GTS BP with two adress numbers.

Hi All,
I am facing with an issue that a BP is assinged with two address numbers. Ideally it should be one with our case .
It was tranfered from ECC and for a ECC customer master only one adreess number can be exist.
The 2nd adress was changed from ECC but unfortunatly instead of updating the existing one , it created one more adress line in GTS .
When I checked in BUT020 table for this BP two adresses are assigned and no external adress for either of both add. numbers.
I tried with other sample customer masters but neither able to re-create nor the cause of the issue.
Kindly help by suggesting any check points , settings..Let me know if any other information is needed.
Thanks ,
Raj KB .

Hi Raj,
I have seen a similar issue before but on a larger scale.
The previous incident was caused by a number range overflow that was not solved in the correct manner.
Instead of correcting the problem in GTS first, the master data was re-transferred again from ECC in an attempt to overwrite the incorrect data.
But because the number range was not corrected in GTS first the re-transfer created a lot of inconsistent entries in the BUT020 and ADRC tables.
The attempted solution caused an incorrect relationship between ADRC and BUT020 for the (over 350k) BPs involved.
This may not be the case in your scenario but it's the only root cause I can think of without having access to you system.
Please inquire about the number ranges if the above sounds familiar.
Going forward you should run program /SAPSLL/BP_ADDR_CLEANUP from SE38 in simulation mode to see what gets picked up.
Best Regards,
Eoin

Similar Messages

Is it possible to use a single iPhone with two contact numbers via dual sim or an app?

Is it possible to use a single iPhone with two contact numbers via dual sim or an app?
This would be a useful feature for personal and company numbers but using one mobile, rather than carrying two devices or diverting calls.

Then go ahead and try it. You'll find it's probably a load of crap.
You want 2 numbers, then use Google Voice or TalkaTone
Those are US based only Apps or numbers so no good. I won't be wasting money by just trying something either, especially because using a dual sim would mean purchasing another sim card on either pay as you go or monthly contact.

Using imessage with two mobile numbers on one iphone?

hi is it possible to use two mobile numbers on imessage , with only one iphone?
i have an old phone , and an iphone, but would like to be able to use receive imessages on the iphone , using the two numbers, is this possible?
thanks

no

Facetime with two mobile numbers?

Hi,
I have used Facetime (and iMessage) in the past with my German mobile number. Right now I am travelling, and I have bought a local SIM-card. My German number ist still active and calls are being forwarded to my "vacation"-number.
I can make outgoing calls with Facetime as usual, but I am told that it shows my US-number (which I don't want, as it is only temporary). Moreover, I cannot be reached via my German cell phone number. Possibly, because in the logic of Facetime/Apple-ID, it has been replaced by the "new" US-cell-number associated with the phone itself as of now.
Is there any way I can make Facetime recognize either only my (old) German mobile number, or both mobile numbers? Or can Facetime work only with the active number from the SIM-card in the phone at any given moment?
Basically, I can tell Facetime/Apple-ID to use so many Emails, can I do the same with cell-phone-numbers?
Thanks so much, Ulrich

no

Does it matter if you are sharing one email account with two phone numbers

I am trying to facetime with my wife. We share the same email. but have two different phone numbers. on her end it says she is unavailable for facetime. Any help would be great. Thanks.

The 'extension' cords are all compatible with all of the power bricks for Apple portables (PowerBooks, MacBooks, MacBook Pros, etc.). I also have several from many generations (back to early PowerBooks) and I use them all interchangeably with current adapters (in various rooms at home, at work, etc.).
(As a side note, they are not compatible with the iPod power bricks, but that's not relevant for you.)

One account with two skype numbers, want to forwar...

that's it. i have one skype account that had one skype number forwarding to one land number. works fine. bought another skype number in order to forward to a 2nd land number. but cant find any way to do this on skype. skype just wants all forwarding for both skype number to go to the same land number (or numbers).
other than creating a 2nd account for the second number/forwarding, is there a way to do what i want to do here?
or, if i need to set up a 2nd account for the 2nd number, is there any way to get skype to apply the 2nd skype number and the payment (that has already been processed) for that number to the 2nd account?
pls let me know, thanks for help.

the Skype client cannot distinguish between incoming calls that were placed to each Skype Number
Skype Numbers are for incoming calls only, and that's all the Skype client sees . . . an incoming call
unfortunately, you also cannot transfer a Skype Number from one account to another
sorry that's not what you wanted to hear
Regards,
Neil

My Nokia Lumia 800 has two IMEI numbers. What?!

Hi Everyone,
Purchased a Lumia 800 (white) from Nokia Store here in Bangalore, India on August 2012. The phone was working fine till August 2013 when camera stopped working. Took the phone to Nokia Care. Warranty checked out fine and the camera module had to be replaced. Got call from Nokia Care three weeks later saying there has been IMEI mismatch as such warranty is now void. Reason- the phone has two IMEI numbers. What??
And funny, Nokia's story was true. IMEI number written on the phone panel and phone box differed from internal hardware IMEI number (which can also be seen from Settings>About). They say this can only happen if the phone was serviced earlier and component changed. Well, this was my first time servicing the phone and when the phone is under warranty why will I give for servicing to a non-nokia centre?? This shocked me, I could not convince Nokia people so I just agreed to pay for the repair. Now, after 3 days, they call up and say- "Changed the camera module but it is still not working. Maybe your motherboard is damaged! you will be charged 80% of the phones price if you agree with repair". I am yet to give them the 'go ahead'.
For no fault of mine I am going through so much!! Is it possible that Nokia sold me a device with two IMEI numbers?? Can anyone please tell me what to do?? Thanks.

Nokia wouldn't have sold a device in that state. It's highly likely that the retailer is to blame for this one. They've probably sold you a refurbished or repaired set as new.
If I was you I would go and speak to the retailer about this.

I have one itunes account with two phones. when i phone one of the numbers both phones have started to ring, only when connected to wifi at home. How do i resolve this please?

I have one itunes account with two phones assigned to it, sons and daughters, (5s). When i phone one of the numbers both phones have started to ring, only when connected to wifi at home. The problem does not occur when not connected to wifi. How do i resolve this please? texting is fine it is only when ringing one of the numbers.

<http://support.apple.com/kb/HT6337>
"To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls."

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring.

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.

Hi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps!

Working with two or more tables in Numbers

Working with two or more tables in Numbers
It is possible to write numbers or names in Table 1 B-2, B-3, B-4, B-5, B-6 etc. and automatically copy in Table 2 only B-2, B-4, B-9, B23 etc.
What do I need to do???
Thanks for the help

The table on the left is named "Source" and on the right "Destination":
In the table "Destination" on the right:
B2=Source :: B2
select B2 and fill down

Can my iphone operate with two different phone numbers?

can I insert an additional sim card in my iphone so that it operates like a phone with two different selectable lines?
in other words I carry one phone with me but can receive or send phone calls, texts, emails etc from either of two different phone numbers?

No

Numbers Charts: Stacked bar chart with two sets of data

Hi....newbie with first post
I'm trying to create a stacked bar chart with two lots of comparative data.
So, there is Basic + Overtime for April 2010 as one stack (ie the basic is one colour, stacked on top is the overtime in a different colour)
Basic + Overtime for April 2011 next to it.
I can get April figures next to one another as four separate columns (2 x basic, 2 x overtime), or I can get all four figures in a single stack, but I can't to two columns (one for each year) of basic and overtime.
Any ideas?

UK,
What you are trying to do will require that you interleave the two sets of two-series data into one longer two-set series, and then plot just the one pair of series. Clear as mud?
What I'm saying is that you have to fake out the program into thinking that you have just two sets, not four.
You will have one series that has, for instance Apr 2010 Basic, Apr 2011 Basic, May, 2010 Basic, May 2011 Basic, etc.. This other series in that chart will have Apr 2010 Overtime, Apr 2011 Overtime, May 2010 Overtime, May 2011 Overtime, etc.
The bad thing here (I'll anticipate your first complaint) is that 2010 and 2011 data will have the same color for Basic and another color will be assigned for both 2010 Overtime and 2011 Overtime.
To get separate color sets for 2010 and 2011 data pairs, you will have to create two charts and overlay them. Both charts would be built in the alternating year format described above, but in one chart all the 2010 data would be blank and in the other chart all the 2011 data would be blank, leaving spaces in the chart for the data from the other chart to nest in.
Jerry

IMessage trouble with two iPhones and one Apple ID

Hi,
I'm having trouble with iMessage after updating both of my iPhones to iOS 6 and not being able to use iMessage with one of the phones.
Some background:
-I have two iPhones, one on AT&T in the U.S., and one on NTT DoCoMo in Japan, both with separate phone numbers, using the same Apple ID.
-The AT&T iPhone is a 4, the NTT is an unlocked 4S.
On my 4 (AT&T), on iMessage, I have the option to send/receive as my U.S. phone number and my Apple ID. Works just like before updating.
On my 4S (NTT), on iMessage, before I updated, I was able to send/receive using my Japanese number and Apple ID. After updating, I have the option to send/receive using my U.S. number and Apple ID. My Japanese number is greyed out and I cannot select it. When I turn on iMessage, it says "Waiting for activation..." and does not do anything. Turning iMessage off and on, some times I get an error message staying that activation cannot be completed.
I have rebooted the phone multiple times, turned on/off iMessage and FaceTime, turned the Set Date & Time Automatically option on/off, and reset Network settings several times. Nothing works; iMessage will not activate on my NTT 4S. Please help!

Finally resolved this issue after months of off and on troubleshooting.
I have no idea exactly which steps "fixed" the issue, but here's what I did. None of the basic troubleshooting steps that are on here worked for me, and this is including restoring both phones in iTunes as a "last resort" step that two Apple technical service representatives suggested.
I found a post on here from user "tungddao" who suggested:
"Turn on iMessage then make a phone call to : 011+445773142076
With Facetime & Siri: 011+447786205094"
I called both numbers with my NTT 4S, and both numbers hung up right away. I also texted both numbers, and the FaceTime one went through, while the iMessage number did not. I then checked my SMS blocking settings with NTT. There were no blocks, but I reset the settings to "unblock all" anyway.
I was able to activate iMessage and FaceTime with my Apple ID and my NTT phone number. Halfway there.
I then turned on my ATT 4, and while I could send/receive using my Apple ID and NTT phone number, the ATT number was greyed out, which was the opposite of what had happened before, when I could use the ATT number, but not the NTT one. On my NTT 4S, I could select my ATT number, but it was stuck on "verifying" for days, and I knew it wouldn't go through.
So, I signed out of my Apple ID on iMessage and FaceTime on my ATT 4, and turned both services off. I turned on data roaming, and turned off WiFi. *This step was key to activating both services, as they would not activate over WiFi for some reason.
I turned on iMessage and FaceTime without signing in to my Apple ID just yet. They both activated successfully, and then I signed into my Apple ID on both services, and from then on, I can use both numbers and my Apple ID on both phones! Finally!
These are my current options:
Phone 1 (4S on NTT): Phone 1's #, Phone 2's #, Apple ID
Phone 2 (4 on ATT, roaming here in Japan on Softbank): Phone 2's #, Phone 1's #, Apple ID
Hope this helps someone out there, as this issue was real frustrating for me.

My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my com

My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my computer and load them in my LR. The photos appear but witthout any editing or tagging. We need to be able to have her working on the photos on her computer with her copy of LR and me on my computer with my version of LR being able to access what is already tagged and given back to me. This seems hard. We need advice on if it is at all possible to have two computers simultaneously working on LR . I bought her her own version because I was told at the time of purchasing that that was the only way to share. Please advise urgently! Thanks.

Sounds like your assistant isn't instructing Lightroom to write the tagging and editing to the files themselves, so wehn the files return to you, they don't have editing and tagging information. She need to select the photos in Lightroom and then Ctrl-S (Cmd-S on Mac). Or alternatively turn on the option to autmoatically write this information to the files.
If you are using RAW photos, then this information will be written to a sidecar XMP file, and your assistant must provide you with the sidecar file. If these photos are not RAW photos, then the information is written directly into the photo file itself.
Lightroom wasn't designed to be a multi-user program, and so it is truly not possible to have two people working on the same catalog at once. The way you are doing things, as modified above, is probably the way to go.
As an alternative, you can transfer (portions of) catalogs as well as photos back and forth and then all of these issues disappear, but a catalog might be rather large for a flash drive (or maybe not, it depends)

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

Hi Libby,
Select all three columns of data. All three must be 'regular' columns, not Header columns, and the X values must be in the leftmost column.
Click the Charts button and choose the Scatter chart.
The resulting chart will initially show only the first and second columns of data, and the selection will have been reduced to show this.
Click the gear icon at the top left of the selection and choose Share X Values.
You should see a result similar to this:
Notes:
The values on my sample table contain a random element, so they have changed from thhe first image to the second.
The chart is as created by Numbers, with two edits:
Data points have been connected with curves, using the Chart nspector.
The curves were selected and their stroke increased to 2pts, using the stroke formating button in the format bar.
Regards,
Barry

GTS BP with two adress numbers.

Similar Messages

Maybe you are looking for