Guest password

I need a guest password for my Nook Tablet....Please Help

Please follow the link below.
Checking the password for the guest access network

Similar Messages

XP pro file sharing and guest password - how to enable guest password?

Hi,
I want to share files between two Windows XP pro computers. I would also like that these shares can only be accessed with a password.
Here's a description of my setup:
I have two laptops: over 1 yo Fujitsu-Siemens (FS) running on Windows XP pro (finnish) and a brand new Thinkpad T61 (TP) running on Windows XP pro (english). Both of theses computers have guest account enabled and these accounts have also been password protected. FS's guest account is called "vieras" because of the language settings and TP's guest account is of course just "guest". Guest account passwords have been enabled using "net user <user name> *".
I've disabled simple file sharing on both computers, set shared folder permission to only contain these users: TP - "Guest (TP\Guest)" and FS - "Vieras (FS\Vieras)". Both computers have F-secure on them so I've made firewall rules which enable following services both ways to a specific IP: Ping / ICMP echo request and reply ; Windows file sharing and network printers ; Windows network browsing ; ICMP / Internet Control Message Protocol. I've also enabled these services on Windows firewall.
These computers can connect to each other either via Wi-Fi access point (b-mode) or directly using an ad-hoc Wi-Fi configuration (g-mode). Obviously the latter is used for more bandwidth hungry file transfers. Also, sometimes a cross-over Ethernet cable is used as well for even faster file transfers.
Everything on my setup works just fine except just one thing. I connect to a shared resource by running the computer's IP address. When I connect from TP to FS it prompts for username and password. FS accepts both english and finnish names for the guest account provided that the password is correct. But here's the problem... When connecting from FS to TP _no password or username prompt appears_. If I browse TP's shared folder sessions (under My Computer -> manage) I can see that FS is logged on as "vieras" i.e. FS's guest account.
Since I enabled FS's network shares over a year a go I can't remember everything I did to make it work. Every relevant configuration on TP and FS seem to be identical (e.g. "Security settings -> local policies -> security options -> Accounts: limit local account use of blank passwords to console logon only -> enabled") but still TP accepts connections without password prompt.
I've tried to get TP's password prompts enabled for a while now without any success. I did a lot of searching on the subject but I could only find instructions on how to disable guest account password prompts for network shares.
Has anyone had similar experiences or does anyone know what I should try out next? Thanks...
Solved!
Go to Solution.

Success!
I solved my problem by changing guest account passwords. I tried to keep things simple by using the same guest password on both computers. This however allowed FS to log on to TP without guest password for some unknown reason. My logic would tell me that having the same guest password would allow both computers to log in without password but this wasn't obviously the case. I guess Windows has its own logic that I can't figure out or this issue had something to do with different language setups. Anyhow my shares work now like I want them to work.

How do I set a guest password on my media hub?

Page 43 of the NMH405 media hub manual indicates that you can set a guest password on users. It is supposed to be under settings\system and although I see all the other settings under system, that one isn’t there. Maybe they cut the feature at the last minute. I'm running 3.18.15 of the firmware.
My ultimate goal is to have one account that I can use to write new content to the server and one that is read only for my family. I'm worried right now that they will delete the content (which they have done).
Any advice or workarounds to achieve this would be appreciated.
Thanks,
Peter
Th

Guest access can only be used if you'll be accessing the media hub remotely. Network Media Hub also lacks multiple user access.
You may refer to these articles about your Network Media Hub:
- Article ID: 19717: Accessing the Media Hub Remotely as a Guest
- Article ID: 19714: Creating a Guest Password for Remote Access to the Media Hub
- Article ID: 17571: Media Hub Lacks Multiple Users
If everyone needs to believe in something, I believe I'll have another beer..

My mac went black and now its asking for a guest password?

hello, I was trying to save all my information in my mac laptop and asked for a password I did type my admin password then laptop froze and went black! now its asking me for a guest password, I dont remember to have one! I tried all the passwords that I have/had and I doesnt take them! I cant pass from the start screen
If someone can help me!
thank you

That's not a password, it's your Apple ID. The same one you use to log onto this site or the App Store.

How to set up guest password?

I still cannot figure out how to set up a guest password on my wireless network. I'm trying to use 192.168.1.1 but dont see an obvious place to set the information. And do I have to connect to router to the laptop before making the changes?

Well what model number router do you have? If it is a E series you must load and run the Cisco Connect software to configure the Guest Network.

Need a guest password

need a guest password to connect my tab to the cisco router E900.

Hi,
Please refer to this link for the steps on how to retrieve it.

E1000 Guest password setup not working - security is not activated

I used Cisco connect to set up guest access with a secure password. Cisco Connect now indicates guess access is allowed and shows the password. However, when I actually try to connect to the guest network, it shows no security at all, and I can join the network without a password. What could be wrong?

In this case, Guest network gets connect to the network without asking the password. But any one try to access the internet then at that point of time it will ask for the guest password..

Reset guest Password in ISE

The title says it all really,
Is it possible to reset a guest password or create your own guest password in ISE for guest users?

Just like Peter said, reseting the guest account password is not supported with ISE.
from the link Peter provided:
'''snip'''
If a guest user forgets their customized password, you must create a new guest account for that user. Currently, resetting a customized password is not supported.
'''snip'''
HTH
Amjad
p.s: +5 Peter.

Guest password request for purplecat website in oakland california 192.168.33.112

guest password request for purplecat website in oakland california 192.168.33.112

I have the same errors occurring at an alarming rate. I did isolate it to the App Store. Specifically when checking for an update. I was hoping that you could test this out for me. Go to your console log and select all messages and then check kernel in the sender box (bottom left). I found that now is a good time to insert a marker. Now launch the app store then got to the update section. Select check for update.
Does this generate a series of the errors? I can reproduce the errors every time I "check for updates". The error would not show up when checking for updates in iTunes.
I did notice errors in both extending from CFNetwork
App store:
2015-01-15 8:40:38.047 AM storeassetd[356]: CFNetwork SSLHandshake failed (-9802)
iTunes
2015-01-15 8:53:53.986 AM iTunes[2200]: CFNetwork SSLHandshake failed (-9806)
Please compare and see if you get the same results.

HT1998 My iPAD can use the internet through my airport extreme, but the airport utility does not see it so I can't create a guest password. What am I doing wrong?

My iPAD can use the internet through my Airport Extreme, but the Airport Utility does not see the device so I can't set a guest password.

If your Mac is using the Lion operating system with recent updates, it will be necessary to download and install AirPort Utility 5.6 for Mac OS X Lion
Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
Select the AirPort Extreme and click Manual Setup
Click the Wireless tab just below the row of icons
Click the Wireless Network Options button
Remove the check mark next to Create a closed network
Click Done, then click Update to save the new settings and allow 25-30 seconds for the AirPort Extreme to restart

Need a guest password help please

need guest password

Hi,
Please proceed to the link below to see the steps on how to retrieve your guest password:
Steps to Retrieve your Guest Password

E2500 with no guest password prompt

Try as I may, I cannot get the guest has no password or other security.
I reset the router to factory defaults.
I made sure it had the latest firmware.
I turned off guest wifi then turned it back on.
Guests CAN get online just fine, but it never prompts for the password that clearly shows on the relevant page.
Can anyone help me get it working with a password?

By default, the guest password when using E2500 is ‘guest’ all in lower case. You can verify it or even change this default password on the router’s setup page, Wireless tab>>>>Guest Access sub tab. The guest network is broadcasting as unsecured but when you connect to it and access a webpage, it is then that you will be asked for the guest password. And there is no need to worry since the guest network is different from the main wireless network. The devices connected to the guest network can’t see the devices connected to the main wireless network or vice versa, this is because they are not on the same IP range. The guest computers will be having an IP of 192.168.33.xx or 192.168.3.xx and the IP from the main wireless network is 192.168.1.xx, if the default IP address of the router was not changed. And please try to make sure that your wireless adapter is not connected to the main wireless network when you connect to the guest network, you might be connect to your main wireless network that is why you were able to go online wirelessly even if you select the guest network, it would be best to delete preferred wireless network if you will try the guest network.

Guest password is turned on Cisco Connect but not asking for password when joining network.

I just set my wireless modem and i had applied a password for the guest wifi signal and turned it on. But when you join the network its not asking for the password. What do i do to fix this?

JBills wrote:
I just set my wireless modem and i had applied a password for the guest wifi signal and turned it on. But when you join the network its not asking for the password. What do i do to fix this?
When you connect to the Guest network, you wouldn’t be asked for a password. The guest password would only be prompted once you open your internet browser.
Guest Network Frequently Asked Questions

I need a guest password please

For my nook color please

Click this link and you'll know the answer:
http://www6.nohold.net/Cisco2/GetArticle.aspx?docid=c3e42afc03994df5bb6bc531b42e9201_21461.xml&pid=8...
NOTE: You have to be the administrator or the owner of the network to know the guest password. Otherwise, you'll have to ask the owner of the network.
"Don't fix it if it ain't broken."

Cisco Connect - Where to find Guest Password

CAn anyone help me please. I just installed by router on my Tower but my husband's laptop keeps asking for a Guest Password. Can anyone tell me where I find this?
Thank you. a Cisco Guest Access window opens and asks for the password. I have the password and type it in on his laptop but it keeps saying it is incorrect and I have changed it on my tower and tried again but still it will not allow him access even though there is a connection.

@ nekaufer
Guest access allows you to limit and provide access to guest users on your wireless network. Its configuration such as the password and the number of guest allowed is available through the Cisco Connect software and on the web interface on selected Linksys models. By the way, what is the model of your router?

Guest password

Similar Messages

Maybe you are looking for