GTX 460 display driver not working in AE CS6
Hi everyone im currently having problems with After Effects, My GTX 460 is currently undetected by AE CS6 when i check out the gpu information it says (GPU not available - incompatible device or display driver)
I don't see how i am getting this problem as i have the latest drivers and the the gtx 460 has 336 cuda cores therefore it should be compatible with After Effects Should it not ???
Any help will be much appreciated unless it has to do with drivers, believe me it's not the drivers -.-
Same old, same old: What's not listed on the product pages is not officially supported for the respective features and the GTX 460 is not listed as supporting Raytrace 3D. It should support all conventional OpenGL stuff and fast previews without issues, though, so update your graphics driver or try a different version and configure it properly so AE can detect it.
Mylenium
Similar Messages
-
Upgrade to windows 10, display driver not work
the issue is video card has no working driver detect. I can't get error code ,because teh screen is not display any thing.I am sure the computer is boot up, as it can be access by teamviewer and show a 640x480 screen. currently , I am using miscrosoft default display driver . instead of intel and AMD driver. to show 1024x168 screen , at least I can see someting now... and the fan is screaming .. my product type is HP Pavilion dv4-3126tx QG429PA#AB2 display card is Intel HD Graphics 3000 and AMD radeon 6600m and 6800m (not sure excatly, may be 6750M) I am running windows 10 64bit much thanks
all solution I have tried , but not work not working driver include - the windows update give a driver from 2015 july 15 - Radeon (TM) HD 6750M ver 9.0.0.0 2012/8/15 - AMD Radeon 6600M and 6700M series ver 15.200.1046.2 2015/7/15- AMD 12.10 DriverVer=09/27/2012, 9.002.0.0000- AMD 15.6 DriverVer=06/19/2015, 14.502.1014.1001- AMD 15.7 DriverVer=07/15/2015, 15.200.1062.1002- intel(R) HD Graphics 3000 ver: 9.17.10.4101 2015/1/30- intel(R) HD Graphics 3000 ver: 9.17.10.4229 2015/5/26- intel(R) HD Graphics 3000 ver: 9.17.10.4229 2015/5/27 do I need to install both intel graphic deriver seperatly ? the old win7 and win8 driver tell me , not install intel graphic driver , I must instal AMD driver which include intel already.......
-
Latest display driver not working on Satellite A660-11M
Hi all,
I'm trying to install the latest display driver downloaded from toshiba drivers section.
When i have downloaded them i started the installation but it doesn't run. I have tryed to instal "as administrator" i have tryed to install without the user account control but nothing to do.
I have tryed to install lauching every single file like "tinstallwb" "tinstall" and "setup.exe". The last one says that it can't recognize the hardware.
I have alway installed toshiba driver only. I have windows 764 bit home premium.
P.S.
I have already installed the new version of the bios(1.8)
Could anyone help me?
(sorry for my english but i'm italian)I Installed yesterday latest drivers from Nvidia official page, and they work perfectly on the A660-11M, brightness and all controls, and now the Mercury Hardware engine in Adobe Premiere CS5 is working perfect!!! .. .version 260.99 released yesterday:
http://www.nvidia.com/object/notebook-win7-winvista-64bit-260.99-whql-driver.html
RELEASE HIGHLIGHTS :
This is the second WHQL release from the Release 260 family of drivers. You can read about the major new features and performance improvements in the Release 260 family of drivers here.
This driver supports the following NVIDIA notebook GPUs (please refer to the Products Supported tab for exceptions):
ION notebook GPUs.
GeForce 8M, 9M, 100M, 200M, 300M-series, and 400M notebook GPUs.
Quadro 5000M
Quadro NVS-series notebook GPUs (only those that support DirectX 10 or higher).
Quadro FX-series notebook GPUs (only those that support DirectX 10 or higher).
New in Release 260.99
Increases performance vs. v260.89 drivers in the following PC games: Civilization V (SLI), Fallout 3, Final Fantasy XIV, and Formula 1 Racing (DX11).
Adds SLI profiles for the following PC games:
Need for Speed: Hot Pursuit
Star Wars: The Force Unleashed II
Fallout: New Vegas
Improves compatibility for Fallout 3: New Vegas with antialiasing enabled.
Improves Alt-Tab compatibility for several PC games.
Additional Information
Installs HD Audio driver to version 1.1.9.0.
Includes PhysX System Software to version 9.10.0514.
Supports the new GPU-accelerated features in Adobe CS5.
Supports GPU-acceleration for smoother online HD videos with Adobe Flash 10.1. Learn more here.
Supports the new version of MotionDSP's video enhancement software, vReveal, which adds support for HD output. NVIDIA customers can download a free version of vReveal that supports up to SD output here.
Supports DirectCompute with Windows 7 and GeForce 8-series and later GPUs.
Supports OpenCL 1.0 (Open Computing Language) for all GeForce 8-series and later GPUs.
Supports OpenGL 3.3 for GeForce 8-series and later GPUs.
Supports OpenGL 4.1 for GeForce 400 series GPUs.
Supports single GPU and NVIDIA SLI technology on DirectX 9, DirectX 10, DirectX 11, and OpenGL, including 3-way SLI, Quad SLI, and SLI support on SLI-certified Intel X58-based motherboards.
Supports GPU overclocking and temperature monitoring by installing NVIDIA System Tools software.
Users without US English operating systems can select their language and download the International driver here. -
Sat Pro A60: ati2dvag display driver not working properly
help.... i know very little about computer and need to know what, how and where i can get a solution to this problem. It occurs more and more frequently now, it messes up the display and i have to restart only for it to happen again. i tried to down load bios 1.90 and will hope it works like some similar ports have said but what else can i do? any help from anyone would be so great
[Edited by: admin on 19-Aug-05 23:28]Hi
Well, you can try to recover your system. If the problem remains so the best way is to contact the Toshiba ASP. You can find the right service partner on this site:
http://eu.computers.toshiba-europe.com
Bye -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Mac Mini + A1038 Cinema Display does not work
Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
Audio driver not working in hp 2000 - 2116tu laptop
Audio driver not working in hp 2000 - 2116tu laptop
Driver installed : sp57716.exe
From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
OS : Windows 7 Pro x64
Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.Hi architsomani,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
i have hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action till now .why u people do like this .i want explation and just change my dvd drive that's all.
tcrite,
Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso -
My thunderbolt display is not working with my MBP retina 13''
Hi,
I just received both a new macbook pro retina 13'' and a thunderbolt display. Everything was working properly yesterday but today, I have no clue why, the thunderbolt display is not working anymore.
. the power supplier for my laptop given by the thunderbolt display is still working;
. when I don't connect my laptop through the thunderbolt connection, I can use the usb sockets as power supplier , for my phone, for instance;
. as soon as I plug the thunderbolt cable, the usb socket is not feeding any more my phone, whereas the screen is not displaying anything.
. If I take a look in the system report, in the thunderbolt tab, there is "no device connected"...
I restarted plenty of time my laptop, took care to reinitialise the SMC as well as the PRAM, and nothing changed. I also disconnected the thunderbolt display, waited few minutes (and more), but nothing changed, again the black screen.
Has somebody an idea?
Thankswhich model air do you have?
try both a pram and smc reset
plug the monitor into a different electrical outlet and a different port on your Mac (if you have multiple tb ports) -
I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help
Reset the NVRAM/PRAM and Reset the SMC, then try again.
-
Amber update but map and bere drive not work
After amber update my here map and here drive not work just open the app but not open and close automatically
Same thing here. I have tried all things and have a similar issue
http://discussions.nokia.com/t5/HERE-Location-based-services/Settings-gt-Applications-does-not-have-...
NOKIA NEED HELP HERE !! -
MacBook Pro Late 2011 : Optical Disk Drive not working?
MacBook Pro Late 2011 : Optical Disk Drive not working?
When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
I have resetted SMC and PRAM; no chages.
Don't know what to do. Please help.
Thank you.Clean the heads.
check to see if it is under warranty.
buy external DVD/CD rw -
HP deskjet D2300 series driver not working in windows 7
This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
My problem remains unsolved.Hi dvh,
Welcome to the HP Forums!
I see that your HP Deskjet D2300 series driver not working in windows 7.
Do you see any error messages with the installer? Or does it just close out and doesn't install?
In the meantime, please try using our HP Printer Install Wizard for Windows.
Hope to hear back from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...
Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.
Maybe you are looking for
-
I have some photo's on an ipad 2 that were put on there through syncing on iTunes, I would like them to be placed on my new ipad. I understand that I can't use iCloud ? Just to point out u no longer own the desk top pc from where I synced the origi
-
Creation of Variable with single values in BPS
Dear All, I have a very basic requirement in creating variables that would accept single values from the user in BPS. Could anyone pls provide me the steps in doing so? I am able to create and use varibles with value ranges but could not find the opt
-
HELP!!! This is driving me CRAZY! I am trying to export my sequence to an FLV at 720x480. You would think this wouldn't be hard since my source video is already 720x480. When I click Export and it goes into the Export Settings, I click "FLV - Same
-
How to remove authorizations for a particular transaction
Hi, I have an SAP_ALL authorisation for a user. I need to remove authorization for a particular transaction (FK01) for this particular user. How do i make that.
-
When I try to install the installler says my hard drive is the time machine backup disk and will not install. This is not the case. I have a seperate drive for backup and time machine is configured properly. How can