GTS Export Declaration document Error

Hi,
We have an error message while export declarion is procesed - Error message - "authorised value is 9".
For more Info - the document was in monitoring but the wrong message type has been reprocessed : M7100 was reprocessed instead of P770.
How can this document be send back to the monitoring tab ?
Please advice with your thoughts for resolution.
Thanks
Vinod

Hi, Its not really clear what caused the error...
Did you get an inbound message (I***) with the error message ( Authorized value 9 ) after sending the M class message ?
Or was it GTS internal error ? My tip is that you used some value for a field which is not valid in the current code list - maybe check if code lists haven`t changed....
Anyway, to reprocess message there is a small button on the Communications tab (Declaration header level).

Similar Messages

OAF personalization: Could not export any Document Error

Hello,
I am trying to export my personalization from test to prod but i get the below errors when i export the files from test
After i select the files and click the "Export to File System" button i get the below error...
Documents Exported.
Could not export any Document.
Error while exporting following files:
/oracle/apps/irc/candidateSearch/webui/customizations/site/0/CmAplSrchQueryRN
/oracle/apps/irc/candidateSearch/webui/customizations/site/0/CmCandSrchCritDumRN
/oracle/apps/irc/candidateSearch/webui/customizations/function/IRC_CM_APL_SEARCH_PAGE/CmAplSrchQueryRN
/oracle/apps/irc/candidateSearch/webui/customizations/function/IRC_CM_PERSON_SEARCH/CmPersonSrchQueryRN
/oracle/apps/irc/candidateSearch/webui/customizations/site/0/CmPersonSrchQueryRN
/oracle/apps/irc/candidateSearch/webui/customizations/function/IRC_CM_CANDIDATE_SEARCH/CmCandSrchCritDumRN
any ideas why ??
thanks

Hi Kali!
I am having the same issue but have confirmed that the profile value for FND: Personalization Document Root Path is the same in both TST and PROD enviroments.
Still getting the error "Could not export any Document"
I've done a successful export/import from DEV into TST using the same root path.
Any ideas?

Customs Documents for Export Declaration - Output

Hi ,
i have created Billing document in R3, in GTS customs docuement generated for that billing doc.
when i am Executing the message under Communication View giving error message "Cannot execute; message P0350 is incomplete"
Could you please let me know which config i missed out.
and also when i am check the message message throwing as "Executor/sender has not been maintained in customs document xxxxxxxxx" please let me know where i need to maintain the Sender"
I want to see print preview on sereen for Certificate of Origin (US) for customs document for export declaration.
please guide me on this.
Regards
Tarun

Hi,
You can first identify the incomplete schema assigned to the message (P0350).
SPRO -> Global Trade Services -> SAP Customs Management -> General Settings -> Communication Processes -> Define Messages for Communications.
Once you have find the incomplete schema, review the configurations to find which field is missing. From the error message, it might be the processor for the customs document.
SPRO -> Global Trade Services -> SAP Customs Management -> General Settings -> Document Structure -> Control incompleteness checks in Customs Shipments and Customs Declarations
Wen

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

Custom Export Declaration Form in GTS

Hi,
Good day!
I would to ask for your assistance with regard to the Print Program of standard Smartforms in GTS.
Currently, I need to replace the standard Export Declaration Form with a custom form. I found in SPRO that the current standard form is /SAPSLL/SF_CH_802AZV. However, I can't find the the Print Program for this form.
Can anyone help me with this? Anyone knows how to find the standard Print Program for the standard Export Declaration Form --- /SAPSLL/SF_CH_802AZV --- in GTS?
Thank you very much!
Best regards.
Brando

Hi, Its not really clear what caused the error...
Did you get an inbound message (I***) with the error message ( Authorized value 9 ) after sending the M class message ?
Or was it GTS internal error ? My tip is that you used some value for a field which is not valid in the current code list - maybe check if code lists haven`t changed....
Anyway, to reprocess message there is a small button on the Communications tab (Declaration header level).

'Unknown Error' while exporting a document as '.DOC'

I'm using Pages '09 on a Mac Mini running OS-X Lion. I have a 66-page document, originally a .DOC file which I modified and am trying to convert back to a .DOC file. When I try to convert it I get a warning dialog which says: 'An Unknown Error Occurred'.
I searched these pages and found that a number of people reported this and managed to fix it by solving some sort of problem with fonts, but I could not understand what people said they did to fix it. So I made a duplicate of my document, removed the last 30 pages, tried to export, got the error. Removed the last 15 pages, etc. until I found the page which was causing the problem.
Doing this I found two problem pages. The first one had a style called 'Body Bullets' which was using Helvetica 10 point. I changed it to Arial 10 point, but it did not solve the problem. So I deleted the style and used a built-in style called 'Bullet' which I redefined to use Arial 11 point. That worked.
The next problem page had a small section in Arial 10-point. I changed it to use 'Body' style (which I had defined earlier to use Arial 11-point) and now the whole document can be successfully converted to .DOC without errors.
My question is can this be fixed or do I have to avoid using Helvetica/Arial 10-point fonts in my document?
Thanks.
Martin Barker.

Hi
Here I have no problem with these fonts :
For Doing this I found two problem pages I used Helvetica 10.
For The next problem page had I used Arial 10.
I was able to export without any kind of problem.
It would be a good idea to scan your fonts with FontBook.
Some may be corrupted or some may be conflicting.
Yvan KOENIG (VALLAURIS, France) mercredi 18 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Why pages sometimes tells me : "an unknown error occurred" when trying to export a document into .docx or .pdf ?

Hello !
Since I've done the 5.0 update for Pages (and also with 5.1 and 5.2), I sometimes don't manage to export my documents into .docx or .pdf files. I get a message telling: "an unknown error occured", and the file isn't converted. Could someone help me ?

Other than using the version that works, as VikingOS suggests, look for any distinguishing features or objects that may be common amongst the files that won't convert. Particularly Tables which seem to experience the most problems.
We have had a number of reports of this by other users and not been able to finger exactly what is the cause.
Pages 5.2 has quite a few problems with exporting and this is just another.
Peter

Credit Memo to Export Declaration

Hi,
For returns we use the billing document type of a credit memo, this is posing us a challenge when it's an export return becuase GTS programmed in filter logic that credit billing doc types will not get passed to compliance/customs management.
Specific doc types being filtered are O – Credit Memo, 4 – Credit memo list, 6 – Intercompany credit memo, S – Credit memo Cancelation.
Anyone have expereice/guidance on how to integrate? 2 current options being evaluated are enhancing the logic to allow a credit memeo to create an export declaration or introducing the pro-forma.
Thanks, Jeff

Hi Jeff,
Please explain why it would make sense to create an Export Declaration for a return - thanks.
Regards,
Dave

Customs export declaration not getting created

Hello everyone .. i need help of your expertise
I am creating billing document on R/3 and we have made it such that the F2 document flows onto GTS and creates a Customs export declaration
The issue here is i have created the billing docs but i cannot find them on GTS.
I checked the value of the goods is not equal to zero
Checked the SM58 to see of any RFC log is there at the time of document creation and time .
checked SLg1 on GTS to see if any log , but no log is there .
It is basically an export order from EU country to a non EU country
and i checked the billing doc and it is export relevant
The document is flagged to go into GTS in document control settings on R/3
Plant , company code and everything is mapped.
It is an intercompany customer transaction.
When i try to pull up the CULOEX by using the reference doc # from feeder system its saying no documents found
in test environment the billing doc is flowing onto GTS and creating CULOEX succesfully.
The sales order and delivery docs basically passed the compliance test and they are good.
Can someone suggest me where else i need to go and look at .
your help is very much appreciated.
thanks
Bharad

Hi Bharad,
Could you let us know the current status of the issue? If it is resolved could you pls share us how you have done it as it is the most occurring issue and leaves no clue too? If not resolved, Could you check whether the Badi /SAPSLL/IF_EX_CTRL_SD0C_R3 is activated in R/3 or not?
Regards,
Shiva

Intrastat - export declaration

HI,
I have one intrastat business scenario: This process involves b/w three countries:
Step1: Germany sales org. (G100)(Comany code for germany: GA00)create orders from Austria customer.
Step2: Delivery is made from plant 9000(France Plant) (Company code for france: FA00) directly to customers.
Step3: Germany com.code is making a direct billing to Austrian customers
Step4: Therefore there is an intercompany bIiling doc. IV from france com.code to German com.code.
I have done aboove all steps, after i have done the export declaration with germany company code with country declaration DE. In this case system showing doc. in ENGR t.code.
As per client requirement system should not show this document with these combinations.
But client actually requirement is, they want to do the export declaration with france(FA00) com.code with country declaration DE for IV doc. with destination country AT by t-code ENGR
But when i do the declaration with this combination system showing error message: Your selection is based on org.units that are not in the declaration country DE.
Is there any special configuration settings for this in intrastat for traingular business scenario.
This scenario is applicable for spain also.

thanks to all

New export declaration after cancellation

Hello,
I've got the following problem and hopefully someone is possible to find a solution to the problem:
An export declaration is build by an F2. Afterwards the declaration is cancelled on GTS side manually. The actual status in CUHD field PROST is 4B (cancelled). On refer to the same delivery a new F8 is build to create a new declaration but failed. It cannot be transfered to GTS (SM58 process is allready existing with... ). The previous declaration is successfully cancelled, what might be the problem? Is there any idea?
Thanks in advance for any help!
Astrid

Hi Astrid,
I took a look at the code... The check works something like this:
The system tries to find any existing Customs Documents having the Billing Document as a header reference.
If any documents are found, they are checked for Status. Any with status '4B' ("cancelled") are ignored.
If any documents remain, the item-level references are considered. If there are any matches, then the new transfer is rejected. Otherwise, the transfer is allowed.
I wonder; was the Export Declaration the only document created from the first transfer, or did the system perhaps also create a Transit Shipment? If so, that too must be cancelled to allow the new transfer.
Does that help?
Regards,
Dave

Manual export declaration

Hi,
Wondering if its possible to create a complete manual declaration out of GTS without any reference document created in SAP.
Like entering tarriff code,material numbers and all neccessary details manually within GTS and create an IDOC from there?
regards
sabby

Hi Sabby,
Currently it is not possible to manually create an export declaration which will also have the "Control" tab available since that information is populated from the Customs Document in the Compliance module.
However, it is still possible to do what you want. In the feeder system, you need only create an "LO" delivery type (delivery without reference to sales order). Configure that delivery type in the GTS plug-in to send transaction and data into GTS to create a customs document. This also means that materials will need to be maintained in the feeder system. Use the "NLAG" material type (non-revenue).
This method also helps to make the record-keeping compliant with US export laws.
I realize this is several months after you originally asked the question so I hope this response helps someone.
Cheers !
-Greg

Export Declaration Output not determined

Hi,
I have setup the action profiles, action definitions and process for the ACE for manual SED (paper based) output.
Proforma Invoice(F8) get passsed to GTS but no output determined in the communication Tab. I have setip the printer determination for messge type(P0360 - Message Type)
When I go to Change mode and see the log i see the following information.
Don't know what I have missed in the config.
please advice
Legal regulation ACE, document type CULOEX, process CUSEX
Default data Messages: procedure COEUS (Messages - Export - U.S.)
Process: CUSEX; activity sequence: CUSEX; activity: CUSEX
Active Rule with target field $MESSAGE (Message)
      Access with field combination FC_0001 (Default (always proposed))
          -> Document header
             -> No default value was determined
      Access with field combination FC_0019 (Fallback Procedure)
          -> Document header
             -> Source field H_EMCAS (Document Is in Fallback Procedure) has the value:
             -> No default value was determined
      Access with field combination FC_0020 (Activity Sequence/Fallback Procedure)
        -> Document header
             -> Source field H_PROCS (Process Template) has the value: CUSUS
             -> Source field H_PROSS (Process) has the value: CUSEX
             -> Source field H_EMCAS (Document Is in Fallback Procedure) has the value:
             -> Source field H_PROAF (Activity Sequence) has the value: CUSEX
             -> No default value was determined
Edited by: Sandeep Vibhute on Nov 25, 2008 5:21 AM

Hi Sascha,
I had already mainatained the details as follows -
Message         P0360 Shipper's Export Declaration (US)
Legal Reg.      ACE    US Automated Customs Environment (ACE)
Document Type   CULOEX Customs Declaration: Export
Departure Group
Dest.Group
Country of Dep. US   USA
Can you provide any more insights.
Thank you,
Sandeep

Error in PDF export / 'crdb_p2sifmx.dll Error

Hello Network,
i got a problem while i try to export a document to pdf.
Nearly all documents are okay, but one type doesn't work. I get an error that the DLL crdb_p2sifmx.dll' doesn't able to load.
How can i fix this problem.
I have VS2008 with Reports in CR 8.5. I open them, set the selection formular and export it to pdf.
Thanx for ideas.
Hendrik
CrystalDecisions.CrystalReports.Engine.DataSourceException: Fehler beim Laden der Datenbankinformationen.
Details: Die Datenbank-DLL 'crdb_p2sifmx.dll' konnte nicht geladen werden.
Fehler beim Laden der Datenbankinformationen ---> System.Runtime.InteropServices.COMException (0x800002CD): Fehler beim Laden der Datenbankinformationen.
Details: Die Datenbank-DLL 'crdb_p2sifmx.dll' konnte nicht geladen werden.
Fehler beim Laden der Datenbankinformationen
   bei CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
   bei CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   bei CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   bei CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   bei CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   bei CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   bei CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()

That means i only had to update to IX Developer. Install it on my machine and i can do this ?
To make it clearer:
I have many Reports which is designed in Vers. 8.5
If I open the report in CR 11.5 I have to logon to the Database. This step i need to do by Code.
So if i can logon i think the other things will also work.
The Reports, which didn't ask for a database logon, work. So this is the only difference.
I need no Connection for my work i have to do, because i only use the Saved Data in the report.
So a few questions :
1. Can i do a logon automatically ?
2. Can I clear the Database Connection to use only the Saved Data with Code ?
I'm happy about any answer

How to see output in GTS for Customs documents

Hi experts,
could you please let me know how to see outputs for customs documents like origin of certificate for US. (ex: like in SD to see order output VA02 then goto issue output)
let me know the Path or Transaction code to see output on system.
Regards
Reddy

Hi
Follow the path:
Customs Processing - Import/Export>Monitoring>Customs Import/Export Declaration>Display Available Customs Export/Import Declaration>Communication Tab
Or try
T-Code: /SAPSLL/CL_CUS_03
Check for Certificate of Origin
Regards
Vivek

GTS Export Declaration document Error

Similar Messages

Maybe you are looking for