Guest User Log In Issue

Hello, I hope this is an easy fix...I would like to add a guest user account on my macbook. I did everything correctly in the step by step support page. When I power up it shows two login options, myself (admin) and guest. When I click on guest the screen just shakes, assuming it's telling me that I cannot log in as a guest.
Everything thing works fine when I log in as my user.
Any suggestions? I think it might be some kind of security setting or something that I did.
Thank you, JJ

Thank you for your reply and yes I tried that several times. I ended up disabling the guest account and just created a new user named "guest user"...quick fix.
And yes it sure does seem very simple, just click the box to enable guest...not in my case tho :-D

Similar Messages

Guest Users Log out.

I am using WLC 2504 with the software ver 7.4.121.0 and i am facing the problem with the guest user account it log out after connecting for a while. I am not understanding how to fix this issue.

Using the GUI to Configure a Session Timeout
To configure a session timeout for wireless clients on a WLAN using the controller GUI, follow these steps:
Step 1 Choose WLANs to open the WLANs page.
Step 2 Click the ID number of the WLAN for which you want to assign a session timeout.
Step 3 When the WLANs > Edit page appears, choose the Advanced tab. The WLANs > Edit (Advanced) page appears.
Step 4 Select the Enable Session Timeout check box to configure a session timeout for this WLAN. Otherwise, unselect the check box. The default value is selected.
In the Session Timeout text box, enter a value between 300 and 86400 seconds to specify the duration of the client session. The default value is 1800 seconds for the following Layer 2 security types: 802.1X, Static WEP+802.1X, WPA+WPA2 with 802.1X, CCKM, or 802.1X+CCKM authentication key management and 0 seconds for all other Layer 2 security types (Open WLAN/CKIP/Static WEP). A value of 0 is equivalent to no timeout.
Step 5 Click Apply to commit your changes.
Step 6 Click Save Configuration to save your changes.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0MR1/configuration/guide/wlc_cg70MR1/cg_wlan.html#pgfId-1262358

Guest user logging on automatically from jive forums quick link

Hi,
we are facing two problems with Jive Forums
1. Whenever I am trying to acecss Jive forums using the quick link it is automatically logging in with Guest user
2. I can see that no formatting is available this means I can see forms like general text not at all formatted.
could anybody let me know the solution. we are on EP 7.0 SP19
Thanks
Karunakar.M

problem resolved

User log in issue with Xcelsius SWF file

HI,
I am using the BI as source to BO. Xcelsius dashboard is using webi data by live office.
I have exported the xcelsius in swf file & ppt format.
i am using the credentials user name, password and authentication as SAP.
I have the roles which are created in BI and imported to BO and the roles have users in BI , which came by default to BO.
Now I have created the new users in BI with initial password. I cant login to infoview or swf until i change the initial password in BI and thn with new password i can log in to BO. I understood this concept.
But confusing part is after changing to new password in BI, i can be able to log in to swf or PPT but not fetching latest data from data base.
if i log on first into infoview , thn i can be able to log onto swf file or PPT correctly and access the latest data.
If i directly access the ppt file , i get 'failed to get the document information. lo 26315". But if i login to infoview first then to swf or ppt i wont get any problem.
The problem is, users are access the dashboard file from ppt and pdf. So , is there any work around that, the new user can directly access the data from swf or ppt, without entering the infoview???

Hi sapbi83 ,
May i Know which connection you are using for fetching data into xcelsius, is it LO(Live Office) or Qaaws
if it is Live Office then what is the refresh property set for live office object? and how many live office objects or how many qaaws connection u are using.?
provide the answe of all the above question, i'll be able to help you and Infoview has nothing to do it with the real time data connectivity. the dashboard is completely dependent on the connections used to get data into the xcelsius, if the error is coming in PPT or PDF standalone then there is some issue with the connection used in xcelsius, just let me know the answer of all the above questions.

User Log-in Issue in SAP (urgent)

Dear SAP Experts,
In our concern, we have more users in several departments. Now We would like to reduce the log in and log out for users.
but We are having 20 SAP User license only.
Tell us your suggest
Either we have club the work minimize logging.
or
We have to buy new user license.
thanks n regards
Ramana

Total 10 persons available.
Vendor Master - Display
Material Master - Display
Condition Master - Display
Inforecord - Display
Maintain Source List
Display Source List
Purchase Req - Create
Purchase Req - Change
Purchase Req - Display
Purchase Req - Release
Purchase Order - Create
Purchase Order - Change
Purchase Order - Display
Purchase Order - Release
Stores Dept Transactions
Goods Receipt for PO/Return Delivery to Vendor
Transfer Posting
Goods Issue
Inventory Stock Reports
Display material document
Capture of Excise Invoice
Create/Change/Display Depot Excise Invoice
Create Sub-contracting challan
Change Sub-contracting challan
Display Sub-contracting challan
Reconcile Sub-Conrating challan
Complete/Reversals/Recredit of S/C Challan
Depot Stock With Balances
Annexure IV Report
Excise Dept Transactions
Excise Master Maintainance
Update RG1 Register
Extract & Print Excise Registers
Create Tax Code
Sales Tax register
Reversal of Excise duty for rejected items
Change/Posting of Excise Invoice
Monthly Utilization
Excise JV'S
List of Excise Invoices
Invoice Verificaiton
Enter Invoice
Park Invoice
Invoice Verification in Back Ground
Display invoice Document
Cancel Invoice Document
Release Block invoices
Display list of invoices
Invoice Overview
Output Messages
Evaluated Receipt Settlement
Automatic Delivery cost settlement
Invoicing plan Settlement
GR/IR account Maintaince
Display/Cancel Account Maintaince Transaction
Change Material document
Enter Goods Issue
Enter Transfer posting
Enter other goods receipt
Create Reservation
Change Reservation
Display Reservation
List Display Reservations
Reservation list inventory management
Goods receipt for order
Plant Stock Availability
Stock on posting date
Shelf life list
Output from goods movement
Stocks at sub contractor
Enter return delivery
Cancel material document
Material analysis-stock selection
Material analysis-receipts/issues-selection
key figure:Slow moving terms
Key figure:stock value
Key figure-Dead stock
Stock requirements list
Changes to source list
Reorganize source list
Source list for material
Changes to purchasing info record
Quotation price history
Info records per vendor
Info records per material
Purchase order price history
Release(Approve) purchasing documents
Purchasing documents for material group
Purchasing documents per project
Purchasing documents per account assignment
Purchasing documents per vendor
Purchasing documents for material
Purchasing documents per document no.
SC stock monitoring for vendor
Purchasing documents per supplying plant
Create Contract
Change Contract
Display Contract
Purchasing documents for material group
Purchasing documents per vendor
Purchasing documents for material
Create RFQ
Change RFQ
Display RFQ
Maintain Quotation
Display Quotation
Price comparison list
Purchasing documents per requirement tracking no.
Purchasing documents for material group
Purchasing documents per vendor
Purchasing documents for material
Purchasing documents per document no.
RFQs per collective no.
Release:Purchase requisition
Collective release of purchase requisitions
Assign source of supply to requisitions
Assign and process purchase requisitions
Ordering:Assigned purchase requisitions
Automatic creation of purchase orders from requisitions
List display of purchase requisitions
List display of purchase requisitions
Maintain vendor evaluation
Calculate scores for semi automatic & automatic sub criteria
Evaluation Comparison
Ranking list of vendors
General evaluations
Analysis of purchase order values
Message output
Message output
Create physical inventory document
Change physical inventory document
Display physical inventory document
Enter inventory count
Change inventory count
Display inventory count
Post inventory difference
Post count and difference
Enter recount
List of inventory differences
Print physical inventory document
Physical inventory list
Selected data for physical inventory documents w/o special stock
Display vendor
Service entry sheet
Display changes
Extend material view(s)
Materials list
Close period for material master records
Price change
Debit/credit material
Revaluation with logistics invoice verification
Display inspection lot
Display usage decision
Inspection lot selection
Create quality cert receipt
Change quality certificate
Display quality certificate
Record results
Change results
Display results
Result printout
Display QM Info Record
QM Info Record Collective Processing
Create notification
Change notification
Display notification
Display inspection plan
Task list changes
Display master inspection characteristic version
Display material specification
Maintain Service Master
Display Line Items (Vendor)
Display Balances (Vendor)
Due Date Analysis for Open Items
List of Vendor Line Items
Print Subcontracting Challan
Country India Localization Menu
Down Payment Request - Header Data.
List of Vendors Purchasing.
Information System
Create Vendor (Centrally)
Change Vendor (Centrally).
Display Vendor (Centrally)
Vendor Account Changes.
Block / Unblock Vendor.
Flag for Deletion Vendor.
Change Account Group.
Create Vendor.
Change Vendor
Vendor Account Changes.
Block / Unblock Vendor.
Flag for Deletion Vendor.
Planned Vendor.
Planned Vendor A/C. Changes.
Display in future Vendor.
Create Info Record
Change Info Record.
Changes to Purchasing Info Record.
Flag Info Record for Deletion.
Change Document.
Invco. Stck/reqt. Analysis - Selection.
Purchase Register.
Converting SAP Script (OTF) or ABAP List Spool job to PDF.
Display Document.
Pick list
Message Output.
ME6G - Vendor Evaluation in the Background
MMRV - Allow Posting to Previous Period
Purchase Requisition
SPRO - Customizing - Edit Project
IW33 - Display PM Order
QI02 - Change qual.information - purchasing
QI01 - Create quality info. - purchasing
QI03 - Display quality info. - purchasing
MSC3N - Display Batch
MASS - Mass Change
IK03 - Display Measuring Point
MB26 - Picking list
ME9A - Message Output: RFQs
SP02 - Display Spool Requests
ML81N - Service Entry Sheet
ZPDF - Create PDF Files from Spool Request
FB03 - Display Accounting Documents
Purchase Register
Release Purchase Requisition
Stck/Reqt Analysis Selection
Release Purchase Order
Release purchase order

Guest user account logged into while away from house/computer!!!

Warning: I am not a tech-pro!
Okay, I have a 2011 Mac Book Pro running OS X LION 10.75 (11G63) unsure what those last numbers mean but they were there so I thought perhaps it might be helpful to add them.
Recently I moved into a granny flat and pay $10 a week to use their unlimited internet wifi. I log into my wifi through this device called a WiFi Repeater? It's plugged into the wall in my unit, as I warned I am not incredibly tech savvy so I am only guessing when I say I suppose this extends the main wifi signal from the actual home owners upstairs big modem? Any who.... A few times I have seen in the Finder Memu ot says 'Shared' and under that 'Wendys PC' (Wendy is the homeowner) then if you click on it it tries to connect but won't or there is a 'Connect As' option which brings up a little screen saying - connect as wendy, which requires a password or connect as guest which doesn't look like it requires a password- I'm not certain because I've never tried to connect any further, I only pressed that initial connect button when I had mentioned to Wendy I could see her PC & she asked me to press connect & prove I could not in fact connect (I'm starting to despise the word 'connect' since having to type this post about connection). So... We just kind of let it go. It did really worry me that Wendy (who worked in the tech field for years in particular with an Internet provider, could possibly connect to my computer and nosey through all my files- and to be honest, that would not actually suprise me. She is incredibly 'inquisitive'... And that's putting it mildly. I do have a password on my Mac Book Pro but I don't think that would be that hard to break through/hack if you have the knowledge/software. And yes, I do have confidential files on there! Banking/business/private photos (I'm trying to lose weight so take one nude photo per day to do a time lapse of myself in a year or two- obviously for myself not for others eyes lol and I would literally die in the *** if someone ever saw these). So basically I have good reason to protect my privacy. As does everyone! Anyway my first question is - Could she log in and how could I tell if she had? Now, the second part of this ridiculously long question (my apologies) is I was logged into my personal account all last night & this morning. As I stated- it IS password protected. The user account is not. Before I went out (and I can't actually recall if I closed the lid or not when I rushed out today... Usually I do but maybe I didnt... Whatevs) So, I get home and activate the screen by moving my finger on the touch pad and lo & behold I'm straight away looking at a totally different screen? It took me a few seconds to realise why my desktop looked completely different with none of my files etc... It was - as you've probably guessed- because I was in fact in the guest user account. Now, I didn't even have to click ON 'Guest User' as I normally have to. When you turn my Mac on it always comes up with - 'My Full Name' (one account login) and then 'Guest User' (the second account login option).... So you HAVE to choose which one you want! But my screen was straight away logged into the Guest Users desktop! I did NOT do this guys! So, of course now I'm extremely concerned that either she, her husband or their son whom is visiting for the weekend - have either a) logged in remotely on one of their computers or b) have come into my home and tried logging in & then forgot to log out of the guest account. I want to know if there is any way to find out what they did, what they opened if they did, how to stop it from both happening at all or if my suspicions are in fact happeninh AGAIN And I guess on a more personal, less tech involved note - how would you all deal with such a situation? Let it go? Or be upfront about the fears/concerns I am experiencing since moving in just over a month ago. AND most importantly - IS there any other reason -other than someone physically logging into my guest user account & failing/forgetting to log back out so that when I got home & activated my screen I was actually looking at the guest user desktop's account instead of the Mail application screen in the 'My Full Name' password protected user account where I had actually left it before rushing out.... Like, is there ANY other possibly explanation for my user account being logged into when I'd left it on my own account t before I left that doesn't include someone in the house hacking/breaking into/snooping through my Mac? Also- you should understand that when I leave my Mac for just a few minutes I have it set up so that the computer screen 'sleeps' (I'm assuming that's the correct term) so that if for instance -exactly like this morning- I have to rush out and don't want to/don't have time to save work/quit applications/shut down etc... I can walk away leaving the laptop as is knowing within a few minutes the screen saver comes up (and if that's ledr for long enough it goes into sleep mode) and no one can actually enter my private account without my password. I feel safe knowing that.
Sorry.... I FELT safe.
I'm truly sorry for how long-winded this question has become, I simply wanted to give anyone possibly willing to help me sort out this issue, as much information as possible. I think I have actually only posted here once before (I find these sort of forums quite intimidating) and I often see people getting bashed for not providing enough information. So, I'm pretty sure I'll get picked on for too many words if anything!!?! Lol
Thank you, in advance for your help!
Olivia;-).

Ouch.
Not easily. You could try data recovery software... maybe SubRosaSoft's File Salvage or the like.

Guest users in WLC are not logged out after pre defined time.

Hi,
My customer wants to create guest users in wireless lan controller. We were successfully able to create that and it worked . But the problem is that to access the internet the users have to change the "proxy server" settings on the internet explorer. As a result the guest users are not logged out automatically after the pre defined amount of time. We enabled " by pass proxy server " settings in internet explorer also, unfortunately it didnt work too.
If we disable the proxy settings in internet explorer customers were logged out, but the problem is that once the customer log in he will change the proxy settings in internet explorer to browse net but wont get disconnect unless and untill he manually change the proxy settings in the internet explorer.
Is there any other way to solve this issue? Can any one provide any alternative solution if possible.
Regards,
Bibin

Can you explain how your proxy server has anything to do with your wireless access duration?
Does you proxy server have the logic that stops the internet access after a period of time? If so, I assume you turn proxy off in order to web-authenticate? If so, then you just need to tell the browser to not proxy for the virtual IP address of the WLC. You'll never get redirected to the webauth page if you don't send a https request to it (as if, your browser is sending it the IP of your proxy server).

How can I find the IP address of guest users who log on to my Adobe Connect Meeting?

We had an Adobe Connect meeting that was open for guest users to log in under generic user names. Does the Adobe Connect meeting log keep the IP address or other identifiable information for these guest users?

Footprints will track and report the User IP's.
http://www.refineddata.com/index.php?option=com_content&view=article&id=62:footprints&cati d=43:custom-pods&Itemid=62

I'm new to Mac, have had for approx. I put my iPhone and iPad and my wifes in iTunes and now when i start my system on. I now have a Guest user show up at the log on screen. Is this normal. And how can I take it off.   Tried the help and no luck

I'm new to Mac, have had for approx. I put my iPhone and iPad and my wifes in iTunes and now when i start my system on. I now have a Guest user show up at the log on screen. Is this normal. And how can I take it off.   Tried the help and no luck

Tatanka11 wrote:
I'm new to Mac,...
Then... You may find these Links of Interest and Value...
Show me how to set up my Mac.
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/     Switching from PC
http://www.apple.com/findouthow/mac/
Enjoy your Mac...

Send mail to the user who logged the issue

Hi,
As it is currently the mail goes to the key user, which is a business partner. That is an organization. However several users are maintained under a business partner.
So now the mail goes to all these users at a status change. However can we only have the user who logged the issue getting the mail. Can you please advice me on how to get this?
Thanks loads.
Keshi

Hi.. Thanks for all ur replies..
Yes we hv assigned the key user as a business partner which is an organization,, This is also and requirement,
But since the mail is activated as to the key user it goes to all the users in that group, under teh business partner.
But when configuring this came across the Partner, in which we selected it as key user. But there were also other partners as Creator,Reported by etc..
I tried using both these but again it didnt work. Can anyone suggest anything?
Yes, when u assign the key user as a business partner and assign several users to it you can send multiple mails to users
Any help on this is very much appreciated,.,
Thanks all for replying once again.
Keshi

Enterprise Portal Log off Issue for External User

Hello
We are facing a Enterprise Portal log off issue for one of our external users.
User is logged in and clicks on the "Log Off" link .
User is prompted as seen below:
Are you sure you want to logg off?
Choose Yes or No
Click on Yes and popup window goes away and nothing else happens.
These problems logg off issue problem happening on Internet Explorer 6 but from from firefox browser, its working.
Also popups are not blocked on IE.
EP version with SP level is EP 7.00 SP12.
Even though from Internet explorer 6, i can log in and log off with internal user.
Please advise for the log off problem .

Hello
I added the value ume.logoff.redirect.url =https://poqwas.synenco.com/irj/portal
on Config Tool Global Paramter settings.
Then restart the server.
But I am getting the same problem.when I login with external user ID, then make log off. Nothin Happen...
Please advise

Why does 'Guest User' appear in a foreign language when logged in as guest?

Why does 'Guest User' appear in a foreign language when logged in as guest? It's not a major problem but it would be nice to be able to fix it, and to understand how it happened.
Everything else is in English (or set to English) as far as I can see, and my Macbook is only a couple of weeks old. All system updates have been performed and permissions have been repaired.
It displays it in Finnish (Suomi) as 'Vierastilin käyttäjä' only when logged in, in the System Preferencess user list and apple menu (where you would normally select 'Log Out Guest User'). I cant find anyone else with the same problem online. I am in the UK, purchased the Macbook on the UK Apple Store online, and I have never been to Finland or selected anything to do with Finland or its language. Everything else is in English.
I should add that 'Vierastilin' showed up instead of 'Guest User' on the OSX login screen on the first day I had the Macbook, but this seemed to fix itself somehow soon after.
A couple of photos to illustrate the problem that still exists are attached.

Thanks for the reply. I only have English - Primary but I guess I could add Finland and then delete it...
Okay, tried that, lots of variations including deleting all other languages and only using Finnish, and then using only British English etc - when guest is in Finnish the whole lot becomes Finnish/Suomi (see attached photos to compare with the ones above) - then when you delete Finnish and go back to English, everything is Englisg apart from 'Vierastilin käyttäjä' as above.
Any other ideas where it stores that info - is there a dodgy preference file somewhere which needs zapping?

My macbook pro will only let me log into guest user?!?!

So I go to put my admin and password in but all i have access to is 'guest user' I'm in agony!

dana2208 wrote:
My MacBook Pro will not let me log on. How do I fix this? Can apple reset it?
Yes.
Password doesn't work?
If so, try resetting it. If the computer is having any other problem, take it to the Apple store to have it checked out.
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.
Best.

New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

The built-in guest user account will not do this. Simply create a new standard account and call it "Guest" or "Guest Users" or whatever you like.
Go to System Preferences > Users& Groups, click "+" to make a new account.

Wireless Guest Users DHCP issue

Dear all
We have 2 wism as well as Anchor controller
Guest users are getting ip address from anchor controller.
We had created DHCP scope on anchor controller itself.
We had opened particular ports to communicate between guest controller and inside controller for EOIP tunneling to take place.
Issue is that some times user is getting IP address in the range of AP management vlan.
Do we require to open ports for bootpc and bootps as well or do we need to create dhcp scope in the switch.
If any one has faced the above issue pls reply me at the earliest.
Regards
-Danish

If the anchor goes down, or mobility fails, the user should never egress from the Foreign WLC (in my opinion). However, if you are saying that the user gets an IP from the MGMT Interface of the Foreign WLC (not the Anchor), then it is doing exactly what it shouldn't.
What version of code is this?
I've seen a lot of deployments implement a "dummy interface" on the Foreign WLC. So a fake vlan/subnet is created on the WLC and mapped as the default interface for the Foreign's Guest WLAN. In the event anchoring does fail and the client sticks to the foreign WLC this dummy interface would actually prevent the user from having network access.
Are you seeing this often?

Guest User Log In Issue

Similar Messages

Maybe you are looking for