GTX 480's on sale at Dell for $365 (thru June 10th)

Folks,
Well, maybe I can be of help myself. I'm new 'round here and hope my listing a hardware deal in this forum isn't a faux pas. I wanted as many PPro CS5 users as possible to see it here in this forum. For all I know, listing deals anywhere on this Adobe site is a no-no - so, sorry if I'm wrong in this!
I just bought a GTX 480 for $364 plus tax at Dell.... EVGA model 015-P3-1480-AR.
The sale has not fully completed as I type this, but shows as being far enough along in my PayPal account to have me think it is legit, plus I've gotten a confirmation email from Dell. All that might trip it up now is Dell being out-of-stock come shipping time.
I do not have an account or other special treatment from Dell. I think anyone can get in on this.
A coupon code for 30% off computer accessories makes it happen. The code is supposed to be good through June 10th. I doubt the stock will last that long. There are a number of exclusions, including monitors, but the code still covers quite a bit.
Code: HHM4QNZ3303N1Z
I found this info at "Slickdeals.net". Go to their website and hunt down the deal through a search. I'd link to it, but can't figure out how and wanted to get this up fast.
Good luck!
Joel E.

That's a very good price, considering Newegg is about $500
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Descripti on=gtx+480

Similar Messages

PC for prem CS5? GTX 480, which brand? Shuttle?

Hi
I'm trying to decide for a graphics card and PX-box for premiere CS5.
I'm considering bying the GTX 480
There are some different makers of that card:
MSI, Gainward, ASUS, EVGA
Any suggestions why I should select one manufacturer before the other?
I see EVGA has some superclocked versions.... any thoughts about those?
I'm also considering buying the Shuttle SX58J3 SFF computer, support up to 16GB memory, LGA1366 Socket, Intel X58 Express, up to 4 SATA-300 disks.
Reason for this choice is that I want to be able to take the PC with me without to much hassle.
This comes standard with a 500W PS, but I belive I should be able to put in another more powerful PS... e.g. a 600W one.
Or is this a bad choice?
I7 CPU:
2.8 GHz or 3.2 GHz ?
Any suggestions on which CPU and number of cores, will I notice that much difference between 2.8 and 3.2?
I'm to edit footage from Canon 5D MK II.

As for your original post, Shuttle is out of the question - buy a nice asus MB - they will all be pretty much the same for the i7.
I took an HP 180 (I7 975 8 thread quad duo core proc, put 24 GB of ram in it (at hp's expense) then yanked out their GTX-200 that came stock and put a GTX-480 from EVGA.
The GTX480 uses ALOT of power. When I say ALOT I mean 3 ea SLI cables - not one or two like most cards. So my 4xsli corsair 850W ps BARELY got ONE GTX 480 running in this system, but it is running very stable, and premiere pro plus media converter just rip through avchd like nobody's business (my other PC estimated a week to transcode a couple of hours of avchd video from a canon hfs-10 camera shot at 24mbps 1080x1920. It was a quad core 2.83 Ghz system with an SLI card) - I just gave my new machine that task, the lights dimmed in the room, and in 30 min it was finished.
Cramming all the nice wire loomed power cables from the 850W p/s wasn't easy but they did finally fit and all the covers went on, plus I have room internally for a second 2TB hitachi drive, and 2 ea external (oh thank you) SATA plugs.
I just got this card in here and fired the puppy up, so now its time to make sure all the drivers are proper, but it seems to be. I think the lesson I learned after having to rip out HP's little chinese power supply is GO BIG on the power supply - and if you are even thinking of SLI, go TWICE as big. The 850W supply runs one GTX480 card, one disc drive, and an i7/975+24GB ram and a video recorder card. The air comming out the back is HOT - as in heater hot.
The second lesson I learned is get a big case! This tiny HP case is cute and all that but it lacks the room inside for much internal hardware. It's a midsize tower case - If I were doing it from scratch I'd buy a fullsize tower case.
So why didn't I? I got a great deal on the 24GB of ram from HP and the 1GHZ pricessor. I paid less for a maxed out system than I could buy the ram and the processor for due to discounts. Unfortunately HP never thought anyone would stuff a corsair 850 and GTX 480 inside where their itty bitty stuff once was.
If you have a big enough case (floor standing full height) and a big enough power supply (6 SLI) 1500 W you could probably make a decent SLI system with 2 GTX480 pcbs (you realize thats 1024 cuda cores, ,right?)
Think Big and you won't be using drive bays to stuff power cables into so you can get the lid on the system. As others have said, asus, bfg, evga all make good equipment. I found a sweet deal on the evga which is the only reason I went that direction. Sweet deals change in one week, so be sure to buy what you want when the price dips. If you are planning a real SLI system, buy BOTH cards form the same MFGR at the same time
PSS

Single Del. for multiple sales order:

Dear all,
i wanna do a single del. for multiple sales order ,So plz provide me the exact flow to do it.
Also provide what conditions are required to do the same.
Waiting for ur reply,
Thanks & Regards,
Olet malla..

Hi,
It is very much possible in SAP.
Goto the T code VL10A and enter your Shipping point and Execute.
This will give you the list of Sales orders which are ready for delivery.
Select the sales orders for which you want to create single delivery and click on "Back Ground".
This will create the delivery. PGI you can do it VL02N.
Requirement for combining Sales order are: Ship to party should be same, Route should be same, Delivery date should be same, Shipping point should be same, plant should be same.
Regards,
Mullairaja

Very disappointed with replacement quality for my MSI GTX 480 Lightning

Hello,
Here is my original thread
https://forum-en.msi.com/index.php?topic=154517.0
I sent my MSI GTX 480 Lightning last week and I received a RMA replacement today with different serial #.
I did noticed that RMA dept. replaced the TIM before they shipped. I tried them with default clock to test the stability and it was very unstable.
My fan would go up to 100% and it would give me close to 90c temperature. My previous gtx 480 lightning would never go above mid 70c with 100% fan.
I set everything to default and played my favorites games and games was chappy like FPS would go up and down randomly. I tried Nvidia driver 285.62 and 290.36 beta, but both would behave same.
I even tried with other bio switch, but samething. I also noticed that new serial # was also manufactured in May 2011 (My previous gtx 480 lightning was also manufactured in May 2011) and they both comes with 701mhz core clock instead of 750mhz core clock. I am hugely disappointed. I doubt RMA dept tested this card before they sent out. Do I need to pay a shipping again for a RMA?
I currently have two MSI video cards (gtx 480 lightning and R6850 cyclone PE/OC), but they both having problem and I am forced to use ati 5770 in 2560 x 1600 resolutions :(
My spec:
i7 920 D0 4Ghz
Asus Rampage III Gene (latest bio)
MSI gtx 480 lightning + MSI R6850 Cyclone PE/OC + sapphire 5770
Corsair F60 SSD, Crucial M4 64 SSD, Samsung 1TB 7200rpm
Asus Xonar ST PCI sound card
Window 7 Ultimate 64bit
Seasonic X750 Gold PSU

I requested another RMA and I really hope I get a working one back.
I really don't want to deal with 3rd RMA and shpping cost. I know bad replacement can happen to any other company, so I am going to keep buying more MSI GPUs.

What are the advantages of the new Quadro 4000 over the GTX 480 for Photoshop?

I am a photoshop user trying to decide between the new Quadro 4000 and the GTX 480.
We are building a machine around an i7 970 processor with 12GB ram.
I've read here and other places that the GTX specs generally out do the Quadro card.
But I also have read that there can be disadvantages to using a gamer card for editing graphics.
I am trying to understand why the Quadro card is suggested for photoshop users by Nvidia. Why do they have this line of card?
I do notice the Quadro card has two of the newer Display Ports.
I want to make sure I can:
Run two monitors each with its own, separate, ICC profile.
Maintain a 10 bit color workflow
Can I do these things with with either card? If I go for the GTX card, how gamer-centric is the driver software versus the driver software that comes with the Quadro 4000?
Thank you,
Plum Parlor

The Geforce cards are faster than the current Quadro cards right now. If you do not have an application that the Quadro has a plugin for then the Geforce cards are normally the better choice and far less expensive. In your case the question revolves around the 10Bit color. Both the Displayport and HDMi 1.3 standard or newer support 10bit color. The problem is finding the HDMI Screen that supports the 1.3 standard and Deep color. That requires more research than the Displayport option. Obviously the new HP 30 inch supports 10bit color with the displayport. It really boils down to whether it's worth your time to spend the extra money for the Quadro versus researching a HDMI 1.3 Display with Deep Color support.
Eric
ADK

How can we identify what are all user exits are there for sales orders,deli

Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel v

Hi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you

Is it possible to put the new nVidia GTX 480 in the Mac Pro

I'm planning on creating the ultimate gaming machine, but also want the best operating system. So I have decided that my next computer will be the Mac Pro and will have the new nVidia GTX 480 (if it works). The Windows partition would be used for heavy gaming with DX 11 and PhysX technology. While on the OSX partition I could use the greatest operating system, to do general things like Movie Making, Picture Editing, Web Surfing, Emailing etc.
So all in all, is it possible to install a GTX 480 on OSX? I know it'll work with the windows partition, but not sure about OSX. I'm also unsure about the hardware side of things, but that's why I'm asking!
Any help would be greatly appreciated.
Thanks again,
Mike

If you don't need dual processor, PC with 980X Gulftown makes sense.
Forget over clocking a Mac, but if you need dual processor, the Mac Pro makes sense but expect to pay. Otherwise, take a look at
EVGA Classified SR-2 (Super Record 2) 270-WS-W555-A1
http://www.evga.com/products/prodlist.asp?switch=5
Apple has not had good Nvidia drivers. And right now there are two 6-pin, and you need 6 + 8 and stick with Windows 7 and ability to do SLI. I laugh when people talk about "windoz" (rude) being somehow less or 'inferior' having seen the best - and worst - of both (never got caught up in 95/98/NT/XP so spoiled by only knowing Vista/7). I still think 10.6 hasn't quite caught up to 7 in areas that really matter, like threading, multicore, efficient use of memory.
Forget using more than one, Apple likes graphic cards that are low power, low end, and only supporting one high end card.
The GTX 480 @ $499, and if Apple offered it, it would be $549 or more (Apple 'tax' for smaller market and having to do their own drivers). And it would be much later before optimized drivers (maybe next year this time at best).
While you can go water and add custom fans and cooling, the Mac is much more of a "closed" box in many ways beyond RAM and hard drives and +very limited+ selection of graphics.
That really is my honest assessment.
The place where Mac Pro is easier, you can install 32-64GB RAM without trouble and not have to worry about compatibility or PSU issues. I'm always surprised by all the memory testing and supported and problems PC owners go through (I don't think Cruical Ballistix gets enough credit).
DX11 will still take time. Adobe showed how GPGPU/CUDA could benefit, but Apple and Adobe apps have always tended to favor ATI which is just beginning to get into OpenCL technology ... and the 5000 series may find Nvidia Fermi, while it took longer, runs hot and power requirement, could be better poised down the road too.
A single socket Mac Pro 3.3GHz or even stock (same as 920) will do the job you want.
Apple Mac Pro Specials (refurb dept)
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
Are a good selection and place to shop. My the time Gulftown + GTX480 and all the rest is out and ready could be more than a few months.

Over volted gtx 480 using MSI afterburner now it wont boot.

I have a gtx 480 that I set to 1213 volts under water cooling.I was under the impression that with low WC temps I would be fine. I was stupid enough to run furmark, ran fine for about 3 minutes then computer shut down. I think the voltage is hard locked into the card I have tried booting with a second card (SLI Mobo) but the entire pc simply wont boot if I have my 2 pcie power connectors plugged in. Fan spins up and pc posts if no power connectors are connected but even with a second card as primary windows does not detect the card. I have tried using a second PSU to power the card while primary PSU powers mainboard and PCIE bus but I get the same issue. Computer refuses to boot. Lights come on for about half and second then I need to unplug the power cable and switch off psu to get any sort of response from my pc. I wish I didn't set the voltage to 1.2 ect, I know this is my own fault, but is there anything I can do on my own end to fix this?

I'm pretty sure aware afterburner only changes the cards values when running the profile in Windows so it should have reset on reboot.
Can you try the card in another machine to determine if it's damaged?
Clear the motherboard CMOS too. >>Clear CMOS Guide<<

Minimal performace improvement with GTX 480

Just wanted to see if anyone was getting reasonable mercury acceleration with the nvidia GTX 480 and hack. I notice that i get yellow bars even before i apply any effects to a single video layer (mainly working with AVCHD or video from a Canon 5d mkii). Any effect automatically turns the bar red. Maybe the codec is just too hard for CS5 to work with but i was hoping with a high-end machine I would be able to do more.
I have the updated nvidia driver 257.21 and followed the hack instructions. The strange thing was that under step 5 of the hack instructions "under "Manage 3D Settings", Click "Add" and browse to your Premiere CS5 install directory and select the executable file: "Adobe Premiere Pro.exe"", It only had premiere CS4 listed. In any case, it allowed me to activate mercury in the CS5 preferences. I remember reading that most people were getting 3 layers with effects (and one person even claimed 11 layers.) I wondering if i am missing something. Here are my system specs.
Windows 7 64 bits
CS5 (full version no previous versions installed)
i7-980x (oc'd to 3.9)
GTX 480
12g 1600 ram
Drives:
    raid 0 SSD boot/program
    raid 0 scratch
    raid 3 (4 disk) data/video disks
    single output disk.

Hi, I am also usung the gtx 480 , and I have been getting very good results. it all depends on other factors that could be causing a issue.
as Harm suggested try the benchmark test.
Baz

MPE GPU Acceleration with a GTX 480

Hi,
I added the line "GeForce GTX 480" in the cuda_supported_cards.txt file. MPE became available upon doing so. However rendering is faster in software than using the GPU. Did I miss something?

I installed the GTX 480, added it to the text file,. Now I have
MPE GPPU available as well as MPE software available. My tests show no difference. The GPU is only used about 7% and my CPU's are still maxed out.
Dell XPS 710
Property Value
Summary
Number of Logical Processors 4
Number of Physical Processors 1
CPU #1 Intel Core 2 Extreme QX6700
CPU Name Intel(R) Core(TM)2 Quad CPU @ 2.66GHz
CPU Code Name Kentsfield
Vendor GenuineIntel
Number of Bits 64
Instruction Set MMX, SSE, SSE2, SSE3, SSSE3, ET64, XD, VMX, EST
Platform Name Socket 775 LGA
Revision B3
Technology 65 nm
Original Clock 2666 MHz
Original System Clock 266 MHz
Original Multiplier 10.1
CPU Clock 2660 MHz
System Clock 265.4 MHz
FSB 1061.4 MHz
Number of Cores 4
Core #1
Speed 1592.2 MHz
Multiplier 6.0
Core #2
Speed 1592.2 MHz
Multiplier 6.0
Core #3
Speed 1592.2 MHz
Multiplier 6.0
Core #4
Speed 1592.2 MHz
Multiplier 6.0
Virtual Technology Supported Yes
Hyper Threading Supported No
Cache
L1 Data Cache 4 x 32 KBytes
L1 Instructions Cache 4 x 32 KBytes
L2 Cache 2 x 4096 KBytes
Geoffrey

GTX 480

Guys can somebody confirm if I am right what I am seeing I'm 11 Layers and still going with my Geforce Gtx 480 with effects applied to all layers.
I am a newbie.

I'ts nice of you to take the time out to respond to me Denise, Just to know you were the person who first gave us a glimpse of this wonderful techknowlogy, i salute you sir. now when mensioned 11 layer and counting i actually stoped at the 11th dont know if it past there, Itried it before before the update and it gave me 3 layers with effects that was 10 mins before I discover the udates so am suprise by the result that why am asking for confirmation.

GTX 480 will not be supported ?

I built my PC for Adobe Premiere CS5 with GTX 480. Now I'm very worry about this.Does anyone know anything about this ?

/points finger at Marketing door
Eric
ADK

MOVED: MSI TWIN FROZR II GTX 480

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=146789.0

@sylarnbg
Bumping is now allowed, >>Please read and comply with the Forum Rules.<<
Quote from: sylarnbg on 15-March-11, 19:46:37
thanks for the answer. yes i know it's great that i recieved this version
Edit: It hast the standard clock speeds, so is it reference design, which a normal gtx 480 watercooler would fit?
you have to check compatibility with cooler makers.
also installing 3th party cooler will void your warranty

MPE layer bug(s) - GTX 480 and CS5 trial

Hi All,
Due to some strange MPE-PPro behaviour, I am now having some last minute doubts about whether to jump up to a full version of the production suite - or perhaps wait for a .1 patch.
Please advise if any of you can spot where the cause of these problems might lie...
These are fairly easy-to-repeat MPE-related bugs in the trial version of PPro CS5, so far I have found issues both with scaling and when duplicating clips to new layers.
Current hardware is as follows (will be looking for a new i7-920/X58 mobo combo if CS5 is purchased)
Mobo- Asus Striker Extreme
CPU - QX6700 C2Q@ 2.66Hz
RAM 4G
Win7 Pro x64
So for testing purposes, I have "enabled" MPE using a GTX 480 and all seems fine for basic cuts-only or opacity fades on multiple layers. The bugs I have found seem to be related to adding more than 2 effects (even on just a few short clips...)
Scenario 1:
1) DV clip on layer 1, second DV clip on layer 2 scaled to 25% and positioned top left corner. Yellow line - playback behaviour is OK so far.
2) With MPE enabled, if I add some fast CC to layer 2 clip then the footage plays back as though scaling is reset to 100% (although the slider still shows 25%)
3) Switch from MPE to SW preview and the clip correctly returns to 25% scale (still with CC applied). Switch back and the scaling is again lost.
Scenario 2:
1) DVCPRO 1080 25p clip on layer 1, duplicated to layer 2 with a gaussian blur and 15% opacity (creates a basic glow effect). Yellow line - playback behaviour is OK so far. Repeat for a second clip on to layers 3&4 with a simple opacity fade-up at start on each, overlaying the last few secs of 1&2 for the length of the fade.
2) With MPE enabled, layers 3&4 only show when the layer 1&2 clip has reached the out point, ie the fade up on layer3&4 is "ignored" and the second clip only cuts in when the first clip has reached the out point. All the time with a Yellow line.
3) Switch from MPE to SW preview and everything works as it should (after preview render is generated of course).
So my questions are, can anyone with a GTX 285 or (certified) Quadro repeat either of these bugs? Am I better to wait until the GTX 480 is officially certified in a few months (possibly including a patch) or is there another cause elsewhere in my current hardware?
MPE is really nice (in theory at least) but it worries me that it fails to calculate opacity occlusion and scaling correctly for such relatively simple sequences.
Any suggestions/opinions/comments welcome!
Cheers,
Dave.
Broader Pictures

Hi Harm,
I've created a fresh test project and recreated a timeline similar to scenaio 1 (sticking to DV to rule out demanding codec issues)...
Here's the OK intial version of the timeline:
LAYER4: PIP clip scaled to 25% pos. top left, no other effects just an opacity fade-in-out
LAYER3: PIP clip scaled to 25% pos. top right, no other effects just an opacity fade-in-out
LAYER2: PIP clip scaled to 25% pos. bottom right, no other effects just an opacity fade-in-out
LAYER1: Simple clip no scaling full screen (backdrop), fast cc effect w/ default values
Preview bar is yellow and play back is fine with MPE on.
THEN, if I add any other MPE-enabled effect to any layer, the preview goes red and the top-most layer disappears from the preview monitor!
The rendered preview also omits layer 4, as soon as I turn off MPE, the timeline returns to red and layer 4 pops right back on the monitor!
Is this just a trial limitation of the MPE module, rather than restrict the 'extra' effect/layer to render-only you lose it altogether? This just seems a bit of a strange way to promote such an important feature, it certainly hasn't helped me decide on if/when to purchase, or perhaps it has?
Any more thoughts?
Thanks,
Dave.

Sales document report for all open documents

hi i need the code for sales document report for all open documents is sd
... can anyone help me out.
thanks in advance

Try transaction VA05. In that choose "Open Orders" along with other selection criteria.
If you want the Open sales order qty in output and its not displayed, do the following.
Sales -> System modification -> create new fields ( without condition technique) -> New fields for lists.
You can change V05TZZMO and structure VBMTVZ from there or use SE38 / SE11.
For both you'll need an object registration in OSS.
Hope this helps.
Thanks,
Balaji

GTX 480's on sale at Dell for $365 (thru June 10th)

Similar Messages

Maybe you are looking for