Guest ldom network issue - Need help please

I have a T4-4 sparc server and the SO is Solaris 11...
We have 2 Qlogic/Sun FcOE 10Gb cards
Network is configured as follows:
1. The two ethernets are aggregated
2. Created Vlana dn have vlan id
3. vswitch is presented to the guests as vsw0 and vsw1.
After configuring the guest's network, guest can not reach the default gateway.
Any help is appriciated. ( all the guests are Solaris 11)

We'll need some data... Could you please post the output from the following commands (in the control domain):
ldm -V
ldm list
ldm list -l
ldm list-services
And from both guest domains and the control domian, please issue:
dladm show-phys
dladm show-link
ipadm show-if
ipadm show-addr
netstat -r
ifconfig -a
That will show the network configuration so we can see what's up. Also - did you plumb the vsw onto the physical interface? That was done with Solaris 10 control domains, but is no longer needed.
regards, Jeff

Similar Messages

Hp laserjet 4015 network issue need help

hello and sorry if you all seen this already, i did this post yesterday but its not showing up and my info is not showing i did the post.
ok here's the deal. i have a hp laserjet p4015n printer. right now its connected to a network and every pc thats on the network can see it and print to it etc.
however the current internet package is too expensive and i am planning on doing away with the current provider and goign with a different one. but i have to give them back the equipment.
so i am trying to get everything set up before i do that and i am having problems.
i can get everything else working just fine regardless of what router i use and on both the old slower brother printer is found and can print just fine but the hp printer refuses to be recognized.
i have two routers i have tried this with
a belkin n600
linksys wrt54g
with the linksys router when the printer is connected to it it shows as a device is connected as the light lights up solid but nothing i do can get the printer installed.
i can not ping the route either.
its connected to the router via an ethernet cable
the pcs on the network mostly use win 7 but one is using windows vista but none can install the printer.
i've tried installin gusin ghte host name and ip address
tried using hp's installation software but it just don't find the printer.
this is all driving me nuts and any help would be greatly appreciated.
thanks
ryan

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet. Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

New hard drive issues - need help please!

So I just installed a new hard drive on my Ideapad S10 and having the following issues. I get a PXE-E61 : Media test failure check cable & PXE-M0F : Exiting Broadcom PXE rom message. I've uninstalled and reinstalled the drive to check the connection and still get the error, it's a brand new drive. Also I noticed in the BIOS that the hard drive is showing up under ssd disk and SATA hdd shows - none. If I restore the BIOS settings to original then the drive will show up under ssd but the SATA controller mode will show the AHCI setting instead of the Compatible setting it should use.
I'm really stuck here and don't know what else to check. My orginal drive is dead so I'm trying to get this working so I can install windows. If anyone could help out it would be greatly appreciated - Thanks!

Full Disclosure: I don't know your machine.
That PXE error probably doesn't indicate a problem - or not the problem, anyway. Your machine boots, doesn't see an operating system on the hard drive (or doesn't see a hard drive at all) and tries to boot over the network and fails. That's what the PXE error is about.
As to the SATA problems, what happens when you boot your Windows install media? Does that see a hard drive?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Firewall Issues - Need Help Please

Hi
I'm new to Apple and love the machine, but I am having a problem with the firewall on my router. Let me explain the setup, then the problem...
I have the following in my home network:
1 hp desktop running Windows XP Media Center Edition, SP3 (Professional)
1 Belkin wired / wireless router
1 Canon Pixma MP500 Printer set for Sharing (Connected to hp desktop through USB)
1 iMac 20" running Leopard OS
The hp desktop and the iMac are both hardwired to the router. The router's security settings are as follows:
Will NOT broadcast the SSID
Mac Filtering is ENABLED
WPA-PSK Security ENABLED
Wireless connectivity is ENABLED (For Wii, PSP, and Xbox 360)
Now the problem...
Everything on the network works beautifully, except the iMac. It will not allow iChat services, will not allow sharing of the desktop with other iChat members. It does, however, connect to the internet, but will not access the hp shared folders or printer. When I attempt to even add the printer, the printer does not even show up. I DO have Bonjour installed on the hp, but when I run Bonjour, I get a message that reads something like, "There are no Bonjour enabled printers available."
I know it is the firewall built into the Belkin router because I placed the iMac into the Demilitarized Zone, and everything started working as expected. For those of you not familiar with DMZ on the router, it basically allows you to pick an IP address to place outside of the firewall, so you can keep the router firewall enabled, but you can choose an IP address (i.e., a computer) that is not behind the firewall.
After placing the iMac in the DMZ, I went to add the shared printer on iMac. Not only did it show up immediately and give me the ability to add it and print to it, but I could also browse shared folders on my hp. I was also able to connect to a friend on iChat, and we were able to share each other's desktops.
I can provide more information if needed, but any help on this matter would be greatly appreciated.
Thanks a lot.
Message was edited by: Wheelermdw
Message was edited by: Wheelermdw

I forgot to add that before I placed the iMac in the DMZ, I opened up some ports on the router that allowed iChat communication, so a comprehensive list of ports that need to be opened might solve these problems. I do not know where to find such a list, but I think that might work. If someone could provide a list, that would be great. I will update this post and let you know if the list was successful.

Ipod Classic 160GB having issues, need help please?

I am on vacation away from my home computer where my iTunes is. I turned on my iPod and scrolled down to Music and it showed "No Music." Went to "About" and saw that there were only 9GB of free space, so I felt for sure it was there because that's right at what I had when I last synced it, which was a couple days ago and it finished syncing with no problems. Went to the next "About" screen where you can see how much Audio, Video etc. etc. you have and it showed 0 Audio and The "Other" category had all the data in it. What happened to my music, and can I get it back on vacation without my iTunes on my computer at home? I tried the holding down of the Select middle button and the Menu button until the Apple logo appeared but that did not restore any Audio. Hope someone can help me out here.....Thanks

Solved my issue and thought I might do someone a favor by posting the answer. If you wind up with NO MUSIC and find all your audio files have been synced into the OTHER folder on your iPod such as what happened to me, AND if you happen to be unlucky enough not to have access to your computer where your iTunes program would allow you to re-sync your iPod, here's what worked for me in a Windows7 OS.
1.You will have to find a computer that has enough storage to hold the amount of information stored on your iPod. In my case, 139GB!!! Download iTunes if it is not already on the system, or if it is, update to the latest software.
2. Plug your iPod into one of the USB ports.
3. Open iTunes if it does not open itself.
4. Select your iPod from the menu on the left and you should get a message that iTunes cannot read the iPod. Simply close that box. If you get a message that syncing your iPod will erase all content then decline the sync.
5. Open Computer and you should see your iPod as an external hard drive.
6. Open it and you will see some folders and a few files. The folders will likely look like they are a washed-out yellow instead of a deep yellow like you're accustomed to seeing. That threw me initially because as I was looking for the folder with @ 139GB, it was not there. Right click each folder, go to Properties and check the "Show hidden files" in the View menu. After that, the folders will appear dark yellow and as you hover over each one, you will see one that will have the full amount of data that was on your iPod before the mess started. Open that folder and you will see a bunch of other folders with strange names, like F00, F01 etc. etc. Do the Edit, Select All, right click and in Properties, View menu, check the Show Hidden Files again. All the folders that were that light yellow color will now turn deep yellow. Be sure to select show hidden files not only for the folder but all sub folders and files box that will come up....forgot to mention that earlier. Now all your folders and the files in them will be readable by iTunes.
7. The folders will all still be selected. If not, select them and then do either a copy/paste into iTunes Music Library or drag them over into that pane. The process will begin and likely take quite a while. In my case, several hours. When it is done, you will see all your music in iTunes along with the album art if you had any.
8. Now you will need to sync your iPod to that library, but before you do, you will need to Restore it. Simply select it from the left menu and click on the Restore iPod option. That will only take a few minutes and it will wipe your iPod clean. Before you do that, it is a good idea to MAKE SURE YOUR MUSIC IS ALL THERE!!! I also went to about a half dozen of the albums and tried playing a few songs just to be double sure. Proceed with the Restore, and when it is complete change the iPod name that will be in the small box on the same page as the Restore option and likely be something like"karens iPod" (whoever the computer belongs to will be the name there) to exactly what your iPod is called on your iTunes on your computer that it was originally synced to. I found that before I did this, it would not sync.
9. When you hit Sync, be patient because it took a minute or so before it actually began to sync. Then, it will be another few hours if you have as much music as I did for the sync to complete and depending on the speed of the computer you're using.
That's how I got all my music back and I am now a happy camper/listener again.,
I called Apple support and they were absolutely no help. Just told me I would have to re-sync to my iTunes even though I kept telling them that was 1,650 miles away at my house and not going to be possible. I even asked if the above process would work and they said they didn't know but "You could try it....." :-( At that time, I didn't have access to a computer with enough hard disc space on it yet so I called the Apple store in Louisville, KY which was 65 miles from where I was hoping that they might be able to help. After 2 calls and getting hung up in the same loop of menus that left me on hold for over 20 minutes long distance, I gave up and concluded that Apple and Support are two mutually exclusive terms and have no relationship to one another. This has been quite a nightmare, and if anything good has come of it aside from having my music back, it might be the learning process but I really feel that is a rather small reward for the time spent!
Not likely to be an Apple fan when considering my next purchase of home computer, laptop, nor the phone I am preparing to buy.
Hope this has helped someone.
Fishead

Mail issues, need help please.

I am no pro with this.
Can someone tell me what the mail settings are for a 'Windows Live hotmail' account.
Eg: [email protected]
I don't know whether it is IMAP, POP or exchange...i'm guessing that's important though. And also the incoming and outgoing mail servers. If someone could help that would be awesome would also probably benefit quite a few people not just me.
Cheers

Hi olytigs;
WARNING I just received word from the IBM CERT Team that the security for Microsoft Live has been breached. Their recommendation is to have nothing to do with it until Microsoft is able to redo the security. At the present time the hackers are to defeat the Microsoft Live security one third of the time.
Allan

Macbook Pro weird issue need help please

Just updated this Macbook Pro 2.16 ghz to 3 gigs ram and installed Leopard. Screen won't show at all, is all black though the machine seems to boot. The OS disc is in the optical drive, though can't boot to it nor can it be ejected.
Strangest thing I've ever seen. Anyone have a thought on this?
Regards
Mike

You might try working through the steps in this article--hopefully the resets will help:
http://support.apple.com/kb/HT1573?viewlocale=en_US
If the disc won't eject by normal means, here is something else to try:
http://www.silvermac.com/2006/dvd-stuck-in-macbook-pro/
Good luck!

Here is my issue. need help please.

I had to format my drive and reinstall leopard. some of my purchased music are from an email I no longer have or use.
in itunes, double clicking many songs opens the password screen for this old itunes store account, and it wants the password I know longer have.
How can I get these songs to play again, or get apple to let me download them again?
how can I contact the itunes store about this?

You can recover a password for an iTunes Store account here:
https://iforgot.apple.com/
But getting into the iTunes Store with that account won't get you access to tracks you've lost. Officially Apple does not allow redownloads of purchased items. It's your responsibility to make backup copies in case something goes wrong with your system, as unfortunately it apparently did in your case, and you lose all the information on your hard drive. The official statement of their policy can be found here, among other places. If your hard drive was erased and you haven't made a backup or the tracks and don't have your tracks on an iPod, you're probably out of luck and will need to repurchase your content.
You can try contacting iTunes Store Customer Service and explaining what happened. Reportedly in some cases Apple has allowed redownloading on a one-time basis, but don't count on it.

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes

I had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

Having issues with low memory that is causing some of my apps to crash, need help please !!!

Having issues with low memory that is causing some of my apps to crash, need help please !!!

Is the device actually showing low memory errors?
What is really occurring?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Old Don needs help, please...

I have a BEFW11S4 wireless. Works fine for my wired PC. Have a guest trying to access with his Mac G4 and it is not accepting the password even though it is recognizing my network...help, please!

I am also facing the same issue with my mac computer ..... i tried using "$" sign before the network password .....it worked .....

Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200.
These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
I would guess your iphone has been hacked ( jailbroken ) ring any bells ?

I can not play any games on the new ipad 32 G wifi after take over to oversea , need help please

After I turn off Airplane mode and I want to play games when was downloaded before fly to oversea. I was palying all games on ipad before fly.
now when I turn on ipad and want to paly games but It can not play games on ipad.???
Anyone can fit it on setting?
Need help please.
Thank you.

OK. I am having a little bit of trouble understanding your responses, but let's start with this since you are having an issue with other apps as well.
Reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Let the iPad start up completely and then try again.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Guest ldom network issue - Need help please

Similar Messages

Maybe you are looking for