Guest login problem

When trying to access public wifi hotspots, if the hotspot requires a login the consists of "accepting terms and conditions, blah blah" my login screen just stays white. The phone keeps trying to gain access. If I am using my macbook I can log in to the site with no problems. It quickly brings up the login screen, I accept the conditions and start surfing.
If the "guest wifi" doesn't require a login then the phone works fine.
One of these sites is the hospital that I'm going to spend at least two weeks in starting Monday and I would love to use my iPhone and not bring my Macbook.

Is it all sites that require login, or on one? I use a lot of sites that require login, and I do not have this problem. If it requires login normally the login screen appears when I first connect, but if it doesn't I open Safari and go to any bookmark and it appears.
Go to Settings/Safari and make sure you have Javascript ON and Accept Cookies set to Always or From Visited. If they are already on try clearing cache and cookies.

Similar Messages

E1200 Guest Login Problem

I have an E1200 v1 (Firmware 1.0.03). I have it set up to provide wireless as NETWORK and NETWORK-GUEST using Cisco Connect. NETWORK works fine.
My understanding is that I 1) tell a computer or device that I want to use -GUEST to connect to the internet. 2) I open a web browser. 3) I am directed to a page where I can enter a guest password. 4) I enter it and am now on the internet.
Step 3 does not happen. I open a web page and simply go to my regular home page. I do not get an opportunity to enter a password.
More irritatingly, I am told I am connected to the internet but cannot surf anywhere.
I have managed to get the screen with my laptop, after fiddling with the Connections icon at the bottom right. But I haven't recreated it reliably.
I would like an easier way of dealing with this. Particularly something I can easily direct other people to. For instance, just having a URL for people to point laptops and smartphones to would achieve my aims.

I keep encountering the problem. I brought my laptop to the site, disabled and enabled wireless. Then I told it to connect to -Guest, which it did. Opened IE and went (as normal) to "companyweb." Tried several variants on the URL in the articles with no success.
One possible clue, the address of the DHCP gateway/router is 192.168.1.1 for computers on my system. However, according to the laptop connected to -Guest, the address is 192.168.33.1.
Asking for either 1.1 or 33.1 gets me nothing. (Specifically, it gets me an IE page offering to help me diagnose the problem, or an attempt to do a Bing search.) I get the same results appending ":10080/Block_GuestAccess.asp", which I derrived from the links hillary681 posted. Trying things like simpley "GuestAccess.asp" and "Block_GuestAccess.asp" also produce no new results.
The result of the IE diagnosis is "The remote device or resource won't accept the connection." Sometimes the wireless bars display with a yellow yield sign and the hover-text reads "no internet access." Other times the yield sign is gone and it reads "internet access." In both cases, browser behavior is the same.
I've reset and reconfigured the router once, having the same problem before and after. I'm pretty much mystified.
I borrowed a smart phone, and connected to the -Guest network. I was able to get a browser pointed at Google, but don't know if it went through my network or through the data plan. (Given I did not get a password page, likely the latter.)

Guest Cert problems ISE and Anchor WLC

I'm setting up new Guest Wireless, I have 2 internal foreign 5508 WLC's talking to 2 DMZ anchor WLC's. The guest connects to Guest SSID and the anchor controllers acts as a DHCP server, the Guest interface configured on the WLC is the in the range of the DHCP scope I've setup. The DHCP scope is using the anchor WLC Mgmt interface as the DHCP server.
Guest SSID - is setup for Webauth and Guest is redirected to the ISE server https://wlc.company.com/login...., when the page is presented to the Guest they get cert problem because the cert is not trusted (its an Internal Cert), Guest logins in ok and the AUP says "cert not trusted" 1.1.1.1 name of the WLC wlc.company.com.
In the browser Guest has https://wlc.company.com/loginredirecthttps://1.1.1.1........
1.1.1.1 is the Virtual interface of the Anchor WLC.
How can I get the client to stop using the Virtual Interface for cert. Why is the WLC doing this? I gather something to do with DHCP?
My plan is to apply a External Cert on the ISE for Guests, that way they will automatically trust a cert from Geotrust for example. But I'm going to still run into this Cert "not trusted" problem where the Guest is not trusting the WLC anchor Virtual Interface 1.1.1 . Why is the guest using the Virtual interface error 1.1.1.1. I've even added the ISE name of the cert to the Virtual interface, same problem, instead its just says wlc.company.com not trusted. I have also imported the cert onto the WebAuth cert on anchor WLC, still doesn't work.
Hopefully I've explained this ok.....any ideas? but if the Guest page keeps getting presented with
https://wlc.company.com/loginredirecthttps://1.1.1.1........ it will never work.

I followed Richard's advice and started from scratch, removing LWA and implementing CWA -MAB. It didn't take too long to setup CWA and get authentication working, I appled a Preauth ACL on WLC's and on ISE under Authorization pofile (CWA)
This is when the problems started happening, I was using the default ISE Authorization profile
cisco-av-pair = url-redirect=https://ip:8443/guestportal/gateway?sessionid=SessionValueIdValue&action=cwa.which is not what I want, again the certificate is the server cert which is not an external Cert that the guest wants to see. The user can login fine, unlike LWA, with Firefox or IE it would accept the cert and login so at least I had a working Guest wifi solution. Though there was a cert error symbol at the end of the browser url.
The next step I tried was to change the Authorization Profile to
(wireless.company.com which is a C-NAME for ISE box and has this Alias in the cert, this was a test before I apply the external cert)
cisco-av-pair = url-redirect=https://wireless.company.com:8443/guestportal/gateway?sessionid=SessionValueIdValue&action=cwa
I applied the change and the new page appeared on the users laptop, great, but this time users were declined access via live Authentications, reason "Cannot login due to session id expiry, please login a again", I created a new user a/c, same problem. Not good. Ok so I thought well if I want clear all these stale session id's that appartenly exist I'll stop/start the application which I did from the command line, still the same error "Cannot login due to session id expiry". hmmm, whats going on here.
I then rebooted the ISE (this must clear all the sessions!), reboot I performed from home and now for some reason I cannot login to the ISE front end GUI with the admin account or my account. Tried resetting the GUI password for admin and other admin users, the message "Error: cannot reset password this can only be performed on Standalone or Primary node" Well what have I done, just rebooted ISE nothing else apart from changing authorization profile. This box is a Standalone node. Without seeing if the clients connect due t no GUI access, I have referred this issue to TAC!
Also I don't like the fact that your have to install a external cert against the internal node name, epsecially when its external. But again I haven't reached this part yet.

SDDM guest login, transition to KDE Framework

Hi,
I am preparing the Transition to KDE Frameworks and as a first step I want to install SDDM, as suggested here.
Some time ago I set up an Ubuntu-style guest-account or guest-login with KDM/KDE4 and would like to keep that in SDDM. A home directory is set up on a temporary file system on kdm start (as root before login dialog appears, see below), and cleaned/recreated after each logout. I copied it from here. Now the question:
Is it possible to do that in SDDM?
There is an entry "Guest-login" on a TODO page of SDDM at github, which is about half a year old. So don't know if that has been implemented or not. Do you know?
Also, there is a Wishlist entry on the SDDM github site, which seems to request just what I need. There it is suggested to use pam_mount and systemd (auto)mount units in a user-session, but I'm not sure if that would help in my problem?
Currently I'm calling a script "guest-account" (see below) in /usr/share/config/kdm/Xsetup. Xsetup is looks like:
#! /bin/sh
# Xsetup - run as root before the login dialog appears
/root/scripts/guest-account add
And /usr/share/config/kdm/Xreset looks like:
#! /bin/sh
# Xreset - run as root after session exits
if [ $USER = 'guest' ];
then
/root/scripts/guest-account remove guest
/root/scripts/guest-account add
fi
The script guest-account (found it here) looks like:
#!/bin/sh -e
# (C) 2008 Canonical Ltd.
# Author: Martin Pitt <[email protected]>
# License: GPL v2 or later
# modified by David D Lowe and Thomas Detoux
# Setup user and temporary home directory for guest session.
# If this succeeds, this script needs to print the username as the last line to
# stdout.
add_account ()
mkdir /tmp/guest
HOME="/tmp/guest"
USER=`echo $HOME | sed 's/$.*$guest/guest/'`
# if $USER already exists, it must be a locked system account with no existing
# home directory
if PWSTAT=`passwd -S "$USER"` 2>/dev/null; then
if [ "`echo \"$PWSTAT\" | cut -f2 -d\ `" != "L" ]; then
echo "User account $USER already exists and is not locked"
exit 1
fi
PWENT=`getent passwd "$USER"` || {
echo "getent passwd $USER failed"
exit 1
GUEST_UID=`echo "$PWENT" | cut -f3 -d:`
if [ "$GUEST_UID" -ge 500 ]; then
echo "Account $USER is not a system user"
exit 1
fi
HOME=`echo "$PWENT" | cut -f6 -d:`
if [ "$HOME" != / ] && [ "${HOME#/tmp}" = "$HOME" ] && [ -d "$HOME" ]; then
echo "Home directory of $USER already exists"
exit 1
fi
else
# does not exist, so create it
# Arch Linux modification: Ubuntu/Debian uses their own adduser package,
# which works differently from the own provided by the shadow package.
# Instead, use useradd, which works in any distro.
# Only the syntax is changed
# adduser -> useradd
# --system -> --system
# --no-create-home -> --no-create-home
# --home -> --home-dir
# --gecos -> --comment
# --group -> --user-group
# --shell -> --shell
#adduser --system --no-create-home --home / --gecos "Guest" --group --shell /bin/bash $USER || {
useradd --system --no-create-home --home-dir / --comment "Guest" --user-group --shell /bin/bash $USER || {
umount "$HOME"
rm -rf "$HOME"
exit 1
echo "guest:guest"|chpasswd
fi
# create temporary home directory
mount -t tmpfs -o mode=700 none "$HOME" || { rm -rf "$HOME"; exit 1; }
chown $USER:$USER "$HOME"
gs_skel=/etc/guest-session/skel/
if [ -d "$gs_skel" ] && [ -n "`find $gs_skel -type f`" ]; then
cp -rT $gs_skel "$HOME"
else
cp -rT /etc/skel/ "$HOME"
fi
chown -R $USER:$USER "$HOME"
usermod -d "$HOME" "$USER"
# Load restricted session
#dmrc='[Desktop]\nSession=guest-restricted'
#/bin/echo -e "$dmrc" > "$HOME"/.dmrc
chown -R $USER:$USER "$HOME"
echo $USER
remove_account ()
USER=$1
PWENT=`getent passwd "$USER"` || {
echo "Error: invalid user $USER"
exit 1
USERUID=`echo "$PWENT" | cut -f3 -d:`
HOME=`echo "$PWENT" | cut -f6 -d:`
# deluser is provided by the adduser package on Debian/Ubuntu. useradd
# doesn't have a '--system' parameter, which causes deluser to only delete
# system users, so this will be handled using this script.
SYS_UID_MIN="$(cat /etc/login.defs | grep SYS_UID_MIN | awk '{print $2}')"
SYS_UID_MAX="$(cat /etc/login.defs | grep SYS_UID_MAX | awk '{print $2}')"
if [ "$USERUID" -lt "$SYS_UID_MIN" ] || [ "$USERUID" -gt "$SYS_UID_MAX" ]; then
echo "Error: user $USER is not a system user."
exit 1
fi
if [ "${HOME}" = "${HOME#/tmp/}" ]; then
echo "Error: home directory $HOME is not in /tmp/."
exit 1
fi
# kill all remaining processes
while ps h -u "$USER" >/dev/null; do
killall -9 -u "$USER" || true
sleep 0.2;
done
umount "$HOME" || umount -l "$HOME" || true
rm -rf "$HOME"
# remove leftovers in /tmp
find /tmp -mindepth 1 -maxdepth 1 -uid "$USERUID" -print0 | xargs -0 rm -rf || true
#deluser --system "$USER"
userdel "$USER"
case "$1" in
add)
add_account
remove)
if [ -z $2 ] ; then
echo "Usage: $0 remove [account]"
exit 1
fi
remove_account $2
echo "Usage: $0 add|remove"
exit 1
esac
Last edited by stri (2015-01-29 04:00:19)

Release 12 enforces multi-org. We have the profile options 'MO: Operating Unit' and 'MO: Default Operating Unit' set to our one and only org_id. Is there also a default responsibility that needs to be set to allow GUEST access to an OAF page in R12?
Thanks,
Elaine

ERROR: NO_GUEST: Guest login not allowed from client startup

we are getting the following error with express 6.3.4 when connectting to the express server from Objects using a connection editor.
The error message is
Error #12150 in XPCUBE: Non-fatal (0300): Data Manager is unable to generate transmission.
Error #10300 in XDMRESP: Non-fatal (0300): ERROR: NO_GUEST: Guest login not allowed from client startup
Encountered similar error while calling from OLAP web application.
In stored procedure XWD_RAMSTARTUP: The following Express
Server error occurred: NO_GUEST: Guest login not allowed from
client startup
Which I believe is the same reason.
Can you pls suggest what could be the problem and how can we over come this.

In the Connection Editor, under "Relational Data-> Settings" did you check the "Personal Configuration" box?
If you did, you should ensure the Authentication type is not set to "None".

Dock is drastically different and no guest login option after power loss

Folks, forgive if this is addressed elsewhere. I am fairly new here.
I am running a MacBook with 10.5.8. I have been having some battery/power issues lately which I thought was resolved with a new battery. Today, my machine shut down while plugged in and a purported "79% battery" left. It has done this perhaps 2 other times in the last year or so.
When I got the machine to completely boot, there was no longer a "guest login" option which I remember setting months ago. Also, my dock had large icons, many icons for programs I run everyday were missing. All of my applications, files, etc. seem to be intact. It is as though the machine has re-set to default settings. Why did this happen? Can I go back to my old settings somehow?
Thank you!
Dani

There is no prevention or network proceedure that would prevent that matter. The correct way to fix that problem after a storm will be to disconnect everything, power units down for 15 to 20sec.(router & modem), power units back up, once units come back up to normal fuction connect the modem back to router, then connect pc to router and reboot. That should establish your connection back after power outage.

File data source not found with guest login???

Hello everybody,
i'm working with BIP 10.1.3.2.1 on Win2003/Tomcat.
Everytime if i call a report with a file data source directly via url or in the gui via guest login i get the following error message: "File data source not found: <file data source name>".
If i use a login in the gui which have the explizit permision to use this data source then there is no problem. Well at this point u might say then use this account, but - if i call a similar report with a database data source directly via url or guest login in the gui everything works fine. So, where is the point? Any ideas?
Best regards
Ralf Kanis

Hi guys,
I'm running into exactly the same issue. The problem seems to occur only when the report being accessed by guest is a file data source. The only other option I could think of is setting up SSO for BIP and the application issuing the URL to the report.
Could'nt find anything else in the documentation or known issues list that might fix this without having to setup Single Sign On. Any further luck with your investigation? I'd appreciate any feedback.
Thanks
Jonathan Cruz

Yahoo login problem was Verizon DSL now Verizon cellphone

I'm not even sure where to start. About February 2009 I started experiencing login issues with my Verizon Browser. For the Login the options were the Verizon.net account, my regular Yahoo account and Guest. For years I have always logged in to my regular Yahoo email. Then the problems started earlier this year where I repeated would get 'wrong password' when attempting to log in my regular Yahoo so I started to have to log in the Verizon.net account and then click over to the regular Yahoo email account (no password required and when security timed out had no issue accepting my password). Then at the end of April 2009 my hard drive crashed. I threw my hands up and decided to handle the computer problem when I returned from vacation May 17th.
We returned from Europe and I replaced my hard drive, reinstalled my computer programs, but NOT the Verizon Browser. Haven't a clue if it's a contributing factor to the next problem. Without the Login box I was no longer forced to log into Verizon.net to get to my regular Yahoo account and I no longer experienced an issue logging into my regular Yahoo email. However, then I started experiencing login issues on my cellphone. I have an LG with 'broadband' service and have accessed by Yahoo email account via my cell phone for years. It also seems that long since I've ever had to enter my username and password, however, suddenly it's required probably 8 out of 10 accesses. And it doesn't recognize my login many of those times which pretty much renders the cellphone useless since I don't make many calls. It repeatedly will give me error messages saying my username and/or password are incorrectly (AND THEY ARE NOT!). Unlike the computer, I cannot login to the Verizon.net email account as it says it has determined I have a Yahoo account and need to log in that way (it also means I can never check my Verizon.net email account via my cellphone). Often the login problem clears once I access my email via my desktop, but this is not an option when I'm traveling.
I am totally loss as to where the problem lies. Don't know if it's an extention of the same type of problem, but on my cell phone about February 2009 I started to have to ALWAYS respond to the security question when accessing my bank via the cellphone. I always check the box that I use this device to access my accounts and the only time I don't have to respond to one of the questions is if I log back into the bank site within minutes of the original login.

Please check the following page on Verizon's site:
Discontinu ed Portal Partnershi p with Verizon in Some Areas
More info on discontinued portal partnerships can be found on the Email board.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

How do I transfer an iphoto library from a guest login to either another login or a thumb drive?

I am letting a friend use my computer as a surrogate for the time being to backup her phone and photos. I had never used the guest login before and didn't realize that all the files would be lost at logout. I haven't logged out yet but I need help trying to get the iphoto library onto a thumb drive. If at all possible I would like to get the backup from itunes as well.
I have already copied all of the photos out of iphoto but that doesn't save the time, date and location of them. I cannot access the folder to move the iphoto library because of it being in the guest login. I have already deleted the photos off of the phone so that is a no go.
I've been trying to search for an answer but haven't had any luck yet. Any help would be greatly appreciated.

have already copied all of the photos out of iphoto but that doesn't save the time, date and location of them.
Export them
File -> Export
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Guest Login feature in SRM 7.0

Hi,
How do we use Guest Login feature in SRM 7.0? Requirements are given below.
1. Purchaser publishes Public RFx.
2. In Conpany's web portal, link is given as "Open Tender-Click here" to enable one time bidder to participate in the Open tender.
3. A new bidder who is not registered as bidder in the organisation would like to participate in the Bidding. He clicks on the above link in the organisation's web portal which will login as "Guest" and direct him to the SRM portal where the Bidder can see public tender Bids.
4. He opens the Bid and analyse the details. Then he can decide to participate.
5. Then either ROS can be used or conventionally he can send mail to the organisation requesting to be a Bidder.
I heard some custom developments are done in few projects with custom screens. But can we achieve the same in a standard way. If developments are required, then complexities involved or process involved in the developments.
Regards,
Prasanna

Hi Vineela,
According to my information this BADI still exists.
There was a note that entered this BADI into SRM 6.0
1158310 SOCO: Missing BADI in search (first screen)
In SRM 7 this code is here, you could have a look and set BP in /SAPSRM/IF_CLL_DOM_SOCO_GAF1~SEARCH
to check what is happening, it may be something small.
There is nothing on our database about other customers with similar complaints.
The method you would need for sourcing is
IF_EX_BBP_WF_LIST~BBP_WF_LIST_SOCO
Hope this helps,
Kind Regards,
Matthew

Oracle 10g express edition browser login problem

Hi
I installed oracle 10g express edition and after installing successfully logged in browser , unlocked hr login and also created one form then I shutdown the database and rebooted my pc and since then when I try to login to "go to Database Home page" after starting database , I get a cookie 127.0.0.1 with username and password, First of all I am not sure what username/password it is expecting, I believe it requires my Windows XP username and password , I tried to enter couple of times my pc login username which has administrator privileges, I also checked it has ora_dba group but after entering pc username , password browser opens saying "unauthorized". I created another os user and tried with that still same. I tried entering oracle password "SYSTEM" and password for it but still could not login, I tried HR username password still nothing.
I tried disabling firewall but still same issue. I tried to re-install two time but still same .
Start database dos prompt does show all the process are started successfully .
I also did ping for 127.0.0.1 and it does ping.
I tried everything what I knew.
Can anyone please help me ..to resolve this issue .

Hi
This is how I resolved the browser login problem .
I checked the listener log
C:\OracleXE\app\oracle\product\10.2.0\server\NETWORK\log
And found the error
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
I have another version for oracle installed on my pc .
I ended both the oracle process (Oracle.exe) through the Task Manager
Then manually started OracleServiceXe service through Component Services
Control Panel Performance & Maintenance Administrative Component Services
Then did following
Programs Oracle Database10g ExpressEdition Start Database
Programs Oracle Databse10g ExpressEdition Go to Database Homepage
Enter username SYSTEM
Enter password xxxxxx whatever given at the time of installing.
And I did successfully login to the browser .
Hope this will help to those of you who have run into similar problem which I faced
Good Luck .
A. Patil

Web Center app with ADF Security - login problem

I have a custome Oracle Web Center app.
I have a page.html with an embedded login form posting to j_security_check. I've configured the ADF security policies to redirect to a JSPX on successful login.
When I try the correct username/password, I get redirected not to the page I defined in ADF, but to the root page http://127.0.0.1:7101/MyApp-ViewController-context-root/
and i get
Error 403--Forbidden
I've checked the weblogic.xml as per http://andrejusb.blogspot.com/2009/12/solving-error-403-forbidden-in-adf.html, all the required entries are there.
This works fine if i use a Login link with
destination="#{'/adfAuthentication?login=true&end_url=/faces/postLogin.jspx'} "
which redirects to the default login.html and then to the right page. I've copied the form from the default login.html into my master HTML page.
Hope my question is clear. Any suggestions why it is going to the wrong URL after login.
Is there anything specific I should see in the jazn-data.xml or web.xml regarding the post-login URL since i cant see that in either.
P.S. Have been advised to try here when I originally asked this in the WebCenter forum. Web Center app ADF Security - login problem
Edited by: new_to_webcenter on 18-Jan-2011 05:25

Thanks for your response Frank.
The web.xml has
<security-constraint>
<web-resource-collection>
<web-resource-name>adfAuthentication</web-resource-name>
<url-pattern>/adfAuthentication</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>valid-users</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>/login.html</form-login-page>
<form-error-page>/error.html</form-error-page>
</form-login-config>
</login-config>
When configuring ADF Security via JDev , I chose "Redirect upon successful authentication" to the Welcome Page
"/faces/postLogin.jspx"
this then adds into web.xml
<servlet>
<servlet-name>adfAuthentication</servlet-name>
<servlet-class>oracle.adf.share.security.authentication.AuthenticationServlet</servlet-class>
<init-param>
<param-name>success_url</param-name>
<param-value>/faces/postLogin.jspx</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
So the sequence which works is:
Login via the '/adfAuthentication?login=true&end_url=/faces/postLogin.jspx' and this redirects to login.html (OOTB form which posts to j_security_check) and then to the postLogin.jspx
I'm trying to do away with a Login link, and trying the simple login form embedded in my page alongwith other content.
So should the form be posting to j_security_check directly or to the adfAuthentication ?

IMac login problems on any 10.6 update

I have a 24" iMac that is 2 years old. After using snow leopard on my husband's new macbook I decided to get it for my imac. The base install of 10.6 works fine but of course it immediately wants to be updated to a new release. If I update it past the base install from the CD I get login problems.
What happens is that the desktop appears and the finder menu is at the top but the date and network status etc - everything from the top right of the menu bar is missing. The computer will not move forward. No amount of waiting or button pushing will improve the situation.
Sometimes I could log in to another account but then it would start happening on that acocunt too. I made myself a new account and it started happening on that too. Every time if I did a re-install of the base 10.6 from the CD it went back to working fine. I would have to say no to every update of 10.6 on software update. This has been going on for 6 months. I thought maybe with 10.6.4 they fixed it but it did it again.
yesterday I did a fresh install. Thinking it was caused by my old quicken 2007 or parallels (though its v 5) or something else that has some bit that starts at login I formatted the HD , installed 10.6 fresh and installed nothing but ilife 9. I downloaded the 10.6.4 update and it still happens. I logged off my account and logged back in to test and it froze again. I am at my wits end. The only thing I saved from my old profile was my mail folder. I can find nothing else to fix. Any ideas?

SamNS wrote:
the desktop appears and the finder menu is at the top but the date and network status etc - everything from the top right of the menu bar is missing.
Do things behave better if you boot into "safe mode" by holding down a shift key while your Mac is booting?
http://support.apple.com/kb/HT1455

How to disable the guest login in OBIEE 11g?

Hi,
Whenever i click on analytics link, Guest automatically logs in , then i have to logout in order for the user to log in.
How do we disable this Guest login?
Thanks
Ashish

Hi,
Whenever i click on analytics link, Guest automatically logs in , then i have to logout in order for the user to log in.
How do we disable this Guest login?
Thanks
Ashish

Simultaneous login problem

Hi
I am having simultaneous login problems. In the past I have been able to sign into my skype account on both my Mac Book Pro and my Windows 7 desktop PC. However since I had to change my password I can only login into one machine at a time now. Also when I change my password on the desktop PC I can only sign into that skype / computer. Whenever I type the same account name and same exact password on my Mac Book Pro, it says it doesn't recognize my sign-in details but I am 100% sure that I typed it in exactly the same way as I did on my desktop. Another is that when I reset my password on my Mac Book those details won't work on the Desktop PC and vice-versa.
I would like to know what is the problem in this situation, I am not sure if this is an application error or a networking error where the account details are not signing in from a different IP or MAC address.
Please and thank you!

"The load balancing was already functional:"
Do you have a description how to do that?
I Would like to know how.
"so ALL traffic, not going to the LAN network and so over this interface, went out on the DMZ interface, with source IP from LAN."
If you put the VPN servers behind 1-1 NAT instead they will use the firewall as GW and the VPN clients will get at your remote sites/LAN IF you add routing definitions in VPN config what networks are reachable through VPN.
Or you keep servers as they are but also add add more routing definitions in VPN AND static routes to each server with the firewall as gw to those remote networks. Default gw will still be through the DMZ IPs though.
The problem with more than one VPN client from behind same IP address is, with your current server settings, most likely because of the client side NAT router isn't coping with the task. Your public IP VPN server(s) should mean NAT VPN problem is at the other end (customer/client network router/firewall).
If two VPN clients behind same NAT router connected to different servers at your end, "12.34.56.80" and "12.34.56.81" (both are public IPs?) respectively I believe at least two should be able to connect.
3G/4G modems isn't an option?
Maybe try bringing your own tested working portable router (ethernet/wifi maybe includes a VPN client that connect to your servers) to the customer and put it temporarily on their LAN? There are these small new 3G/WiFi routers too. Depends on wether you need to be connected to customer LAN or not.
Try other VPN solution, SSL or OpenVPN?
Use both PPTP and L2TP simultaneously (PPTP could be troubelsome if GRE/TCP 1723 passthrough is disabled)?

Guest login problem

Similar Messages

Maybe you are looking for