GTS with BW on HANA = Sanctioned Party List Reporting
Dear All,
Since our company will be installing HANA in our BW environment, does anyone know if Santioned Party List Screening Analysis related to SAP GTS will be available after the install in BW OR does HANA need to be installed within SAP GTS environment to gain access to this reporting?
I've read the following information, see below links, and I'm hoping it's not the later. Any guidance is always appreciated. Thank you.
Sanctioned Party List Screening Analysis - SAP HANA Live for SAP GTS - SAP Library
Release Notes for SAP HANA Live for SAP Business Suite 1.0, Q3/2 - SAP Library
Please note that I did received a prompt response from SCN participant mentioning that GTS has to be on HANA too. I'm looking for additional readings and guidance on 'activating' SPL reporting using the HANA functionality.
Sincerely,
Claire
Hi Claire,
First "Sanctioned Party List Screening Analysis" is VDM not reporting.
You could use tools like crystal report or Lumira to generate report.
Considering installation, you first need to install HANA DB including HANA Live content.
I think you are talking about side-by-side approach which means (GTS is one system using non-HANA DB and BW is another system using HANA). Then you need to replicate tables according to note 1780655 to your BW system.
Best regards,
Vincent
Similar Messages
-
Sanction Party List [SAP GTS] Reporting & HANA on SAP BW
Dear All,
Since our company will be installing HANA in our BW environment, does anyone know if Santioned Party List Screening Analysis related to SAP GTS will be available after the install in BW OR does HANA need to be installed within SAP GTS environment to gain access to this reporting?
I've read the following information, see below links, and I'm hoping it's not the later. Any guidance is always appreciated. Thank you.
Sanctioned Party List Screening Analysis - SAP HANA Live for SAP GTS - SAP Library
Release Notes for SAP HANA Live for SAP Business Suite 1.0, Q3/2 - SAP LibraryHi Claire,
If the sanctioned party list screening reports need to be displayed GTS server needs to be added on HANA studio. Basis can do the Initial setting and all the table related data will be moved as schema into HANA and reports will be available .No further installation of HANA is required.
Thank you
Karthi -
Dear GTS Experts,
While creating sales order I am getting Sanctioned party list blocked, but I am able to create delivery, and PGI.
Where Is the wrong ?
Thanks a lot
Venu gopalDear Venu
Based on your message shown in the system, can you check the field in Control Settings for System Reaction in the Document type settings via Application Levels in the feeder system. This Field '' System Response in Feeder system if SAP GTS fails'' should be maintained with ''A''. I think in your case it could be 'Blank'' Thats why the system is allowing you to create the subsequent documents accordingly.
Please let me know if any further inputs required. -
Separate legal regulation for customers and vendors / sanctioned party list
Hi,
since we want to separate responsibilities and mails for checking sanctioned party lists concerning customers (sales department) and vendors (purchasing department) we would like to split business partners using different legal regulations within the GTS system.
But customers as well as vendors are connected to both regulations after uploading, since there is only the country to separate them.
All checks concerning sanctioned party list screening should be separated according to the responsibilities as well.
Is there a way in customizing to solve this? If not: how best could this be done using programming?
Thanks for your help!Hi Pici,
Take a look at the BAdI Method ACTIVE_LEGAL_REGULATIONS_GET. There you should be able to use the Partner attributes to influence which Legal Regulation is used for the checks.
Regards,
Dave -
Hello All
I am an independent consultany. I am trying to upload the SPL file in GTS (8.0). I am getting an error (No Country Code is assigned to the SPL Entity). It is true that no country code is present for this SPL entity. Can we override or create a country code for Unknown countries?
How can we handle this condition?
SudhirHi Sudhir,
1. Find out the Error country code by checking the upload logs.
2. There will at least one country code differing with the Country Key in the system.
Eg. In the System you would have Configured Russia as RF and the XML file will be having as RU
3. Go to SPRO --> SAP Global trade services --> General Settings --> Define External Country Codes for Data upload
Here maintain an entry which suits the XML file entry
Eg : RU for RF for the legal regulation maintained for SPL upload
4. Perform the upload again. System will not give you the error. -
Sanctioned party list screening
Hi All,
I tried to run t.code-/n/SAPSLL/SPL_CHSC1MLO which is used for check business partner Address(Batch). I have set up 36 variants . When I tried to execute each variant which takes normally 6-7 hours to complete each variant. Which is not normal. Earlier it was taking 12-14 hours to complete all 36 variants. I am running in testing server.
Can you please give some advise on this ?
Appreciate if you can confirm at the earliest.
Thanks
SitsReset Buffer initializes the Comparison procedure and Legal Control . This required because SPL screening function does not directly access the SPL master records and the business partner addresses, but it accesses comparison indices that the system automatically generates when it is creatiing SPL master records or business partner data. A comparison index splits SPL master records and Business partner addresses in to Comparison terms.
So each time when you upload master data of SPL, this needs to be done to reset/initialize old comparison terms and generate new ones. -
Foreign Trade Module-Sanctioned Party Config
Hello
My company is looking at implementing the Foreign Trade Module (not GTS). Does anyone have information about creating the Sanctioned Party Screening in Foreign Trade? The white paper on Legal Control mentions the capability for boycott lists, but I can't find this in the configuration. Any information would be helpful.
Thanks for your help
Edited by: schella on Nov 1, 2011 9:52 PMHi,
Go through this link it might helpfull to you.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/d8/2585347860ea35e10000009b38f83b/frameset.htm
Thank you, -
Dunning letters printing with zero balance and no invoice listing
How to trouble shoot 'Dunning letters printing with zero balance and no invoice listing' problem
As per my understanding it could be due to OB22 settings.
refer following SAP notes
335608,191927,
373296 -
T.code FBL5N: a problem with the print of the output list
Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PMHi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi -
Hi. When I go into my contacts and type a letter in the saerch bar to get to a list of last names that begin with that letter I get a list of random names that don't begin or end with the letter. My Settings appear fine. Any insights would be greatly appreciated. Cheers Bill
The search bar is not designed to take you to names beginning with the letter you put in. If you want to do that, use the letters down the side. In the search bar, the device will return results for all contacts that have that have that letter in them. If you type a couple of letters of the name, you'll find what you want faster. Once you get used to how it works, it's quite efficient.
Best of luck. -
My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
SkipI am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
2014-11-13 QuickLookSatellite crash x2
2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
Dec 1 20:08:30 jnl: disk3s2: journal replay done.
Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
com.cisco.kext.acsock (1.1.0)
com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
com.cisco.anyconnect.vpnagentd
com.oracle.java.JavaUpdateHelper
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.wdc.WDSmartWareService
com.oracle.java.Helper-Tool
com.adobe.fpsaud
com.wdc.SmartwareDriveService
Agents
com.adobe.AdobeCreativeCloud
com.zimbra.desktop
com.citrix.ServiceRecords
com.google.keystone.system.agent
com.apple.photostream-agent
com.genieo.completer.download
com.genieo.completer.update
com.cisco.anyconnect.gui
com.citrix.ReceiverHelper
com.citrix.AuthManager_Mac
com.citrix.FMDAgent.14800.UUID
com.oracle.java.Java-Updater
com.fiplab.MailTabProHelper
com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
com.citrixonline.GoToMeeting.G2MUpdate
com.apple.AirPortBaseStationAgent
com.microsoft.SyncServicesAgent
Startup items
/System/Library/StartupItems/ciscod/ciscod
/System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
/System/Library/Extensions/hp_fax_io.kext
- com.hp.kext.hp-fax-io
/System/Library/Extensions/hp_Inkjet1_io_enabler.kext
- com.hp.print.hpio.Inkjet1.kext
/System/Library/Extensions/hp_Inkjet4_io_enabler.kext
- com.hp.print.hpio.Inkjet4.kext
/System/Library/Extensions/hp_Inkjet8_io_enabler.kext
- com.hp.print.hpio.inkjet8.kext
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/WD1394_64_109HPDriver.kext
- com.wdc.driver.1394.64.10.9
/System/Library/Extensions/WDUSB_64_109HPDriver.kext
- com.wdc.driver.USB.64.10.9
/Library/Extensions/hp_io_printerclassdriver_enabler.kext
- com.hp.hpio.hp-io-printerclassdriver-enabler
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
- com.citrix.citrixicaclientplugIn
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
- com.google.googletalkbrowserplugin
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/npg.plugin
- npg.graphon.com
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
- com.google.o1dbrowserplugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/SlingPlayer.plugin
- com.slingmedia.slingplayer.plugin.nspapi
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/FMDSysPrefPane.prefPane
- Citrix.FMDSysPrefPane
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
- com.westerndigital.quickview.prefpanel
/Library/PreferencePanes/Zimbra.prefPane
- com.zimbra.prefpanel
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Internet Plug-Ins/WebEx.plugin
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx64.plugin
- com.cisco_webex.plugin.gpc64
dylibs
/usr/lib/libaudioc.dylib
/usr/lib/libclipc.dylib
/usr/lib/libcs.dylib
/usr/lib/libdc.dylib
/usr/lib/libfilec.dylib
/usr/lib/libMonoPosixHelper.dylib
/usr/lib/libpbr.dylib
/usr/lib/libprintc.dylib
/usr/lib/libsc.dylib
/usr/lib/libSFFileMonitor.32.dylib
/usr/lib/libSFIPC.32.dylib
/usr/lib/libSFIPC.I.dylib
/usr/lib/libSFsqlite3.7.4.dylib
/usr/lib/libSFSyncEngine.I.dylib
/usr/lib/libupc.dylib
App extensions
it.bloop.airmail.beta10.Airmail-Today-Beta
it.bloop.airmail.beta10.Airmail-Composer-Beta
com.wunderkinder.wunderlistdesktop.sharingextension
com.wunderkinder.wunderlistdesktop.todayextension
com.readitlater.PocketMac.AddToPocketShareExtension
com.stylemac.instadesk.Photodesk-Feed
it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
/Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/opt/cisco/anyconnect/gui_keepalive</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.cisco.anyconnect.gui</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>--wait-apps</string>
<string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.AuthManager_Mac</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.AuthManager_Mac</string>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrix.ReceiverHelper</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.Beacons</key>
<true/>
<key>com.citrix.ServiceRecords</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.ServiceRecords</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
</array>
...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>9</integer>
<key>Minute</key>
<integer>57</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
http://www.apple.com/DTDs/PropertyList-1.0.dtd >
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.cisco.anyconnect.vpnagentd</string>
<key>ProgramArguments</key>
<array>
<string>/opt/cisco/anyconnect/bin/vpnagentd</string>
<string>-execv_instance</string>
</array>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>AbandonProcessGroup</key>
<true/>
<key>EnableTransactions</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.SmartwareDriveService</string>
<key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.WDSmartWareService</string>
<!-- <key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.download</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>download</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Downloads</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.update</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>update</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>StartInterval</key>
<integer>86400</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.microsoft.SyncServicesAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.zimbra.desktop</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
<string>start</string>
<string>-w</string>
</array>
-
How to make report with access 2010 from SharePoint Discussion lists 2013
HI,
I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
but instead it is shown as a separate entry in the database.
Anyone can please help?
SAN
Santhiya
SanthiyaHi Santhiya,
I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Ihave aproblem with imessege my country is not listed
guys ihave aproblem with imessege my country is not listed so when i add one of my friends phone number without the country code and he call me his name shows but in the imessege ican just his numbers without the name but when i add the country code when they call me the numbers shows but without the country code number but in the imessege the name shows plz help me with this dilema becouse alot of people here having the same problem and ithink becouse you havent but our country code in the face time and in imesseges by the way my country is kuwait and the same problem is saudia arabia
It seems that this problem is happening everywhere not just Arabian gulf companies! I've done some research and I've seen posts and blogs complaining about the same issue.
I've spoken to apple care representatives and was escalated to a supervisor who advised that apple is well swear of the issue and that they expect an update with in one to two weeks from now that hopefully will address the problem.
Mean while, I've tried restoring twice but I've used the same update that I've downloaded from iTunes. Sadly no good results. However I've read somewhere two points:
1. That if you down load the iOS 5 manually from a different source and use that to RESTORE your device to iOS 5 that this will resolve the issue.
2. Some friend tell me that apple made a statement to their customers to wait at least one week before downloading and updating to iOS 5
Im going to try the two approaches and see what happens.
I'll keep guys posted ;) -
Interactive list report with screns
hi! all
I have an Executable report which has a screen as an input screen not selection-screen, and a classical list display as its output for the entered data. in that output display i have an hotspot column which acts as a base for the secondary screen.
Now im not able to trigger the event +at line-selection + .
where to place this event to fetch the selected data from the first screen.
Thanks and Regards,
NagulanHere is my code, kindly say me where to locate the at line-selection.
TABLES: vbrk, vbrp.
DATA: wk_fkart LIKE vbrk-fkart,
wk_fkdat LIKE vbrk-fkdat,
it_vbrk LIKE vbrk OCCURS 0 WITH HEADER LINE,
wk_vbeln like vbrk-vbeln,
it_vbrp like vbrp occurs 0 with header line,
wk_vbrk like vbrk .
START-OF-SELECTION.
CALL SCREEN 5000.
top-of-page.
perform top_of_page.
*& Module STATUS_5000 OUTPUT
text
MODULE status_5000 OUTPUT.
SET PF-STATUS 'MLSTATUS'.
SET TITLEBAR '500'.
ENDMODULE. " STATUS_5000 OUTPUT
*& Module USER_COMMAND_5000 INPUT
text
MODULE user_command_5000 INPUT.
CASE sy-ucomm.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CLOSE'.
LEAVE PROGRAM.
WHEN 'BACK'.
SET SCREEN 0.
WHEN 'PRNT'.
LEAVE TO LIST-PROCESSING.
PERFORM print.
WHEN 'PRNV'.
LEAVE TO LIST-PROCESSING.
PERFORM get_data.
PERFORM display_data.
WHEN 'IDIS' .
leave to list-processing.
perform get_data.
perform idisplay_data.
ENDCASE.
ENDMODULE. " USER_COMMAND_5000 INPUT
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM get_data .
SELECT * FROM vbrk INTO TABLE it_vbrk
WHERE fkart = wk_fkart
AND fkdat = wk_fkdat.
IF sy-subrc <> 0.
MESSAGE e001(zsd) WITH 'NO RECORDS FOUND'.
ENDIF.
ENDFORM. " GET_DATA
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM display_data .
LOOP AT it_vbrk.
WRITE: /10 sy-vline,
11 it_vbrk-vbeln ,
20 sy-vline,
21 it_vbrk-fkart,
27 sy-vline,
28 it_vbrk-fkdat,
39 sy-vline,
40 it_vbrk-netwr,
63 sy-vline,
64 it_vbrk-fksto,
67 sy-vline.
at last.
ULINE : /10(58).
WRITE : /23 '<<<<< REPORT OVER >>>>>'.
endat.
ENDLOOP.
ENDFORM. " DISPLAY_DATA
*& Form PRINT
text
--> p1 text
<-- p2 text
FORM print .
DATA: pripar TYPE pri_params,
val TYPE c,
dest like PRI_PARAMS-PDEST,
ARCPAR LIKE ARC_PARAMS.
dest = 'ZLASER'.
PERFORM get_data.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
copies = 1
destination = DEST
layout = 'X_PAPER'
line_count = 65
line_size = 72
no_dialog = 'X'
report = sy-repid
priority = 2
IMPORTING
OUT_ARCHIVE_PARAMETERS = ARCPAR
out_parameters = pripar
valid = val
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4
IF val <> space AND sy-subrc = 0.
pripar-primm = 'X'.
NEW-PAGE PRINT ON
NEW-SECTION PARAMETERS pripar
ARCHIVE PARAMETERS ARCPAR
NO DIALOG.
PERFORM display_data.
ENDIF.
ENDFORM. " PRINT
*& Form TOP_OF_PAGE
text
--> p1 text
<-- p2 text
form TOP_OF_PAGE .
WRITE : /25 'LIST REPORT IN MODULE POOL',
65 sy-pagno,
/25 'FOR:', wk_fkart,
/25 'ON:', wk_fkdat.
SKIP 2.
ULINE: /10(58).
WRITE: /10 sy-vline,
11 'Bill.no',
20 sy-vline,
21 'Type',
27 sy-vline,
28 'Bill date',
39 sy-vline,
40 'Bill Value',
63 sy-vline,
64 'canc',
67 sy-vline.
ULINE : /10(58).
endform. " TOP_OF_PAGE
*& Form IDISPLAY_DATA
text
--> p1 text
<-- p2 text
form IDISPLAY_DATA .
LOOP AT it_vbrk.
WRITE: /10 sy-vline,
11 it_vbrk-vbeln hotspot on,
20 sy-vline,
21 it_vbrk-fkart,
27 sy-vline,
28 it_vbrk-fkdat,
39 sy-vline,
40 it_vbrk-netwr,
63 sy-vline,
64 it_vbrk-fksto,
67 sy-vline.
at last.
ULINE : /10(58).
WRITE : /23 '<<<<< REPORT OVER >>>>>'.
endat.
ENDLOOP.
endform. " IDISPLAY_DATA
*& Form GET_DATA_VBRP
text
--> p1 text
<-- p2 text
form GET_DATA_VBRP .
SELECT * FROM vbrp into table it_vbrp
WHERE vbeln = wk_vbeln.
endform. " GET_DATA_VBRP
*& Form DISPLAY_DATA_VBRP
text
--> p1 text
<-- p2 text
form DISPLAY_DATA_VBRP .
loop at it_vbrp.
write: /10 it_vbrp-vbeln,
20 it_vbrp-posnr,
25 it_vbrp-matnr,
35 it_vbrp-arktx,
55 it_vbrp-fkimg,
65 it_vbrp-netwr,
75 it_vbrp-aubel,
85 it_vbrp-aupos.
endloop.
endform. " DISPLAY_DATA_VBRP
Thanks and Regads,
Nagulan -
Lumira on HCP or Cloud Lumira server with backend as HANA DB
Hi
I have developed Lumira stories in desktop version and deployed in trial version of Cloud Lumira server.
But not able to connect HANA DB as backend to create stories in Cloud Lumira.
is there any way to create Cloud Lumira stories with backend as HANA DB ? i'm able to achieve this in desktop version and again not able to publish to Cloud Lumira.
i tried with Hana Cloud Platform trial account.
But i dont find Lumira Server on HCP. Only Cloud lumira is available where we are not able to connect with HANA DB.
Is Lumira is available on HCP ? or how to connect HANA DB with Cloud lumira server?
I'm new to Lumira developments, Any help would be appreciable.
Thanks & Regards
Yokesvaran KumarasamyI don't think you will be able to connect to those with trial accounts; those are typically limited in data sources
See Figure 15 here BI in the Cloud - ASUG Webcast Summary - Lumira Server on HCP is planned
Maybe you are looking for
-
Adobe AIR Alarm Services ANE for IOS and Android
I want to make an Adobe AIR app for android and ios platforms and i should use alarm services of these platforms (ios & android) for several scheduled times in a day when app is not running. Could you suggest free or commercial ANE for this operation
-
Flash Player - Disable Hardware Acceleration - Apple TV-Mac OS 10.4.7/Firefox
Hello all, I have been going down a fun path getting my 1st Generation Apple TV (160 GB HD) to run Hulu natively (without PlayOn restreaming). After fun times getting Firefox and Flash Player working, I blasted through setting up Hulu Widget to keep
-
How we can run Oracle Batch Manager in Oracle Sales Analyzer
Hi, Please guide me how we can run Oracle Batch Manager in Oracle Sales Analyser. Best Regards,
-
We need more ePublishing support!!!!
I'm still trying to figure out what works in ePub as opposed to print documents. Unfortunately the documentation doesn't bother to tell you what does and doesn't work. The truth seems to be very little transfers. What we need. We need proper format t
-
I'm nearing the end of a proof of concept project, and a teammate and I have been working on two separate custom workflows both which are required to run once a week continuously after start up. After dealing with the known issue with delays, my part