Gtdreport with excel template
Hi,
I found the following product from the Web. Has anyone used it with pre-built excel template? I don't know much about this product. I used PL/XLS before but it didn't support excel template.
http://www.gtdreport.com/
Thanks.
Andy
Oops... I meant to say "I can burst an RTF template to Excel output, but that's different."
Similar Messages
-
Run BI Publisher report (with Excel template) on Windows 7
Hi, All.
Sorry for my English :)
I have some problem:
I use BIP standalone for my reports. Some reports are in Excel (with Excel template). When I run it on PC with WinXP - all is OK. But, when I try to run it on PC with Win7, then Excel is opening and writing this "Native file format and file extension does not mismatch. Before open be sure of file does not damage" (this is my translation). If I try save file on the hard disk, then file is 0 kb. But if a report has RTF-template, then it opening normaly on Win7's PC.
Have you any ideas?
Thanks!option1:
The query should be same @ detail level, only the template has to be different for summary and details.
@runtime, user can choose to see the detail/summary
Disadvantage, if the data is huge,
advantage , only one report.
option2:
create two separate reports summary and details
and create diff data and diff layout and keep it as different report
Advantage, query will perform based on the user run report, summary/detail, so that you can write efficient query.
Dis advantage , two reports query/template to be maintained. -
Labview- .EXE file with excel template
How to create a .exe file from the .vi file with excel template. Since I am giving only .exe file, the client wont be having the excel templates. So please tell me how to build a .exe file with templates which will be invoked by mainfile.vi. Please let me know if U guys know. (Now in my mainfile.vi I am using local file location path to invoke)
Hi saamy,
I have tested it out at my PC and it is working.
I have tested with MS office report and put the template "Excel Template.xlt" under VI's folder (C:\temp) and make the exe file.
After the exe file has been moved to other place(C:\build) and has been executed, the exe file try to locate "Excel Template.xlt" under both C:\temp and C:\build. As long as the template is the same folder with exe file, it is working.
Pls refer to attached file.
Hopefully it will help. Please let me know the result.
Thanks & Regards,
Steve
Attachments:
My Application.zip 4415 KB -
Bursting with Excel Template Format
Greetings!
Does anyone have a working example of a bursting solution with an EXCEL Template Format? The documentation doesn't list Excel as a supported format; my hope is that this is out of date. I'm on version 10.1.3.4.
Thanks,
MacHere's the error message I'm getting when I try to run this report. Perhaps it's something different than I expect:
History ID 584
Status Failed
Start Processing Time 8/13/10 1:58 PM
End Processing Time 8/13/10 1:58 PM
Time Elapsed 2.03 sec
System Message oracle.apps.xdo.servlet.scheduler.ProcessingException: java.sql.SQLException: ORA-01722: invalid number
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2153)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:372)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: java.sql.SQLException: ORA-01722: invalid number
at oracle.apps.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
at oracle.apps.xdo.servlet.data.DataException.fillInStackTrace(DataException.java:127)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at oracle.apps.xdo.servlet.ReportException.<init>(ReportException.java:40)
at oracle.apps.xdo.servlet.data.DataException.<init>(DataException.java:44)
at oracle.apps.xdo.servlet.data.bind.AdvancedQueryBoundValue11.getXML(AdvancedQueryBoundValue11.java:547)
at oracle.apps.xdo.servlet.ReportContextImplV11.getReportXMLData(ReportContextImplV11.java:408)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:225)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:76)
at oracle.apps.xdo.servlet.ReportImpl.renderReportXML(ReportImpl.java:284)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:1915)
... 3 more -
I have uploaded a template created in Excel, and now need to burst this to a group of email addresses.
In the docs, the only values available for TEMPLATE_FORMAT in the control file are:
RTF
PDF
ETEXT
XSL_FO
Yes, I can burst an RTF template and deliver in PDF format, but that is obviously not the same result.
Sorry, I have searched and searched, and can only find this question asked, but not answered:
RichOops... I meant to say "I can burst an RTF template to Excel output, but that's different."
-
Using Excel template in ALV Report
Dear Gurus,
I am having problem with excel template as layout used in ALV report (as i am new to this topic). I uploaded the excel sheet through report BCALV_BDS_UPLOAD. And i am calling the excel template with change layout option but it is not updated with report output data.
Please suggest,
PRAVEEN LOBO
<personal contact details removed by moderator>
Edited by: Thomas Zloch on Dec 21, 2010 2:50 PMDid you try reading sap help files which clearly explains about Managing templates, selecting templates, creating templates, deleting templates.
[Managing Templates in ALV|http://help.sap.com/saphelp_apo/helpdata/en/d4/a2a138198daa2fe10000009b38f842/content.htm]
This will provide you a clear picturesque on handling templates in ALV.
Edited by: K.Manas on Dec 22, 2010 9:13 AM -
Excel Template with Multiple Sheets
Hi everyone,
I need to build Excel template with multiple sheets where each sheet should have at-least one chart.
Thanks
AravindHi
Could you please explain those ways here.?
Many Thanks,
BK -
My question is related to the Sales Data.xlsx template that comes with Excel 2013
IN this workbook is a sheet named Sales Data. It has, 3 shapes. One each for each of the tab sheets in the workbook. When I click on the 'Sales Report' shape it selects the sales report tab. When you do this the shape changes color and the 'Sales Data' shape
also changes color.
However I'm unable to figure out how the colors are changing.
I don't see any macros in the workbook/worksheet. Nor do I see any code for worksheet events. I don't see any modules in VBA either. I think what is happening is that there are 2 shapes. When you click on one, the one shape goes to the background and the
other one comes to the foreground.
I'm no sure how it's doing that.
Can someone look at this template, Sales Data.xlsx that comes with Excel and explain how this functionality works?
Thank You
Keith Aul
Keith AulThe shapes are exactly as I suspected, each of 3 sheets has 3 'navigation' shapes. The shape with the same name as the sheet has no hyperlink and is coloured differently to indicate it refers to the active sheet. The other two have hyperlinks linked to respective
sheets. 3x3 shapes, 9 in total, none of them ever change colour!
It's logical though not necessary to name each shape same as the sheet it links to, but they'd work just as well with their original default names.
For aesthetics, the shapes that refer to own sheet have a horizontal line on top, actually two shapes as a group.
If still confused copy each set of 3 shapes to a 4th sheet, or open two new windows so you can see all three sheets at the same time. -
There was a problem sending a command to this program. Excel with new templates.
I have recently deployed these UEV templates for Office 2013. In particular, I'm having an issue with Excel 2013. Whenever I let UEV sync settings for this application and I click on a .xlsx file, I get the infamous "There was a problem sending
a command to this program..." error message. This drove me nuts for a week thinking there was something wrong with Excel. I finally figured out it was the Excel UEV settings causing the issue. I've tried deleing the settings package file,
but no luck. I can reproduce the issue pretty easily.MS has released hotfix for this issue. http://support.microsoft.com/kb/2927019/.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr -
Excel Template - Save with Unique Names
Hi - I have a SharePoint 2010 document library with an Excel template as the template. When a user creates a New Document (new Excel workbook from template), the name of the new file is "PSR1". Someone else may have also created a
new workbook, where the default name is PSR1. How can you get Excel to name the file uniquely with each template? I've set up fields to capture user name and date/hours/mins/sec and have it concatenated ina field for use as the name, but I can't
get Excel to use it or figure out how to make SharePoint require unique file names. Thank you.OOTB way there isn't any option to allow users to provide a specific file name, either you can set content approval for that document library or set an announcement / header asking users to only save file with that specific name series.
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
Creating multiple page report with single page excel template
Hi,
I have a created a single sheet excel template. When my LabVIEW program runs, I want to insert a data table in the excel report for each time the loop runs. Each time I add a new sheet in the report and add the data table. I want to get the same template in each new sheet. Please let me know how to insert the same template in each new sheet in the same file. Right now I need to create template file with 5-6 worksheets each with the same format.
RashmiThanks for your reply.
I tried to do the same you have suggested. As the "Save As" option does not work, I tried to copy the block diagram into a new vi but it gives the error. I am attaching here the screen shot of the same.
Attachments:
copy_error.png 208 KB -
In an Excel template file, can I set the Folder Path in the SaveAs Dialog box?
I have an Excel template file (xltm) and, with help from the forum, I now have a Workbook_BeforeSave subroutine to save the template as a macro enabled file (xlsm). I’m so thankful for that help from Edward in the forum.
I also want to set the default folder location to save the file. I really only need it when the template is saved as a new xlsm file, because if they open the xlsm file, it’s usually opened from the default folder path so any save would normally go back
to where the file was opened. However, with a template (even if the template is in the default folder) the Saved template reverts back to the user’s documents folder.
Is there a good way to do this?
I tried to modify the Workbook_BeforeSave code like this:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim FolderDir As String
Dim FileNameVal As String
FolderDir = "Z:\save\data\place\"
If SaveAsUI Then
If Dir(WorkBookFolder, vbDirectory) <> "" Then
Application.DefaultFilePath = WorkBookFolder
End If
FileNameVal = Application.GetSaveAsFilename(, "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
Cancel = True
If FileNameVal = "False" Then 'User pressed cancel
Exit Sub
End If
ThisWorkbook.SaveAs Filename:=FileNameVal & ".xlsm", FileFormat:=xlOpenXMLWorkbookMacroEnabled
Application.EnableEvents = True
End If
End Sub
But there are a lot of checks that would need to be done.
I'm not sure how to only default the folder saved only when they open the template, but not change it when they just open an already saved Excel file created by the template (with all the active content, macros, etc.).
Alan EdwardsHi Alan,
store the path\filename in the 1st argument:
FileNameVal = Application.GetSaveAsFilename("C:\*.xlsm", "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
Andreas. -
How to show custom error message in WebADI Excel template?
Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
NarasimhaThe custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
PROCEDURE upload_data (
P_CONTAINER_ID IN VARCHAR2
, P_SAIL_DATE IN DATE
, P_PO_NO IN VARCHAR2
) IS
--declare
lv_err_msg VARCHAR2(240);
lf_err_flag NUMBER := 0;
ln_temp NUMBER;
BEGIN
--------------------- checking for mandatory parameters---------------------------
IF (P_CONTAINER_ID IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
END IF;
-------------Validation for Sail Date Format----------------------
IF (P_SAIL_DATE IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
ELSE
BEGIN
SELECT 1
INTO ln_temp
FROM DUAL
WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
EXCEPTION
WHEN NO_DATA_FOUND THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
WHEN OTHERS THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
END;
END IF;
-------------Validation for PO_Number----------------------
IF (P_PO_NO IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
ELSE
BEGIN
SELECT count(1)
INTO ln_temp
FROM PO_HEADERS
WHERE Attribute4 = P_PO_NO;
EXCEPTION
WHEN NO_DATA_FOUND THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
WHEN OTHERS THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
END;
END IF;
-----------------------Insert Record----------------------------
IF lv_err_msg is NULL THEN
BEGIN
INSERT
INTO XXP2P_HW_COST_FACTORS_STG
CONTAINER_ID
,SAIL_DATE
,PO_NO
, ERROR_FLAG
, ERROR_MSG
,CREATED_BY
,CREATION_DATE
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,LAST_UPDATE_LOGIN
VALUES
P_CONTAINER_ID
,P_SAIL_DATE
,P_PO_NO
,lf_err_flag
,lv_err_msg
,FND_GLOBAL.USER_ID
, trunc (sysdate)
,FND_GLOBAL.USER_ID
, trunc (sysdate)
,FND_GLOBAL.LOGIN_ID
-- commit;
DBMS_OUTPUT.put_line
'-' || 'After ap_invoices_interface'
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
raise_application_error(-20001, lv_err_msg);
END;
ELSE
raise_application_error(-20001, lv_err_msg);
END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG; -
Can we use Trunc,Substr in Excel templates
Hi All,
I have a date xml tag with value like "2012/04/01 00:00:00" i need to show this in excel output as "01-APR-2012".
I am using Excel template, need your help to achieve the same.
I tired to use Trunc,Substr,Format date but nothing is working.
Please give me your valuable inputs to solve this issue.
Thanks
RajehsVarma,
Thanks for the reply, i have already checked the link but it doesn't have syntax to use Trunc,substr etc. functions.
Also date in example is - "1996-02-03T00:00:00.000-07:00" , but in my case date format is different "2012/01/01 00:00:00".
Thanks
Rajesh -
Report Generation Toolkit with Excel 2003 and Excel 2000
Hello,
I'm using the Report Generation Toolkit to generate an Excel report from an Excel template.
The "NI_Excel.lvclass" is included in the "source" section of the application builder options.
I create an exe file on a PC where Excel 2003 is installed. On a Notebook, where only Excel 2000 is installed, the application crashes at the generation of the report:
I guess the problem is the different version of Excel but I don't know. On the developer PC with Excel 2003 it works fine.
In this document it's only talked about different Word versions.
How can I use the Report Generation Toolkit here?
I'm using it that way:
RegardsOh, it seems that the Report Generation Toolkit "only" supports Excel XP/2003/2007.
I think, that's the problem.
Maybe you are looking for
-
I have a cart of iPads in my high school. Each iPad is shared by several students in different classes throughout the day. A clever student in one class decided to lock one of them. We have already unlocked it by restoring it, etc., but I'd like to p
-
Automatically Generate a PDF File and a Paper Copy
Is it possible to generate a PDF file automatically when a report is printed to paper? I don't want the users to print to paper in one process then have to print a second time to a PDF file because that step will be forgotten.
-
How to profile a pre-deployed J2EE app. using JSE8?
I would like to profile a J2EE application that is already deployed on Sun Appserver. I do not have the source structure with me to start the profiling directly from the tool by the usual documented steps of JSE8. In JSE7, once I enabled the profiler
-
Home Page setting option is not working after saving a new or different home page on Firefox 19.0. When opening a new page (not tab) it always reverts back to the default "Modzilla Firefox Start Page" no matter what.
-
Hi everyone, I had a little trouble finding this on ony forums, so i decided to write it myself. I have setup on my Windows server 2008 machine fax server manager. It is working well (recieving faxes and forwarding it through email) It has been setup