Guest account not working

Guest WiFi is not working.

We need a bit more information to be able to help.
Are you saying that the Guest Network was working before and is now not working?
Or, that you are trying to set up the Guest Network for the first time?
The Guest Network requires that the Time Capsule be connected to a simple modem.......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
Can you provide the make and model number of the device that you call your "modem", so we can check on compatibility with the Guest Network feature?

Similar Messages

Guest SSID not working

Hi all, im trying to configure the MSM760 to work with Guest SSID via HTML authentication.im facing the problem that i can get IP address, i can ping to outside, but i cant open anything in the broswer, it seems there is DNS resolving issue.anyway.i have disconnected this controller from teaming yesterday, and the team works with two SSID's1. NPS SSID which is used for Domain users authentication2. HTML uses authentication the NPS SSID was always ok, but the Guest was not working, and as i understand from some reading in here that the Guest SSID will not work properly in Teaming.so i disconnected this Controller and and changed the management IP address to new range. and started to test but i didnt get success with browsing.also the NPS authentication on it stopped and i cant get it to work. any advice? thanks in advance.

FYI this is for HP wireless product and networking not support another company product. For that you need to go to their support site and ask for further help from them.

I am having real problems with my hotmail account not working on my iMac

I am having real problems with my hotmail account not working on my IMac but works absolutely fine on my Iphone 5. Can anyone help with the setup for iMac. I am with BT for my Broadband. I am cionverned if I route my Hotmail accoutn to GMail will iy stop working on my Ipone.

How are you accessing Hotmail? Via your web browser? Are you using Apple Mail? Outlook?
The answer will be different depending on how you want to access Hotmail.
If you are using an email client (like Apple Mail, Outlook, Entourage, etc.)) then you need to set up a mail account in your email software.
The incoming Hotmail settings are these:
Incoming server: pop3.live.com
User name: Your full Hotmail email address (aka "me @ hotmail.com" or "me @ live.com")
Password: Your Hotmail password
POP port: 995
Use SSL to connect : yes
The outgoing Hotmail settings are:
Outgoing server: smtp.live.com
User name: Your full Hotmail email address
Password: Your Hotmail password
SMTP port: 587 (override the default port if necesssary)
Use SSL to connect : yes

Guest user not working at all (Mavericks Ver.10.9.4)

I am currently using a 2011 MacBook Pro running OS X Mavericks Version 10.9.4.
I'm having an annoying problem regarding the guest user, I just can't seem to get it to work. I got to User and Groups in the System Preferences, check the box "Allow guests to log in to this computer" and it doesn't work. I've tried turning it off, restarting my computer, then turning it back on and yet the guest account still doesn't show up in the login page or in the faster user switching menu. It's crazy how there's barely any information on how to fix this. I've searched google and the only results are how to enable guest user or how to get rid of it, nothing pops up on that the guest user is not working so I've come to the Mac community to see if I can get any help here. I have updated everything in my software update by the way.

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
dscl . -list /Users | grep Guest | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting.

Game center account not working on multiple devices.

My game center account works fine on my iPad 2, but when I log in on my 3GS (after logging out on my iPad 2) my iPhone can't receive invites and invites that I send do not work when the other player accepts them, it just says "waiting" . All of my push notifications are turned on and I can play with random people online, but I can't play with friends or even receive invites from them. But if I log out of my iPhone and log in on my iPad the account works just fine.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Substitution for "Cost of sales Accounting" not working with cycle-trx KSC5

Hello togehter,
I have a problem that it seems that a created Substitution for "Cost of sales Accounting" is not executed in our System when running a cycle for Indirect Activity Allocation (Trx. KSC5).
Now I want to debug the Indirect Activity Allocation but I don't know how those Substitution Steps are generated as code that I can set a breakpoint when executing the cycle with Trx KSC5.
I want to try a trace when activating the substitution with transaction OBBZ but I'm not able to analyze in which Forms/Functions the Code is generated.
I also saw some OSS Notes that there are problems with "Cost of Sales Accounting" but I don't know concretely what to do to solve that special problem.
Kind regards
Udo

thanks for your answer.
I added the filed FKBER in table VWTYGB01.
Now I can select field "functional area" for CO Substitution.
nevertheless substitution does not work and set functional area on Dummy FB 9990 for CO postings to CO-object without Functional area.
Thats curious because I maintained exactly the same Substitution on an other SAP System (IDES Test System) and here it works.
Any ideas?
Are there further settigs required after maintenance of table VWTYGB01??
Thanks in advance

Nokia Messaging: MSN accounts not working

I have some MSN accounts and I cant sync in Nokia Messaging since last Monday.
This is the same problem as the Hotmail accounts?
Nokia N8 / N9 / Lumia 920 White

I cannot sync my phone with Nokia messaging service since 01/10/09. Recently, I got a message from Nokia that Nokia Messaging Service Trial period is going to be over on 30/09/09. So, now NMS is not working. Does anyone have same situation. Does anyone know when it is going to start working.

Why do pop email accounts not work with mountain lion?

Since downloading mountain lion none of my pop accounts will work. Says they are offline.

this is the repsonse form Ambrosia: (Not sure I understand it)
As far as Snapz Pro X 2 functionality, some major backend Digital Rights Management changes enacted by Apple may be what is preventing you from recording movies you were previously able to record using our software. Basically, our program can no longer access videos before the DRM protections are enabled, unfortunately we have no control over these changes. Please see the following FAQ:http://www.ambrosiasw.com/support/faqs/products/snapz-pro-x /Why-does-the-content-of-my-capture-display-as-a-checkerboard
BTW I am current on the latgest version.
Does anybody know how to work around my problem? I need to be able to record videos on my computer.

POP Email Account Not working after update to 1.1.1

After I updated to 1.1.1, I noticed my email wasn't working quite right, so I did a complete restore, and in the process of setting everything back up, I can not get my personal pop email account to work. After creating a new account with the "Other" option, I enter all the correct information, and when I hit "save", I get this message: Secure Connection Failed, Certificate for "Personal" may be invalid.
It then gives me the option to Cancel or Continue, but hitting continue just hangs. Any thoughts? It was working properly before the update, and my desktop client is still connecting and receiving emails, so nothing has changed on my ISP's end.
Thanks,
Kenton

Given that other posts mention two prompts: first that "certificate may be invalid" and second "would you like to connect without SSL?" (paraphrase), I decided to hit "continue" on the first dialog and see what happened in my case. After doing so, I was NOT prompted a second time, so it would SEEM that my SSL connection completed normally after all. For others in this circumstance who require/demand SSL, you may want to try continue on the first prompt to see if it just works.
By all appearances, I still have a secure pipe to my email. It's a shame that this prompt and the results of "continue" aren't better at indicating what the actual issue is.
Note that in my case, I'm probably prompted about the certificate because I don't have a globally-signed SSL cert. I am just using one that I created myself and imported into the Mac OS X keychain. This cert was sync'd beautifully (thank you Apple!) to my phone originally, and appears to still be working. A check of the mail prefs on the iphone still show both inbound/outbound mail to have SSL "on" so it doesn't appear to have been disabled by 1.1.1 or by my pressing "Continue".
I believe that this 1.1.1 update was a deep enough update of the OS that it is merely warning me again (in an unfortunately cryptic way) that the certificate is not signed by global cert authorities. I think it did the same thing when I first set up the iPhone (1.0) but hasn't prompted me again like this on any updates since.

Setting up email account not working

i went on my blackberry and set up my email account and nothing happened. no email icon on home screen, no emails, nothing. then i tried getting a new service book and registering by going options-> advanced options-> Host Routing Table -> register and then reset my blackberry again and set up the email account again and it still doesnt work. i even tried setting it up on the website and it says "a email icon should appear on your home screen" but nothing appeared. I have a data plan so im sure i can set up a email but its just not working. I googled all the instructions online and tried them all at least once and none of it works )= any suggestions or new ideass?
thx in advanceeee

oh days? lol, it should happen with a couple hours at the most.
Are you certain you've got your device PIN registered on your service provider's network?
I would suggest you double check with them that ALL is correct and your plan is correct. It must be if you are able to login to your BIS BlackBerry account site.... but still, if not email is setup after "days" you've got some larger problem.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

EA4500 Guest Network not working

A few days ago I saw there was an upgrade for my router. I clicked on it and away I went. Since updating my guest network isn't working. My android and Kindle HD find the guest network, attach but no prompt for password ever shows up like it did before. The web page will time out and die. Does anyone have a clue why my devices don't prompt for a password anymore?

cperficio wrote:
A few days ago I saw there was an upgrade for my router. I clicked on it and away I went. Since updating my guest network isn't working. My android and Kindle HD find the guest network, attach but no prompt for password ever shows up like it did before. The web page will time out and die. Does anyone have a clue why my devices don't prompt for a password anymore?'i clicked on it and away it went' could be the problem. as much as linksys would like to think it works that way, it has been shown time and time again that the best way to update is to:download the update file to a pc with a wired connection factory reset the routerflash the file from that wired pcfactory reset againconfig from scratch not a backupyou might try to do a factory reset and config and see if it clears the issue. also on those devices that are not working try forgetting the connection and connect again.

Guest Network not working in latest Airport Extreme

Just bought the latest Airport Extreme (802.11ac), and want to enable the Guest Network.
- Installed latest firmware
- Set Airport in Bridge Mode
- Enabled Wireless Network
- Enabled Guest Network
There is no connecting to Guest Network (iphone) and if possible (macbook) there is no internet.
With a previous version of Time Capsule, the Guest Network in the same setting worked like a charm.
Anybody seen this before or is the Airport Extreme working different than a Time Capsule?

According to the theory what you are saying about the A1355 is not possible.. ie there is no guest in bridge.. I have tested it and can assure you it did NOT work.. it fooled me into thinking it should and I spent many hours working on it.. our forum expert here.. Bob Timmons set me straight.
Now I am always a believer in voodoo and gremlins and maybe the tooth fairy when it comes to wireless.. it is about 80% of the above and 20% science.. so please do the test again and see if it is possible.. but I can assure you.. apple have set guest network to off in bridge.
There are ways around it.. complicated methods. ie if you extend wireless to your TC.. from another apple router where the router is on, then guest can be used. You can also use a managed switch to set vlans for the guest.
See the following which I used to research this topic.
Guest network in bridge.
https://discussions.apple.com/thread/2815541?start=15&tstart=0
https://discussions.apple.com/thread/3617532
https://discussions.apple.com/thread/5247107?start=0&tstart=0
https://discussions.apple.com/thread/4787934?start=45&tstart=0
https://discussions.apple.com/message/23127620#23127620
Good Luck.. !!

Guest WiFi not working with DHCP disable

Hello,
I am using my "server" for handling DHCP requests, in the past i used my router to perform this task.
After disabling my DHCP server on the router i found out my guest WiFi is not working anymore. It seems it keeps searching for a DHCP server to get an IP but i am not sure whether this is the problem.
Could someone help me with this problem and hand me a solution or alternative, i really would like my guest wifi to work.
Thanks in advance.

Not sure when or if it will be. You'll need to keep an eye on main web site for udpates and release notes. This may not be fixed as Guest WiFi may depend on DHCP to be enabled. It will be up to Linksys to figure this out.

Premium account not working-purchased last night

I am new to Skype. I purchased a premium account last night so I can make call to family. I can not get my account to work. Half of the time it shows my premium account the other half it doesn't. When I went to set up and choose my country of choice for call it keeps bringing up a error message.

Hello and welcome to the Community,
please contact Skype customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

E-mail account not working since Z10 software update 10.2.0.424

I’m having a technical issue with my company e-mail account on my blackberry device. The phone had recently updated [5-days ago] its operating system to version 10.2.0.424
Ever since the software update, I have not been able to send or receive any e-mails on my work email account. But my gmail account is working normally on the phone.
I deleted the account completely from the phone and tried to reconfigure it, but the message is always the same: “The server for account XXX – [email protected] [mail.xxx.com, port: 143] can't be reached. The settings might be incorrect or the server could be temporarily offline. Check your settings and try again."
Our company's web-mail is provided by Bluehost and i have checked and rechecked that the configurations match the specs instructed by Bluehost. Moreover, these are the exact same settings I was using on the phone before the software update and it was working fine.
Please advise.
Thanks,
Joe

Hi,
I am having the very same issue, and also done everything you have said.

Guest account not working

Similar Messages

Maybe you are looking for