GTX 570 Twin FrozR II cold boot noise

I got a MSI GeForce GTX 570 Twin FrozR II OC graphics card. Recently I noticed that one of the fans is making a rattling noise on cold boots. The noise lasts for about 30-40 seconds and then goes away.
The card is just under 3 months old. Should I RMA it? Does MSI do Advanced RMA?

you can do query with msi about it here:
http://support.msi.com/

Similar Messages

Geforce GTX 570 Twin Frozr III PE/OC and BSOD

Hi,
I have an MSI Geforce GTX 570 Twin Frozr III PE/OC which appears to be causing system instability (graphical corruption upon boot i.e before windows), and BSOD. It typically occurs from a cold boot resulting in BSOD after the Windows logo. This will occur 2-3 times. The system then runs stably.
I have tracked this problem down to this card when running at x16 mode in my primary PCIe slot (slot 2, x16_1) on my motherboard. It does not occur if the card is in slot 5 (x16_2) where it only runs at x8 speed (2.5Gb/s rather than 5Gb/s). This does not occur if I place a borrowed Geforce GTX 260 in the primary PCIe slot (it runs at x16 fine and causes no such system instability).
I have tried out various mobo BIOS updates, checked all my system files, updated (and rolled back) my NVIDIA drivers, and checked my memory for errors with Memtest 86+. I cannot find any updates to my video card BIOS.
Can I assume the card is faulty, or does anyone have any other possible solutions?
Spec is:
Windows 7 64-bit
Intel I5-2500K
Asus P8Z68V-Gen 3 mobo
8Gb Corsair DDR3 1800 mem
MSI Geforce GTX Twin Frozr III PE/OC
Cheers!

Quote
Its a Corsair 750TX V2 (750 watt). I am also running 1 SSD, 2 hard drives and a blue-ray optical drive. You don't think its too much for the PSU do you?
The PSU its plenty enough
Quote
No I haven't tried it on another computer and I don't think its very likely I'll get the chance.
there is not much options then, except to RMA the card and to hope the problem to be there.
[else the problem will remain]

GTX 570 Twin Frozr II OC Fan

The fan on my GTX 570 Twin Frozr II OC is locked in between 40%-85%. I would like to have the full range of 30%-100%. I believe I have the latest bios. I don't want to have follow the process listed by msi for updating my bios, which involves downloading one program so you can configure something so you can use another program......
EVGA has a simple executable file which unlocks the fan speeds. Does MSI have something similar?

Quote from: dieukroman on 13-March-11, 21:56:02
i can feel it , i pass my finger near the fan
then it could be your illusion/imagination...
what hapends if you force/apply max FAN speed from AB?
Does the FAN2 will speed up or keep the same state?
And FAN1 will speedup too?
Apply max FAN RPM from AB, then observe and compare both FAN's again

GTX 570 Twin Frozr III POWER Edition

Hey guys,
i just got the GTX 570 Twin Frozr III POWER Edition and i love the card but it seems to run quite loud at fan speed above 48% so i made a custom fan control in afterburner
and the card runs at 71C - 75C under full load in games(crysis2, witcher 2), are those temperatures too high? if not what is the max safe temp i should be running at?
thank you =]

Quote from: Henry on 31-July-11, 05:13:04
Those temps are normal under a heavy load, nothing at all to worry about.
some people said i can lower the fan speed and just let the card run at 80C, so my last question is:
Is 80C under load an acceptable temperature to run this card at for let's say 4 non-stop gaming hours a day?
and thanks for reply ^^

MSI GTX 570 Twin Frozr III POWER Edition OC - Dual monitors IDLE higher temp

I have MSI GTX 570 Twin Frozr III POWER Edition OC, when I attached second monitor to this card temperature in IDLE mode on this card goes higher from ~38C with one monitor to around ~45-6C with second.
Card with attached two monitors do not goes in 2D mode, I readed its a nvidia bug and I should upgdate my BIOS.
In desktop IDLE mode card with attached one monitor
http://img401.imageshack.us/img401/3726/19936167.gif
In desktop IDLE mode card with attached two monitors
http://img851.imageshack.us/img851/1857/27227099.gif
My BIOS version 70.10.27.00.01
Is it available any newer bios for this card ?

Quote from: PeterMac on 10-May-12, 01:13:08
From 50MHz on GPU at idle desktop with single monitor to 770MHz!! with two monitors for what ?
to support the second monitor it seems.
read the link
http://nvidia.custhelp.com/app/answers/detail/a_id/2483

GTX 570 Twin frozr II driver crash

Hello When i play dx 11 games my driver says "Display driver stopped responding and has recoverd" it happens really frequently, it have done it since i re installed my OS i got a GTX 570 twin frozr II and i run driver 285.38(beta driver for bf3) also tried the one below it nothing helps it still crash.
Thanks you!

Quote from: Xerion on 30-September-11, 01:37:47
Hi svet, i played Crysis 2, i completet crysis 2 dx 10 everything max 2 weeks ago no crash, but when i play World of warcraft dx 11 it crash i think that is odd because World of warcraft take less GPU power than Crysis 2..
Yep, looks to be other reason like game specified problem..
try latest patch for this game, reintall the game, try different vga drivers.
or contact blizzard support if nothing helps

Unstable GTX 570 Twin Frozr III OC

My brand new MSI GTX 570 Twin Frozr III OC is unstable. When under load suddenly the sound hangs and the GTX shuts down for a second and the screen goes black. After this it works again. Some games can handle this, but with others I'm back @ desktop.
My rig:
- Intel i7 2600K
- Asrock P67 Pro3 B3
- Corsair Vengeance 2 x 4GB
- Cooler Master Powersupply Realpower Pro 700W Modular
I'm running Windows 7 Ultimate (64bit)
Is this problem due to the known stability issues and should I have a VBIOS update? If so which one, because GTX570 Twin Frozr III OC isn't on your BIOS update list.

Back again...
Today I installed a new PSU (Corsair GS700 single rail with 56 A over +12V) and started playing Bioshock 2 because the error used to occur the most often playing that game.
I played half an hour feeling more and more relieved when suddenly..... same sh*t happened.
Windows crash report had the following to say:
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   Bioshock2.exe
Application Version:   1.0.0.1
Application Timestamp:   4d9fc504
Fault Module Name:   Bioshock2.exe
Fault Module Version:   1.0.0.1
Fault Module Timestamp:   4d9fc504
Exception Code:   c0000005
Exception Offset:   003ed2eb
OS Version:   6.1.7600.2.0.0.256.1
Locale ID:   1043
Additional Information 1:   0a9e
Additional Information 2:   0a9e372d3b4ad19135b953a78882e789
Additional Information 3:   0a9e
Additional Information 4:   0a9e372d3b4ad19135b953a78882e789
I think we can rule out that it's a PSU problem. My mobo, processor and RAM are also new so maybe the problem is not the card. I already tested the RAM with memtest with no errors.
I will try to find another PC to test the card in. Can I do something else to maybe test the motherboard or processor?

MSI gtx 570 twin frozr III - Dual Screen Windowed mode issues

Ok, so... I was running a solo monitor 1440x900 resolution, i recently purchased a brand new asus 24 inch 1900x1080 monitor. Basically what is happening is when i play WoW or Battlefield 3 in windowed mode on the 1080p monitor the colors are not perfect. When i go full-screen on the new monitor no issues, but that is not what i want to have to live with. When i say the colors are not perfect what i mean is, for example when i look @ the sky instead of being a smooth transition or blend from one shade of the sky to the next it is bars or stripes of each shade as if i am looking at the sky in 8 bit color instead of 32 bit color. Another thing to note is that when i login to windows 7 the blue screen where i input the password has the same effect. The 1440x900 monitor is running everything just fine. the only issue is with the 1080p monitor.
I am using DVI cabling for both, and have swapped them around to see if that was the issue, and sadly it is not. I am running the updated gpu driver, which i uninstalled and re-downloaded and installed again tonight.
When i use the HDMI cable, that fixes the issue but i need the HDMI for my 42 inch tv.
Also in windows, just to cover my bases with this post, i have the native resolutions properly configured, as well as in the game for the given monitor it is being played on.
Anyone know of a fix for this?
i7 2600k
asus PBZ68-v Pro/Gen3
Msi gtx 570
Samsung syncmaster 953bw (1440x900)
Asus VS248 (1900x1080)
I am more than happy to re-explain anything that may not be as descriptive or clear to you just let me know!
EDIT!
When i run the 24 inch 1080p new monitor as my only monitor on the system, everything runs perfectly...
Edit #2
Ok so i have pin pointed a possible cause
This msi gtx 570 struggles with operating multiple displays with different resolutions, while dual screening with my 1080p television and the 1080p display, everything runs as expected. Having to also render a 1440x900 display is probably the reason i am having the graphic issues. Is there any type of utility, setting, or other fix to this type issue? also this gpu is certainly less than 2 weeks since i purchased i could get a different card to remedy this... any suggestion? if you suggest a different card can you say so with certainty that it will work properly under the condition in which 2 resolutions will be required?

Ok, the problem is fixed and Svet i skipped a step or two. I installed the new driver with the clean install to save time for an initial attempt. What is interesting is that with the Geforce driver, only one 1920x1080 resolution was available
The msi driver gave me 2 options, 1920x1080 and 1920x1080 (native). The latter resolution fixed the issue for whatever reason.
The solution to this problem is so easy, when i purchased battlefield 3 it prompted me to download the geforce.com driver and i did not think anything of it at the time, lesson learned.

GTX 570 Twin Frozr III POWER Edition supply issues

Hi there,
I've always been a fan of MSi products, so when the time came for me to start looking for an upgrade to my current graphics card, I started looking to what MSi had in their range. After some research, the GTX 570 TFIII seems a good option for me, as it gives good performance at a reasnoble price.
Unfortunately MSi seems to have fallen off the map in South Africa. I cannot find any retailer or wholesaler to even give me an eta for 570 or 580 chipset cards in the country, and I've tried all of the suppliers listed on your site and a few that arn't listed. Is there some worldwide shortage of these models? Did the ship sink? Have MSi forgotten where South Africa is?
Any help with the procurement of these cards would be greatly appreciated. I really don't want to start importing from the U.S/Europe myself, and I'd like to get an MSi card if possible, rather than go for a different make.
regards,
Al

Welcome to the forum Alandrix.
None of us work for MSI and as such we cannot answer to the supply shortage reasons.
We are at the mercy of the importers. MSI has no official representation in South Africa and all their products are imported by these distributers who have standing contracts with MSI.
Only these importers can supply you with information as to what is on order by them and as to when thses shipments are expected.
As for bringing this to MSI's attention, I suggest you open a ticket and describe the situation to them. That is the only way that MSI will be aware of any seeming neglect with regards to product availability by their official importers/distributers. >>How to contact MSI.<<
Its unfortunately the way it is and it will remain that way until MSI decides to invest in some official representation on the African Continent.
Check your PM. I posted a local contact that may be able to assist in your query.

MSI Afterburner and GTX 570 Twin Frozr 3

So I recently purchased a gtx570 and see that I cannot even see what voltage I am at with afterburner , no matter what I try I cant change or see voltage , I find it amusing that MSI is advertised on the box for an MSI card yet it doesnt work with my Twin Frozr 3 .
Does anybody have a tweak for afterburner so I can see what voltage I am at , I wish to attempt to lower my voltage and keep stock OC settings .
I do not wish to use 2 programs when afterburner is already the best and from msi .
Also , can lowering voltage slightly @ stock settings cause any harm whatsoever ?

Quote from: Svet on 09-July-11, 07:13:19
what exactly?
Probably my suggestion to unlock voltage control and voltage monitoring, like if I know he already try it. Will have helped to give us more information as witch driver he installs with his new card.
EDIT : the OP have another tread about another problem with the same GPU , I will suggest he make the cleaning of the registry as we suggest in the other tread first, one problem at the time

Msi GTX 570 Twin Frozr III PE/OC cooler?

I wanted to know, is this card built with nvidia's 'vapor chamber' or is that completely replaced by the twin frozr III blade cooler?

lol Svet i thought you would have known better
To thread starter;
its heat pipe based.
kinda like so
http://msi.com/pic/product/five_pictures4_2406_20110517100633.jpg

UEFI Request - GTX 570 Twin Frozr II

Big thanks to any and all who can assist. So tired of seeing the "SecureBoot isn't configured correctly".
Serial #: 602-V222-22SB1205134465
NVIDIA Firmware Update Utility (Version 5.118)
Adapter: GeForce GTX 570 (10DE,1086,1462,2224) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (7F,9D21) : PMC Pm25LD010 2.7-3.6V 1024Kx1S, page
Reading adapter firmware image...
Image Size : 82944 bytes
Version : 70.10.27.00.23
~CRC32 : 8F15EC9F
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GF110 Board - 12630000
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 570
Board ID : D012
PCI ID : 10DE-1086
Subsystem ID : 1462-2224
Hierarchy ID : Normal Board
Chip SKU : 275-0
Project : 1263-0000
CDP : N/A
Build Date : 12/22/10
Modification Date : 05/24/12
Sign-On Message : GF110 P1025 SKU 0006 VGA BIOS
MSINV222MS.310

n/m saw this thread.... damnit..
https://forum-en.msi.com/index.php?topic=172423.msg1256158#msg1256158

Voltage control on GTX 570 twin frozr III oc edition

Hey guys,
I can't adjust voltage in afterburner. I have it eneabled n de settings though.
Afterburner info:
Display device : GeForce GTX 570 on GF110 GPU
Display driver : ForceWare 280.26
BIOS : 70.10.27.00.01
GUID : VEN_10DE&DEV_1086&SUBSYS_25711462&REV_A1&BUS_1&D
Any ideas on how to make voltage work?
Rick

Use latest aferburner version:
http://event.msi.com/vga/afterburner/images/MSIAfterburnerSetup220Beta.zip

GEFORCE GTX 570 TWIN FROZR ll/OC GRAPHIC CARD NOT WORKING SERIAL NO::602-V255-01

I'M FRM INDIA I PURCHASED THE CARD ON 25-05-2011 THE CARD COMES WITH THREE YEARS WARRANTY AND FROM YESTERDAY THE CARD STOPS WORKING AND WHEN I CONNECT TO DVI OR HDMI PORT THE IS NO SIGNAL BUT THE FAN IN THE CARD IS RUNNING.SO I CONTACTED DIGICARE CHENNIA INDIA FOR RMA (RMA No.RTI-13215043)THEY ASK TO SEND THE CARD I SEND THE CARD AND THEY TOLD ME THAT THERE IS BURNT PCB SO WARRANTY IS NOT APPLICABLE I HAVE PAID IND 25000-/(USD 461.042) FOR THE CARD AND WITH 1 1/2 YEARS THE CARD FAILS I'M USING A GOOD POWER SUPPLY CORSAIR HX 750 WATT MSI BIG BANG XPOWER MAINBOARD. I'M USING MSI FOR MORE THEN 6 YEARS MY FIRST BOARD MSI X48C PLATINUM AND THE BOARD WORKS WELL UNTIL NOW SINCE 1 1/2 YEARS WARRANTY LEFT FOR THE CARD ANY ME I'M NOT A MILLIONAIRE TO SPEND AGAIN 461 DOLLAR TO BUY NEWCARD

>>Please read and comply with the Forum Rules.<<
>>Posting Guide<<

Msi Gtx 680 Twin Frozr, cold boot noise

So about 3 out of every 10 times I turn on my computer, it sounds like one of the fans running at full speed or something, it's very loud.
I dont know what it is . Its like rattling noises, grinding noise only on cold boot. When Windows start then all is quiet. I think its from graphic card.
Sometimes all is quiet when i boot pc, sometimes not. Its very rarely , and only when i booting pc and when windows start all is quiet.

Quote from: xmad on 16-October-12, 23:01:43
Perhaps some clarification is in order.
Is the fan spinning at full speed sometimes or making funny noises like the fan isn't spinning correctly.
You have two entirely different discriptions going on here. Running a full speed is one thing, grinding or vibration noises are another.
While it is working correctly use afterburner to increase the fan speed to 100%, there shouldn't be any rattling or grinding or anything. Same thing at start-up, they may goto 100% in reverse to clear dust, but they shouldn't grind or rattle.
You say: "Same thing at start-up, they may goto 100% in reverse to clear dust, but they shouldn't grind or rattle."
But Msi Gtx 680 Twin Frozr III dont have that feature. <--- I have that card. Only Gtx 680 Lighting got it.

GTX 570 Twin FrozR II cold boot noise

Similar Messages

Maybe you are looking for