GTX580 Twin Frozr II OC BIOS File Help Please

Hii guys!  I just got my GTX 580 Twin Frozr II OC installed today and I'm really excited but I'm having a bit of a problem.
I've tried flashing the BIOS using the MSI HQ USB Flasher but the program says that the BIOS file I downloaded from the MSI website is not a valid file. Live Update 5 can't seem to detect my motherboard model or BIOS Version and, possibly, as a result does not find any updates for the card. Also, the MSI website mentions an EXE file that's supposed to be in the BIOS file archive, yet there is no EXE file in the archive.
I need to flash the BIOS (?) because my graphics card keeps crashing when playing games.  Most times: black screen, followed by the card reverting back to stock speeds. Twice, however, the screen got completely messed up and I had to hard reset the computer. That was when I set the voltage to 1150. And yes, even at stock speeds and the stock voltage (which is how I have the comp running atm), the card crashes.. just after a longer while. It's also not a heat problem because my in-game temps stay around 65ish.
I'm sure the rest of my computer is stable because most of the components have been replaced including the old PSU I had; to a Corsair TX 750W.
I feel like I'm missing something obvious, because flashing the GPU BIOS is new to me.
But, any help would be greatly appreciated. 

Thanks a lot Svet! I was able to flash the BIOS without any problems, however I quickly returned to the old BIOS ROM because the graphics card was much more unstable with the "new" BIOS. (Which ironically also has a lower BIOS version number than the one that came with the card). Overclocking at all would really mess up the screen and at stock speeds (800, 1600, 2048) it would crash. I reinstalled Windows (went from 7 Home Premium x64 to 7 Ultimate x64) because it got messed up during some installations I was doing and now... everything's running like butter. :\
After booting it up, I reinstalled all my games and every single one of them runs fine. I still get some really bad FPS in Splinter Cell Conviction, which is upsetting because I was looking forward to maxing it out and playing it at 60.. but whatevs.
I've tested the card also using
Assassin's Creed (From 1 to Revelations)
Battlefield 3
Dragon Age 2
Deus Ex: Human Revolution
Crysis 2
Saints Row The Third
NFS Run,
and Arkham City.
The card has a lot of trouble playing Arkham City with Physx on or with any of the DX11 features and I'm surprised I'm getting poor FPS at all in some games because I'm actually only using a 1600x900 display. I'm not complaining because all the other games run maxed out pretty well; and the card seems stable. I was also able to overclock it, which was tricky until I decided not to overclock the memory - so that the Afterburner values are 1150 (voltage), 900, 1800, 2048, 85 (fan). It looks like if I overclock the memory at all the graphics card crashes. Was a tad disturbing as I read that others have gotten better overclocks but... again, the important thing is that it's stable and running well. But, out of curiosity, why can't it overclock higher like others have managed to get it to?
Two questions though:
I'm using Nvidia's 290.36 Beta drivers - is that okay? Or should I only use the drivers from MSI's site?
(To note, I've used all of Nvidia's drivers and they all appear to deliver the same performance across all games. By "all drivers" I mean the 280.26, 285.62, 285.79, as well as the 290.36.)
How long is the standard warranty on this card?
Again, thanks Svet for pointing me in the right direction.  :D
I'm even more excited now for SW: The Old Republic.
Aphax my GPU's serial number is "602-V255-060B1107208512" - why do you ask though?

Similar Messages

  • GTX580 Twin Frozr II OC : Display driver crashing in DX11

    I have two GTX 580 Twin Frozr II OC in SLI. nvlddmkm.sys seems to crash and restart after about 10 -15 mins on gameplay on DX11 games (I have seen it happen in F.E.A.R. 3 and Crysis 2 DX11). I have not had any issues with other games (I haven't played any other DX11 games), and surprisingly, it hasn't occured on Heaven benchmark (DX11) either, for some reason.
    Config:
    Core i7 2600K @ 4.5Ghz (Vcore:1.35V | Mult: 45)
    Corsair Dominator GT 8GB @ 1600Mhz, 2 DIMMS (1.6V, 9/9/9/24)
    ASUS P8P67 Deluxe
    Corsair HX 1000W
    2 x GTX580 Twin Frozr II OC (not overclocked above the factory overclock)
    300GB Intel 320 SSD
    500GB WD Black Caviar
    Windows 7 Ultimate x64
    Single Monitor
    The BIOS for the cards is up-to-date, so are all drivers.
    The voltage for both the cards was 1025mV. I upped the voltage to 1050mV (using Afterburner) and I haven't had any issues since (played Crysis 2 DX11 for a couple of hours). Could that have been the issue? If so, how do I permanently set the voltage to that value? And why am I having to do this in the first place?
    Thanks!

    Quote from: TripShock on 16-July-11, 10:30:54
    Also, do you know how to flash a new BIOS with different default values? I rather not have to set Afterburner to autostartup...
    - download NiBiTor v6.0 or above
    - save your bios by GPU-Z
    - open saved bios in NiBiTor and go to Tools/Fermi Voltage
    - change voltages Setting 2 and 3:0 from 1,0250 to 1,0500
    - change voltages Setting 2 and 3:1 from 1,0750 to 1,0880
    - klick Apply
    - save bios named gtx580.rom
    - than you must flash this bios on the card, you need bootable usb disk - try GOOGLE
    - if you have bootable usb and have copied right files for nvflash, restart pc, and get to boot from usb
    - in DOS mode write these commands: nvflash --protectoff for unlock security before flashing and the second command is nvflash gtx580.rom (name of saved bios)
    - watch in progress and at the succeed end, restart PC
    - finally in windows, reinstall driver for card
    Hope this manual was helpfully for you. Sorry for my english
    Regards

  • GTX580 Twin Frozr II bsod..

    Hey guys. I have recently purchased an MSI GTX580 Twin Frozr II OC edition and I am encountering blue screens of death after playing battlefield and call of duty black ops.. The time period I get those bsod is not specific, in other words I may get one after 10 minutes or after 1 hour. To be honest, that's what worries me the most.
    I have updated the vbios to the latest one with 1.025v and 800/1600/2048 Mhz. Furthermore, the blue screens I am getting don't splash and go right away. Actually the bsod stays there untill I reset my pc and they say about newly added hardware and stuff. I uploaded the dump file for you so you can help me.. https://rapidshare.com/files/459837240/043011-7831-01.dmp
    I couldn't figure out how to upload the .dmp file to the forum so if there is any problem with the link I provided please tell me.

    Furmark: http://www.ozone3d.net/benchmarks/fur/#download [leave it to test for 1 hour]
    OCCT GPU Stress Test: http://www.ocbase.com/perestroika_en/index.php?Download [leave it to test for 1-2 hours, with artifacts counter enabled]
    Heaven Benchmark: http://www.techpowerup.com/downloads/1961/Unigine_Heaven_DX11_Benchmark_2.5.html [at max possible settings, to loop over night 8-10 hours]
    Tropics Benchmark: http://unigine.com/download/#tropics [at max possible settings, to loop over night]
    3mark11: http://www.3dmark.com/3dmark11/download/
    Test with real games at max possible settings with Crysis 2, and other heavy newest games.

  • GTX580 Twin Frozr II OC: Crashing while gaming

    I have a GTX 580 Twin Frozr II OC. My computer crash randomly while gaming. The screen turns black and the computer restarts.  It happens on different games. I have the latest bios on my motherboard and video card (70.10.17.00.01). I have also tried many different drivers. Currently I have the latest installed (320.49).
    I have tried decreasing the core clock from 800 to 772 and increasing the Core voltage from 1025, 1038 and 1050, as well as different combinations of those.
    Config:
    Core i5 2500K @ 4.4Ghz
    Kingston HyperX Genesis 8GB @ 1600Mhz, 2 DIMMS (1.65V, 9/9/9/27)
    ASRock Fatal1ty P67 Professional
    Corsair HX 850W
    GTX580 Twin Frozr II OC
    2TB WD Black Caviar
    Windows 7 Ultimate x64
    Single Monitor
    The S/N is 602-V255-01SB1102013982.
    This is my bios http:// www .mediafire.com/?o6p4wf0prxa6tv5
    Thanks!

    The card came overclocked from factory. I decreased the clocks to the Nvidia default. The core clock to 772, Shader clock to 1544 and Memory clock to 2004. I also increased the core voltage to 1038.
    The idle temperature is 38 C and at full load it goes to 82 C maximum.
    Still, with all this, it still crashes now and then, but much less frequently.

  • Gtx580 twin frozr ii/oc problem

    ok, first of all here are my sys. specs
    asus sabertooth x58,
    core i7 950 box (default clocks),
    gtx580 twin frozr ii/oc, driver version is 295.51
    Corsair Dominator CM3X2G1600C8D 2x3gb
    corsair tx750w
    and ssd mushkin chronos 60gb (system disk)...
    win7 home premium edition x64
    and now my problem...
    my stock clocks for this card are 800/600 / 2048 with 1,38mV and with these clocks graphic card is very unstable... BF3 crashes, crysis 2 crashes... so ive played a little bit with clocks and found it stable when i dowclock memory at 1900, at least i thought its stable (it was "stable" for bf3, it would crash but not as often as before). but, recently ive started to play crysis 2 and after 15 min or so it would crash to desktop with "crysis2 is not responding" message.. so ive reset my clocks to the default ones but added more juice.. didnt help. so ive flashed new vbios. didnt help. note: bf3 is running well (for now)
    i dont know what to do? where is the problem? is it in the game itself or? i need someone to direct me as my pc knowledge is "low level"... thanks in advance

    Quote from: sknk666 on 28-February-12, 13:40:46
    yes, in afterburner ive tweaked clocks and it seems that that was the issue... since i didnt have any crashes. why is that, i dont know... i hope that you could tell me... seems like memory is quite unstable on this card.
    as i said, are there any drawbacks or impact on perfomance with these settings?
    Memory clocks isn't performance related,[the core clock it is] it will makes close to 0 difference in speed.
    Quote
    i dont mind my card is downclocked a bit i just want it stable... today il try to test it with 3dmark11 as i really dont have time to play games for a couple of hours just to see if it works... so, my question is, just to make sure : if it passes with no errors (3dmark11) is this then considered to be a stable clock?
    No, testing with 3dmark11 is not enough.
    You can add Unigine Heaven Benchmark, Furmark, OCCT GPU Stress test
    And real games.
    In short the time will shows

  • MSI GTX580 Twin Frozr 2, how to identify it?

    Hi,
    I need to verify if the graphic card that is in my computer is really MSI GTX580 Twin Frozr 2, and not GTX560 or GTX570 (to check if i wasn't cheated...). I cannot identify it from the others twin frozr 2 cards since it has same cooling system and no distinct markings anywhere on the card, or at least i dont know about them. Computer still isn't functional, but will be later on today. I didnt receive card in package, but already installed in miditower case.
    So plz i need fast answer, if there is any visual identification i can do, or software that i can use later today to see what graphic card it is.

    tell S/N of your card
    or just run VGA software like Afterburber:
    http://event.msi.com/vga/afterburner/images/MSIAfterburnerSetup220Beta.zip

  • MSI GTX580 Twin Frozr II too hot?

    Hi
    Just purchased an MSI GTX580 Twin Frozr II (800 mhz clock). Noticed the temps seem rather higher than what I expected. With case open, Idle temps are around 42C but running (45C case closed) (ambient temp is about 18-19C) Witcher II the load temps were getting up to 88C (95C with case closed and fans at 85%). This was after about 15mins. Now, correct me if I'm wrong, but the load temps with case closed (95C) are getting rather close to the chips max 97C where it starts to down-clock. So, is my Card faulty?
    Steve

    Hi,
    Just a quick update. Did some experiments last night. Laid the computer on its side and held a 120mm fan directly over the video card. Idle temps went down to 36C from 42C. I then ran furmark at 1920 by 1200 res extreme burn-in. Temps never got higher than 81C. Do these temps seem normal or are they still higher than what they should be? The heat sink on the video card gets extremely hot to touch at load, so plenty of heat is being transfered. The case, by-the-way, is a Lian-Li V1000 plus which has the motherboard placed in an upside-down config, so that the video card is at the top and processor below. This it got me thinking that air is getting trapped at the top and the venting fan isn't strong enough to pull the hot air out quick enough.
    S

  • MOVED: BIOS Overclocking, help please!

    This topic has been moved to Overclockers & Modding Corner.
    BIOS Overclocking, help please!

    Quote from: MurdoK on 13-January-06, 17:23:55
    Hello !!
    Please tell us which Motherboard you are talking about ?
    Greetz MurdoK
    I'm an idiot!!! I forgot to post which mobo I'm using!!! jajajajaja
    I'm using an MSI K8N NEO4 PLATINUM
    Greets!

  • MSI GTX 770 Twin Frozr 2GB OC Bios question

    I got the MSI GTX 770 Twin Frozr OC 2gb version and would like to know how to verify if I have the newest bios for the gpu.
    This is the newest version listed on the website : http://www.msi.com/product/vga/N770_TF_2GD5OC.html#download
    And thats an ss from GPU-Z, cant find the exact bios version in that downloadable zip from msi website and i cant seem to find the date created for the bios I have on my card now.
    Having some problems with gpu load drops and microstuttering, so wondering if a bios update might sort out my problems.

    The vbios on MSI site is a different vbios series (NV282MS.331) and older than your current vbios. Your vbios (NV282MS.352) is dated 06/18/13 while the one from MSI site is dated 06/11/13. Both are legacy vbios versions (no GOP support). You can try the latest hybrid vbios (GOP support) which is NV282MH.351. It is attached.
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • N560GTX-Ti Twin Frozr II/OC Bios Flash

    Hi guys
    Id really like to reduce the noise of this card and so I understand that the only way to reduce the fan speed under 40% is to flash the bios.
    I would really appreciate some help with this.
    I have saved my current bios using GPU-Z and im using windows7 64bit
    S/N: 602-V238-27SB1107095172
    Driver: 301.42
    BIOS: 70.24.21.00.00 (P1040-0050)
    Let me know if you need anymore info.
    Thanks
     

     You haven't tried Afterburner to control fan speed? Should be pretty quiet if fans are 65% or less Faster than 65% doesn't affect temperature any from testing I've done. None of my Twin Frozr cards made any excessive noise and I've had an assortment 6 different cards from 260 TF to 580 TF ll & 560 TF lll HAWK

  • 6950 2GB Twin Frozr II/OC Bios needed

    hi guys got a 6950 2GB Twin Frozr II/OC and looking for the bios file to download because i suck at flashing the bios and the card bios looks to be bad flash i can see the card in windows but the PC will not boot with it.. yes i have tested another card and it works
    so if anybody here can dump the bios i would be sop happy
    thx
    Tim

    Quote from: gyix on 07-March-11, 21:28:02
    thanks for that i have submitted a ticket there ;-)
    just wanting to see if people have the files i need so i can fix it asap
    Quote
    just wanting to see if people have the files i need so i can fix it asap
    This will be useless and gamble, without known the exact BOMs of both cards..
    Etc: big change to flash to wrong BIOS if its received by someone else with same VGA,
    as there is more than one models and variants which are using different VBIOSes,
    so you can easy flash to the wrong one.
    So best ask MSI. [tell them the SN of your card when asking for it]

  • GTX580 Twin Frozr ii oc

    Have been reading the comments from SVEt re GTX580 issues. I have been having the same crashes. BFE/Origin and Steam  ARMA. MSI Live update advises no updates are available for Video BIOS and reports my driver is  70.10.20.00.01.  I purchased and installed a new MSI twin frozr [[/oc for my sons computer.. Live update advises his Video BIOS as 70.10.49.00.03..  The only differences in systems are that I run two cards in SLI.. Disabling SLI made no difference to crashes on my computer yet my sons plays the game fine with no issues.. I read somwhere in a forum that the OC cards did have issues and that the latest BIOS adjusted the core voltage settings..  If I change my settings as per 1050 do you think this will fix my issue with crashes as advised to another member with similar problems or should I donate and buy the software for Video Bios update??

    Quote from: Squizzy326 on 08-August-12, 10:33:30
    I am happy to do that . Can you please answer my question regarding Kombustor Iin SLI mode why it shows low core voltage on one card and no change on the other.. I disabled SLI and the results switched ..
    Quote
    Can you please answer my question regarding Kombustor Iin SLI mode why it shows low core voltage on one card and no change on the other.. I disabled SLI and the results switched ..
    Because based on your results, seems kombuster only used one of the cards while testing.
    Not all 3D applications supports SLI.
    I remember for kombuster there was a separated shortcut [multi gpu support] in some versions.
    Other possibility is that the wrong SLI mode is used for kombuster.
    you can try change SLI mode from Nv control panel to AFR2 and retest

  • MSI N580GTX Twin Frozr II Overclocked Bios

    Quote
    core voltage 1012
    coreclock     822
    shader        1645
    memory      2138
    Everyone knows that settings which specified below is unstable..   what a shame that is default settings which produced by msi
    I need new bios of overclocked version;and also I don't want to descrease coreclocks.. if I want to default version of gtx580 I would purchased standart version.. but I was'nt.. So i purchased oc version and i want to experienced it as overclocked
    MSI N580GTX Twin Frozr II
    S/N:602-V255-01SB1101009487

    Quote from: SLaYeR KiNG on 27-February-11, 00:30:57
    Everyone knows that settings which specified below is unstable..   what a shame that is default settings which produced by msi
    I need new bios of overclocked version;and also I don't want to descrease coreclocks.. if I want to default version of gtx580 I would purchased standart version.. but I was'nt.. So i purchased oc version and i want to experienced it as overclocked
    MSI N580GTX Twin Frozr II
    S/N:602-V255-01SB1101009487
    Flash to this BIOS ==> https://forum-en.msi.com/index.php?topic=146139.msg1087535#msg1087535
    Retest
    Quote
    I need new bios of overclocked version;and also I don't want to descrease coreclocks.. if I want to default version of gtx580 I would purchased standart version.. but I was'nt.. So i purchased oc version and i want to experienced it as overclocked
    Quote
    I need new bios of overclocked version;and also I don't want to descrease coreclocks..
    You have to..,
    800MHz, 4096MHz are the right clocks for your card and not 822...4276
    ==> http://eu.msi.com/product/vga/N580GTX-Twin-Frozr-II-OC.html
    Quote
    if I want to default version of gtx580 I would purchased standart version.. but I was'nt.. So i purchased oc version and i want to experienced it as overclocked
    It will be still OC-ed, stock/reference clocks are 772MHz,4008MHz,
    while you will have 800MHz, 4096MHz as OC version

  • MSI Radeon HD 7950 Twin Frozr V2/OC BIOS update

    Have there been any BIOS updates compatible with my card? Perhaps adding Boost or (more importantly) Windows 8 UEFI features, or bug fixes? My BIOS is dated 2012-05-24, and I very much suspect there have been updates with Win8 features since that date. My card is the MSI Radeon HD 7950 Twin Frozr V2/OC, which I believe is the second revision of the MSI Twin Frozr HD 7950 line, before the Boost editions. It is, I believe, the only model in the line which used an HD 7970 pcb instead of an HD 7950 pcb. I would appreciate the latest BIOS, and if it wouldn't be too much trouble, a changelog?
    My BIOS, which I have captured using GPU-Z, can be found here: http://www.sendspace.com/file/jeq0pt
    S/N: 602-V277-05SB1205142483
    Also, if I do choose to flash, which position should my dual BIOS switch be set to?
    Thanks very much.
    Edit: Wow, got my serial number completely wrong the first time.

    I have a UEFI GOP (Windows 8 Feature) vbios for you (attached):
    Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (200.rar) and put the included file (TV277MH.200) on that stick.
    Rename TV277MH.200 to 200.rom. Put the atiflash.exe also included in the archive provided on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 200.rom [ENTER] and let it flash the vbios.

  • MSI N560GTX-Ti Twin Frozr II/OC bios

    Hi can you check my vbios?
    Model: N560GTX-Ti Twin Frozr II/OC
    Vbios: https:// w w w.dropbox.com/s/v7nd8a7f0t0e1nt/GF114.rom
    BIOS: 70.24.0a.00.00
    s/n 602-v238-16sb1101058046
    Can you also reduce the fan speed to the minimum of 30%?
    Thanks a lot

    thank you very much

Maybe you are looking for

  • ITunes 10.6.3.25 doesn't recognise CDs

    Hi, My iTunes always worked perfectly fine until the other day when it stopped recognising my music CDs. When running Diagnostics it says there are no issues and recognises the CD drive but it won't show the CD on the left hand side, under Devices. T

  • Can't get php and web form to function properly

    Hello, I have a html web form and a php code that works fine in my older website. i just updated my site and need to transfer the code for the html form into a newly designed page. I copied and pasted the form into the new page. The form come up and

  • Problem with master loads

    Hi all, While troubleshooting a load failure for a country, we were looking for the master files in UNIX for that country. But when we look in the directory for the country's master file in UNIX, we see the CSV file, but no files for the attributes.

  • Upgrading domain from 9.2.2 to 10.3.2

    Hi All, I want to upgrade a domain which is created in weblogic 9.2.2 to 10.3.2. This domain contains inventory application and below custom configurations like i.Create File Store ii.Create JMS Server iii.Create JMS Module iv.Create JMS Queue v.Crea

  • N8 Currency / Unit Converter

    Hi all, Anybody knows N8 is having inbuilt Currency/Unit Converter like in the other phones under the application "Converter"? I installed some converter widgets but all those need net connection and not userfriendly for me if anybody know any Curren