Guest Portal appears again after successful login

I'm setting a Wireless Guest with a WLC 5508 (7.3) and ISE (1.1.2) -- (no anchor).
It appears to work (still some adjustments are required), but I found when the guest user log in, it receives the successful login screen and inmediately the guest portal again. If another browser window or tab is open, the user can browse properly.
I think I'm missing something.

Sorry for the delay! Were you able to figure out what was/is causing this? I have done many deployments and never had this issue before, unless something was misconstrued in a custom HTML portal. Couple of more questions:
1. Do you have the latest patch installed
2. Have you tried adding a new portal based on the pre-built templates and try it again

Similar Messages

  • Black screen after successful login into Remote Session

    Hi,
    I am having windows 8.1 pro(64bit) and windows 7 pro(64bit) machines using which i am trying to connect to a remote VM with windows 7 enterprise through vpn client 5(64bit). After successful login, BLACK SCREEN with Connection bar is displayed. Ctrl+Alt+End
    did not work.
    In fact, a strange behaviour experienced. After failing once, i tried again with IP address instead of host name. Bingo, it works well. Then disconnect and try to reconnect, problem repeats. What i mean is, the problem is neither Consistent not persistent.
    I am frustrated trying to solve the issue. Blogs, forums, communities.... where ever what ever solutions suggested, tried without any luck. Any help please ? Thanks in advance.

    Hi,
    Thank you for posting in Windows Server Forum.
    From your description it seems that you facing Black screen issue, but when you tried with IP address you can logon to the remote session but during reconnection issue repeats. Correct me if misunderstand your case.
    From last how may days you are facing this issue?
    Can you find any suitable error\event ID for this case?
    For this firstly please check that you have proper connectivity between systems. Please check that you can Ping successfully to the remote system with IP address and hostname. 
    Might this issue caused by some stopped service “Desktop window manager session” which stop after RDP login. You can check the status as follow.
    1. After the issue appear, please use RDP connect to the computer again and check the Desktop Window Manager Session Manager service status. 
    2. Then, please restar the computer and check System Event log to check if has a Desktop Window Manager Session Manager service error.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • ISE Wired guest portal redirect even after authentication

    Hi
    I have configured both Wired and Wireless guest authentication via guest portal. Wireless is working fine, however the when trying with Wired, the redireciton page is keep getting even after user authenticated.
    I'm not seen the redirection authorization policy in my logs however I can see only the user authentication logs (successful). Attached is my configuration and logging output.
    Here is what I see on the interface
    ABQT-3FLR-ACC-01#sh authentication sessions interface gigabitEthernet 4/0/19
                Interface:  GigabitEthernet4/0/19
              MAC Address:  a0b3.ccca.2ab1
               IP Address:  10.1.3.16
                User-Name:  A0-B3-CC-CA-2A-B1
                   Status:  Authz Success
                   Domain:  DATA
           Oper host mode:  multi-auth
         Oper control dir:  both
            Authorized By:  Authentication Server
              Vlan Policy:  N/A
         URL Redirect ACL:  ACL-WEBAUTH-REDIRECT
             URL Redirect:  https://xxxx-TW-ISE-2.xxx.xxx.qa:8443/guestportal/gateway?sessionId=AC14011F000001571E52779F&action=cwa
          Session timeout:  N/A
             Idle timeout:  N/A
        Common Session ID:  AC14011F000001571E52779F
          Acct Session ID:  0x00000309
                   Handle:  0xE6000158
    Runnable methods list:
           Method   State
           dot1x    Failed over
           mab      Authc Success
    Here is the ACL
    Extended IP access list ACL-WEBAUTH-REDIRECT
        10 deny udp any any eq domain (1344 matches)
        20 deny ip any host 172.20.5.12 (8122 matches)
        30 deny ip any host 172.20.5.14
        40 permit tcp any any eq www (3124 matches)
        50 permit tcp any any eq 443 (202927 matches)
        60 permit tcp any any eq 8080 (114 matches)
        70 permit ip any any (8056 matches)

    Hi Mohannad,
    Thanks for your response.
    Actually the as per the configuration it should work, I'm still trying to find out what is what has gone wrong with this configuration. Infact I have tested with 3560 switch with the same config and it worked. only difference here is we used 2960S switch.
    We need to find out why the next Auth policy is not hitting once user is authenticated.
    Here is the port configuration and the authen status of the port.
    ABQT-3FLR-ACC-01#sh running-config interface gig4/0/19
    Building configuration...
    Current configuration : 427 bytes
    interface GigabitEthernet4/0/19
    switchport access vlan 103
    switchport mode access
    switchport voice vlan 135
    authentication event fail action next-method
    authentication host-mode multi-auth
    authentication order dot1x mab
    authentication priority dot1x mab webauth
    authentication port-control auto
    authentication violation restrict
    mab
    dot1x pae authenticator
    dot1x timeout tx-period 10
    spanning-tree portfast
    end
    ABQT-3FLR-ACC-01#
    Mar 31 12:32:14.127: %AAA-3-BADSERVERTYPEERROR: Cannot process accounting server type tacacs+ (UNKNOWN)
    ABQT-3FLR-ACC-01#
    ABQT-3FLR-ACC-01#sh atuh
    ABQT-3FLR-ACC-01#sh atu
    ABQT-3FLR-ACC-01#sh authe
    ABQT-3FLR-ACC-01#sh authentication se
    ABQT-3FLR-ACC-01#sh authentication sessions in
    ABQT-3FLR-ACC-01#sh authentication sessions interface gi
    ABQT-3FLR-ACC-01#sh authentication sessions interface gigabitEthernet 4/0/19
                Interface:  GigabitEthernet4/0/19
              MAC Address:  0015.c5b4.fd4a
               IP Address:  10.1.3.23
                User-Name:  00-15-C5-B4-FD-4A
                   Status:  Authz Success
                   Domain:  DATA
           Oper host mode:  multi-auth
         Oper control dir:  both
            Authorized By:  Authentication Server
              Vlan Policy:  N/A
         URL Redirect ACL:  ACL-WEBAUTH-REDIRECT
             URL Redirect:  https://ABQ-TW-ISE-2.abq.gov.qa:8443/guestportal/gateway?sessionId=AC14011F0000018A32B4D906&action=cwa
          Session timeout:  N/A
             Idle timeout:  N/A
        Common Session ID:  AC14011F0000018A32B4D906
          Acct Session ID:  0x00000394
                   Handle:  0x3E00018B
    Runnable methods list:
           Method   State
           dot1x    Failed over
           mab      Authc Success

  • Company Portal not installing after successful enrolment

    Hey up guys,
    After some more advice please.
    So I have Intune integrated with SCCM and the Company Portal App is signed using the Symantec Cert, then imported and deployed to my Intune User Collection. So far so good.
    Now when we enrol a device (WP8 or WP8.1) it goes through ok and enrols successfully and any policies apply fine, however the company portal app never installs. I have tried emailing and installing and click "download hub" In workplace
    both of which do nothing at all, no errors - I have looked through here
    Company Portal not installed after enrolling but as I have said I don't get errors, the device enrols and policies apply just no Company POrtal App.
    Has anyone else experienced this before, are we missing something obvious?

    Hi, Aaron,
    You say you're using this with ConfigMgr, in what we call a Hybrid configuration. When you configured the Windows Phone MDM page in the Intune Subscription wizard, which did you upload- the PFX or the AET of your Symantec cert? Also, I'm assuming you're
    using your own Symantec cert and not the trial cert, but correct me if I'm wrong there because it matters.
    It sounds like you've tried this on at least 2 different devices, right? 8 and 8.1? Do you have a "clean" device you can try it on, one that hasn't been enrolled or unenrolled previously? If so,
    without enrolling, try mailing the .aetx (generated using the AET generator in the WinPhone SDK) and the SSP signed by the same cert and see if you can sideload that way. Just trying to eliminate
    as many variables as possible. If you take Intune completely out of the picture and just do the manual AET and SSP deployment and it
    still doesn't work, then there's something wrong with your ssp.xap - try downloading it again, in case it got corrupted, and then try signing it again. I swear a few times I've signed something, didn't get any errors, and it wasn't working. I had a
    tester sign it for me and it worked. Don't know why. You can even try signing any other .xap file you know works and see if you can sideload that.
    Cathy Moya PM, Windows Intune/System Center Configuration Manager This posting is provided AS IS with no warranties and confers no rights.

  • Lock entries appearing again after deleting

    Hi,
    I am deleting some old lock entries in SM12 but i dont know how , deleted entries are appearing again back. Can you please suggest how to tackle this problem.
    Thanks

    Hello....
    Just after deleting once it will rpompt are you really want to delete say yes..
    and Also check the SM04 tcode whether this is still present then hoppe this will solve ...
    Sas

  • GUEST Account Time Triggering after first login In WCS

    Hi,
    I just need to know that is WCS capable of creating guest account in a way that the starting time line can be triggered after first login
    Thanks

    Hi,
    I just need to know that is WCS capable of creating guest account in a way that the starting time line can be triggered after first login
    Thanks

  • Updates appear again after updating

    I have several of the photo apps from the App Store. Yesterday, I updated 18 of them. Today, 8 of those appear again for updating. I checked the versions and they are the same as the ones from yesterday. I use a Macbook (Snow Leopard) and an external hard drive as Hard Drive Copy using SuperDuper. I updated the backup after the App Store updates so the Apps should be the same version on both drives. What's happening? Thanks.

    Read the info in your link. Are those terminal commands? I've never used it.
    When I did my first backup with SuperDuper a week ago, I erased my Macbook's hard drive. Disk Utility found no problems with the hard drive, so I then restored it from the backup. Macbook has been running normally since then, except for the App Store problem. Do problems restore along with the other data?
    I see that I have App Store updates awaiting now - it is only one and not one of the previous.
    Thanks for the replies. I appreciate your time.

  • Deleted Photos appear again after iPhoto-Restart

    Hi,
    I am using a large iPhoto-Library from a Samba-shared directory. This works fine for a long time.
    I just realised that deleting of photos and events seems to be buggy:
    1. When tragging a Photo to iPhoto-trashbin in still appears as an events, but also in the trashbin. When deleting the content of the trashbin the event disappears
    2. The crasy thing is is appears again when reloading the app
    rebuilding of caches or anything doesn't help. I tried out a lot
    I checked out in the finder: The picture was never deleted from its original folder. I deleted it manually. Now the thumbnail appears, but the white '?' comes up, when opening the picture
    Anyone having the same probem?

    Hi,
    I am sorry that I was asking a question that was obvious to everyone.
    As I didn't found a solution to make a MacOsExtended Journaled filesystem on ubuntu to mount and share it with samba or nfs (HFS+ seems to be quite similar, but cannot be mounted rw) it tried something different:
    Instead of shareing the mounted filesystem through TCP/IP I am shareing the block-device now. I found an mac app that allows to act as iscsi initiator. To set up an LVM on ubuntu and make it in iscsi-divice is easy. Until now this works quite nice. I guess I will be able to use Timemachine though this mechanismn as well.
    I would like to suggest something to the apple-developers:
    It would be great to have a feature in iPhoto allowing use a local and a server-library. The local library only shows the Photos of the last 12 month or so, but the thumbnails of everything. Everytime you connect your server an automatic sync to the server library (containing everything) is done.
    Thanks a lot

  • TLN and content area are not visible after successful login

    Hi Gurus,
    I hav IE6.0 on my system with a localhost installed(EP6.0).The other configuration are: OS Windows XP Professional and Oracle 9.x on my PC. It is working fine.
    We are on EP7.0 in our organisation. Previously I was able to access the portal server, but after installing localhost I am havin problem accessing the EP7.0 server from my PC. Wherein I am able to access the same EP7.0 server from others' PC.Nobody is able to access EP7 server from my PC.
    Plz suggest some solution.
    Thanks a lot
    biroj......

    1.Refer the following threads
    Re: Browser compatibility
    Re: Using Mozilla & Safari
    Re: Do the BSP's work in Mozilla 1.7.3?
    https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000002212&_EVENT=DISPLAY
    2.Go to http://service.sap.com/PAM
    And select Netweaver from the right side and the contents get displayed. Now select the browser tab
    3.You can also  check the same from your installation folder.
    <>SAPNetWeaver04SneakPreviewSlimSP11DOChtmlsystemrequirements.htm
    Thanks
    Swathi
    pls reward points if was useful in any way

  • ISE 1.2 redirect to origin URL after successful login

    Hi, is there a possibility to redirect guests to the URL they tiped in, before they had to authenticate? We're running ISE 1.2., the webserver is running on it and after login the user has to retype the URL he wants to visit.. it would be great if the user would be automatically redirected..
    Thanks!
    KR

    ISE is set up to do this with the latest patch (Patch 5).  Now we are just waiting on new code for the rest of the NADs to implement this.
    Actually, support was added to 1.2 P5, but it is up to access devices to add the support for forwarding the URL in redirect request to ISE.  I believe WLC will be first to do so in 8.0 timeframe.

  • My recent items list appears again after restart. How do I delete it for good?

    When I turn on the computer, the recent items list still displays the documents and applications I worked with a few days ago. I delete it, and after restarting the computer, it displays the same list again (not a new list, but the exact same items over and over again).  Any tips?

    Select the iPod shuffle in the iTunes sidebar (under DEVICES).  If this is a current 4th (or 3rd) gen iPod shuffle, you should be able to see the contents of the shuffle by type, intented under the shuffle's name (still in the sidebar).  Select Music or Audiobooks (not sure where those items from the library will be listed).  The items will be listed to the right, for each category.  Find the items, select, and delete.
    It's on page 20 of the manual
    http://manuals.info.apple.com/en_US/iPod_shuffle_4thgen_User_Guide.pdf
    NOTE:  If this is an 1st or 2nd gen iPod shuffle, select the iPod shuffle in the iTunes sidebar (under DEVICES).  Over to the right, go to the Contents tab, where the items are listed.  Select and delete them from this list.
    I find it more convenient to make a playlist in iTunes with things I want to put on the shuffle.  I then set up automatic syncing (or use autofill) to have iTunes load the shuffle from that playlist, automatically.

  • In IE 11 version its not entering to the SharePoint site after successful login

    Dears,
    I have problem with in IE 11. My SharePoint have Windows authentication and Forms authentication modes.
    When I opened my SharePoint site its keep asking me to choose Windows Authentication Mode or Forms Authentication Mode. Once I select Windows authentication mode then it ask me credentials. Once I enter credentials then the IE again keep the same screen
    to choose windows authentication mode or forms authentication mode.My sharepoint site is working fine.
    I tested with Chrome & Mozilla. SharePoint site is login okay. but the problem is only with IE
    Support is appreciated.
    I am new to SharePoint

    Hi ShajiManj,
    Did this happen to all machines with IE11 browser? to all users?
    If it is only happening to the IE11 for all users (not Chrome and Firefox browser), you can check if the IE "Compatibility mode" could resolve this issue.
    If it is only happening to you, please reset the IE browser to default settings, then check results again.
    Thanks
    Daniel Yang
    TechNet Community Support

  • Exchange 2013 CU7 OWA 400 Bad Request after successful login

    Scenario:
    Exchange 2007/2013 Migration
    One
    Exchange 2007 Server [removed]
    One
    Exchange 2013 Server Std, Windows 2012
    All mailboxes moved to 2013
    - November 27-30 2014
    All public folders moved to
    2013 - December 2, 2014
    Exchange
    2007 is still running and has not been removed from the domain, yet. [update]
    Exchange
    2007 removed from domain - 12-13-14
    SSL
    Certs are current for: Autodiscover.ExtDom.com, ex13.ExtDom.com, ex13.IntDom.com
    Applied
    CU6 (Dec 3, 2014) to fix Mobile access issues. Since applying CU6, OWA does not work with the exception of mobile browsers (Chrome - Nexus 7) or Safari 5.1.7 on Windows 7. These browsers get the OWA 2010 theme (Yellow).
    User
    logs into OWA with Domain\UserName and PWD(IE). After clicking Sign In, page returns Bad Request. No errors logged in w3scv logs.
    [update]
    CU7 applied 12-11-2014
    All
    users can connect using Outlook 2013 or Mobile (iPhone & Android)
    Exchange
    Admin Center (ECP) still works!
    Browsers
    tested: IE10 (windows 7 x64),Chrome 39.0.2171.71m, Opera 26.0, FireFox 34.0.5, Safari 5.1.7
    Attempted:
    https://ex13.ExtDom.com/owa
    https://ex13.IntDom.com/owa
    https://ex13.ExtDom.com/owa?ExchClientVer=15
    https://ex13.IntDom.com/owa?ExchClientVer=15
    https://localhost/owa
    (on Ex 2013 server)
    https://localhost/owa?ExchClientVer=15
    (on Ex 2013 Server)
    Fixes
    attempted:
    remove
    | create Virtual Directories for OWA
    Change
    authentication through Exchange PowerShell - Integrated/Basic from FBA/Basic
    reverted
    since change didn’t work.
    Run
    UpdateCas.ps1
    Run
    UpdateConfigFiles.ps1
    IISReset
    (iisReset /NoForce fails)
    OWA
    (Default Web Site) displays as Version 15.0 (Build 995.29) in EAC. [update] Build 1044.25 (CU7)
    Links
    used for troubleshooting:
    http://community.spiceworks.com/topic/514617-exchange-2013-unable-to-login-to-owa-ecp
    https://social.technet.microsoft.com/Forums/ie/en-US/f8aa95d4-19e4-483c-8c4b-b039ab0d0127/400-bad-request-when-logging-in-to-owa-exchange-2013?forum=exchangesvrclients
    http://tecfused.com/2013/09/23/exchange-2013-ecp-double-login-error-400/
    https://social.technet.microsoft.com/Forums/lync/en-US/c25ce81c-76ea-471a-93ae-eeaf9e5015ac/exchange-2013-owa-error-400-bad-request?forum=exchangesvradmin
    http://support.microsoft.com/kb/2871485/en-gb

    Hi,
    Does it work if you disable the FBA and only use the basic authentication?
    Please also let us know the authentication settings on the Default Web site.
    Thanks,
    Simon Wu
    TechNet Community Support

  • How to change the size  of portal destop title  after user login

    hi,guys
    got a question,I want to change the title of desktop,but I found out this title been limited by portal.the size length is 20.
    in pf_desktop_instance table,the instance_title size is 20,so I changed it to 200,but still fail.so...does any guys handled this issue before.
    I am using dvt tool of oracle weblogic portal.
    thank you so much.
    regards
    aris

    I found the function from editTitle.js
         titleSave: function(newValue, oldValue) {
              var url = this.getUpdateUrl();
              this.oldValue = oldValue;
              var content = samples.dvt.Manager.getContentObject();
              content.title = newValue;
              alert(content.title);
              dojo.xhrPost({
                   url:          url,
                   mimetype:     "text/html",
                   content:     content,
                   load:          dojo.hitch(this, this.titleSaveLoad),
                   error:          dojo.hitch(this, this.titleSaveError)
    so,is that means this content truncate by dvt java code?
    if yes.where can i get dvt sourecode.thank you.
    if no,then how to fix this one.
    thank you.

  • Enterprise manager will not populate after successful login

    Hi Guys
    I have done a clean install on 11.1.1.6 and all I can get BIP, OBIEE Home and Weblogic fine. When I log onto Enterprise manager under http://host:port/em , I get to the log in screen and log in successfully but then I am not able to populate EM. I have tried changing the Browser to no avail.
    Please help

    user601798 wrote:
    Very helpful.
    But when asking for the Listener port number (during the emca create) where do I specify (if at all) the port I want the emctl agent to listen on? In the past I have used a port other than 1521 for the emctl agent, e.g. 1158 and 5502.
    http://docs.oracle.com/cd/B28359_01/server.111/b28319/emca.htm#BABJHAHA
    BTW - does this process (emca .... drop) bring down the database or does it require that the database be in another state besides 'open'. I ask this because I see from the logs that the process is 'queiscing' the database so I was wondering if all user sessions had to be terminated. Otherwise, this process will just 'sit there' as if doing a 'shutdown normal'. It is taking a while....
    Dec 13, 2012 5:19:28 AM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /u01/app/oracle/cfgtoollogs/emca/db1/emca_2012_12_13_05_19_08.log.
    Dec 13, 2012 5:19:29 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
    INFO: Stopping Database Control (this may take a while) ...
    Dec 13, 2012 5:19:35 AM oracle.sysman.emcp.EMReposConfig invoke
    INFO: Dropping the EM repository (this may take a while) ... <---?
    Database can remain up and running, but will be placed into quiesced mode -
    http://docs.oracle.com/cd/B28359_01/server.111/b28318/consist.htm#CNCPT1329
    This may take a while if the database is active
    ThanksHTH
    Srini

Maybe you are looking for