GTX680 Lighting, ok to do this ?

As you know afterburner software locked 680 lighting to have unlocked voltage control. Now i use the latest beta of AB software, 3.0 beta 9.
Can you tell me if this is ok, and it really unlocks the voltage on all AB software versions ?
1.Located MSI Afterburner folder
2.Located Profiles folder
3.Opened the profile with the current BIOS i am using
4.Under [Settings] tab in the cfg file i entered
VDDC_Generic_Detection = 0
VDDC_CHL8318_Detection = 46h
VDDC_CHL8318_Type = 1
5. Then saved the file, and reboot the PC, and now i can see more voltage that 1.175V
But i am not sure, i want to ask you this method works ok, and is fine ? There are other methods to unlock AB software ?
PS: I want someone to explain me what those lines are doing to afterburner, how is controlling the voltage...

Read >>How to use MSI Afterburner<< (First place to go here for Afterburner questions)
Quote from: flobelix on 02-April-13, 00:02:44
Version update (BETA!):
Afterburner 3.0.0 Beta 8 is out. Click >>here<< for download.
This is the beta version announced in my prior post. Besides Titan support MSI finally managed to bypass Nvidia's restrictions for the GTX600 series. Voltage control is now fully unlocked again on MSI GTX6x0 Lightning, PE and Hawk.
Release info is rather slim and not including that info provided by Unwinder before release:
Please note: This is a beta and no official release = no technical support.
Quote from: flobelix on 09-April-13, 04:08:07
Latest Version update (BETA!):
Afterburner 3.0.0 Beta 9 is out. Click >>here<< for download.
This is a new beta version. Still voltage control is now fully unlocked on MSI GTX6x0 Lightning, PE and Hawk. Also Radeon 7950 Boost support
Release info is rather slim and not including that info provided by Unwinder before release:
Please note: This is a beta and no official release = no technical support.
Just use Beta 8 or 9 and your good to go (if vbios is unlocked also).

Similar Messages

  • Help Overclock GTX680 Lighting

    Good afternoon everyone, I would like to ask everyone a help. Recently bought a GTX680 Lighting and now I'm part of the family MSI. As my first post I hope to enlist the help of everyone.
    I'm having trouble trying to overclock this board. I changed the key on the board for the position L2N, and made the switch to a bios with L2N unlocked. The problem is I can not stabilize any overclocking, what might be happening? If put into default can run games without artifacts but if I try some over soon they appear. What can I be doing wrong? I tried some profiles successful I found on the net but can not stabilize.
    My current setup is:
    Motherboard Asus Crosshair V Formula
    AMD Phenom X6 1100T Black Edition 4.0GHz
    8GB Corsair XMS3
    WD Caviar Black 1TB HD
    Corsair Hydro Series H80i
    Power suplies X Series Full Modular OCZ 1000w
    MSI Gtx680 Lighting
    Could anyone help me? Where should I start doing over!?
    Thank you,
    Sorry my english is not very good.

    Quote from: flobelix on 14-March-13, 05:01:37
    What oc are you trying to set? With what tool are you overclocking? Does card work perfectly without oc? Have you tried oc in normal bios?
    Ty for the reply flobelix. I'm using the msi afterburner. Yes the card work perfectly without oc. I don't know what i'm doing wrong, but yestardey night i get a stabilezed over using the l2n bios. My problem now is about the temps. In full load temperatures are reaching 76 º c. In stock i'm reaching 55ºc. Any tips?!

  • IMac G5 Ambient Light display BLACK  but this is diffrent.

    Hi all,
    I have interesting problem with my iMac which is hard to explain but ill try.
    So far i have failed to find a solution for this.
    We all know that Black screens is a big iMac problem but mine is slightly diffrent. so here goes maybe you guys can help.
    My iMac G5 Ambient Light would run well for days even for months as long as i dont turn the machine off.
    if i try to reboot:
    -No Startup chime,
    -Harddisk starts, runs then waits.
    -30 sec later Fans blow at full speed.
    Diagnoses:
    LED 1 on, LED 2 on, LED 3 off LED 4 off
    my iMac does not get passed LED 2...
    So we have power in the system just the display is not communicating and there is no overheating problem.
    The Wierd Bit:
    This is very random but if i play with the iMac, trying to start it up sometimes it takes 20x pressing the on off switch in the back and sometimes 2 times and sometimes even trying for days. All of a sudden Presto the **** thing works again. So then i dont reboot for a couple of months scared it will not restart. At that moment everything works fine again with no problems.
    LED 1 ON LED 2 ON LED 3 ON LED 4 OFF systems normal
    Untill the moment i have to reboot again. once again black screen and i startup the procedure again. Done all the usuall stuff reset PRAM, VRAM, PMU nothing will work. Then playing with it ON / OFF, ON / OFF, ON / OFF, and Bang it goes again. Works fine for Days and months till i have to reboot the thing again or shut it off. The other wierd thing is its also not after every reboot. sometimes it would reboot fine and with the Startup chime. so the problem is very random and i cant seem to put my finger on the problem.
    What i know:
    -HardDisk is running fine (checked). no problems there,
    -MEM is good (checked)
    -LED indications when running normal LED 1 LED 2 LED 3 are on and LED 4 is off as it should be.
    -Firmware is uptodate, version OSX uptodate. Cooling fans run sweet and clean when the iMac works.
    - Serie Number falls out side of the Repair Service Recall that Apple had annouced.
    Everything seems to work as it should when iMac runs!!
    So today it happend again i needed to move my iMac today so i turned it off moved it. Then wanted to turn it on again and there it was a black screen no chime and fans blowing. So now i have to play with it again to get it on again and working again.
    Sorry for my Message to be so long but its the only way to give you guys a good clear picture of the problem im having.
    Hope you guys can help..
    iMac G5 (Ambient Light)   Mac OS X (10.4.7)   1 Gig Ram

    As should be obvious by now, your problem is caused by using a model-specific grey installer disk with another Mac model. Not only will it cause technical problems because is it not designed for this purpose, it is a violation of the license that comes with the Mac to use its disks to install the OS or other included software on another Mac.
    You must obtain a retail copy of Leopard to install that OS on your iMac G5. You must have a license for each Mac you install it on, either the license that comes with that OS pre-installed on a Mac or the one that comes with the retail copy of the DVD.*
    Also note that the grey disks for each Mac you own should be retained, as they include installers for the bundled software that comes with it & a model-specific Apple Hardware Test ("AHT") that must be run from that disk. You cannot easily duplicate the grey disks, in part because the AHT partition is not a conventional boot volume & a disk image file of the entire DVD must be written in a specific way to the duplicate to work like the original.
    However, even if you manage to do this, the duplicate still cannot be used with another model, so the only reason to make a duplicate of a grey disk is as a backup for the original.
    \* A site license or bulk license also meets this requirement, but you still must obtain a suitable installer disk.
    Message was edited by: R C-R to include the footnote.

  • Light Table question - Lock this Browser to the Viewer?

    What does the button that says "Lock this Browser to the Viewer" do?

    You can open multiple Albums or Projects at once using Shift-click or Alt-click. If you do this without locking the Viewer pane to a particular Browser pane then the Viewer will automatically swap to whichever tabbed Project or Album you select.
    Ian

  • With recent upgrade to 7.0.4, I can barely see the screen as the background on everything is too light.  How can this be fixed or how do I unstall this upgrade?  It is almost impossible for me to use my phone now.

    I am barely able to see anything on my phone, texts, emails, etc with this recent update to 7.0.4  How do I fix this or uninstall this recent update?

    Thanks for the response, but it doesn't help.  The icons in email are barely legible as is the keyboard for email and texting.  Even reading your response on the phone was an issue.

  • I bought an Apple Airport and the light is flashing a yellow light! I did this because I live in a basement and the modem is in the first floor. I followed the instruction manual and the Airport is not working still. how can I make my Airport work?

    How can I make the Airport work?

    If there is a modem and not a router on the first floor, then the only possible way to get it to work would be an Ethernet cable connection between the modem and the AirPort Express device.
    I think you need to describe your situation in more detail.

  • Setting Time Zone location marker still lights up in iOS 5.0.1 . Does this happen to you?

    I have updated my iphone 4 to ios 5.0.1 ota and when the phone boots up the time zone location icon lights up i know this because i checked it in location services system . So does this happen to you ?

    Yes, I saw this happen as well a week after upgrading to iOS 5 it started showing up all the time. So I shut the phone down and rebooted and the problem went away.

  • What technique best for this portrait? Remove blue rim light & oragne skin tone.

    Hi.
    I'n no good at all this CS5 business!
    I've removed the white background from the original image as it was a January day and net curtains, it left a horrible blue cast around all the family shots. I used the Quick Select Tool and the eraser tool - maybe I was in error?
    1) How do I remove this blue rim light please?
    Also, this girl appears in group shots and is far too oragne when everyone else is milky white - not sure what she thought she was doing having a Tango spray job!
    I applied something already which added some blue to her skin ..... now her teeth have gone cool too so I need to back-track and start on the oragne removal from scratch.
    2) Thus far I've re-opened the finished image into Bridge as it has a specific Orange channel in there, but what trick am I missing whilst the image in open on Photoshop please?
    Many thanks Photoshop gurus!
    Tim

    Do you know a company who can do this stuff in the UK say who don't charge the earth?
    I've been trying to understand this stuff and the more I fail the more I fail. Two days on and I've yet to step outside my house - hopeless work flow and no way to be living a life.
    I absolutely don't want to do this for or as any part of earning a living so need to farm out this stuff. I'm selling all my camera gear as soon as my last job on 05 June is over so keep an eye out on eBay for the Nikon, Blad, Mamiya and Bowens etc kit I'll be flogging off!
    20yrs on from a post grad in photography and I have failed miserably to grasp any of this digital work flow.
    Time spent infront of a pc is time in my life utterly wasted - it's having implications both for my health and my home life so something has to give and it's the failing business of my photography. At some point one has to accept that the end has been reached.
    So who do I send these files to?
    Cheers

  • Mid 2010 MacBook pro took a keyboard spill.  It still works but display is sooo dark - like no backlight.  I think this is an LED screen.  Does anyone know the fix for this?

    Hi all...  My mid 2010 MacBook Pro took a keyboard spill.  It still works but the display is very very dark.  A faint image can only be seen at an angle in very bright light.  I think this model has an LED screen.  Can anyone please tell me what the fix for this is?  Thank you sooooo much! 
    < Email Edited By Host >

    Spill Cleaning
    Some liquid has just spilled into your Mac. What should you do?
    Do
    Immediately shut down the computer and unplug the power cord.
    Remove the computer's battery (if you can)
    Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
    Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
    Note what was spilled on your Mac.
    Bring the computer into an Apple store or AASP as soon as possible.
    Don't
    Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
    Don't shake the computer (this will only spread the liquid around).
    Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).

  • Itunes is constantly downloading podcasts, deleting them, and redownloading them. How can i stop this?

    Itunes downloaded 122gb in a single day last month, which pushed me well over my internet data cap. My podcasts are set to keep all unplayed podcasts, and to automatically download the most recent ones. These settings are what I've used successfully for close to two years now.
    Today I installed Windows 8 RP, hoping to resolve the issue (and of course play more with W8RP). Started it up, subscribed to a podcast, the newest episode was downloaded (i had watched it on their website previously), i right clicked it and selected 'mark as played', it disappeared and was not redownloaded. As intended. So then i subscribed to my other 30ish podcasts and observed the downloads page in itunes for a bit. One completed, disappeared and never reappeared anywhere. It wasnt in podcasts at all. I waited for another one to complete, same thing happened. But when it disappeared from the downloads queue, the first one reappeared at the bottom of the downloads queue.
    Any idea what's going on? googling didnt help in the slightest.

    Your post creates more questions than I could imagine possible.
    JustSuds wrote:
    Itunes downloaded 122gb in a single day last month, which pushed me well over my internet data cap. My podcasts are set to keep all unplayed podcasts, and to automatically download the most recent ones. These settings are what I've used successfully for close to two years now.
    Today I installed Windows 8 RP, hoping to resolve the issue.
    So, you are trying to use Windows 8 to resolve the issue of going over your data cap, is that correct? (Surely not!) But, watching, so it's a video - and then letting iTunes download the same video as a Podcast is the reason you're going over your data cap, isn't it?
    But frankly, I'm confused about the nature of your issue. Is it that you go over your data cap, or that iTunes (and I have to assume you mean iTunes and not Windows 8 [RP]) is downloading the same Podcast twice?
    Why do you need to manually set a Podcast to "mark as played", iTunes will do that for you when the Podcast ends? What has Windows 8 got to do with any of this?
    And why are you subscribing to your other 30ish Podcasts after downloading Windows 8 (yet more of your data usage allowance)? You imply that you regularly listen (or watch) these Podcasts, so presumably you are already subscribed to them, so why subscribe again? Are you doing this in Windows 8 as well as iTunes?
    Sorry if I sound negative; perhaps it's me, but I really don't understand what exactly you are doing, which suggests that whatever it is, is the reason for your issues. Maybe someone else will see the light and add to this post and sort out your problems, but if not, then perhaps it's because they are as confused as I am and can offer no useful advice.

  • How can i display light in ALV

    hi gurus ,
    i want to use lights in my program. i don know how to proceed. can anyone of you pl  help me with code.
    An early reply will be highly appreciated..
    regards,
    Neeraj Srivastava

    hi,
    In simple words.
    1) Create a field in your internal table which is used in the ALV Grid. Call it LIGHT.
    2) Create this field in your field catalog also, and make sure to set the field in the field catalog for ICON.
    fieldcatlog_wa-ICON  = 'X'.
    3) Now to fill the field you simply WRITE the icon to the field.
    Loop at itab.
        case itab-field1.
           when 'A'.
                write icon_green_light as icon to itab-light.
           when 'B'.
                write icon_yellow_light as icon to itab-light.
           when 'C'.
              write icon_red_light as icon to itab-light.
        endcase.
    modify itab.
    endloop.
    Rgds
    Reshma

  • Premier Pro CC 2014 crashing, wasting enormous time, not able to load files into previous rev - this is crazy!!!

    SOMEONE AT ADOBE PLEASE HELP!!!
    I have had no problems editing Red Epic 4K R3D files in the past revisions of Premier CC but ever since creative cloud updated me to the latest Premier CC 2014 (8.0.1) I cant get any serious work done as my system is crashing on startup, or after a few minutes of work, freezing on playback at times, giving me artifacts at times and is just a miserable and frustrating experience I can get NOTHING done with!!!
    How could Adobe release a piece of so called professional software like this with these now obvious MAJOR issues so many of us are experiencing, wasting massive time and money for all of its users and how can I get this running properly and stable as our livelihoods depend on this software to work and thats what we pay Adobe for ???
    I am currently working on :
    Mac OSX 10.9.3
    Mac Pro 5,1 Tower
    Nvidia GTX 660 2GB Graphics card
    Cuda Drivers 6.0.37
    I use a SSD swap drive and boot drive of 1/2 TB
    I have a 6TB internal Raid for all my media files
    I am editing 4K Red R3D files in a 4K timeline that I had no problem editing in previous version of Premier CC ???
    If Adobe would have thought before changing the file compatibility with the new Premier Pro CC 2014 where you cant load a file updated to this new version back into Premier Pro CC previous revision or included some kind of import / export to and from previous versions I think we would all at least be operational again right now until Adobe can fix its errors in this new revision but they obviously didn't care to think about compatibility, safeguards for users and just adding more new features with a new file format in a buggy piece of software?
    I have wasted days now on trying to solve these problems following other users in this forums suggestions including the following listed below:
    • Reinstalled my OS downgrading to 10.9.3 originally thinking it was something OS related since I updated to 10.9.4 around the same time this all started happening
    • Uninstalled / reinstalled Premier Pro CC 2014
    • I have updated my permissions to read/write on my main user account on the Adobe Library files
    • I have updated my permission to read/write on my main user account on my overall drive
    • I have reverted my CUDA drivers back one revision as these were recently updated as well
    I AM TIRED AND FRUSTRATED WITH ALL OF THIS NONSENSE WHEN I JUST NEED TO EDIT SO CAN SOMEONE AT ADOBE PLEASE SHED SOME LIGHT ON ALL OF THIS AND GET ME BACK TO A PLACE WHERE I CAN USE THE SOFTWARE I PAY FOR AND NEED TO BE ABLE TO WORK WITH TO KEEP MY BUSINESS OPERATING AND COMPLETE THE WORK MY CLIENTS ARE WAITING FOR ???
    Originally I was very impressed with Adobe CC and Premier CC once I started to work with it after many years of abandoning the use of Premier as a Final Cut Pro 7 user but later decided to try Adobe again when Apple abandoned its pro base with the original Final Cut X. I also did not think this new cloud software model was all that bad over the old boxed method. This was all also before the big Final Cut Pro X update in December 2013/early 2014 where Apple appears to be back to support the real Pros but I have stuck with Adobe CC and Premier CC and been happy since that time. Now I am wondering if this was wise as I have had a number of other issues with other CC Apps, updates, etc and this is starting to feel like Creative Cloud is becoming a big, sloppy, buggy mess to me?

    Also...
    Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
    There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
    You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
    Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
    I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

  • How do I run a Midi Light show from within Logic Pro?

    Hello,
    I'm trying to figure out how to run a midi light show along side or within logic pro. I currently run .wav synth files through logic into an Onyx Satellite into the PA system, I want to run a lights show that fits perfectly with each part of the songs running on logic pro. I need tips on everything: hardware, what intelligent lights I need, how to best program and set this up.
    Any help would be greatly appreciated
    Message was edited by: Host <to clarify Subject>

    Hi
    I use the NSI MC1616 midi controller. with it you can control 16 separate banks of lights and store 16 scenes. the unit uses midi program change messages for each scene and CC #1 info for fade rate. Since the MC1616 sends the program info midi out, I use it to send the commands to logic in real time, playing along with the song, pressing the scene buttons, to program the lighting cues.
    Hope this helps
    Don

  • Adapter light stays on even after removing from MacBook Pro

    Hi,
    I have a MacBook Pro. I noticed something odd last night. When I remove the adapter from the MacBook Pro (you know, the magnetic end that attaches to the MacBook Pro), the light on the adapter still stays green/on. I actually have to unplug the adapter from the wall outlet to make the light turn off. This never happened before.
    Has anyone seen this before? Any advice?
    Thanks.

    I think that the light is controlled by the middle pin in the connector. Check it very carefully with a magnifying glass to see if any of the pins are bent or if there is any metalic dust in there.

  • On the side of my macbook pro, there is a round button with dots beside it. What is this?

    What is the button on the side of macbook pro. There is a bunch of dots beside it that look like possible lights? What does this button do? and Should i touch it or not?

    It's a battery meter.
    You can press the button whenever you want to see the current status of the battery charge.

Maybe you are looking for