GTS - Legal Export documents

Hi all,
I have created Some order for SPL check and some order for Embargo check for export in Feeder system. I can see blocked documents in R3.
but i am unable to see the blocked documents in GTS
Area Menu: Legal Control Export: under motoring - Display Blocked documents
Area Menu: SPL Screening - Display Blocked documents
please let me know the where is the problem.
regards
Tarun

Hi,
If your friend can see the blocked documents in GTS, then probably its not a system error. And document did travel to GTS.
It sounds odd but are you entering the document reference number in GTS document data field instead of Document data in Feeder System field?
Because by mistake if you are doing that you will get a similar error message "No data was found for the selection Criteria"
Regards
Vivek

Similar Messages

Legal Control : Document Type Mapping not Maintained

Getting an error SAP GTS :Legal Control : Document Type Mapping not Maintained ,while creating order in feeder system .
I checked the configuration maintained SAP Global Trade ServicesSAP Compliance ManagementGeneral SettingsDocument StructureAssignment of Document Types from Feeder Systems-Assign Document Type at Feeder System Group Level
Similarly I checked for item category.
Please let me know what further configuration have to be maintained for correcting the error.
Thanks & Regards

Hi,
The document type mapping is required in R/3 system too. You have to maiatain order type say OR/TA in R/3 below path
IMG--> Sales and Distribution --> Foreign Trade/Customs --> SAP Global Trade Services - Plug-In --> Control Data for Transfer to SAP Global Trade Services --> Configure Control Settings for Document Transfer --> SDOA.
Note: If you maintain OR in R/3, you will have to maintain same in GTS. if you maintain TA in R/3, same maintain in GTS.
Regards,
Lakshmikanth

Compliance check for export document

Hi GTS Experts,
I need to block the export document by checking some flags. Where do I implement the logic of blocking the export doc (any user exits or badi's) and how do I block the doc?
Quick help is much appreciated.

Hi,
you can use the userextis in the feeder system after mapping:
Exit SLL_LEG_CDPIR3_002
Badi:
badi_ifex_call_sd0a - for sales orders
badi_ifex_call_sd0b - for deliveries
badi_ifex_call_MM0a - for purchase orders
best regards,
christin

GTS Error " SAP GTS : Legal Control : P.O is locked"

Hi,
I am getting the error saying " SAP GTS : Legal Control : P.O(4502089260) is locked".
Pls help me.
Regards,
krishna

Hi Leela,
You should check the document in GTS directly whether it's just "lame" block or a real hit. If it's not a hit (the Business Partner may have been found as SPL relevant because too sensitive settings etc.) you just manually unlock the document. To do this follow the path:
- go to /sapsll/menu_legal
- SAP Compliance Management > Sanctioned Party List screening
- In part Documents click Manually Release Blocked Documents
- Enter Document number
- Select (Mark) the document
- Press Green Flag icon (Cancel Boycott List Block)
- Maybe you will need to recheck the document (the same menu as release)
Keep in mind the procedure works if there's set SPL block only.
Best wishes,
Roger

Re-Check Import/Export Documents

Could someone explain in what circumstances we would need to use the transaction: Re-Check Import/Export Documents, /SAPSLL/CUHD_MR_SPL.
Thanks

Hi,
Wehn we change some config settings in GTS, no need to go back to the ECC system and again check the effects... from here, we can recheck the customs document and find the changes reflecting.
It is something like assigning the new settings to the existing documents.
For Ex: We've modified the LC attachement from manual to Automatic, we can go to Re-Check option and enter the Ref. SO and find the details.....
Thanks and Regards,
Shiva

Bypassing holds of export documents in complaince check

Hi Experts,
My requirement is to release / bypass the holds in export documents if it is blocked by missing ECCN.
I want to know how I can accomplish this.
There are only 6 BADI's in GTS.. and the one which is used for releasing the blocked documents /SAPSLL/CUHD_RELEASE is not multiple use... and it is used by standard SAP. so I am unable to create a Z implementation of it..
Please give me some ideas how to release the documents.
Quick reply will be highly appreciated.

Use specific reasons for release with release codes for your blocked customs documents. This can be done with configuration, but it would be manual and also save the effort for Zdevelopment.
Isn't there a way in which you can maintain statistical ECCN number for your products? Are you using License Management?

Scanning legal size document on HP 6520

How do I scan a legal size document on my new HP Photosmart 6520? Glass size is letter size. Is there a document feeder above the paper tray? Not working so far. Thank you.

Hello kurebeach1,
Welcome to the HP Support Forums! I understand you would like to do legal size scanning on your HP Photosmart 6520. After checking the HP Photosmart 6520 Product Specifications, the biggest scanning size is 8.5 x 11inches, the PS 6520 does not support legal size scanning.
See image below:
I hope this answers your question!
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Help with exporting document and generating an enumerated value error

Can anyone help me figure out why I cannot get this script to export the document and save it for the web?
I keep getting the same frustrating "Enumerated Value expected".
here is the script thus far:
* attempting to create a script to insert names automatically within photoshop cs2. Similar to the PSP.
tag = app.activeDocument;
var lee = ["Barb","Belle","Betty","Carmel","Christy","Connie",
"Debbie","Debra","Denise","Diamond","Dolceluna","Irene","Jacqui"];
//determine if active layer is a text layer or not.
if(tag.isBackground == true){
alert("this is a background layer and cannot be changed.");
else{
alert("this is the name layer.")
for(i=0;i<lee.length;i++){
tag.activeLayer.textItem.contents = lee[i];
var options = new ExportOptionsSaveForWeb();
options.format = SaveDocumentType.PNG-24;
options.interlaced = false;
options.PNG8= false;
var fName = lee[i];
var newName = fName+'-'+tag.name+'.png';
alert(newName);
//EXPORT DOCUMENT KEEPS GENERATING ENUMBERATED VALUE EXPECTED
// web.matte = MatteType.NONE;
tag.exportDocument(File(tag.path + '/' + newName),ExportType.SAVEFORWEB,options);
} // closes for loop
}// end of else statement

Yes the guide is misleading. It says 'For this property, only COMPUSERVEGIF, JPEG, PNG-8, PNG-24, and BMP are supported.'
It really should say 'For this property, only COMPUSERVEGIF, JPEG, PNG, and BMP are supported.'
But if you look under SaveDocumentType you will not find PNG-8 or PNG-24 listed in the values.

I am trying to scan a legal size document from my Canon printer onto my MacBookPro. It scans the document as a letter size.

I am having trouble scanning a legal size document from my Canon printer onto my MacBookPro. I have set the printer paper size option to legal size on my printer. The scanned document comes through as a letter size document after scanning. I do not see an option in iPhoto to change the paper size.
Can anyone advise?
Thanks.

Lazy Oak wrote:
I am having trouble scanning a legal size document from my Canon printer onto my MacBookPro. I have set the printer paper size option to legal size on my printer.
Experience has taught me that it pays to be very precise and specific when dealing with computers. Precisely and specifically, what you describe is impossible. It is impossible to scan a document (of any size) with a printer.
I surmise that you are using an all-in-one, ie, an apparatus which combines a printer, a scanner, and sometimes a fax machine, in the same device. That takes us to the next step -- the page size set for printing is used for printing -- it has nothing to do with scanning. It may be possible that Canon provides software which synchronises page sizes used for printing and for scanning, but we don't know what applications and drivers you are using…

Unable to Completely Scan Legal Size Documents with Officejet Pro 8600 Plus

I am trying scan legal sized documents on my new Officejet Pro 8600 Plus. I have reviewed the forums, and this has been a recurring problem in the past (see link--- http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-Legal-Size-Documents/m-p/35416#M14... ), but does not appear to be resolved. Whether I use the document feeder or the glass, the document is cut off at the bottom, and appears to be stopping at the 'A4' size, vs. legal. I cannot locate any setting on the scanner itself, or in the HP Utility software to change this, or even to be able to identify the current setting, if it is one.
I am using a Mac Pro, system 10.6.8, just installed and started using the printer a couple of days ago, and everything is up to date software-wise. Everything else on this machine has been working beautifully.
Can anyone identify what's going on here and how to correct it?
Thanks for your help--I specifically chose this particular unit over the next model down due to the legal sized glass/bed, and if I can't use it to scan legal docs, well, that's a problem. Thanks for your help!
This question was solved.
View Solution.

Hello,
Please try the following steps:
1. Open the HP Utility and select your device.
2. From Scan Settings open the "Scan to Computer".
3. Click the "Scan Tasks" tab.
4. Select the Scan Shortcut used to scan, then click Edit.
5. In the section of Scan from an HP Device click on the blue triangle to enlarge the menu.
6. From the enlarged menu now open the drop-down menu next to Crop To and set as None.
7. Click OK and try scanning again.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

LASERJET 100 MFP M175MW scanning legal size document problem

I am on a Macbook Pro, running OS X 10.8.5. I am also using the HP Scan software 4.0.
I am having problems scanning a Legal Size document. It always cuts off the bottom portion, acting like it was only us letter size.
After loading a document onto my scanner/printer:
I open the HP Scan software,
Select the Scan Button
Change the Crop to US Legal in the dropdown area.
Continue
Then when I look at the image scanned in, it is not complete.
Is there something else I need to do to make this work, maybe a setting on the actual scanner/printer.
I have tried to read all support documentation possible and I cannot get this to work. I even updated all my operating systems upgrades, but I am not running Maverick yet.
I would be thankful for any help at all.
Thanks!

@MAMAC4
To my knowledge the only way you can scan legal is from the ADF, have you tried that? If you are trying to scan legal sizs docs from the flatbed than you will experience the cut off that you are stating in your post.
Please try to re-scan the document using your ADF feeder and see if this will solve your issue.
Thank you.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP Officejet Pro L7590 (L7555) has legal size flatbed but won't scan legal size documents - WHY?

HP Officejet Pro L7590 (L7555) has legal size flatbed but won't scan legal size documents - WHY? Scanning to a Macbook Pro osx (10.6)

Hey there. What application are using to scan? Have you tried using a different application like Preview or Image Capture?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to set "embed icc Profile" option to export document as JPEG

Hi All,
While exporting the document as jpeg, through File->Export, there is an option "Embed ICC Profile" as figure shows.
How to set it if I am exporting the document through my program in which I rasterize the document and used
the sAIImage->AsJPEG(raster, jpegDataFilter, params);
I didn't find any option in AIRasterizeSettings or AIImageOptJPEGParams to set this flag.
plz anyone suggest me how to do so.
Thanks,
Rud.

thanks for you through out help.
I use the folowing code which executing properly,but there is no effect on JPEG whether the value of jpegparam.s.jpeg.embedICCProfile is 0 or 1.
/////Start
ASOptimizationSettings jpegparam;
jpegparam.fileFormat = asffJPEG;
jpegparam.s.jpeg.embedICCProfile = isICCProfileEmbeded;
ASInt32 optID;
optID = sAIOptSet->GetUniqueOptimizationSettingsID();
error = sAIOptSet->SetOptimizationSettings(optID, &jpegparam); // after executing this line error = 0
/////End
I guess it would work when we export document as jpeg through AIActionManagerSuite
not with rasterizing the layer's art and then exporting them as JPEG using AsJPEG().
thanks

How do I edit a exported document?

How do I edit a exported document?

Sounds like you're pretty new to Lightroom. Rather than open a new thread for each basic question, I think you need to do some reading. I suggest:
http://forums.adobe.com/community/lightroom/lightroom_for_beginners
http://www.lightroomqueen.com/free-downloads/quickstart/lr5/
You could even try the Lightroom help.

When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

Apple Mail uses Apple's own PDF viewer, and it's ... well, let's be friendly and say not really up to par. Don't use it for anything else than ascertaining there is *something* in your mail. Then use the free Adobe Reader to view your PDF.
See this recent thread: http://forums.adobe.com/message/4526583

GTS - Legal Export documents

Similar Messages

Maybe you are looking for