GTX590 Cant access NVIDIA control panel Black screen after 10 mins

Hi,
I recently purchased an MSI GTX590 and encountered this problem " Cant access NVIDIA control panel Black screen after 10 mins". I am running Windows7 Ultimate SP1.
I did have an xfire setup of 2xHD6970's, I uninstalled all the old drivers then used driver sweeper to clean out any remaining folders, also uninstalling them from device manager.
Next I installed the latest version of drivers from the NVIDIA site only to find that I am stuck in safe mode resolutions for my screen I cant access the NVIDIA control panel as it is saying " You are not currently using a display attached to an Nvidia GPU ". In device manager it states that
"Windows has stopped this device because it has reported problems. (Code 43) ".
I have now uninstalled and reinstalled about 6 different versions of drivers from NVIDIA including the latest BETA drivers which all have the same issue??????
I have also gone to the MSI site and downloaded their latest recommended drivers for the GTX590 NVIDIA Graphics Drivers Version 267.91 which are the only ones that seem to work as in it fixes the screen to the proper resolution and lets me into the NVIDIA control panel yet after about 10-15 mins the screen will go black or the computer will just freeze. Rebooting causes the same issue after 10-15mins
I have noticed a few others out there experiencing the same problem but no fixes as of yet any ideas??

Thankyou for the reply,
Tested the card in another working machine capable of running and its fine I am sure the PSU I have is more than capable of running this card I ran 2 6970's in xfire on the same PSU and motherboard with no problems.
I am running it on an 40"BRAVIA LCD and am using the DVI to HDMI converter that came with the GTX590 and I have also tried it with an DVI to HDMI cable also.
The system is stable under the latest NVIDIA drivers but the display drivers aren't recognized under device manager and the screen resolution is still stuck in the safe mode size, they are shown up as having the same "error 43" and I still can't get access to the NVIDIA control panel.
I strongly believe this is a driver issue or an issue relating to software within windows. To give you a rundown on several things that I have tried to isolate or fix the issue with is in a list here:
1. Installed every different version of drivers on an fresh install of windows7 including the latest Beta drivers
2. Tried to run the GTX590 on another machine and it runs using windows7
3. Run different graphics card setup using the same PSU RAM and mb on windows7 no problems.
4. Run the gfx card on only 1 gpu no change.
5. Last step I will take is to install Windows7 without the SP1 as I have read elsewhere that similar problems have been fixed by doing this if that don't work might just sell my soul to the devil n see if he can fix it lol.

Similar Messages

Cant access lync control panel

i have troubles opening the lync server control panel, when i login using my administrator i get "navigation to the webpage was canceled".
to get the obvious out of the way:
- DNS record for admin already added, pointing at lync FE server
- The user, used for loggin in is member of CSAdministrator
- I am able to ping between the Lync FE and and AD
- IIS https setup, ip:all unassigned port 443,is set to use the lync FE certificate
if any further information is needed please tell me

Hi,
Did you change the simple URL to access Lync server Control Panel? If yes, please make sure you also change for DNS record and certificate. You can run the Enable-CsComputer on each Front End server to register the change.
Please also make sure W3SVC work normally.
You can refer to the link below of “Troubleshooting Lync Server 2013 Control Panel”:
http://technet.microsoft.com/en-us/library/gg195689.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
you mean the one i set in the lync topology manager? called admin.domain.local ? if so, then no it isnt changed

Cant access quicktime control panel

I may be stupid or somethin, but I can't find the **** quicktime control panel to upgrade to the pro version.
I looked through my computer's control panel, there is only one user on it, but it looks like there is also an old administrator user there too.
There isn't anything about quicktime in my control panel, and I looked through the quicktime files in the c drive and didn't see anything about a control panel there either. Somebody got an idea? Because I just spent a worthless 39 dollars, and am seriously considering making the switch to linux.

Thanks. I do have a lot of appreciation for the macintosh-expecially since they came out with the os x. There's no doubt about it, it will be my next computer. If only I could get one at work.
But until I can afford that new computer, it's easy to convert my windows machine into that friendly linux that I'm getting used to.
There's no mistaking that Apple is the best in the business. But with windows, it's always one thing after another. I bought a new computer a year ago, the one I had lasted me 6 years, was expecting this one to do the same. But alas, a few viruses later it was toast. HP didn't give me the software to start over, so I had to do a system restore. Needless to say I don't have time to dig through my entire hard drive deleting the remains of the virus. But hey-no problem, because I have another one on there now.
And AIM is causing some wierd things to happen with the ui, among many other problems I constantly have.
So, instead of buying a new version of windows xp, which I can only re-install twice, I'm switching to my friendly linux. Then when I can, it's apple.
I really think the only reason people don't switch to the mac is because the first time you use it, it's different enough to be confusing or even frustrating. But after the first week, anybody should be using one with confidence. Some people might need some kind of tutorial or something.
hp a1010y Windows XP

Logic Board Replaced -Nvidia Control Panel Missing

Hello kind readers and helpers,
My laptop had to have the logic board replaced (twice) because of a faulty Nvidia GeForce 8600M GT card.
Upon its return, the Nvidia Control Panel was missing from the System Preferences and I'm now limited to the
adjustments I can make to the screen. The Nvidia Control Panel used to be there before the board got replaced.
I really need access to more detailed adjustments as I edit photos and video on my laptop and the current
display setting adjustments available in system preferences are just not cutting it... I need my Nvidia Control Panel
back!!
Can anyone tell me how to achieve this? I went to the NVidia website to try to download the drivers, but they
have no support for laptops!! Ough, faulty graphics chips and no laptop support!! Really?!
Please help me guys!!!
Thank you so much! =)

Laura Carlos wrote:
Hello guys,
Just FYI, with the Nvidia Control Panel the resolutions available to me were much higher than those available in the display system preferences; 2048 x 1536 at 85Hz (VGA) and 2560 x 1600 at 60 Hz (DVI). Now, the highest resolution available is 1920 x 1200.
Thank you for your time and support! =)
Ahhh, now it's making sense. You have a 17" (I have a 15"). 1920x1200 is the highest resolution possible on the built-in 17" display. Your MBP can output 2560x1600 to an external display, but that's dependent on the external display's capabilities. I wonder if that Sys Pref you're asking about only shows with an external monitor? Would that fit your experience?

Computer crashing and nvidia control panel missing options

Hey, I bought 2x msi gtx 970 and put them in sli mode. They worked fine for a while but yesterday I started having problems. I was playing shadow of mordor and suddenly my screen went black and my computer restarted. It worked fine afterwards tho. Then today I played some LoL and after playing for like 15 minutes or so it happened again. But now also after the computer restarted my nvidia control panel was missing options. There were only setup g-sync, set up stereostopic 3d and view rating for games. I'm not sure if this happened yesterday too. I tried reinstalling the drivers (tho I'm not 100% sure I did a perfectly clean install) and the options came back but the crash happened again and the options disappeared also again. I have 850w corsair tx850 so I think that should be enough power? My mobo is asus P8Z77V-Deluxe and cpu intel i7 3770k @ 4.3ghz. So what is the problem?
EDIT: after I restarted my computer again the options in the control panel reappeared
EDIT2: I ran furmark with both sli on and sli off for about 50 minutes and oddly enough my computer didn't crash. Everything ran well. Here's some statistics from sli: GPU1: 1316MHz @ 99% load, temp 80 C, voltage 1.193V, GPU2: started at 1303MHz and then dropped to 1277MHz @ 97% load, temp 62 C, voltage 1.206V. Another weird thing is that the crashes in lol kept happening even after this and always around 15-20 mins to the game. I would say it's an issue with lol but it happened once with shadow of mordor too. I haven't played any other games. Also it's weird that this started happening only recently, not from the beginning. I do recall downloading some update to geforce experience recently, don't know if that matters.
Also I'd like to know that are those temperatures normal for air cooling in sli and/or are they too high?
EDIT3: Just noticed that everytime I try to run pci-express render test on gpu-z my computer crashes instantly and apparently trying to run furmark now also crashes the computer

Quote from: Nichrome on 16-October-14, 00:56:09
Hello,
Could you please be more accurate on your spec: >>Posting Guide<< RAM, frequencies, timings and so on.
Would be worth trying bit more powerful PSU. Not saying this one is insufficient, but it's always best to rule something out for 100% sure.
Remove OC from the CPU and RAM (RAM to be 1333MHz and CPU to run stock). Or try >>Clear CMOS Guide<<
Make sure that you're running latest BIOS for the motherboard <Contact ASUS about it>
Temps are completely fine for SLI on air. Top card always is much hotter than the other. However you could reapply thermal paste on both cards, run single card for 1h and record its temps, then do the same for the 2nd card (in single card mode so the other is out of the PC) and use the cooler one on top.
I feel so dumb right now. Seems like one power cord from the psu to my gpu wasn't properly attached and now that it's completely connected everything seems to work. I'll update this thread if that didn't fix the problem. But anyways thanks for your fast response

NVIDIA CONTROL PANEL APPLICATION HAS STOPPED WORKING

I have got a big problem here with NVIDIA cards and have not been luck at all. My problem started when I had a clean install of Vista 32 on my HP XW6600 which came with Windows XP installed with an option to upgrade to Vista. When I upgraded I also upgraded my GPU from GT 9500 to Quadro FX1700. When I tried to open the control panel all I got was an error message saying it has stopped working. I never had this problem in XP with the 9500GT.
I later sold the quadro and purchased the Geforce GTX260 and had a clean install of Vista 64 on my system. But still this nvidia control panel cannot be opened. I am a professional video editor and needs the advantage of two monitors when running Adobe Premiere PRO CS4. I have seen some forums which says uninstall all nvidia drivers, use CC cleaner or Drivesweeper, in safe mode and reload the Nvidia drivers once again. but all this have failed.
My patience is running out now and I am now considering switching to ATI cards. I wanted to take full advantage of cuda with nvidia and was looking foward to purchase a quadro 5600 for maximum added perfomance. I have just ordered a second monitor from DABS.COM which I intend to hook up with my system and without accessing the Nvidia control Panel I will be in trouble.
Am I missing something here. PLEASE tell me know if you have got an idea on how to resolve this. I have attached a screenshot of the error message I get.
System
HP XW6600 Vista 64
Quad Xeon 5420 2.5ghz
250 GB C drive
750 GB D drive
1.5 TB Raid 1
GTX 260
4GB RAM
ADOBE CS4 Production Premium

"It has to be that HP thing"
Bill what is this HP thing. Could you expand on that please because I have just completed a clean install using HP RESTORE plus disc and my drive was completely wiped out. Not even Windows OLD files were left.
I then installed the drivers using the Original CD that came with the GPU, still the problem remains. I updated the driver using the internet and it didn't help neither. I have also purchased an Intensity PRO editing card and expecting a 22" HD monitor thhis morning for HD editing.
I think ATI is the way forwad. Which is the best ATI card for HD editing. Budget maximum GBP£150.
YOUR HELP WILL BE GREATLY APPRECIATED.

W520 and hooking to TV - No DisplayPorts show connected in NVidia Control Panel

I had hoped the video would go well, leaving me to just have to worry about the audio issues when trying to drive my TV from the W520. I have the latest BIOS and NVidia Optimus drivers from the Lenovo site.
When connecting the TV to the laptop DisplayPort I tried to bring up the NVidia Control Panel (and also Desktop->Screen Resolution) to see if I could see the second monitor. The 3 DisplayPorts show no connection in the NVidia Control panel. Is this indicative of the cable maybe being bad (Should I at least see one connected even without a cable)?
Other thoughts? Thanks,
Eric

hey ericvn,
have you updated the drivers for your nvidia yet ? The current version right now is 8.17.12.6871 and if yours isn't this version; do update it.
if yours is this version, try uninstalling and reinstalling and at the same time do test the cable on a different unit.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Cant sign into control panel after new

cant sign into control panel after new Firmware instaltion. Please help. WRT160N v2

Thats nice to know that, So just reboot a modem has solve the problem. Enjoy.

NVIDIA Control Panel application 1.5.30.49

Good evening guys. I a6255.it Pavilion Desktop PC with windows vista home premium 32bit. Please let me know where can I download the NVIDIA Control Panel Application 1.5.30.49 drivers for my PC. Thank you for your interest

Hello alba,
I understand you are looking for NVIDIA Control Panel Application 1.5.30.49. I would suggest you take a look at the NVidia Support Site as I believe if anything this application is included in a Softpaq and I have been unable to locate one that it may be in. You will proabably getting a clearer answer from NVidia.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I have iphoto previously installed. running but when i have synced my iphone4 the iphoto app. cant be launched anymore. a black screen with the hourglass running till it quits automatically. What should be the problem???o

i have iphoto previously installed. running but when i have synced my iphone4 the iphoto app. cant be launched anymore. a black screen with the hourglass running till it quits automatically. What should be the problem???

Try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home/() Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Click to view full size
OT

TS3354 iTunes states I need an HDCP compliant monitor to play HD video. My Nvidia control panel states I have a compliant monitor and card.

according to my nvidia control panel my monitor (shimian 27in (apple cinema display) IS HDCP ready, but itunes thinks otherwise. Running a GTX780 in 2560x1440 resolution. Any advice would be appreciated.

Ok so I got it going by turning down my monitor's resolution to 1080p. A bit annoying to flip back and forth but a simple solution.

Quad SLI option not available in Nvidia Control Panel after complete reformat

I had a SSD failure on this new build in Raid 0. Before I RMA'd the HD I went with one HD and was able to get Quad SLI running. Now after going Raid 0 with the new HD I had to reformat and I reloaded the OS and then updated all the drivers. Now I no longer get the option for Quad SLI even though my cards are seen by the device manager and the NCP. I can only go SLI on one card and can dedicate a GPU on the second card to Physx. I used the uninstall feature for each driver last night and then restarted in Safe Mode and used driver sweeper to clean out any remnants. I then rolled back to an earlier nvidia driver on the 500 series with no luck. I installed Live Update but did not use it except to scan my system. It shows the latest Bios so that has not changed since. I also made sure that I was using the latest Realtek drivers. Any help will be appreciated.
MSI P67A-GD65 (B3) latest Bios
Win7 64bit Home Premimum SP1
2 EVGA GTX 590 Classifieds
16g 1600 Corsair Vengence
2 ea SSD 120g Corsair Force GT's Raid 0
Antec 1200W HC gold PS
Coolemaster HAF X Case
Corsair H100 H2O

NO i was not able to get windows to load. I would have an intermittant SSD failure at diferent points during the installation process. I went to a single drive and it installed fine and after completion I downloaded updated drivers and went into the nvidia control panel and activated quad sli. I did have to remove one of the cards during the SSD install in order to facilitate the installation of the Sata cable into the MB. It is possible that the SLI bridge may have gone bad since it was disturbed. I ordered another one to be sure and it will arrive today. While waiting I switched the video cards in their slots to check them and I also verified that the PCI slots are good. Is there some history of a conflict between Raid 0 and 4 way SLI that I should be aware of?

My nvidia control panel dissapeared from mac pro

My nvidia control panel dissapeared from early 2008 mac pro running 10.6.7 osx snow leopard with a NVIDIA GeForce 8800 GT graphics card.I have tried reinstalling the driver from the nvidia website,time machine,and software updates.Nothing seems to bring it back. Solutions anyone?

Hi Jack,
Yes the GT120 will work with the DVI port but the mini-displayport will not function on the card so you'll be limited to using one display. The handy thing with adding a GT120 to a 2008 Xserve is you can use it for compressor if you want to, to render videos.
Best
Beatle

Nvidia control panel for gtx680mx on iMac

Hi,
I baught the late 2012 iMac and was wondering if Apple provides the all features/software for the NVIDIA GTX680MX that it comes with. When NVIDIA drivers are installed on the PC, the drivers that are installed on the system have the NVIDIA Control panel and the settings specific to the video card to tweek the video settings. I dont see them on the system prefrences or anywhare. I do not see any Mac/OS X drivers on NVIDIA'swebsite either.
Cheers,
Sameer Jaffer

NVIDIA drivers are included with OS X, and Apple updates them with every maintenance updates. Those drivers don't include the NVIDIA Control Panel, as it happens in Windows, and there isn't a NVIDIA Control Panel for OS X

Envy recline pc27 k119 - no option to adjust contrast/brightness on NVIDIA control panel

cannot adjust brightness/contast settings. NVIDIA Control panel only has 3D settings under navigation tree - cannot find video option.

Hello msolit,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues trying to adjust the brightness on your HP device. I would be happy to assist you, but first I would encourage you to post your product number for your computer as I was not able to locate suitable information using (Envy recline pc27 k119). I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

GTX590 Cant access NVIDIA control panel Black screen after 10 mins

Similar Messages

Maybe you are looking for