Guest options all greyed out...apart from delete

Just started a new role where virtualisation is Hyper V managed with SCVMM console. I am completely new to SCVMM and mostly new to Hyper V so could do with a some help with, what might be one issue or could be two separate issues
I've trawled the net but cannot find anything helpful so hopefully someone will have similar experience and can shed some light
ISSUE !:  Two servers, a MS Failover Cluster hosting 2 instances of SQL, are reporting an 'Unsupported Cluster Configuration'.  The error info is error(13921) suggesting an issue with NICs.  I have checked all elements both back end and front
end and all checks out OK.  Virtual switches on the HYPERV cluster are fine.  Just to make things more interesting, although one of the nodes is hosting both SQL instances, it hasn't been installed on the other node but I don't want to remediate
this until I am comfortable with the next part of the problem (see ISSUE 2)
ISSUE 2:  On the same two servers mentioned above, all options are greyed out, including Connect via RDP & Console, (although I can RDP to them both using MSTSC) and all power options,  except delete.  (if this were ESX based
I'd say that the VM Tools weren't running)
Could all this stem from the incomplete SQL instance installation? Is SCVMM smart enough to recognise that there is an issue with the failover cluster config (I don't think so personally) and report it as an 'Unsupported Cluster Configuration' AND could
this be causing the loss of controls. 

Hi Sir,
Could you please tell us the VMM and the hyper-v version ?
Can the cluster work without SCVMM ?
For cluster issue , cluster validation report should be a good place to start cluster troubleshooting :
http://blogs.msdn.com/b/clustering/archive/2012/05/07/10301709.aspx
As for  ISSUE 2 , my suggestion is remove the cluster from VMM then check if the VMM agent and related stuff were really removed , after that please solve cluster configuration problems if it exists in cluster validation report then add cluster
again into SCVMM.
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

  • SQL Server 2012 Management Studio - Stop, Start, Restart options all Greyed Out

    I am a sa and local admin on various SQL Servers. I can see the stop/start/restart etc. options when using lower version tools and also when directly logged onto the servers. However with SQL2012 SP2 MS remotely these options are all greyed out for
    all servers. I can confirm that I have effective 'view server state' perms, and also that domain admins can see the options. Why can't I see these options through SQL2012 SP2 MS? Any help appreciated.

    I am a sa and local admin on various SQL Servers. I can see the stop/start/restart etc. options when using lower version tools and also when directly logged onto the servers. However with SQL2012 SP2 MS remotely these options are all greyed out for
    all servers. I can confirm that I have effective 'view server state' perms, and also that domain admins can see the options. Why can't I see these options through SQL2012 SP2 MS? Any help appreciated.
    What rights do you have on windows machine where SQL server 2012 resides, the one who you want to start stop remotely. Are you connecting SQL server 2012 with SSMS 2012 or some lower version SSMS ?
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • Unable to share slideshows in iPhoto, share option all greyed out except for email and iCloud

    iPhoto version 9.6
    OS X Yosemite 10.10.1
    Completed a slideshow share 11/28 via iPhoto to Facebook
    Created a new slideshow to upload to fb msg users however all fields in Share were greyed out except for email.
    While working with Apple support and waiting on them I went into iCloud preferences and unchecked a share with selected users and found then that under share iCloud now appears along with email however all other options for sharing are still greyed out.
    Please help as support is saying that is the way iPhoto now works
    Thank You, Theresa

    Export the slideshow and that makes a movie of it.
    Upload that to Facebook.

  • ICloud Options All Greyed Out.

    Hi Fellas,
    Ever since i upgraded to Yosemite my iCloud has been messing up. It shows i’m signed in but won’t display further details like used & unused space in my quota. It also doesn’t let me set up family neither does it let me check or uncheck options. Everything is just greyed out even when i enter my iCloud password it stays the same; Nothing happens. Tried over and over for weeks now; No success.
    It won't sign out also. I think there's something wrong somewhere.
    I have Reset my Keychain so many times to no success.
    Can anyone help?
    Thank you.

  • Essbase install option is greyed out on solaris

    Hi,
    I'm installing 64 bit EPM 11.1.2.2 on solaris 10 Update 10 sparc 64 bit server.
    I 've downloaded required files from edelivery and upzipped all files on solaris machine. But somehow the Essbase option in the EPM installer is greyed out. Infact all options are greyed out apart from couple of options under foundation. All preinstall checks done by installer wer ok.
    Any pointers will be appreciated.
    Thanks in Advance!!

    Hi
    Thanks for the replies.
    I'm doing a a new install on a new solaris machine. Only oracle client was installed earlier on this machine with the same user (say userA). I'm using the same userA to install Essbase.
    John- I've tried clicking on the installer window/ checking/unchecking all products, but nothing happens. I do not see any missing unix packages. Is there a list of required unix packages mentioned in the install n config guide ? what do i need to look for?
    Vasavya - where does this oracle.instance file resides? In my case UserA installed the oracle client and the same user is trying to install Essbase for the first time.
    However during oracle client installation - the installer prompted me to run a script using root user specifically.
    Could this be related to the fact that my oracle client is installed under /m01/app/products/11.2.0/client_1 and I'm trying to install EPM under /m01/app/products/oracle/Middleware ?
    Could this be the reason ?
    Also, I'm downloading/ unzipping all files again just to be sure that nothing is corrupted.
    Any pointers will be helpful
    Thanks again

  • HT201274 iPhone 4s, but wifi option is greyed out. I want to erase all content and setting from my old 4s and it will not connect to the internet, because the cellular data is no longer connected, bought a iPhone 5c. how do I erase all on my 4s with no in

    I have an iPhone 4s, but wifi the option is greyed out. The wifi stopped working on it months ago. Now I wanted to erase all content and setting from my old 4s and it will not connect to the internet, because the cellular data is no longer connected, since I bought a new iPhone 5c. I can't erase my phone by pluggin it into my Macbook Pro, since I can't disable the "Find my iPhone" App without internet. How do I erase all the data and setting on my 4s without connecting to the internet? It is running ios 7

    See this https://answers.yahoo.com/question/index?qid=20131119125513AAtRloc
    I just did it. To enter DFU mode, I had to use "method 3" on this post
    http://thebigboss.org/guides-iphone-ipod-ipad/dfu-mode
    Too bad my 4S is 2 years old. Wifi is dead. I had to upgrade to 5S, but 5S is soooooo much faster than 4S so it's kind of good outcome. Without the 4S breaking down, a stingy person like me would have never upgraded the phone.

  • I am trying to delete a page from a pdf using Acrobat X Pro but the delete option is greyed out. Why

    I am trying to delete a page from a pdf using Acrobat X Pro but the delete option is greyed out.  Does anyone know why?

    Post your question in the forum for Adobe Acrobat.

  • When i try to sync photos from iPhoto to my iPad using iTunes,  the "Selected Folders" option is greyed out with only the "All Folders" option available, how do i change this?

    When i try to sync photos from iPhoto to my iPad using iTunes,  the "Selected Folders" option is greyed out with only the "All Folders" option available, how do i change this?

    I add the keyword 'sync' to any photos I want added to the iPhone/iPad.
    Then, during the regular process of syncing the iPhone/iPad with my computer (mac), the photos with that keyword would be copied onto the iPhone, iPad.
    I've been doing it this way ever since I was shown how to; ie after I got my iPhone 2 years ago. And every time the process worked - until the last few weeks. Suddenly it doesn't do it any more.
    I believe I have upgraded software (either iTunes or iPhoto or both) during this period. I try to keep my software updated but have noticed previously that the new version often is disappointing.
    I've not tended to use Smart albums much.
    MM

  • All iWeb options are greyed-out, and can't make a new sites or pages.

    Hello,
    I am having a very annoying problem with iWeb. Every option is greyed-out! I can't make a new page or site, and it quits as soon as I close the iWeb window. It is version 1.1.2 I have tried installing useless updates for iWeb that did nothing, and I've tried to open iWeb from iPhoto by clicking the iWeb button, which also did nothing. I'm just about to give up on it.
    Can anybody please point me in the right direction or have a fix for this? All help will be appreciated!

    Hi ineedagoodalias,
    The answer to your problem isn't necessarily the simplest, but I'm 99% sure that it will work for you.
    You need to delete and reinstall iWeb. Not hard to do; you just need your installation DVD's that came with your machine.
    Drag the iWeb.app from your Applications folder to the trash. Spotlight for other elements of iWeb, and trash those as well. Empty the trash and restart your machine.
    On your recovery disks, as you move through the prompts, look for "Install bundled software". Customize the install to include only iWeb. After reinstalling iWeb you will be back to 1.0.1.
    Update the app to 1.1.1 directly from this link:
    http://www.apple.com/support/downloads/iweb111.html
    This will get you going, and you can update to 1.1.2 when you are sure everything is working properly. For other FAQ on iWeb, please see this link:
    http://web.mac.com/varkgirl/iWeb/iWebFAQ
    Be sure to let us know how it goes.
    Mark

  • All "timeline" menu options are greyed out in my copy of

    All "timeline" menu options appear greyed out in my version of Dreamweaver 8. I've tried deleting the cache file and the configuration folder, but without success. There was originaslly some reference to a Javascript error message reference timeline(), since when I've ensured my Java was updated. Any ideas please?

    For some reason, the Link > Framemaker document option was also greyed out when I created the project.  I had been having trouble with the .xpj file not being created by RH11 and reinstalled TCS5/RH11.  Then I created the project and was able to find and open the .xpj file.  Like I said, I found then that the  Link > Framemaker document option was greyed out and could only import the FM book.
    I recreated another project and see that the Link >   Framemaker document option is greyed out.  I can only use Link > Word document, which is of no use to me.  Any suggestions would be welcome!

  • All options are greyed out after i Click on Apply Maitenance

    Hi All,
    I am upgrading our EPM system from 11.1.2.1 to 11.1.2.2. I have downloaded all the required files from e-delivery.oracle .com and unzipped them. I selected Apply Maintenance and when i clicked next all the options are greyed out. I am not sure what i have done wrong. I am using the same user ID which was used for installation of hyperion 11.1.2.1.
    Kindly help me out.
    Find the screenshots at my blog.
    http://hyperion-consulting.blogspot.in/2013/01/all-options-are-greyed-out-after-i.html
    Regards,
    AS

    From your screenshot it says that 11.1.2.2 Foundation has been installed when it should say 11.1.2.1 like this - http://2.bp.blogspot.com/-J_9A8U41JS0/T5WXO3JQtxI/AAAAAAAAEj8/0nqcNdo1bFQ/s1600/image022.png
    Also you should only have the option to "Apply maintenance release" like this - http://1.bp.blogspot.com/-1zQHVCODSr0/T5WXNLQN4YI/AAAAAAAAEj4/vNQ_vOT03_8/s1600/image021.png in your screenshot you also have the option to Re-install the release.
    Are you definitely sure the environment has had nothing applied to it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • CS6 Encore launches but all options are greyed out

    The headline says it all. I'm using CS6 on a MacBook Pro, OS 10.7. Previously Encore has worked well. After the most recent update, Encore will launch but all of the options are greyed out. I can't start a new project, etc. When I try to open a previous Encore project, I receive an error message that some needed software is missing. Any ideas to help me solve the problem? With many thanks.
    Christopher B

    I suspect that same sort of issues that one gets when the activation is messed up. I think the resolution is deactivate and reactivate.
    Are you missing any presets in Premiere? I would look at some of the issues in the Premiere forum to further diagnose the problem and look for the recommended fix.

  • Nearly all Disk Utility options are greyed out. I just want to wipe dvd-RWs.

    I have been searching for a few months for a solution, I finally decided to post my problem.
    I have many rewritable disks that I would like to reuse. However, my disk utility is utterly worthless as nearly every option is greyed out. Only the "verify disk" option is available on any of the disks on the left column. All I want is to be able to erase my disks (or not even erase, just burn over them!), yet my disk utility does next to nothing.
    I currently run 10.8.3 Mountain Lion, yet I had this problem at least since lion, and possibly snow leopard.
    Thanks all,
    Hazzard V

    Can you post a screen shot of what you're seeing in Disk Utility?
    I just tried it with a DVD-RW which shows no files, except that I know there are some on it.

  • All Update options are greyed out in RH11

    Hi.  I just reinstalled TCS5/RH11 to get rid of a missing .xpj file issue.  Then I imported an FM book and created a glossary in RH11.  I then edited my FM book and came back to my RH11 and tried to update the project with the changes in my FM book.  All options of Update are greyed out so basically, I cannot update my RH11 project.  Can someone hear me wail?

    For some reason, the Link > Framemaker document option was also greyed out when I created the project.  I had been having trouble with the .xpj file not being created by RH11 and reinstalled TCS5/RH11.  Then I created the project and was able to find and open the .xpj file.  Like I said, I found then that the  Link > Framemaker document option was greyed out and could only import the FM book.
    I recreated another project and see that the Link >   Framemaker document option is greyed out.  I can only use Link > Word document, which is of no use to me.  Any suggestions would be welcome!

  • When I try and print a web page in the print screen ALL the Print Frame options are greyed out. It won't let me print a page as I see it. I need to pring a page as is. How do I do it in the new 8.0??

    I go to print and try to select the radio button to print all frames, but It's not working

    The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
    Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
    As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page.

Maybe you are looking for