GTA Vice City won't even start?

So i just downloaded GTA vice city and it took enough to install so when it finished i tried to start it and at the same second it turns on and then off, basiclly won't even start. Has anyone gotten the app already and tried it out? Maybe solution for my problem?

It's possible you simply have a defective battery. Try going down to your local Apple Store and try one of their batteries in your MBP. If it works then simply replace it.

Similar Messages

  • I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its annoying.

    I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its frustruating.

    Hi...
    Apple's policy states that, "all sales are final" >  iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    But since you are not getting any help from the developer, you can use the email form to contact Apple and ask for a refund >  Apple - Support - Mac App Store - Contact Support.
    No guarantees.

  • X6 errors, now it won't even start anymore

    Hei!
    I've had the X6 now for about a month and a half and while I was updating the software something went wrong. It couldn't reinstall the backup.
    Ever since that moment my phone has been doing weird stuff.. The touchscreen sometimes doesn't respond or just fades away and the phone restarts. 
    I get errormessages that the memorycard can't be found (I have the 32gb version) and properties disappear.
    Now the phone won't even start when I have my simcard inserted. It gives the error message 'Selftest failed, contact the reseller'.
    I can't do anything with it, the message disappears when I take out the battery but when I start it up again the same message appears.. 
    Who can help me? It's really urgent! 

    A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
    1.) Turn off the phone and remove battery for 5min
    2.) Reinsert battery
    3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
    4.) While holding the three buttons, press the power key to boot the phone up.
    5.) Keep on pressing until you see the country selection screen.
    A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Download won't even start (Adobe Flashplayer)

    Hello, I am using Macbook Pro - Lion Version 10.8.2. I have tried downloading/uninstalling the previous version and downloading again. But the download for the latest Adobe Flashplayer won't even start. The page just loads but the download does not start. I tried restarting my com and did all that's said in the forum.. But it seem I'm the only one facing this problem. I have made sure that I'm downloading the correct version for it, just FYI. Any one knows how I can solve it? Thanks! 

    Can you check to see if you have "enable plug-ins" checked in Safari's preferences dialog, under the security tab? If not, enable it and check.
    It seems to be a browser specific issue. Try a different browser like chrome or firefox, it should work.
    For fixing Safari, lets follow below suggestions :
    Run the Flash Player Uninstaller as applicable for your machine(i.e.Windows or MAC) and remove flash player.
    For MAC : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
    Restart the machine.
    Download and Re-install Flash Player.
    Restart the browser and check.
    [Moved the discussion to Flash Player Forum]

  • Cannot Download GTA:Vice City

    I am having problems purchasing GTA: Vice City from the MAS.
    Other purcahses are working fine. However, when I open the GTA:VC page in the MAS, no screenshots show up and I cannot interact at all with the price/buy button.
    I am wondering if this has anything to do with the 17+ rating. No parental controls are on.
    Ideas?

    The one thing you don't seem to have done is contact the app's developer, who is the only person who can solve the problem (if anyone can.)

  • GTA Vice City under Wine

    I am trying to play GTA Vice City under Wine with the help of this page: http://appdb.winehq.org/objectManager.p … n&iId=3050 and I've faced a problem. It's regarding input, basically my character always runs forwards and the camera spins all the time. Also, pressing "shift" to run doesn't work. This does not happen when I'm in a vehicle. I've tried to change the key mappings but it still doesn't work. This issue was reported to that AppDB page I gave the URL to, but it involves udev.rules and I couldn't get it working

    The one thing you don't seem to have done is contact the app's developer, who is the only person who can solve the problem (if anyone can.)

  • Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

    Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

    You can only install games that are in the iTunes app store on your computer and the App Store app directly on the iPad - if there are games like those that you mention in your country's store then you can buy and install them. Have you had a look in your country's store ?

  • How do I unlock an iphone 4 when it won't even start up?

    How do I unlock an iphone 4 when it won't even start up?

    http://support.apple.com/kb/TS3281

  • Won't even start

    My MBP which is just over a year old won't even start up now, I press 'Power' then it tries but just switches itself off.
    Recently i started noticing that it was not charging properly as well.
    Since I am out of warranty will it be a long costly procedure to determine the problem?
    Your thoughts please.
    Thanks.

    It's possible you simply have a defective battery. Try going down to your local Apple Store and try one of their batteries in your MBP. If it works then simply replace it.

  • Here Drive won't even start on Lumia 520

    Hello
    Here Drive app is not even starting. It shows me the app logo and then throws me back to menu. Restoring factory settings did not help. 

    http://discussions.nokia.com/t5/HERE-Location-based-services/Nokia-Lumia-620-not-running-here-produc...
    same prob

  • ISync won't even start up

    At first, I used isync to sync my Sony Clie, but then it turns out that Palm Desktop actually works better. Now Palm Desktops will not sync. So I decided to do a backup with Isync and it wont even start, it quits out on me. I try to Reopen, but it stays looping.
    Please help,
    Paul

    There are several issues in play here.
    To begin with, have you applied the Mac OS X 10.4.9 Update? If so, did iSync 2.3 work before you applied the OS update?

  • New Lumia 520 won't even Start!!!!

    Hi All,
    My roommate just received a Nokia Lumia 520 which he ordered online a couple of days ago.
    The thing is, the phone won't even boot up. The Nokia logo appears, stays, disappears for a few seconds and then gets back on again. 
    This has been going on for about 2.5 hours, which seems excessively long. We have tried the reset key-combo (Vol down + Lock), but I don't think there is anything to reset in this phone. My laptop was unable to install the driver for the device, reporting that the device was disconneted in between - my guess is its turning on and off again and again. 
    He called up the Nokia Care Hotline,and they said that the phone may take about 30-40 minutes to boot up the first time, but I think he was over-estimating, considering it took nowhere near as long for my Lumia 510 to boot up the first time. 
    Tough luck for the guy, but do you guys think there is something we can try to do for ourselves or do we have to get a replacement or something?
    Looking forward to your responses on this post,
    Thanks!

    OK... final bit of info for Paul and Rayhipkiss.
    While we are certain that this phone has a firmware defect, the Combo that Ray suggested is using an extra key. The actual key combo for restart the phone is Volume Down + Power.
    In order to reset the phone, which I did try on this particular one, you need to bring it into Reset mode. This is done using the Volume Down key on the rocker. When successful, you see an exclamation mark. Now, you press the following keys in the mentioned sequence:
    Vol Up + Vol Down + Power Key + Vol Down.  
    As the phone resets (Phone purges to Factory settings), two gears appear on the screen, rotating. 
    When done, the phone should have reset itself to normal. Unfortunately for this phone, SN=AFU.

  • AME CS6 won't even start

    I have an issue where AME won't start on a win7 system, it doesn't even show the startup splashscreen.
    It will show up very briefly in the task manager processes and then it just disappears. I have tried the usual remedy (which helped once before with AME 5.5), deleting the AME preferences folder inside the appdata folder, but that doesn't help at all, AME still doesn't start.
    I think this has something to do with the 6.0.3 update, AME did work without a problem before I applied the update. Everything else works
    Any ideas?

    It's possible you simply have a defective battery. Try going down to your local Apple Store and try one of their batteries in your MBP. If it works then simply replace it.

  • Safari won't even start since update to 3.2

    I am having the same problem as lots of others I am reading about here. Since I upgraded to 3.2, Safari won't open at all. Just gives me the message that Safari "unexpectedly quit" before it even opens. I have been reading the posts and have tried deleting all the plugins (although I didn't seem to have the ones that were causing others trouble) I deleted all except bookmark.plist in user/library/safari. I even called Apple. She had me delete Quicktime, clear Cache, clear cookies. Nothing worked. She wants me to Archive & Install. Last time I did that I had a very bad experience (and it turned out it wasn't really necessary, anyway) so I am avoiding that.
    So for now I am just using Firefox and hoping that someone will come up with an answer that will work for me.
    Thanks

    She had me delete Quicktime
    An Apple employee told you that? You should never do that. Quicktime is a fully integrated part of the operating system and should not be deleted.
    Rather than attempt a reinstall of bits and pieces I would also recommend an Archive and Install.
    How to Archive & Install:
    http://docs.info.apple.com/article.html?artnum=107120
    This document explains how to correctly reinstall a prior version of Mac OS X in the event that other troubleshooting does not resolve an issue:
    http://docs.info.apple.com/article.html?artnum=25404
    BUT: Don't install older versions of Mac OS than what comes with your computer:
    http://docs.info.apple.com/article.html?artnum=25497
    Once your operating system is functioning properly again you, and you have installed all security and Quicktime updates relevant to your system, this might help:
    If your Safari keeps crashing, or if you are updating Safari (or just have):
    N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings.
    (If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Safari 3.2 for download can be found here:
    http://www.apple.com/safari/download/
    Make sure you download the correct version for your system.
    Also, observe the standard procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
    Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now both Tiger and Leopard uses Safari 3.2. If Safari 3.2 is not the fastest browser you have ever used, then something is wrong!
    (Trying to revert to a previous version of Safari can have repercussions, as Safari 3.x uses a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back for instructions on the safe way to do so.)
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.2.
    You should also ensure that you have downloaded and installed the correct version for your Mac of Security Updates up to 2008-007, which is required for Safari 3.2. Like all security updates, these require a restart and a permission repair. Note that 2008-007 is a combo update: if you have missed a couple of updates this one will suffice.
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • Hard Disk/Library/InputManagers
    • Home/Library/InputManagers
    especially prior to system updates and updates to Safari (they can always be added back one-by-one later).

  • T61 - Blue screen error message (nv4_disp) - Now computer won't even start!

    Hi I have a Lenovo T61 (Type: 7662-CTO) Windows XP.
    A couple days ago, all of sudden my screen turned in a yellowish hue, started flickering intensely and froze; I had to manually shut it off (by pushing the power button).
    Next day, I started my computer and it worked fine until I had the exact same flickering and freezing issue, but this time, the screen didn't turn in a yellowish hue. Once again, I manually shut it off and went to bed.
    This morning, however, when I started my computer, my screen went totally blank, though I could hear my computer running. I hooked it up to my TV to see if anything comes up and that's when I got this blue screen of error message.
    It says:
     ================================================================================
    Problem has been detected and windows has been shut down to prevent damage to your computer.
    Problem seems to be caused by the following file: nv4_disp
    If this is the first time you’ve seen this stop error screen, restart your computer.
    If this screen appears again, follow these steps:
    The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
    Please check with your hardware device vendor for any driver updates.
    Technical information:
    ** STOP: 0x000000EA (0x8A4803C8, 0x88FFD500, 0xBA4EFCBC, 0x00000001)
    nv4_disp
    beginning dump of physical memory
    physical memory dump complete.
    contact your system administrator or technical support group for further assistance.
    ==================================================================================
    It would show this blue screen very briefly and rebooted by itself (without letting me log in windows), so I had to once again manually shut it off.
    I thought perhaps cleaning a fan might help, so I opened up my laptop, cleaned the fan, keyboard, palm rest etc and assembled it back together.
    When I turned on my computer, now I'm getting NOTHING. Not even a blue screen. Computer would start, but very briefly after (just a few seconds after), it would just shut it off by itself. 
    Someone please tell me what's wrong with my computer and if I can revive it at all.
    Also, would you recommend me to bring it to the local Lenovo repair center (http://bplocator.lenovo.com/)?
    Thanks so much for reading a long message.

    marissa07, welcome to the forum,
    marissa07 wrote:
    ......snip..
     ================================================================================
    The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
    Please check with your hardware device vendor for any driver updates.
    ==================================================================================
    Have you tried updating your graphics driver? 
    Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER"
    You can find the latest driver for your system here. Another option would be to run ThinkVantage System Update, which is hopefully on your system, if not you can find it here.
    I'm not saying this is the solution or ruling out a hardware problem, (which the flickering suggests), but it's a good place to start
    Let us know
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

Maybe you are looking for

  • Stream from iphone to airport

    Hi maybe I'm jusy being dense, but how do I set up streaming from my iphone to airport express? Ive set up apple tv, airport express to play through hifi and apple remote to control it etc - so lal very cool but cant seem to find the instructions for

  • Identify who deleted a petition o an infocube

    Hi gurus. I've been facing a problem has happened before, which have been deleted request from an InfoCube. I would like to detect what user has deleted from it. I know there is a table in SAP BW which is hosted this information, but I've forgotten t

  • Logs for UPSShell.exe

    Hi We are using UPSShell.exe in FDM to shcedule batch. We see batch is successfully executed even if we do not place file in open batch.This error is not even recorded in outbox\logs. Is there any way we can capture these kind of errors Thanks in adv

  • HR -- adding year with date and month

    Hi all, Can any one let me know what is the logic for adding Year with date and month in HR. ex: 01.10.2008   from this date it should be 2 years. thnks joshi.

  • Connecting an N - N Sharepoint Relation

    I'm currently developing a SharePoint site which I need to set up two many to many relationships. List1 n <--> n List2 n <--> n List3 Keys for each list are: CID, RID, and PID. I have an additional two lists which join the lists: ListCID-RID ListPID-