air (Mid 2012) will not start Windows 8, or displays VGA graphics when it stats up. How can I fix this?
Your MacBook Air (Mid 2012) needs an EFI Firmware update to address this issue. Download and install the MacBook Air EFI Firmware Update 2.6.
I see a "Windows 8 is not supported on this Mac" message on my Mac. Can my Mac run Windows 8?
For a complete list of Mac computers and the Windows operating systems they support, click here.

I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

Is it possible to create a Windows 7 Partition via Bootcamp while having an internal RAID 0 Setup ?

Is it possible to create a Windows 7 Partition via Bootcamp while having an internal RAID 0 Setup ?

Yes, just not on the RAID. Boot Camp Assistant will only partition a single drive containing OS X. You cannot partition a RAID array.

USB gaming mouse unrecognized by Windows 7 Pro (via BootCamp)

Hey,
I bought a Zowie EC1 Gaming USB mouse. But when I plug it into my MacBook Pro 15" running Windows 7 Pro (via BootCamp), then the mousewheel flashes blue shortly for 1 second or so, and the driver installation process starts. After awhile it says hardware unsuccesfully installed. And when I re-plug the mouse in the same USB port it says unrecognized.
I think maybe it's just some buggy drivers? Anybody experienced something similar with other mice maybe? Or know how I solve this problem.
Kind regards,
Simon

I looked around on the web and read a bit about your Zowie EC1. It's a very nice mouse that I need to put on my Christmas list
But it seems that it should be recognized by Windows as a normal USB mouse and install generic drivers. I have a couple of questions:
1) Are there any Windows Updates for your hardware waiting to be installed?
2) Do you have all the Apple Boot Camp drivers installed? Apple just released 3.3 if you're not on Lion (which is 4.0)

Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.

9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it.

I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

There is no need for anyone to use 32-bit version anymore.
Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
Better support for today's hardware with larger video graphic memory and systems.
Better memory management.

Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

Can't boot into Mac OS after Windows install via Bootcamp

Hello.
Last night I installed Windows 7 on my Macbook Pro early 2011 via Bootcamp.After some major complications I was able to finally install Windows 7 and boot into it. Now I can't boot back into my "Macintosh HD" partition, it shows a no entry sign.
Hard Disk : 320GB Internal Sata
Partitions : 3 -> Mac, Bootcamp and 10.8 Recovery Partition
The good part is that I can still access the Mac OS partition in Windows and Windows is working perfectly fine. As a matter of fact right now I'm on the bootcamped windows.
I have a full time machine backup but still I am looking for a way to solve this without formatting the HDD.
Things I have tried:
1. Resetting NVRAM and PRAM
2. Booting into 10.8 recovery partition and running DU.
SMART Status : Verified
"Macintosh HD" grayed and Not Mounted
Successful Verify Permissions (Twice)
Is there a way to solve this? Though the Mountain Lion partition shows when I press the Alt/option key on startup but I can't somehow boot into it.
Thanks

Your problem is OS X is refusing to boot.
There is still a bootable volume on the Macintosh HD partition, it's just not working.
You can #8 Reinstall Just OS X while command r booted from the Recovery partition, as long as you don't use Disk Utility to erase the Macintosh HD partition, your files and programs remain.
Hook the computer via Ethernet cable to a router (or modem, power reset required) with a fast relaible internet connection, you will need your AppleID and password to reinstall OS X.
Step by Step to fix your Mac

I have loaded windows 8.1 via bootcamp on my macbook air 11 inch how can i adjust font size etc

I have loaded windows 8.1 via bootcamp on my macbook air 11 inch how can i adjust font size. I have to do a lot of work in office 2013 and it is very very difficult to see the screen.
Thank you

Microsoft store will provide a download manager (.exe) using your Product Key, which needs to be run on a PC. This manager will then let you download an ISO image to a USB and/or DVD.

3D Vision via bootcamp on Mac mini (continued)

Hi
Before I read this archived thread,
3D Vision via bootcamp on Mac mini
https://discussions.apple.com/thread/2545736?start=0&tstart=0
I downloaded the latest NVIDIA driver 285.62 for my Mac mini server
(2010,GeForce 320M graphic chip)
for testing hdmi 1.4a frame-packing 3D output under windows7 x64 Boot Camp.
First time,I tried the NVIDIA driver with “recommended install” option,
then it output black screen, I can’t do anything,
so I entered the safe mode,
recover to the origin driver come with Boot Camp 4.01.
I find some suggestion from someone’s experience by Google,
second time, I tried the “Custom install-whole new install”
(or something like this, I did it under international version),
it passed the part where first time fail,
It seems OK then installation completed and reboot.
After reboot,
I can’t enter the boot camp partition by pressing “option”during restart,
The list of choosing HDs or recovery HD option not shown at all,
it just boot into OSX,
I can still see boot camp partition under “Finder”,
but boot camp is gone under Startup Disk control panel.
After repair procedure of Disk Utility,
the boot loader still not shown
& boot camp still gone under StartupDisk control panel.
The driver seems damaged the boot partition table.
I think I need to re-create the Boot Camp partition
and re-install windows 7 again!
Above is my foolish experience.
The question is:
Is there anything I can try to recover my boot loader?
What’s the version of driver successfully support 1920x1080 24p 3D output?
Is the newest NVIDIA driver 285.62 available for mac mini
by modded.inf method mentioned from the archived discussion?
Thank you~

After updating NVidia driver newer than 267.76,
I got black screen after Windows Logo shown during reboot.
After countless annoying tests,
I installed the newest NVidia 285.79 driver without problem finally.
My original prefered display configuration:
link the primary monitor with HDMI port
I already followed the GeForce Driver Installation Guide, step by step,
http://forums.nvidia.com/index.php?showtopic=169555
but there's still black screen after reboot.
THEN, I TRIED TO USE mini-DISPLAY PORT INSTEAD AND REBOOT AGAIN,
video signal was connected to my DELL 2707W(only DVI port)
by MiniDP to HDMI adapter/HDMI-DVI cable.
The display is NORMAL NOW !!
Root Cause assumption:
Maybe the driver newer than 267.76 always regard miniDP as primary signal output port,
even if you set the HDMI port as primary.
I think this is a serious bug, but no solution after mote than 30 driver updating.
The following configuration worked on my Mac mini 2010 system:
mini─miniDP to HDMI adapter─
HDMI cable to HDMI splitter─┬HDMI-DVI cable─Dell 2707
                                              └HDMI cable─ 3D projector
but I found that the configuration can't play 3D video...
So I changed the configuration to:
Mac─miniDP to HDMI adapter─HDMI-DVI cable─Dell 2707
      └HDMI cable─ 3D projector
For your reference.

Cannot install Windows 8.1 via bootcamp. (Solved)

I have tried installing via bootcamp and I got an error, I didn't take a picture but it said something about not setting the right boot up?
I also tried the method of removing the partion and creating a new partion called BOOTCAMP in exFat. I cannot boot it using the BIOS Method because it says I have no bootable drives. When I select the EFI partion I get the windows installation but I got an error stating that I have an MBR table and that windows doesn't suport it.
What's the best way to install windows 8.1?
I have a macbook pro retina (Late 2013).
Edit: I am installing again using the normal bootcamp method. (No intteruptions)
Edit:2 I sucuessfully passed the installation now it just restarted.
Edit:3 I sucuessfully installed Windows 8.1! In the installation meantioned in edit 1 I used an old .iso that I had from december 2013, I had problems when I created an .iso from windows 7. If you have problems try chaning your .iso.

Some people have been successful installing 8.1 (me, for instance) despite it not being supported. However this seems to be hardware dependent.
I would have expected the normal WININSTALL option to be available on a Bootcamp-created USB, not just the EFI boot option.
It really depends on whether Bootcamp is creating a hybrid MBR when it creates the Bootcamp partition. Some later model Macs do not. On the Macs that do not create the hybrid MBR Windows may install in EFI mode.
If you remove everything and stretch the Macintosh HD back to the full size of the disc again then reboot and when the system restarts begin the Bootcamp installation again but do not let it restart at that time, you can then run the following code in the terminal and report its output we will be able to see if a hybrid MBR has been created (this is after the partition has been created by Bootcamp, but before it reboots).
sudo fdisk /dev/disk0

I need the windowns ISO file to install windows 7 via bootcamp on my MBA. i have the windows 7 home install disc...how do i find the ISO file

where do i find the ISO file needed to install windows 7 home via bootcamp??

try asking in the Boot Camp forum: https://discussions.apple.com/community/windows_software/boot_camp. Good luck.

Unable to install Windows 7 via Bootcamp on MBP mid-2012

Posted here from my original, since the old one was basically in the wrong thread. https://discussions.apple.com/message/25097756#25097756
I have a mid-2012 Macbook Pro 13" with the 2.9ghz i7 configuration, 8gb ram, intel HD 4000, Crucial M4 256gb SSD, and the original 750gb hard drive that was included in the computer. I made the SSD my boot disk.
I've been trying to install Windows 7 via bootcamp for a few days now. The first time I tried it I walked away from the computer after it got to the "Copying files" part of the windows 7 installation so I wasn't able to see what went wrong. When I try to start the computer it goes to the blank DOS screen (or terminal, whatever you prefer to call it) with the flashing cursor for text but I cannot enter anything and it just sits there. So I figured something may have gone wrong with the installation and I tried to do it again.
I re-wiped my 8gb flash drive, redownloaded the boot camp support files, and again started the installation with windows 7. The first time I tried it I had to reformat the "BOOTCAMP" partition that it had created on my SSD because it wouldn't write to it as it was not formated in NTFS. I spared 60gb for the Windows boot. So after reformatting I went through with the installation again. Now I get to the screen where it asks me what username, etc. After I finish entering in my credentials it starts to say "preparing desktop" and then I hear a loud CLICK and the entire machine just reboots and takes me back to the blinking cursor. Is this a common problem when trying to install windows? Thanks!

Have you modified BC Info.plist? Can you verify that you a valid ISO using Microsoft FCIV tool?
Your Windows 7 USB should have a directory structure similar to the following.

GTA IV via bootcamp

Similar Messages

Maybe you are looking for