Guest account with the Cisco connect e2000 router

When switching to the guest account  it does not ask me for a password or is this password for computers not on the normal connecting

When you try to connect to the Guest Network, it will display you as a Unsecured Wireless Network and it will not ask you for the password. But once connected to the Guest Network and when you open Internet Explorer and try to go online wirelessly that time it will prompt you for the Password. Input the right password then you will be able to go Online wirelessly.

Similar Messages

  • Making a VoIP call with the Cisco 837 ADSL router

    I would greatly appreciate if could please provide some technical assistance to my questions below:
    Is it possible to make a VoIP call between two 837 ADSL Cisco routers over a 1Mbps ADSL broadband connection?
    If so, can I configure this VoIP connection using either a PPPoE or ATM WAN link?
    Is it possible to make a VoIP call using a Cisco 837 Router while simultaneously surfing the Internet? In other words do I need two public IP addresses i.e. one for accessing the internet and one for making the VoIP call or is one static IP address obtained from my ISP sufficent.
    It is possible to configure QoS parameters (e.g. RSVP, Voice precedence, Voice codec selection) on this 837 router using PPoE or can it only be done using an ATM WAN interface?
    Does the Cisco 837 router support both the H.323 and SIP communication protocols? Do I need to purchase a certain IOS operating system version for VoIP calling?
    Does the VoIP dial peers need to be configured with both a POTS and VoIP phone numbers or is only one number required?
    Do I need to obtain a special VoIP number from my VoIP service provider? or can I use existing POTS numbers or made up numbers within the dial peers as this situation involves making a private VoIP call between two branch offices using 837 ADSL routers and not via a VoIP service provider.
    Finally, can I use POTS ordinary telephones with the Cisco 837 for making VoIP calls or do I strictly need to purchase VoIP phones?
    My apologies for the number of questions asked here but I currently need to know the technical ability of the Cisco ADSL 837 as I am thinking of employing these routers in my company organisation.
    I await your feedback in due course.
    Thanks,
    Martin Healy

    Hi,
    I give you a sample config of my router.
    class-map voice
    match access-group 101
    policy-map mypolicy
    class voice
    priority 128
    class class-default
    fair-queue 16
    ip subnet-zero
    gateway
    interface Ethernet0
    ip address 20.20.20.20 255.255.255.0
    no ip directed-broadcast (default)
    ip route-cache policy
    ip policy route-map data
    interface ATM0
    ip address 10.10.10.20 255.255.255.0
    no ip directed-broadcast (default)
    no atm ilmi-keepalive (default)
    pvc 1/40
    service-policy output mypolicy
    protocol ip 10.10.10.36 broadcast
    vbr-nrt 640 600 4
    ! 640 is the maximum upstream rate of ADSL
    encapsulation aal5snap
    bundle-enable
    h323-gateway voip interface
    h323-gateway voip id gk-twister ipaddr 172.17.1.1 1719
    h323-gateway voip h323-id gw-820
    h323-gateway voip tech-prefix 1#
    router eigrp 100
    network 10.0.0.0
    network 20.0.0.0
    ip classless (default)
    no ip http server
    access-list 101 permit ip any any precedence critical
    route-map data permit 10
    set ip precedence routine
    line con 0
    exec-timeout 0 0
    transport input none
    stopbits 1
    line vty 0 4
    login
    voice-port 1
    local-alerting
    timeouts call-disconnect 0
    voice-port 2
    local-alerting
    timeouts call-disconnect 0
    voice-port 3
    local-alerting
    timeouts call-disconnect 0
    voice-port 4
    local-alerting
    timeouts call-disconnect 0
    dial-peer voice 10 voip
    destination-pattern ........
    ip precedence 5
    session target ras
    dial-peer voice 1 pots
    destination-pattern 5258111
    port 1
    dial-peer voice 2 pots
    destination-pattern 5258222
    port 2
    dial-peer voice 3 pots
    destination-pattern 5258333
    port 3
    dial-peer voice 4 pots
    destination-pattern 5258444
    port 4
    end

  • Lobby Admin Guest Account with Two Controllers

    I have two 5508 WLCs.  Both have APs attached to them.  If I create a guest account with the lobby administrator on one, will that user account be able to log in to the network if the client is attached to the ohter WLC?  So far, I have found that I need to create the same user on both WLC's, in order to have the user login.

    No, if you create the Lobby Admin on the WLC it does not cross over to any other WLC>
    Now if you had WCS/NCS you coudl create the user there, and it would be able to push to both WLC.
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

  • EA4500 - How do I change the email account the router is associated with in Cisco Connect Cloud?

    I have an EA4500 runnign the latest firmware that supports the Cisco Connerct Cloud and I need to change the email account the router is associated with. How do I do this? (Online Help does not explain.)

    jrosenbl wrote:
    We plan to deploy over 350 of these routers across the country. In our situation, it would not make sense to associate all these routers with one email account or even, at the other extreme, a separate email account for each router. In addition, you have created a management nightmare for us if we pursue this option, because anytime we need to make a change to the email account associated with the router, we would need to re-configure it manually. We need to manage these routers separately and outside of the Cisco Connect Cloud option. I understand that I can downgrade the firmware to the prior release, but this is a temporary fix (eventually security vulnerabilities will be discovered that will force a firmware upgrade - in fact, you have already had one) and I would like to request an option to manage the router outside of the Cisco Connect Cloud email associations. Will this be possible in the near future? Otherwise, we will need to consider another vendor for this project.
    Hopefully this should be possible in the future.
    I believe that I can make it

  • I replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

    i replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

    Hi Eric,
    What message do you get when you try to connect?
    Cheers!

  • An error when trying to connect with the Cisco AnyConnect.

    Good day!
    I connect from Windows 7 (also from Ubuntu) with the Cisco AnyConnect client 3.0 (and with Cisco AnyConnect Secure Mobility Client 3.1) and  get error a “The VPN client was unable to successfully verify the IP  forwarding table modifications. A VPN connection will not be  established.   No changes had been made to the  configuration  of my  asa5520 running 8.4(2) (ASDM 6.4(5)).
    I have license  (AnyConnect Premium Perpetual) supports 2  vpn connections.
    I read about this problem on different forums and cisco.com:
    disabled unused adapters, check install software (Adobe photoshop and Bonjour are not installed on my system).
    I made new configuration AnyConnect  in ASDM. But the problem remains the same...
    Please, help me find the way to solution in this situation!

    I have seen that error before but it usually clears up on its own.  I have a working theory though so perhaps this might help you.  I noticed that once you connect, 2 files are created in C:\ProgramData\Cisco\Cisco AnyConnect VPN Client.  I think that folder is different if using v3.x instead of 2.5.  Anyway, the files are routechangesv4.bin and routechangesv6.bin.  Try deleting each and then rebooting.  Try connecting again after that.
    My theory is that those files are not clearing up after disconnecting.  I think they are supposed to go away after disconnecting but I noticed in some cases that they don't.

  • Is it possible to purchase replacement Flash Card that came with the Cisco 1811 Router?

    I am in desperate need of a replacement Flash card that came included with the Cisco 1811 Router. I purchased the router used and it was working perfectly. I worked my way through all the information provided at cisco.com and had it pretty much configured the way I wanted it. Until the flash card got destroyed. A little embarassed to go into details how it was destroyed, let's just say my Grandson gave it a bath.
    It would be great if I could just purchase a replacement somehow with the IOS and SDM on it without purchasing a Cisco Service Agreement, etc. I purchased the router just to further my "Self Education". I have pretty much conquered all the aspects of the Cisco routers, etc. more or less developed for the Home Office user and moved on to bigger and better things. Since I was able to find a Cisco 1811 in good working condition very inexpensively I decided to go for it.
    Help from anyone would sure be appreciated.

    “Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main  This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.”
    - Routers ----> Network Infrastructure Forum http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Network_Infrastructure_discussion

  • Remove guest access without using 'cisco connect'

    Hi all,
    I just installed a new Linksys E3000 and was able to use "Cisco Connect" up until I decided to forgo the "Wi-Fi Protected Setup" and use manual settings.
    Well, after having done this, I can no longer use Cisco connect, and I really want to get rid of the additional "-guest" network which seems to be tagged onto my main network.  Is there anywhere via the browser-based admin that I can get rid of the guest access feature?  If there is, I can't seem to find it.
    I tried switching back to the  "Wi-Fi Protected Setup"  feature so I could go back to using connect, however it no longer seems to see my router when I try to connect to it, so this is no longer an option for me.  I'd really like to avoid reinstalling the router all over again.
    thanks for any info.

    If you have configured your Router using the Cisco Connect software, then you it secure your wireless network with an password. If you have any firewall and antivurs software on your router then it will protect your computers against worms.
    To use the FTP feature of your router you need to enable ftp login on your router, which you will find under the storage tab of your router.

  • E3000 FTP access question/using Cisco connect after router setup

    I have two questions about my E3000 router.
    1. If I have already set up my router using the default web address, if I use the Cisco connect software, do I gain any benefit or am I opening up a can of worms? I would like to change my server name and default admin user name stuff, but I don't want to screw with any settings I have. I will be updating my firmware in a day or so, so should I use the software then, or just go about it the way I have already?
    2. I have enables FTP access for my USB drive, but I am unsure how to access it from a remote computer. I know using ftp://xxx.xxx.x.x gets me to my Index while connected to my network, but how do I access this off my network? I want to give our parents and family access to pictures, but I''m not sure of the exact address to use. I have looked in the set-up manual, and searched Google and this site, and have found nothing.
    Thank you in advance for your help!
    Dan

    If you have configured your Router using the Cisco Connect software, then you it secure your wireless network with an password. If you have any firewall and antivurs software on your router then it will protect your computers against worms.
    To use the FTP feature of your router you need to enable ftp login on your router, which you will find under the storage tab of your router.

  • How do I install a new Exchange account with the same address as my old Exchange account and have my bcc mail not go to the old account?

    I have an iPhone 5s running iOS8 and an iPad, up to date.  I have recently changed my mail server but not my email address.  My "old" mail account is an Exchange account and I have also set up a "new" Exchange account with the same address but with the new mail server details.  When I receive outside, third party emails they are routed correctly to the "new" Exchange account but when I bcc myself or receive other emails from any account with my domain name the emails are routed to my "old" Exchange account.  I have changed the default account settings to the "new" Exchange account.  Also, if I send myself an email from my laptop, through the new mail service provider, it is routed correctly on my laptop but incorrectly on my iPhone and iPad.  It appears as though the Apple products have cached my email address and routing and won't look to pick up the new mail server details. I don't see anything in the mail account settings or contacts that allows me to refresh or clear the cache.  The result is I now have mail in 2 accounts. If I can get the misdirected mail from the odl account to the new one I will then make the old account inactive.  Anyone have any ideas on this one?
    Thanks in advance for your time and ideas,
    DAA

    Can you set up a rule in your old account to forward mail to your new account and then delete it from the old account?
    (1012)

  • I already have an Apple ID account with 4 devices connected to it but I would like to make a new one with a desperate password for my school iPad. How do I do that?

    I already have an Apple ID account with 4 devices connected to it but I would like to make a new one with a desperate password for my school iPad. How do I do that?

    You can create a new Apple ID and password for the iPad but none of the content downloaded using the Apple ID associated with the four devices will be available on the iPad.
    Create new >   Apple - My Apple ID
    It's not possible to use two passwords with one Apple ID.

  • Satellite A660-13T - I can't go from 65 Mbps with the wireless connection.

    +Sorry for my English, is not my native language.+
    Hi,
    I expose my problem:
    I can't go from 65 Mbps with the wireless connection. I can't move from that connection speed.
    Laptop configuration:
    * Windows 7 Ultimate 64 bits (with all updates installed).
    * All drivers updated properly.
    * With the latest version of BIOS.
    Router:
    * Tp-link TL-WR1043ND, installed 3 meters above the laptop (without obstacles).
    Configuration of router:
    * WPA2-PSK AES.
    * 802.11n
    * Maximum output power.
    * Channel: 11 (not automatic, this channel is relatively free).
    * Channel width: 40 Mhz.
    * Maximum tx rate: 300 Mbps.
    Other information:
    * The wireless card drivers are correctly then updated (ver. 5.60.48.35).
    * The router has updated firmware.
    * I have tried all settings of the wireless card.
    * Bluetooth off (without interferences).
    * {color:#ff0000}There are other computers on the network that connects 150 and 300 Mbps (with the same network configuration).{color}
    Thanks in advance,
    Greetings.
    Message was edited by: Xibalba

    Hi buddy,
    > I kept O.S. original for a week and the problem was the same
    If you had the same problem with factory settings you should test another router. Maybe its a malfunction of router or something else (not compatible to your WLAN card).
    Furthermore ask the manufacture of your router if they know something about this.
    In worst case its a hardware malfunction of your notebook. You should contact nearest service centre. I believe they can fix it under warranty, because A660 is pretty new notebook.
    Good luck! :)

  • How do I share itunes will a guest account on the same computer?

    I am trying to give a person within my house hold access to my computer, without giving them access to my personal files. However, I would like to share my itunes library with this individual. How do I share my library with my guest account on the same computer, without sharing everything else?

    iTunes: Setting up Home Sharing on your computer

  • I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

    I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT5624 Restore back up of my iPhone-password not recognised. After restore, itunes can not restore because it says the password is incorrect. But I can sign into my apple account with the password.

    Restore back up of my iPhone-password not recognised. After restore, itunes can not restore because it says the password is incorrect. But I can sign into my apple account with the password.  My iPhone is now set to factory settings as a new phone, what can i do to access the back up from my phone before I reset it. 

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

Maybe you are looking for