Guest Grub Error 18 when VM starts only on Server 2

Hi all,
I have a Linux RedHat Virtual Appliance.
The VM perfectly works on the VMware player for windows, and also on an ESXi Infrastructure.
When I try to play it on VMware Server 2 (linux or windows) at boot time grub signals ERROR 18, concerning the cylinder size.
On other host I tried it, the VM starts without any issue by GRUB.
Any idea??
Is there some BIOS setting coming from the HW version of the VMware Server 2 machines??
Thanks in Advance

Similar Messages

TS1389 I have the error 42111 when I start iTunes.

Hello, I have the error 42111 when I start iTunes. I did not download a movie, I just installed the newest version of iTunes. I reinstalled but that didin't help. What can I do? I have Windows 8.

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What ?

I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What does it means please provide me solution ASAP

Israr,
Then error indicates that the primary battery (the one you can remove and replace) has a hardware failure. You should run Battery Check in HP Support Assistant.
Wes
I am an HP employee.

HT1926 I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start. I verified that I have admin privileges. Can anyone help?

I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start. I verified that I have admin privileges. Can anyone help?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Communication error occurred when trying to connect to server

I am using RAS SDK to connect to the BO server. While running the report for performing opendocument, it's giving the following error.
Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0 completed: No
detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0 completed: No
     at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
     at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
     at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
     at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
     ... 38 more
Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0 completed: No
     at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
     at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
     ... 52 more
Please help me to solve the issue

Using BO SDK i am connecting to the BO Report Server, to fetch the BO Reports, But while trying to run the report, i am getting the following error.
Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
... 38 more
Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
... 52 more
Please someone help me with the following issue.

Windows keeps giving me "itunes has stopped working" error message when I start itunes? How can i fix this?

After downloading the newest version, 10.6.1, whenever I open itunes I almost immediately get a "itunes has stopped working" error messsage, in which the only option is to hit the "close the program" button. Simply closing the error message closes the program as well. I am operated under windows XP with the latest updates (or so the updater tells me). It seems like its getting stuck trying to send me a new user agreement because dont you have to agree to one for every new update? It just can't seem to get past that point. I tried opening it up in safe mode but that didnt work either. Any help would be greatly appeciated.

Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo

Getting error message when Firefox starts

I am getting the following message when I start Firefox ever since I upgraded to the newest version (4.0.1). This is what it says:
what happened: TypeError: Components.classes[@mozilla.org/extensions/manager;1’] is undefined
Firefox doesn’t load until I click the OK button in the message. What is causing this?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

Error message when clicking "Update" in the server options on ServerManager

Hello,
I have a strange error message when I want to modify the server options through the Server manager component (BPC for MS 7.0 SP5).
Here is the error message :
"Cannot update server options.
Err: Cannot connect to the web server registry. Make sure the [Remote Registry]service on the Web server has been started.
To check the [Remote Registry] service, go to Start/Settings/Control Panel/Administrative Tools/Services."
I checked the service mentionned in the message, nothing to be signaled : the service is running, I tried to restart it and test again but the error message still remains.
In fact, as we are in a BPC Server loadbalancer environment (2 BPC servers), we enter (try to enter), the virtual host name of the NLB in the fields (External Server Name, Application Server Name etc...), and we noticed that if we enter the physical Server names in the fields, the Update works fine !!!
As soon as we try to fill the NLB virtual name -> error message with the update.
As workaround, we updated the server information directly in the tblserverinfo sql table. Once done, the NLB with BPC works perfectly.
Do you have an idea about this error message ?
Thank you very much in advance.
Kind regards,
Lionel

Hi,
External server name is used only in case you have users who access the BPC outside LAN. In this case the external server name should contain the virtual name which is visible for those users.
Scheduler server is the server used to schedule the BPC jobs (windows jobs are created into Windows scheduled tasks).This parameter should be the name of one application server(not NLB)
Regarding Server Manager, it is true that it is increasing the number at the end of parameter and saving all the values. This was created by design. Normally the last value saved is used(the bigger number),
Hope this can help you,
Mihaela

SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123

Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support

When i start the report server it say starting then it say shutting down

i received this message everytime i start the report server
starting then shutting down
this happen after i did remove the server from the domain and re-join it again to the domain
please help

Hello,
The best method to diagnoze this kind of problem is to activate the Reports Server trace
Edit the file $ORACLE_HOME/reports/conf/<reports server name>.conf
Modify it in order to have a line :
<trace traceOpts="trace_all"/>
Then, restart the reports server.
The trace files will be generated in $ORACLE_HOME/reports/logs for Reports 9.0.2
or in $ORACLE_HOME/reports/logs/<reports server name> for Reports 9.0.4
Regards

Error when re-starting an SQL Server Instance from VBA - [SQL-DMO]Service Control Error: Access is denied.

Our Application needs to have the use of the [Named Pipes] and [TCP/IP] Protocols. To save our Users the hassle of having to enable them manually our application has always done it for them and then stopped and restarted SQL Server. However
since the advent of Vista and Windows 7, the restart stopped working. We solved the problem by detecting the failure to re-start and giving Users sufficient instructions for them to do it themselves. Since this only occurs during installation on
the Server, this approach has not been too much of a hassle. However we would like to tidy this up if possible. This the VBA code that is causing the problem:
    obj_SQLServerInstance2.Start _
        g_SQL_UseWindowsAuthentication, _
        SQLServerInstance, _
        UserName, _
        Password
This still works when run under XP, but fails under Windows 7 with the Error:
[SQL-DMO]Service Control Error: Access is denied.
Does anyone know how to resolve the problem?

This still works when run under XP, but fails under Windows 7 with the Error:
[SQL-DMO]Service Control Error: Access is denied.
Hello Brian,
Under Windows 7 you have to run the VBA script with admin permission, a normal user don't have permissions to start/stop services.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error Messages When Burning / Disk only plays in certain DVD players

When burning most all of my DVD's in DVD Studio Pro, after all of the encoding in the burn process and the program starts the initialization, I get a Media Error Calibration Error message. When I retry to burn, everything seems fine. But, my DVD's only play in some DVD players. Others say unreadable disc. Any ideas?

Many times, media can cause your problem, I use Maxell myself, (never had any compatibility issues. Here's a URL to a site that rates the quility of many different kinds of media and there reliability.
It also includes alot of very useful info below the ratings area.
URL: http://digitalfaq.com/media/dvdmedia.htm
G5 Quad Core 2.5GHz & G4/1.2GHz Dual 6GB RAM Mac OS X (10.4.5) [storage] X RAID's : [capture] Io : [decks] Betacam SP, S-VHS, DSR-11

Error message when i start iTunes 7...HELP PLEASE!!

whenever i start up itunes 7, i get an error message, and the details read:
This error report includes: information regarding the condition of iTunes when the problem occurred; the operating system version and computer hardware in use; your Digital Product ID, which could be used to indentify your license; and the Internet Protocol (IP) address of your computer.
PLEASE HELP! I JUST GOT MY iPOD TODAY AND I FEEL LIKE I'VE JUST WASTED $250!!!
Windows XP

OK first we will see if the issue is on the PC side and not the iPod. Uninstall iTunes,Quicktime, and the updater from control panel>add/remove. Uninstalling iTunes will not delete any playlist, songs, ect ect.
Then run chkdsk in windows to correct any lost or damaged system files. To do this goto "My Computer" rightclick the harddrive (Usually C Drive) Select properties>Tools tab and under "Error checking" hit check now. In the following window that appears, put a check beside "Auto fix file system errors" hit OK then hit yes in the next window. Reboot and after the check is done it will boot back into windows
Now disable any antivirus/security/norton/mcafee products then download/install the latest iTUnes here http://www.apple.com/itunes/download/ and iPOd updater here http://www.apple.com/ipod/download/
If this does not work check the system for malware (General term for adware and spyware) with Ewido, this program tends to catch alot of malware that messes with iTUne and iPod software http://www.ewido.net/en/download/

I get an error message when I start up itunes. It says the registry settings for burning are missing and to reinstall itunes. Well I have done that and it doesn't work! Help

When I run diagnostics I get error 43 telling me to repair install itunes and that doesn't work either.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

An error message when iTunes starts up.

Lately when my iTunes start I get the following error
message.
iTunes Setup Assistant
Warning!
The registry settings used by the iTunes drivers for importing and
burning CDs and DVDs are missing. This can happen as a result of
installing other CD burning software. Please reinstall iTunes.
I tried to reinstall, but I still get the same error message. It doesn't matter much, I'm not using the iTunes
to burn CDs, just trying to get the message to stop
popping up everytime, keeps the iTunes from starting
automatically when I connect the iPod. Thanks.
me.

What other burning software do you use on your PC? There is a reason why this happens. When an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some people, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists...
First, I would tell you to go to your computer manufacturer's website and download all new driver's for your optical drives. Run CD Diagnostics in iTunes and post them here if you still have problems. Here is an Apple Article that discusses this issue:
http://docs.info.apple.com/article.html?artnum=302976
There are other work arounds as well if you want to know that. Post back if you still have problems.
Rachyl

Guest Grub Error 18 when VM starts only on Server 2

Similar Messages

Maybe you are looking for