GTS RFC Connection problem
Hi,
I am not able to transfer data from R/3 to GTS. Getting message "No RFC destination is defined for GTS".
i have defined and assigned the GTS logical system, maintained RFC calls, method calls and ALE distribution model. Still getting same message.
RFC connection test is working fine.
Can somebody please help on this?
Thanks
Bob
> I am not able to transfer data from R/3 to GTS. Getting message "No RFC destination is defined for GTS".
Where do you get that error message?
Markus
Similar Messages
-
Recurring RFC connection problems
Hi!
I really need some help. We have been experiencing RFC problems for a few months now and our basis team have no clue as to what the problem might be. The problem is that on a daily basis we experience RFC connection problems. It usually happens at about 7am in the morning and lasts for an hour. After that the problem clears itself and for the rest of the day runs smoothly.
We clearly see this problem on our RFC connection to the IBM MQ message server which handles all our incoming and outgoing IDOCS. This is however not the only RFC problem as we have also had RFC connection failures when switching between instances in SM51. This suggests to us that it is probably not a network issue, although the MQ server is housed in a different data center than the SAP servers.
We are running ECC6 and our environment looks like this:
4 hosts running 5 instances: 3 hosts with one instance and 1 host with 2 instances.
While this problem is occurring you can do a connection test in SM59 to MQ which is usually successful. In SMGW we have picked up that it is trying to establish multiple connections to MQ, some connects successfully and some cannot connect. In ST11 in the RFC trace files the error message says that the MQ connection times out.
While monitoring the MQ server we cannot pick up any problems. The MQ server itself seems to run without errors. The only problem is that it cannot connect to SAP to send IDOCS and SAP cannot connect to MQ. The load on the MQ server while this error occurs is minimal compared to the rest of the day.
Does anyone have any ideas as to what the problem might be? Are there any other places other than the ones mentioned in this mail where we can check for errors?
Thank you in advance!
IwanHi Marcelo,
In SM59, just select the RFC and above in same screen you can see the options
RFC----- Display Trace (Shift + F8)
Check the trace file and see if there is any connection problem between the two system.
Regards,
Ravi -
Hello All,
We are setting up communication between R/3 4.7 and SCM 5.0 system for EWM (Extended warehouse management) with RFC connection and using IDocs to transfer data from one box to another box.
IDoc from R/3 to SCM system is working fine, we are able to complete the transactions in SCM system and after successful completion all transaction in SCM it should trigger Idoc for R/3 which is not happening.
It throws error as <b>"An RFC destination could not be specified for the logical system XXXCLNT123"</b>
We have checked SM59 (RFC connection), WE20 (Partner profile), WE21 ( IDoc port connection) it seems fine.
Interesting thing is we are able to get information about stock from R/3 system in SCM system which are correct information.
Can anyone give some idea if we are missing something to check?
Thanks & regards
Arif MansuriHi Team,
We have the same problem , which was mentioned above. Please let us know, which Message type need to be used for sending the stock information to ERP after Delivery completion
The following Process we followed
PO Creation---ERP
Inbound delivery-ERP
Inbound Delivery Process-EWM
WareHouse Task-EWM
Unloading-EWM
WareHouse Task/WareHouse Order Confirmation-EWM
Once the WT/WO is confirmed , Goods receipt status is updated automatically and "Post Processing Framwork (PPF) status shows with RED and error message says."An RFC destination could not be specified for the logical system E6SCLNT900"
Here I have one doubt, We have maintained client names as A0000039 (for EWM,but original client name is SC7CLNT100 ) and E6SCLNT900 ( for ERP , original client name also E6SCLNT900)
Will there be any issue with A0000039?(because we did not maintained as per the original client name ie SC7CLNT100)
Thank you for your help
Thank you -
Trusted RFC connection Problem
Hello,
Trusted RFC connection between two systems when the results are negative. The error we get is "You Are Not authorized to logon to the target system (error code 1)." But everything looks smooth (kernel, logfiles, etc.).. S_rfc users and has s_rfcacl objects. Where do you think could be problem?
RFC trace log files;
dev_rfc0
Trace file opened at 20100503 232709 GTB Daylight Time, SAP-REL 700,0,236 R
======> You are not authorized to logon to the target system (error code 1).
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFCPING
User: P0326 (Client: 100)
Destination: RFC001 (handle: 2, 21766343, {3CF256DF-FE74-F105-BF85-000C29E0B2F6}
dev_rfc1
Trace file opened at 20100503 233011 GTB Daylight Time, SAP-REL 700,0,236 R
======> No authorization to logon as trusted system (Trusted RC=1).
ABAP Programm: SAPLSYST (Transaction: SM59)
Called function module: ABAP4_LEAVE_TO_TRANSACTION
User: P0326 (Client: 100)
Destination: RFC001 (handle: 2, 21951359, {A7F256DF-F7BE-F119-BF85-000C29E0B2F6}
Trace file opened at 20100503 233115 GTB Daylight Time, SAP-REL 700,0,236 R
======> Name or password is incorrect (repeat logon)
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFCPING
User: P0326 (Client: 100)
Destination: RFC001 (handle: 2, 22021687, {D1F256DF-90D2-F15E-BF85-000C29E0B2F6}
Trace file opened at 20100503 233127 GTB Daylight Time, SAP-REL 700,0,236 R
======> You are not authorized to logon to the target system (error code 1).
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFCPING
User: P0326 (Client: 100)
Destination: RFC001 (handle: 2, 22034437, {D8F256DF-78D3-F1BE-BF85-000C29E0B2F6}
Regards
ismailHi,
In addition to the auth object, First make the entry in SMT1 with the normal RFC here the rfc should not be enabled as trusted.
Then create an entry in the target system as well, one the entries are made in tcode SMT1 in both the systems, then enable both the RFC's as trusted RFC it will work fine then.
Regards,
Vamshi. -
RFC Connection Problem between Production Server & Solution Manager
Hi,
I want to make a RFC Connection between Production Server & Solution Manager.
But when go through Tcode- SM59 and click on Remote Logon from Production to connect Solution Manager it showing me a Client/Userid/Password window and when i connect go through Solution Manger to Production Server it connects normally. I already done the same process in both the clients, as i already mentioned Logon details in the Logon/Security tab but why it is showing me Client/Userid/Password pad when i am login through Production to SolMan?
+Tell me where the actual problem is! In my Solution Manager end or in my Production Server end +
I want to access Solution Manager from Production Server on just clicking once on Remote Logon from Tcode- SM59.
Thank you.
Edited by: varun@pcl on Jul 31, 2010 4:40 PMHi
Mention which Client u login and valid username and password from both PROD Server and Solman .
https://websmp201.sap-ag.de/support under Solman manager .
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
Regards -
RFC connection problem in ECC 4.7 and ECC 6.0
Hello friends,
Created RFC connection in 4.7 version of SAP and used it in a java program. (STFC_connection) was the function module used.
it all worked fine. Later when i tried the same thing in ECC 6.0 it failed and throws communication_failure exception .
please guide me in this issue.Hi...
Check the Unicode/Non unicode status in MDMP&UNICODE tab present in transaction SM59 while chking the connection.
if your ECC6.0 is unicode system then you need to check the radio button present for Unicode in MDMP&UNICODE tab.
Regards,
Lokeswari. -
RFC connection problem during SRM - R/3 integration
Hi,
Our environment is SRM 5.5 server with 2 R/3 backend systems. One of the R/3 systems is in another country. We happen to have RFC problems during the communication between the SRM and R/3 server.
Below you can find the SM21 log related to an operation on SRM server. What might be the reason for this problem? Does anyone know the solution?
Many thanks
Details Page 2 Line 26 System Log: Local Analysis of sapsrmt 1
Time
Type
Nr
Clt
User
TCode
Grp
N
Text
10:24:58
DIA
000
013
EMREK
R4
9
Communication error, CPIC return code 020, SAP return code 223
Communication error, CPIC return code 020, SAP return code 223
Details
Recording at local and central time........................ 07.12.2006 10:24:58
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
91342
Dialog work process No. 000
EMREK
XXXXXXXX
2
K
SAP Web AS Problem
STSK
Further details for this message type
Module nam
Line
Error text
Caller....
Reason/cal
thxxhead
7192
020223
ThRecei
CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find more
detailed information about the error in the system log for the SAP
gateway.
Meaning of the SAP return codes:
1) Gateway errors:
221,,Error in CPIC-SS
222,,Storage bottleneck
223,,Network read error
224,,Network write error
225,,Invalid request
226,,No connection yet
227,,Gateway process terminated
228,,Shared-Memory problem(read)
229,,Shared Memory problem(write)
230,,No free LU
231,,No free gateway process
232,,Error when starting gateway proc.
233,,Incorrect communication type
234,,Connection setup failed
235,,Error in comm. table
236,,No connection to gateway
237,,Connection to gateway closed
238,,Error in GW command (write)
239,,Error in GW comm. (read)
240,,Invalid length
241,,Invalid environment
242,,Timeout
243,,Error setting up SAP connection
244,,Partner has closed connection
245,,Storage overflow
246,,Incorrect APPC header version
247,,APPC server not started
248,,Error accessing TXCOM
249,,Comm. table is full
630,,Invalid mode no. received
631,,Max.no. of gateways reached
632,,No LU specified
633,,Max.no. of clients reached
634,,Invalid TP name
635,,fork failed
636,,Invalid NI handle
637,,rexec failed
638,,TP start failed
639,,NiDgSend failed
640,,Internal error
664,,Gateway host is unknown
665,,Gateway service unknown
666,,NI error
667,,exec failed
668,,R/2 restarted
669,,Symb. destination too long
670,,No more side-info entries
672 ,,Logon to NetWeaver failed
673 ,,IMS Error Purging
674 ,,Timeout for registered programs
676 ,,TP not registered
677 ,,Timeout for registered programs
678 ,,TP is registered
679 ,,TP is not registered
720 ,,Security breach of registered programs
721 ,,SNC deactivated
722 ,,SNC required
723 ,,SNC name not defined
724 ,,Default SNC name not permitted
725 ,,Protocol does not support SNC
726 ,,No local SAP System
727 ,,SNC required
728 ,,Conversation ID not found
729 ,,SNS must do the communication
730 ,,Start of external programs deactivated
731 ,,Gateway shut down
732 ,,No external programs
733 ,,Conversation ID does not match
734 ,,Net conversation error
735 ,,Monitor is not active
736 ,,Conv-ID is not unique
Errors in the CPIC Interface:
450 ,,No storage
451,,No side-info entry
452,,TP-START failed
453,,No initialization
454,,"getlu" failed
455,,"signal" failed
456,,Timeout during conn. setup
457,,CMALLC failed
458,,CMSEND failed
459,,Prepare-To-Receive failed
460,,"mc_flush" failed
461,,CMRCV failed
462,,Argument missing
463,,"get_allocate" failed
464,,CMDEAL failed
465,,TP-END failed
466,,Max.no.of conv. reached
467,,"snaopen" failed
468,,"snactl" failed
469,,No flush in IBM environment
470,,"snaclse" failed
471,,Status error
472,,No side-info entry
473,,No conversation
474,,Connection closed manually
475,,Connection closed automatically
476,,No partner found
477,,Confirm failed
478,,Confirmed failed
479,,GWHOST not in side-info entry
480,,GWSERV not in side-info e.
481,,PROTOCOL not in side-info entry
482,,LU not in side-info e.
483,,TP not in side-info entry
484,,No conn.to gateway
485,,gethostname failed
486,,SAP_CMACCP not executed
487,,Program not in argument list
488,,Host not in argument list
489,,Service not in argument list
490,,Conv-ID not in argument list
491,,Invalid parameter
492,,LU62CVCT failed
493,,LU62ATTCH failed
494,,No CONV table
495,,Incorrect conv.table
496,,Invalid conv modification
497,,NiHostToAddr failed
498,,NiAddrToHost failed
499,,Read operation tab.THOST failed
500 ,,No side info file exists
501 ,,CMRCV failed
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
6
245700
m
Error (Function,Module,Row)
R4
9
020223 ThReceiCPIC-Erthxxhead7192Hi,
It will be very difficult to solve without being on the customer site and having all information.
Right now, the error code is network error...
Kind regards,
Yann -
R/3 - XI - R/3 RFC connection problem
hello friends,
I have a scenario which is R/3 -> XI -> R/3.
Since i do not have another R/3 system i am trying to configure sender and reciever on the same system with different clients.
The sender configuration is working fine. Please tell me the setting for the reciever configuration.
Current settings that i have done are --
Message server - <host name>
Message server service - 3600
System Id - <system id>
Logon group - public
When i try to execute the BAPI_USER_GET_DETAIL BAPI it gives me the following error --
<b>"lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS"</b>
thanks in advance,
Abhi<i>Please can you tell me how to access these Notes. I have never been able to find any such notes :(</i>
For this you need to have SAP service MArket Place id.
Go to https://websmp108.sap-ag.de/notes then give the ,give mentioned SAP Note number-
Anyway the content of the note wrt this problem is here- from SAP Note- 730870
<i>Q 19: While sending a RFC call to the RfcAdapter I get a error message like "com.sap.aii.af.rfc.afcommunication.RfcAFWException: lookup of binding via CPA-cache failed..." or "com.sap.aii.af.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed...". What is missing?
A: The RfcAdapter trys to find a Sender Agreement for this RFC call but the lookup failes. The values used for this lookup are:
Sender Party/Sender Service: The values from Party and Service belonging to the sender channel.
Sender Interface: The name of the RFC function module.
Sender Namespace: The fix RFC namespace urn:sap-com:document:sap:rfc:functions
Receiver Party/Receiver Service: These fields are empty. This will match the wildcard '*'.</i>
BTW, did you recheck your RFC adapter configuration. And activate it.
Regards,
Moorthy -
RFC connection problem BW3.5
Hi all,
we are trying to configure the connection between a BW3.5 and a CRM4.0 box.
Neither the automatic source system creation nor the SM59 setup is working.
When testing the connection, we get a 'Gateway' error message.
The BW system is already talking to a R/3 box and the CRM box as well.
Any ideas?
Thanks & Best Regards,
EricThe Basis guys reviewed the technical settings of the BW system and figured out that some services were not properly defined.
Sorry, I dont have further details on hand. -
RFC Receiver adpater Connection problem , Help us to solve ?
Hi Friends ,
Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given <b>Maximium connection property to 1</b> .
While multiple set data passed to rfc will connection problem will come ?
Most data not uploaded . I am getting the following error.
<b> If i set max connection to 5 . It is 5 times or more than that it is pusing the data .</b>
i am getting the following error <b>while i set the Max connection to 1 .</b> . <b>Any other place i need to change configuration ?</b>
<i><b> - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.</b></i>
Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan<b></b>
Message was edited by:
ranga rajanHi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
Akshay Jamgaonkar -
Problem with RFC connection - tp program not registered
Hello everyone
recently there has appeared a problem with the RFC connection on our system - we received the following set of messages:
Trace file opened at 20101221 130738 Central European Standard Time, SAP-RE
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Tp program is not registered.
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: xxx(Client: 100)
Destination: SIDRFC_IFSAPHRCZPKCP (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Program transakcji nie jest zarejestrowany
DEST =SIDRFC_IFSAPHRCZPKCP
HOST =%%RFCSERVER%%
PROG =IFCZPKCP
GWHOST =ssapprod
GWSERV =sapgw21
I tried to register program with a command:
rfcexec -aIFCZPKCP -gssapprod -xsapgw21
but with no success - the program didn't appear on the list of logged clients on the system in gateway monitor. Frankly speaking we do not know now what else we can do - please help!
We have ECC 6.0 (SAP_BASIS 700 SP18) on Windows Server 2003 R2 x64.
Thanks in advance for any help.
Regards
PeterHi Salim
thanks for your reply.
./rfcexec -a(PROG_ID) -gssapprod -xsapgw21 &
The syntax you're providing refers to UNIX systems, but I did similar thing on our Windows system - I tried all of the following methods (unfortunatelly without success):
rfcexec -a(PROG_ID) -gssapprod -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod -xsapgw21
rfcexec -a(PROG_ID) -gssapprod.domain -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod.domain -xsapgw21
Can you advise me what to do now?
Thanks
Piotr -
Facing problem with RFC connections
In the Maintenace View for RFC connections, when I press the 'Apply' button I am getting the message"You have no authorization to display the destinationu201D for all the 4 destination IDs"
Can somebody suggest on how to overcome this problem?
Thanks,
Mohammed Tauseef AhmedHi
The message over here means the user with which you are logged into the control system and the CPIC user that you may be using to create RFC destinations to the other systems in the landscape do not have the right authorizations.
It is recommended that all the users have the role TDMS_USER (atleast) or TDMS_MASTER assigned to it.
Once the role is assigned it will work fine.
Regards
Pankaj. -
Hi Gurus,
I have a problem when i try to do a RFC connection Between SAP and Windows, this's the error message log Tx, sm59..
EntrSist. Error de conexión
Det.error / CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=236 SAP gateway connection failed. I
Det.error ERROR: SAP gateway connection failed. Is SAP gateway started?
Det.error LOCATION: SAP-Server devinc_ICT_02 on host devinc (wp 1)
Det.error COMPONENT: CPIC
Det.error COUNTER: 6
Det.error MODULO:
Det.error LINE:
Det.error CÓD.RETORNO: 236
Det.error SUBRC: 0
Det.error RELEASE: 700
Det.error TMP.: Tue Aug 31 11:13:57 2010
Det.error VERSIÓN:Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV 3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim -
RFC connection error for PS_ACCESS_1 and PS_ACCESS_2
dear all,
i have created the RFC destination PS_ACCESS_1 and PS_ACCESS_2 with TCP/IP. i also installed WDPS* files in *sapgui\ps\access folder. now i m checking for 'TEST CONNECTION' in sm59 for PS_ACCESS_1 and PS_ACCESS_2 but it is giving 'Error when opening an RFC connection' this error. pls suggest the solution for this problem.
am i missing any other settings? i m using SAP ECC 6.0. is it comfortable with this? is it required any configuration from basis side?
regards,
vicky.HI,
please check the RFC Trace File at SM59 -> RFC -> Show trace file.
For better tracing delete the Trace File first and recheck the RFC Dest.
Regards,
Gordon -
Dear All,
when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 162003
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1973
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Apr 27 14:29:33 2009
Error Details VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat
Maybe you are looking for
-
Hi Gurus, I am working in a portal related project, Where i need to material master search. Any suggestions on what would be Important Search parameters i can use in searching for material master Numbers? Thank you ANil
-
Multiple business roles and org data determination
Hello together, we are having an issue with the organizational data determination. Some users have multiple business roles in different sales organizsations. This means, they are assigned to several units in our org modell. This users can select the
-
hello i would like to learn how i can create a flat file db..just for the sake of it. can anyone tell me what i need to lookup and learn. thanks alot.
-
Console Launcher/THX-Console do not recognise X-FI Titanium
Hi, I bought a PCI-E SB X-FI Titanium yesterday. Unfortunatly I have got some major Problems. First no sound was played, but I managed to fix it. Then I tried to install the Creative Console Launcher & THX. No Chance. The Installation either won`t re
-
Hi, Does anyone know what needs to be maintained where to allow a user to change the CnTy (condition type column) in a sales order at the line item? Thank you