Guest permissions to view profile photos

I created a landing page which points to a forum. I have granted guests the ability to only read the landing page (which shows posts and replys in the forum). The problem I am having is that while the text of posts and replies is visible to a guest, the photo of the poster will not appear. It only shows up if the user is logged in and viewing the landing page. Guest has been granted read access to the user workspace of the posters but still cannot view the photos. Any help would be appreciated..

chipps7,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

    Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I can't seem to open (view) my photos.  I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."

    I can't seem to open (view) my photos.  I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."  I have never had this happen before?  Thanks!

    Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #1, Repair Permissions.
    OT

  • How can I change my Profile photo or edit the thumbnail?

    QuestionHow can I change my Profile photo or edit the thumbnail?
    AnswerThere are a couple of different ways to change your profile photo or thumbnail image on Tagged.
    Here's a quick How-to video that shows you how to change your profile photo
    If you wish to change your profile photo, follow the instructions listed below:
    Hover your mouse over 'More' in the top Nav bar and select Photos.
    To use one of your previously uploaded photos as your profile photo, place the cursor over the photo you wish to use, and click the small green “#1” box when it appears
    If you wish to use a new image as your profile photo, upload the image to your photo gallery, and then click the small green “#1” box on the photo
    If you are viewing one of your photos individually, you can also set it as your profile photo by hovering over it and clicking the same green "#1" button.  You may also edit the caption and comment on your photo in this view
    You can also change your profile photo by doing the following:
    On the Navigation bar click Profile and select the Edit Profile link to the left of your Profile picture.
    To upload a photo locally from your computer, click the “Browse” button, select the image you wish you use, and then click “Upload”.
    To upload a photo using an image URL address, click the “Add from image URL” link, paste the URL address into the field, and click “Add Photo”.
    To use a photo from your gallery, click the “Use one of my photos” link to open a thumbnail gallery of your uploaded images.  Click on a thumbnail to set that image as your profile photo.
    After selecting a photo, you can alter its thumbnail by the marquee box by dragging the “anchor” points of the box.  When you are finished, click "Save Thumbnail"

    HELP! I was fooling around with my profile pic and selected and saved a cropped thumbnail. I hate it, and I haven't been able to figure out how to return my thumbnail to just a mini-version of my full profile pic. I've even re-up-loaded a copy of the original photo, with a different file name, but Tagged automatically crops it to the same thumbnail.  Is there any way to return my thumbnail to just a mini-version of my whole pic?  Thanks for your help :~)  

  • I cant view my photos and videos in my ipod

    hello peps!
    can u pls help me..why can;'t i view my photos and videos in my ipod touch?
    many thanks!
    janna bebe

    If you have a boot SSD, no way.
    If you have a boot hard drive, not Filevaulted, you can STOP using the computer as it writes to the drive all the time.
    You then have a choice of taking your computer to a local PC/Mac repair shop, and say you need "Data Rescue" to recover deleted files out of a deleted Guest Account, it will cost a few hundred dollars.
    Or you can do it yourself, for a external hard drive (blank) and $100 Data Rescue type software.
    Create a data recovery/undelete external boot drive
    When you install OS X on a external drive, you won't be booting into OS X that has the deleted files, just the Recovery HD partiton that's seperate.

  • I cant view my photos.

    i cant view my photos. i can see them on small thumnails but i cannot click to view. it shows an exclamation mark????

    What version of the OS and of iPhoto '08? What has changed since it worked? where is your iPhoto library located? If on an external disk what format is it (hint it must be Mac OS extended (journaled)  ). Have you "cleaned up your Mac using any software - like CleanMyMac2 or MacKeeper or others (Hint - do not run clean up software - it is not needed and often causes major problems)
    If you have not cleaned up your Mac backup your iPhoto library and launch iPhoto while holding down the option and command keys until the first aid window appears - repair permissions and if needed repeat and rebuild your database
    LN

  • Unable to view sent photos

    suddenly, when people send me attached photos, I am unable to download or view them. all I get is something like this:
    ------=NextPart_001_014001C6F62D.01D8BB60
    Content-Transfer-Encoding: 7bit
    X-Apple-Content-Length: 1136
    Content-Type: text/plain;
    charset=US-ASCII
    Is there someway to reset the mail program to view the photos?
    thanks

    Bonnie,
    Welcome to the Discussions.
    What type of account do you have -- POP, IMAP or .mac?
    When you receive the message, is the message size large enough to indicate there is a photo attachment? You would need to have Size as one of the Columns selected under View, btw.
    It is more likely the result of something the sender is doing, but we need to check everything.
    If the answers to these questions don't help, then you can send me an email, and I will send you a test message with a known attachment type. My address can be found by clicking on my name to the left, and looking in the bio line of my Profile.
    Ernie

  • Some of the users Profile photo is not showing in sharepoint team sites

    Some of the users Profile photo is not showing in the list of SharePoint team site.
    In the people picker their picture is grayed out but if you click on their name it will direct you to their mysite and the picture is there.
    Can some body help on this.

    Try running:
    stsadm -o sync -deleteolddatabases 0
    Then, run the timer job named similar to "User Profile Service Application - User Profile to SharePoint Full Synchronization". Wait for it to complete, then re-check the profile photo on the SharePoint site.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How do I unblock all the profile photos on my Facebook page after I tried to block just one posting address?

    I left clicked on the picture message posted on Facebook, right clicked and selected 'Block Images from vthumb.ak.fbcdn.net' to delete that particular image. Then at the tool bar it said Mozilla Firefox will now block all images from vthumb.ak.fbcdn.net and then all the profile photos disappeared from all of my facebook pages and friends and I can't even get the pictures of new friends when I search through Facebook. How can I unblock them? Please help!!!!

    With Facebook on display, click on the [[site identity button]] and then on More Information. This will open up the page info dialog.
    First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
    Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.

  • I ran repair disk permissions an all my photos in aperture are gone. How can I get them back?

    I ran repair disk permissions an all my photos in aperture are gone. How can I get them back?

    If you've turned on "Find my iPhone" on the device you can track its location at iCloud. The device must be powered on and have internet access to be located.
    Doubtful you ever backed up your "camera roll" to iCloud but you may have backed it up to your computer via iTunes. You can "restore" that backup to your new iOS device but you can't view the contents of that backup and pick out pieces of it.

  • HT201406 I purchased a new iPad 3. When viewing Facebook photos a white ring in the center of the photo appears randomly. I can move photo around with finger and one ring stays in center of screen even on blank part of screen. Help.

    Has anyone experienced a white ring ( like a Cheerios or life saver candy shape)  frozen in center of screen when viewing Facebook photos? You ca move the picture around with your finger, even minimize it and the ring is in the center of the screen. It is random not on all photos as you swipe through them. Could be on any profile photos. When you click done and go back into photos it disappears on the photo or photos that had it previous , but may sow up again on other photos . Again it's a perfect shaped white ring in center of screen. Only on Facebook.

    Not familiar with that but it is worth trying a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • When I click to view my photos a question mark appears and will not let me view my picture. How do I fix this?

    When I click to view my photos a question mark appears and will not let me view my picture. How do I fix this?

    Suggests a permissions issue in the Library.
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to check and repair Library permissions

  • My facebook profile photo shows up on an email to a friend who has a yahoo email address, but is not my Facebook friend. All my FB privacy settings are at the max. Is this a Yahoo privacy issue? I don't want my photo to go to other than FB friends.

    I recently sent an email to a friend, who is NOT a Facebook friend, who has a yahoo email account, and my Facebook profile picture appeared next to the email. My privacy settings on FB only allow FB friends to see my photo. Why is another yahoo account that is not a FB friend seeing my profile photo and is there a Yahoo privacy setting that will eliminate this from happening? Thank you.
    == This happened ==
    Just once or twice
    == this week

    Did you check that your Facebook settings haven't changed?
    Facebook may have changed them as part of a software update.
    Is there a link in that email (signature) with a link to that picture?
    Try to send an email to yourself.

  • I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library from all of my devices?

    I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library and songs from MY phone ?

    this is not a reply - i asked the question - still trying to learn how all this works - someone please HELP ME

  • Can not view my photos in iPhoto. All photos are black

    I have an iPad 3 and I can not view my photos. I can view them through the photo stream on my phone but on my iPad they come up black. I'm not sure what to do.

    Anybody have any idea what's going on? Is gif supported? Should I be able to view gif photos? If I can't what might be going wrong, and what can I do to fix it?

Maybe you are looking for

  • Photos lost after Yosemite update/no backup

    I looked in my Masters folder too. Nothing. I have two Mac laptops and had enabled sharing. I'm so sick about this!

  • Adding new hard drive for Flash recovery area

    i am adding new hard drive for flash recovery area. How i can make single directory on that flash recovery area & how i can test that i am accessing that rightly , to that directory & flash back recovery area disk?

  • JSF page loading another JSF in iframe from same domain with diff port

    I was wondering if anyone has experienced this issue. I'm using ADF 11g and weblogic 10.3.2. Here's the scenario 1. two ADF 11g application, app1 and app2 2. app1 is deployed on managedserver1 running on port 7001 3. app2 is deployed on managedserver

  • 10.6 Server loginwindow crash

    Hi, I have a Mac Pro running Mac OS X Server 10.6.5. It was running fine until today when it crashed while trying to login. Now when I turn the server on I get a blue screen with a mouse for a few seconds and then a black spinning wheel like you see

  • JTable  and Renderer

    Hello guru, I have a JTable in my application and i have defined a renderer for the first column of my JTable. This is the code for this renderer public class LabelRenderer extends JLabel implements TableCellRenderer public Component getTableCellRend