GTA Vice City under Wine

I am trying to play GTA Vice City under Wine with the help of this page: http://appdb.winehq.org/objectManager.p … n&iId=3050 and I've faced a problem. It's regarding input, basically my character always runs forwards and the camera spins all the time. Also, pressing "shift" to run doesn't work. This does not happen when I'm in a vehicle. I've tried to change the key mappings but it still doesn't work. This issue was reported to that AppDB page I gave the URL to, but it involves udev.rules and I couldn't get it working

The one thing you don't seem to have done is contact the app's developer, who is the only person who can solve the problem (if anyone can.)

Similar Messages

  • I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its annoying.

    I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its frustruating.

    Hi...
    Apple's policy states that, "all sales are final" >  iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    But since you are not getting any help from the developer, you can use the email form to contact Apple and ask for a refund >  Apple - Support - Mac App Store - Contact Support.
    No guarantees.

  • GTA Vice City won't even start?

    So i just downloaded GTA vice city and it took enough to install so when it finished i tried to start it and at the same second it turns on and then off, basiclly won't even start. Has anyone gotten the app already and tried it out? Maybe solution for my problem?

    It's possible you simply have a defective battery. Try going down to your local Apple Store and try one of their batteries in your MBP. If it works then simply replace it.

  • Cannot Download GTA:Vice City

    I am having problems purchasing GTA: Vice City from the MAS.
    Other purcahses are working fine. However, when I open the GTA:VC page in the MAS, no screenshots show up and I cannot interact at all with the price/buy button.
    I am wondering if this has anything to do with the 17+ rating. No parental controls are on.
    Ideas?

    The one thing you don't seem to have done is contact the app's developer, who is the only person who can solve the problem (if anyone can.)

  • Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

    Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

    You can only install games that are in the iTunes app store on your computer and the App Store app directly on the iPad - if there are games like those that you mention in your country's store then you can buy and install them. Have you had a look in your country's store ?

  • TS1702 gta vice city not downloading

    It says i have 1.8 gb free but that isnt enough

    To download and install an app the iPod needs storage available equal to about three times the file download size.
    If you sync from your iTunes library less storage available is required.
    Does the app/iPod meet this?

  • GTA Crash City Bl

    Hi folks
    GTA vice city is crashing whenever it feels like it.
    I've tried everything mentioned in the stickies..
    I've tried every tip I've managed to find through Google..
    Half Life plays with no problems whatsoever
    Micro$oft Combat Flight Simulator has a few sound issues but it doesnt crash..but rather echoes and pops a bit.. I can li've with that..
    Direct X is the latest version..
    SB drivers are the latest version..
    I've re-installed the game..
    I've reinstalled the sound drivers a million times..and used a utility to remove all traces of them too
    (dri've cleaner pro)
    I've de-fragged my hard dri've
    made sure the page file is the correct size
    Ive tried all video options AND sound options in the game
    theres no IRQ conflicts
    DXDiag says theres no problems
    I get no warning the game is going to crash..its completely random it seems..any time from 0 seconds to 30 minutes maximum..
    It was working fine with my old card..a SB28
    Any help here would be gratefully received..but I'm not holding my breath.. I can't see what else I can do..apart from forgetting about this game..which is a great pity because it's one of my favourites..

    It's possible in theory, but Windows does not always like having 2 sound devices installed. You would need to set which one you are using in Control Panel > Sounds & Audio Devices. It may work though as they use different drivers, but it isn't really supported.
    The current patch for GTA: VC seems to be specifically to address certain graphic corruption issues, so unless you're experiencing that (aswell), it shouldn't address the problem you're having now. There is one reference on the Rockstar website to crashing when the game starts (with certain Radeon chipsets). You say it worked fine with the PCI28, was that on the exact same configuration and Windows install? (so the only different is the soundcard model)
    Cat

  • Error on installing iTunes under Win 8

    Error on installing iTunes under Win 8
    I have recently upgraded to Win 8.  When installing iTunes the following error shows:
    "An error occurred during the installation of assembly 'Microsoft.VC80.CRT.type="win32",version"8.0.50727.4053.publicKeyToken="1fc8b3b 9a1e18e3b",processorArchitecture="amd64". Please refer to Help and Support for more information HRESULT:0x80073715.
    I am running the ITunes x64 install.  I have installed the V++ redistributable with no change in result.
    I have subsequently downloaded and manually installed via the Apple Software update program iTunes.  However this does not allow my iPad to be connected as it is not the x64 version.

    After spending an entire day on this issue, I figured out something that worked.  After installing Windows 8 (64-bit) then Visual Studio 2012 (or 2013) then the latest 64-bit iTunes app, I got the 0x80073715 error.
    What finally worked for me was:
    1) Get all the Windows updates and hotfixes - especially the ones for Visual Studio.
    2) Go to http://www.microsoft.com/en-us/download/details.aspx?id=14431 and download the "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update"
    3) Only install vcredist_x64.exe.
    After running these steps, I was able to completely install iTunes on my Windows 8 64-bit instance. 
    Hope this helps.

  • No sound on Audigy 2 ZS under Win XP, under Linux

    Hi,
    I have an Audigy 2 ZS installed on my AMD 64 3500+, Board Asus A8N-SLI Deluxe (BIOS 0). I first installed Win XP, Sound drivers and everything worked fine, then installed SUSE Linux 9.3 (x64-Version), and everything was fine too. After a while, under Win XP the sound card stopped working. I don't remember what I changed in my config, but I couldn't get it working again under XP. Under Linux everything is still ok.
    I even reinstalled XP, and still there's no sound. Strange thing is, that the drivers install perfectly and everything on the system seems to be ok, but there's no sound neither on digital-out nor analog.
    Any ideas would be greatly appreciated.

    I tried both, disabling, enabling.
    Currently there's a digital sound system with external decoder connected to it (Creative Soundworks DTT3500 Digital), as well a 5. analog Headphone, so all jacks execept line in are connected. Headphones and sound system is ok, I tested that on other PCs.

  • Lenovo Fingerprint Software stopped working under Win 8.1

    Just upgraded to Win 8.1 (64-bit) and to the latest drivers for W700 (2753-WBB). 
    Major trouble with the Thinkvantage Fingerprint Software.
    The Lenovo Fingerprint Software version 3.3.2.50 for Win 7 (64-bit) was fine under Win 8.0
    but it doesn't work any more under Win 8.1
    http://support.lenovo.com/en_US/downloads/default.page?
    The Thinkvantage Fingerprint Software isn't compatible with W700 and W700ds.
    Thinkvantage Fingerprint Software Version 5.9.9.7282 for Windows 8 (64-bit) or 7 (64-bit)
    supports only the ThinkPad W510, W520, W701, W530 systems
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029769
    Thinkvantage Fingerprint Software Version 6.0.0.8102 for Windows 8.1 (64-bit or 32-bit)
    supports only the ThinkPad W510, W520, W701, W530 systems
    http://support.lenovo.com/en_US/detail.page?DocID=DS036923
    The management of complex passwords becomes difficult without Fingerprint.
    Any ideas?? Thank you.

    Hi Katiedonut,
    I’m writing to just check in to see if the suggestions were helpful. If you need further help,
    please feel free to reply this post directly so we will be notified to follow it up.
    If you have any feedback on our support, please click here.
    Best Regards,
    Anna
    TechNet Community Support

  • PSE 7.0 Invalid Serial Number under Win 8.1

    Moved from a Dell PC running Win XP SP3 to an HP with an 3.80 GHz AMD 6200 6 core processor, 10 Gb RAM running Win 8.1. Had installed PSE 7.0 four or five years ago on the Dell - it meets my limited needs and I don't really want to upgrade. I re-installed PSE 7.0 (from the Adobe download site) and registered the product on Adobe.com. However, the program refuses to accept the serial number, claiming it is "not valid." Tried Adobe chat and Manoj Kumar confirmed the serial number was valid. However, he then stated that PSE 7.0 is not supported on Win 8.1 and he is consequently unable to assist further. Since the program works fine other than for not accepting a valid serial number, I don't see that Win 8.1 is an issue. Any thoughts? Is it helpful to copy any applicable files from the old computer?  

    Having searched for similar issues with other PSE users, it is apparent Adobe does not intend to respond - none of the numerous questions on serial numbers have received a response. I found the answer to my question, but the solution will not help anyone who can't locate their original installation disks.
    There is an apparent difference in the serial numbers that are issued on-line during product downloads and those that are printed on the box / disk sleeve. I managed to dig up the six year old install disk and initiated setup.The first pop up box requests a serial number and I entered my original number. The installation proceed without incident, other than requesting a file update which I obtained from Adobe downloads. The serial number which was rejected when downloading a copy of PSE 7.0 from Adobe works just fine in the identical disk based install.
    And, a note in passing to "Manjo Kumar:" PSE 7.0 runs just fine under Win 8.1. Please stop using the excuse that Win 8.1 is not supported and give users the real answer: "If you download a copy, you need a downloaded serial number. If you originally installed from disk, you need to re-install from disk. A disk based serial number won't work on a download copy."
    Short sighted attempt by Adobe to force users to purchase another copy of previously installed software.

  • Why does downloaded upgrade to Acrobat 9.5.2 Pro Extended under Win XP HE SP3 fail

    Why does downloaded upgrade to Acrobat 9.5.2 under Win XP HE SP3 fail ?

    Also, do you mean the upgrade from AA9 to AA XI? Where did you download the upgrade? The only upgrade available from Adobe is to AA XI.

  • Installation of Oracle 8i under Win XP ( PC DELL  Pentium 4 )

    Hello,
    I try to Install Oracle 8i under Win XP ( PC DELL Pentium 4 ) but the program of installation can not lanch then
    Oracle Universal Installer
    Please help me

    Hi,
    Oracle 8i doest got install on P-IV machines , so u need a patch for P-iv machine , u can download it from oracle 's website and after u can install 8i on P-Iv machine easily ,

  • FFMPEG screencast is not working for WoW under Wine (AMD Catalyst)

    Hi all. I'm trying to record game video using ffmpeg, but each time when I actually switch my focus to the game window, the picture freezes. Here is the example: http://www.youtube.com/watch?v=r4kfKpgcTAE This is World of Warcraft running under wine. I use AMD Catalyst beta-driver from the unofficial repository (mentioned here) on x64 system (lib32-catalyst-utils also installed).
    I tried this:
    ffmpeg -f x11grab -r 30 -i :0.0 -f alsa -i hw:0,0 -acodec flac -vcodec ffvhuff test.mkv (from wiki)
    and some variations I found over the Internet:
    ffmpeg -f x11grab -r 30 -i :0.0 -f alsa -i hw:0,0 -acodec flac -vcodec ffvhuff test.mkv
    None of them worked.
    I guess it's due to driver, because when I tried recordMyDesktop tool a few days ago with xf86-video-ati driver it recorded wideo. But when I switched to proprietary drider, both ffmpeg and recordMyDesktop are not working. I'm not going to change video driver because it's performance in video-games, so I'm wondering if there is any solution to my problem (except windowed-mode!).
    Thanks.
    Last edited by ghostwolf (2013-07-19 05:02:16)

    Hi,
    I had similar problems when trying to record OpenGL games with FFMpeg CLI. I use the catalyst-test drivers for my AMD HD 6870.
    You could try downloading SimpleScreenRecorder via yaourt; get both, including the lib32-simplescreenrecorder.
    There will be some conflicts, but choosing to replace some files hasn't caused any problems.
    Make sure you have both  lib32-libpulse and lib32-alsa-plugins installed (pacman).
    Once everything is in set, open SSR (SimpleScreenRecorder); set audio input to:
    - Record Microphone
    - Backend: PulseAudio
    - Source: Monitor of Built-in Audio Analog Stereo
    I chose to output as MKV ; H.264 ; MP3 @128
    Select Start Recording and fire up WoW. I was able to playback the game-play video (full screen 1920x1080) with audio.
    You may need different settings from what I have, notably the audio, but it should record in full screen mode.
    Good luck !

  • [SOLVED] Steam fails to run under Wine

    Hello,
    Recent Ubuntu -> Arch user here, so go easy on me!
    I run Steam under Wine. Once it logs in, the main and update news windows appear, and so do '$FRIEND is currently playing $GAME' boxes. That's all fine, until Steam completely dies/disappears a second or two later. It looks like it just can't find a load of necessary libraries; I know the files don't exist, but should they? If not, why is Wine looking for them?
    As far as I know, all Wine dependencies (incl. optional) are installed. The Gecko extension too. I searched far and wide and installed whatever lib32 (including lib32-catalyst-utils) packages I could find in relation to Wine problems. The 64-bit Catalyst drivers are installed and working.
    I did follow the wiki and I did search on Google, these forums and the bug tracker, but nothing has worked.
    $ uname -a
    Linux pr0scarch 2.6.36-ARCH #1 SMP PREEMPT Fri Dec 10 20:32:37 CET 2010 x86_64 AMD Phenom(tm) II X6 1055T Processor AuthenticAMD GNU/Linux
    $ wine --version
    wine-1.3.10
    $ cd ".wine/drive_c/Program Files (x86)/Steam"
    $ WINEDEBUG=warn+all wine ./Steam
    Due to a measly scrollback of "only" 5000, I didn't get all of the log, but I think this is 99% of it and that it might contain relevant info: http://www.resiiign.com/~coconut/steam.log
    Any ideas?
    Thank you!
    Last edited by xlatedst (2011-01-06 19:31:39)

    Thanks cebru, that was the problem.
    Now I just need to tweak things so that games work well. CS 1.6 is flawless so far.
    Thank you again!

Maybe you are looking for

  • Creative Cloud Desktop - running but no icon

    The Creative Cloud Desktop application does not appear to be working for me anymore. It worked when I first installed it, and after the next 1 or 2 times I booted my machine, but it hasn't worked since. It appears the application is running (if I dro

  • No functional area derived from GL account and cost center ccombination sel

    Hi, When doing a goods issue for a delivery, am getting this error. Hope somebody could advice. "No functional area derived from GL account and cost center combination selected."

  • How to create users for B2B console in SOA Suite 11g?

    Hi, I have installed SOA Suite 11g and created a new user in weblogic server and assigned groups Deployers, Monitors & Operators. On trying to login(http://hostname:port/b2bconsole) using this new user, im not able to login and the below error is log

  • Excise transction type

    Dear Sir , I have some queries relating to CIN . which transction type is used in which process and what its purposes like GRPO transction type in Excise & refrance documment which needed for doing this , thanks & regards Shailendra

  • Mini constant beachball in numerous apps, yet apps still responsive?

    I have a very strange issue happing with my new mac mini. It has been happening since i bought the computer a few months ago running everything from 10.7.0 to 10.7.2. Here is a video of the issue: http://www.youtube.com/watch?v=FOpOJ6Q8sxM This happe