Guest Wireless Users Not Able to Get to NAC Guest Server
First of all, I appreciate any of the help that can be offered on the post. Your solutions and suggestions have been valuable, in the past!
Here's the scenario. I have two internal WLC's, and one anchor mobility server, in the DMZ. The internal controllers are part of the 10.x.x.x range, while the DMZ WLC is in the 192.168.1.x range. We also have a NAC Guest Server, in the DMZ that has a 192.168.1.x address. Here's the problem, when a guest user uses our guest SSID, they're assigned a 172.16.x.x address, their traffic is intercepted, and they're presented with a login page. If they don't have login credentials, there's a "Register Here" link that takes them to the NAC Guest Server to self-register. When they click the "Register Here" link, for some reason they can't get to the NAC guest server. If I bring up a command prompt, and type in "telnet 192.168.1.x 80", it connects. The odd thing is that when I was testing, if I login with guest credentials, and then try to go to the NAC Guest Server self-service page, I can get to it with no problem. Would anyone have any ideas as to why?
I may have missed something here, but isn't the point of the guest portal that you can't get anywhere on the network (except the guest portal) until you have authenticated?
Similar Messages
-
Not able to get file from application server with read dataset
Hi,
Firstly i download a file from application server from read data set and then i sent this file as attachment. But problem is that i am able to send .jpg .bmp file but i am not able to send .pdf or .doc file so what can i do for that. ?
My code is like below...
DATA : PATH TYPE STRING.
DATA: E_FILE LIKE RLGRAP-FILENAME.
CONCATENATE '/tmp/' NAME_WITH_EXT INTO E_FILE SEPARATED BY SPACE.
CONDENSE E_FILE NO-GAPS.
IF EXTENSION = 'TXT'.
OPEN DATASET E_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT WITH WINDOWS LINEFEED . " MESSAGE MSG.
IF SY-SUBRC <> 0.
WRITE: SY-SUBRC, MSG, ' LIKE ', C_FNAME.
ELSE.
WHILE SY-SUBRC = 0.
READ DATASET E_FILE INTO WA_C.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND WA_C TO IT_C.
ENDWHILE.
CLOSE DATASET E_FILE.
ENDIF.
ELSE.
OPEN DATASET E_FILE FOR INPUT IN BINARY MODE. " ENCODING DEFAULT. " INPUT IN BINARY MODE . " TEXT MODE ENCODING NON-UNICODE.
IF SY-SUBRC = 0.
DO .
READ DATASET E_FILE INTO GS_PDF_TAB.
IF SY-SUBRC = 0.
APPEND GS_PDF_TAB TO GT_PDF_TAB.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET E_FILE.
ENDIF.
ENDIF.
Regards,
Gurprit Bhatiadelete this line DEFAULT WITH WINDOWS LINEFEED and check this..
-
User not able to connect to the WIreless
We are facing the issue with a client he is getting the Ip but we are not able to ping even it fails to get the lenk test from the WLC.AP is registered to the Centralised WLC and other users are able to get the access with out any problem .Below are the loggs i got for the user .
debug client 1c:65:9d:a4:ea:b6
(Cisco Controller) >*DHCP Socket Task: Dec 05 09:47:07.361: 8c:70:5a:c6:86:28 DHCP received op BOOTREPLY (2) (len 330,vlan 0, port 13, encap 0xec03)
*emWeb: Dec 06 08:20:19.255: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
*emWeb: Dec 06 08:20:19.256: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
*emWeb: Dec 06 08:20:19.259: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
(Cisco Controller) >debug client 1c:65:9d:a4:ea:b6
(Cisco Controller) >*apfMsConnTask_6: Dec 06 08:21:19.495: 1c:65:9d:a4:ea:b6 Association received from mobile on BSSID 20:37:06:7c:53:a0
*apfMsConnTask_6: Dec 06 08:21:19.498: 1c:65:9d:a4:ea:b6 Global 200 Clients are allowed to AP radio
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Max Client Trap Threshold: 0 cur: 18
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Rf profile 600 Clients are allowed to AP wlan
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Re-applying interface policy for client
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2164)
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2185)
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 In processSsidIE:4619 setting Central switched to FALSE
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Applying site-specific Local Bridging override for station 1c:65:9d:a4:ea:b6 - vapId 1, site 'default-group', interface 'management'
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Applying Local Bridging Interface Policy for station 1c:65:9d:a4:ea:b6 - vlan 0, interface id 0, interface 'management'
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 STA - rates (8): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 STA - rates (12): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Processing RSN IE type 48, length 20 for mobile 1c:65:9d:a4:ea:b6
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Received RSN IE with 0 PMKIDs from mobile 1c:65:9d:a4:ea:b6
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Found an cache entry for BSSID 20:37:06:7c:53:a0 in PMKID cache at index 0 of station 1c:65:9d:a4:ea:b6
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Removing BSSID 20:37:06:7c:53:a0 from PMKID cache of station 1c:65:9d:a4:ea:b6
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Resetting MSCB PMK Cache Entry 0 for station 1c:65:9d:a4:ea:b6
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Setting active key cache index 0 ---> 8
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 unsetting PmkIdValidatedByAp
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 apfMsRunStateDec
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 apfMs1xStateDec
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Change state to START (0) last state RUN (20)
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 START (0) Initializing policy
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 START (0) Change state to AUTHCHECK (2) last state START (0)
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) DHCP required on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1for this client
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Not Using WMM Compliance code qosCap 00
*apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1 flex-acl-name:
*apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
*apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 apfPemAddUser2:session timeout forstation 1c:65:9d:a4:ea:b6 - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is 0
*apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
*apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 Sending Assoc Response to station on BSSID 20:37:06:7c:53:a0 (status 0) ApVapId 1 Slot 0
*apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 apfProcessAssocReq (apf_80211.c:7957) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
*apfMsConnTask_6: Dec 06 08:21:19.510: 1c:65:9d:a4:ea:b6 Updating AID for REAP AP Client 20:37:06:7c:53:a0 - AID ===> 7
*dot1xMsgTask: Dec 06 08:21:19.511: 1c:65:9d:a4:ea:b6 Disable re-auth, use PMK lifetime.
*dot1xMsgTask: Dec 06 08:21:19.511: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Connecting state
*dot1xMsgTask: Dec 06 08:21:19.511: 1c:65:9d:a4:ea:b6 Sending EAP-Request/Identity to mobile 1c:65:9d:a4:ea:b6 (EAP Id 1)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.010: 1c:65:9d:a4:ea:b6 Received EAPOL START from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.010: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Connecting state
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.010: 1c:65:9d:a4:ea:b6 Sending EAP-Request/Identity to mobile 1c:65:9d:a4:ea:b6 (EAP Id 2)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 Received Identity Response (count=2) from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 EAP State update from Connecting to Authenticating for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Authenticating state
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=160) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 WARNING: updated EAP-Identifier 2 ===> 160 for STA 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 160)
*apfMsConnTask_6: Dec 06 08:21:20.031: 1c:65:9d:a4:ea:b6 Association received from mobile on BSSID 20:37:06:7c:53:a0
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Global 200 Clients are allowed to AP radio
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Max Client Trap Threshold: 0 cur: 19
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Rf profile 600 Clients are allowed to AP wlan
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Re-applying interface policy for client
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2164)
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2185)
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 In processSsidIE:4619 setting Central switched to FALSE
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Applying site-specific Local Bridging override for station 1c:65:9d:a4:ea:b6 - vapId 1, site 'default-group', interface 'management'
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Applying Local Bridging Interface Policy for station 1c:65:9d:a4:ea:b6 - vlan 0, interface id 0, interface 'management'
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 STA - rates (8): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 STA - rates (12): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Processing RSN IE type 48, length 20 for mobile 1c:65:9d:a4:ea:b6
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Received RSN IE with 0 PMKIDs from mobile 1c:65:9d:a4:ea:b6
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Setting active key cache index 8 ---> 8
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 unsetting PmkIdValidatedByAp
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Initializing policy
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) DHCP required on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1for this client
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Not Using WMM Compliance code qosCap 00
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1 flex-acl-name:
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 apfPemAddUser2:session timeout forstation 1c:65:9d:a4:ea:b6 - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is 0
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
*apfMsConnTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Sending Assoc Response to station on BSSID 20:37:06:7c:53:a0 (status 0) ApVapId 1 Slot 0
*apfMsConnTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 apfProcessAssocReq (apf_80211.c:7957) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 160, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*dot1xMsgTask: Dec 06 08:21:20.038: 1c:65:9d:a4:ea:b6 Disable re-auth, use PMK lifetime.
*dot1xMsgTask: Dec 06 08:21:20.038: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Connecting state
*dot1xMsgTask: Dec 06 08:21:20.038: 1c:65:9d:a4:ea:b6 Sending EAP-Request/Identity to mobile 1c:65:9d:a4:ea:b6 (EAP Id 1)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 Received Identity Response (count=1) from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 EAP State update from Connecting to Authenticating for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Authenticating state
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=161) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 WARNING: updated EAP-Identifier 1 ===> 161 for STA 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 161)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.063: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.063: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 161, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.064: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.068: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.068: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=162) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.068: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 162)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.083: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.083: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 162, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.083: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.087: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.087: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=163) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.087: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 163)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.111: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.111: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 163, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.111: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.166: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.167: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=164) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.167: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 164)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.173: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.173: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 164, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.173: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.179: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.179: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=165) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.179: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 165)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.184: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.184: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 165, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.184: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.189: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.189: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=166) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.189: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 166)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.200: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.200: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 166, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.200: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.204: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.204: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=167) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.204: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 167)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.216: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.216: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 167, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.216: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.718: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.718: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=168) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.718: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 168)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.725: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.725: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 168, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.725: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.731: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.731: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=169) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.731: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 169)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.738: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.738: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 169, EAP Type 25)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.738: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.746: 1c:65:9d:a4:ea:b6 Processing Access-Accept for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.746: 1c:65:9d:a4:ea:b6 Resetting web IPv4 acl from 255 to 255
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.746: 1c:65:9d:a4:ea:b6 Resetting web IPv4 Flex acl from 65535 to 65535
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Setting re-auth timeout to 0 seconds, got from WLAN config.
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Station 1c:65:9d:a4:ea:b6 setting dot1x reauth timeout = 0
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Stopping reauth timeout for 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Creating a PKC PMKID Cache entry for station 1c:65:9d:a4:ea:b6 (RSN 2)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Resetting MSCB PMK Cache Entry 0 for station 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Setting active key cache index 8 ---> 8
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Setting active key cache index 8 ---> 0
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Adding BSSID 20:37:06:7c:53:a0 to PMKID cache at index 0 for station 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: New PMKID: (16)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: [0000] 8a 3e dc 82 7b 6b ce 00 72 ac 5d be 2a 12 ab a6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Disabling re-auth since PMK lifetime can take care of same.
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 unsetting PmkIdValidatedByAp
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 PMK sent to mobility group
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Sending EAP-Success to mobile 1c:65:9d:a4:ea:b6 (EAP Id 169)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Freeing AAACB from Dot1xCB as AAA auth is done for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Found an cache entry for BSSID 20:37:06:7c:53:a0 in PMKID cache at index 0 of station 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Found an cache entry for BSSID 20:37:06:7c:53:a0 in PMKID cache at index 0 of station 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: Including PMKID in M1 (16)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: [0000] 8a 3e dc 82 7b 6b ce 00 72 ac 5d be 2a 12 ab a6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Starting key exchange to mobile 1c:65:9d:a4:ea:b6, data packets will be dropped
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Sending EAPOL-Key Message to mobile 1c:65:9d:a4:ea:b6
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.749: 1c:65:9d:a4:ea:b6 Entering Backend Auth Success state (id=169) for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.749: 1c:65:9d:a4:ea:b6 Received Auth Success while in Authenticating state for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.749: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Authenticated state
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Received EAPOL-Key from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Received EAPOL-key in PTK_START state (message 2) from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 PMK: Sending cache add
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Stopping retransmission timer for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.767: 1c:65:9d:a4:ea:b6 Sending EAPOL-Key Message to mobile 1c:65:9d:a4:ea:b6
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.773: 1c:65:9d:a4:ea:b6 Received EAPOL-Key from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.773: 1c:65:9d:a4:ea:b6 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.773: 1c:65:9d:a4:ea:b6 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 Stopping retransmission timer for mobile 1c:65:9d:a4:ea:b6
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 apfMs1xStateInc
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 L2AUTHCOMPLETE (4) DHCP required on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1for this client
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 Not Using WMM Compliance code qosCap 00
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1 flex-acl-name:
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 apfMsRunStateInc
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 L2AUTHCOMPLETE (4) Change state to RUN (20) last state L2AUTHCOMPLETE (4)
*Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Reached PLUMBFASTPATH: from line 6233
*DHCP Socket Task: Dec 06 08:21:20.796: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
*DHCP Socket Task: Dec 06 08:21:20.800: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
*DHCP Socket Task: Dec 06 08:21:20.800: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
*DHCP Socket Task: Dec 06 08:21:20.816: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
*DHCP Socket Task: Dec 06 08:21:20.817: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
*DHCP Socket Task: Dec 06 08:21:20.817: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
*DHCP Socket Task: Dec 06 08:21:24.515: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
*DHCP Socket Task: Dec 06 08:21:24.517: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
*DHCP Socket Task: Dec 06 08:21:24.517: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
*DHCP Socket Task: Dec 06 08:21:24.520: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
*DHCP Socket Task: Dec 06 08:21:24.520: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
*DHCP Socket Task: Dec 06 08:21:24.520: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
*emWeb: Dec 06 08:21:52.267: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
*emWeb: Dec 06 08:21:52.270: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
(Cisco Controller) >undebug
Incorrect usage. Use the '?' or <TAB> key to list commands.
(Cisco Controller) >*emWeb: Dec 06 08:21:52.272: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
*emWeb: Dec 06 08:23:25.462: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
*emWeb: Dec 06 08:23:25.463: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
*emWeb: Dec 06 08:23:25.464: 1c:65:9d:a4:ea:b6 Central Switch = FALSEPlease upgrade the WLC
-
just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????
Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express. -
TS4268 Android users can't receive my text messaging but their not able to get mine.
Android users can't receive my text messaging but their not able to get mine. Please help.
It isn't your issue, it is his. He needs to make sure he has turned of iMessage and removed his number from the iMessage database. If he does not still have the device, he needs to contact Apple Care to take care of it.
-
Not able to get the data on the page
hi,
I tried brining the data on the JSP page. I am passing the parameters to a PL/SQL procedure. but I am not getting any data or error. can anyone helpme how to proceed further I am retreving the page parameters that are passed to the JSP page like this.
<%
PortletRenderRequest portletRequest = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
RenderContext rc = portletRequest.getRenderContext();
PortletDefinition pd = portletRequest.getPortletInstance().getPortletDefinition();
%>
I am getting the page parameters. but I am not able to get any result on the page.
while I am using the same code to get the data on another JSP page I am getting the data except I am not retreving the page parameters.
I am using the code like this to pass the parameters to the procedure.
OracleConnection conn__OCI = cpool.getProxyConnection(OracleOCIConnectionPool.PROXYTYPE_USER_NAME, proxUserProp);
cstmt = conn__OCI.prepareCall ("begin test.test1( ?,?,?,?,? ); end;");
cstmt.setString(2, cnumb);
cstmt.setString(3, cperiod);
cstmt.setInt(4, retStrC);
cstmt.setString(5, retStr3);
cstmt.registerOutParameter (4, Types.NUMERIC);
cstmt.registerOutParameter (5, Types.VARCHAR);
cstmt.registerOutParameter(1, OracleTypes.CURSOR);
cstmt.execute();
retStrC = cstmt.getInt (4);
retStr3 = cstmt.getString (5);
retStr = "<tr class=OraDataText><td> " + retStrC + "</td></tr>";
retStr = retStr + "<tr class=OraDataText><td> " + retStr3 + "</td></tr>";
if ( retStrC == -1 ) { ALLretStr = ALLretStr + retStr; }
else
cursor = ((OracleCallableStatement)cstmt).getCursor(1);
while (cursor.next ())
if (spacerLine >= 2)
ALLretStr = ALLretStr + "<tr><td colspan=5 height=1 <div id=ssubLine> <div id=ssubLinet></div> </div> </td></tr>";
ALLretStr = ALLretStr + "<tr class=smmjWipAltText><td ALIGN=LEFT>" + cursor.getString(1) + "</td><td ALIGN=CENTER>" + cursor.getInt(2) + "</td><td ALIGN=CENTER>" + cursor.getString(3) + "</td><td ALIGN=CENTER>" + cursor.getString(4) + "</td><td ALIGN=RIGHT>" + cursor.getString(5) + "</td></tr>";
spacerLine++;
}Hi Frank,<br>
<br>
I am getting a blank page after hitting the submit button. can you help me finding a solution for this in the JSP page or tell me where the error is. <br>
<br>
<%@page contentType="text/html;charset=UTF-8" %><br>
<%@page import="oracle.portal.provider.v2.render.*" %><br>
<%@page import="oracle.portal.provider.v2.render.PortletRenderRequest" %><br>
<%@page import="oracle.portal.provider.v2.PortletDefinition" %><br>
<%@page import="oracle.portal.provider.v2.http.HttpCommonConstants" %><br>
<%@page import="java.sql.*, javax.sql.*, java.util.*, oracle.jdbc.*, <br>
oracle.jdbc.pool.*, oracle.jdbc.oci.*" %><br>
<br>
<%<br> PortletRenderRequest portletRequest = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);<br>
RenderContext rc = portletRequest.getRenderContext();<br>
PortletDefinition pd = portletRequest.getPortletInstance().getPortletDefinition();<br>
%><br>
<%! String tree_descrip;<br> String tree_descrip_long;<br>
String curr_Scheme;<br>
String overl_gif;<br>
String curr_css_path;<br>
// page param<br>
String p_number_val= "1";<br>
String p_period_val= "Day";<br>
%><br>
<%<br> String long_desc = "LONG";<br>
String Descrip = "SHORT";<br>
String treeDescrip= "%SUBMISS%OLDER%";<br>
String curr_treeCateg = "SUB";<br>
try<br>
{<br>
curr_Scheme = getInfo.getSchem.getSchem();<br>
overl_gif = "/images/tested/"+curr_Scheme+ "images/prefreshdefault.gif";<br>
curr_css_path = "/images/tested/" curr_Scheme "css/param_jsp.css";<br>
tree_descrip = getInfo.getPortletTitle.getPortletTitle ( Descrip , treeDescrip , curr_treeCateg);<br>
tree_descrip_long = getInfo.getPortletTitle.getPortletTitle ( long_desc , treeDescrip , curr_treeCateg);<br>
}<br>
catch(Exception e)<br>
{<br>
tree_descrip = "";<br>
tree_descrip_long = "";<br>
}<br>
%> <br>
<% // Get page param p_number_val try { p_number_val = request.getParameterValues("p_number")[0]; } catch(Exception e) { p_number_val = "1"; } <br>
// Get page param p_period_val try { p_period_val = request.getParameterValues("p_period")[0]; } catch(Exception e) { p_period_val = "Day"; } %> <br>
<HTML> <HEAD> <link href="<%= curr_css_path %>" rel="stylesheet" type="text/css" media='' screen=''/> <SCRIPT LANGUAGE="JavaScript1.1" SRC="/images/smmj_page_obj/Popup/overlib.js"></SCRIPT> </HEAD> <BODY>
<TABLE WIDTH=100% summary="<%= tree_descrip %>" border="0" cellspacing="0" cellpadding="3" BGCOLOR="#FFFFFF" > <TR WIDTH="100%" height="6px"><td height="6px" COLSPAN="6" ></td></TR> <TR WIDTH="100%" > <td ALIGN="LEFT" nowrap ></td> <td ALIGN="LEFT" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS"> CYCLE NAME</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">ID</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">FIRM NAME</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">BILLING PERIOD</td> <td ALIGN="RIGHT" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS0">AGE</td> </TR> <%= getOlderSubs( p_number_val, p_period_val , "dev", portletRequest.getUser().getName(), "close_connect") %> </table> <TABLE><TR><TD> <%=p_number_val%>
<%=p_period_val%> <br>
<%=portletRequest.getUser().getName()%> </TD></TR> </TABLE> </BODY> </HTML> <br>
<%!<br> private String getOlderSubs( String cnumb, String cperiod, String cstring, String userid, String cState) throws SQLException
{<br>
CallableStatement cstmt;<br>
ResultSet cursor;<br>
int spacerLine = 1;<br>
int retStrC = 1;<br>
String retStr = "f";<br>
String retStr2 = "f";<br>
String retStr3 = "f";<br>
String retStr4 = "f";<br>
String ALLretStr = " ";<br>
String TempretStr = " ";<br>
String userstring = getInfo.getPortlUser.getPortUsr("B", "1");<br>
String pwstring = getInfo.getPortlUser.getPortUsr("B", "2");<br>
String CNNstring = getInfo.getPortlUser.getPortUsr("B", "3");<br>
String PROXY_user_name = "test$" + userid;<br>
//String PROXY_user_name = "test1$roger" ;<br>
String url= "jdbc:oracle:oci:@" + CNNstring;<br>
Properties prop = new Properties();<br>
try {<br>
if ( userid.trim().toUpperCase().equals(getInfo.getCONN.chkPortal.trim().toUpperCase()) )<br>
{<br>
ALLretStr = "<tr><td>Default user: " + userid + "</td></tr>"; }<br>
else<br>
{<br>
// Create an OracleOCIConnectionPool instance with default configuration
OracleOCIConnectionPool cpool = new OracleOCIConnectionPool(userstring, pwstring , url, null);<br>
Properties proxUserProp = new Properties();<br>
proxUserProp.setProperty(OracleOCIConnectionPool.PROXY_USER_NAME, PROXY_user_name);<br>
OracleConnection conn__OCI = cpool.getProxyConnection
(OracleOCIConnectionPool.PROXYTYPE_USER_NAME, proxUserProp);<br>
cstmt = conn__OCI.prepareCall ("begin PORT_CURSOR.s_submission_wip( ?,?,?,?,? ); end;");<br>
cstmt.setString(2, cnumb);<br>
cstmt.setString(3, cperiod);<br>
cstmt.setInt(4, retStrC);<br>
cstmt.setString(5, retStr3);<br>
cstmt.registerOutParameter (4, Types.NUMERIC);<br>
cstmt.registerOutParameter (5, Types.VARCHAR);<br>
cstmt.registerOutParameter(1, OracleTypes.CURSOR);<br>
cstmt.execute();<br>
retStrC = cstmt.getInt (4);<br>
retStr3 = cstmt.getString (5);<br>
retStr = "<tr class=OraDataText><td> " + retStrC + "</td></tr>";<br>
retStr = retStr + "<tr class=OraDataText><td> " + retStr3 + "</td></tr>";<br>
if ( retStrC == -1 ) { ALLretStr = ALLretStr + retStr; }<br>
else<br>
{<br>
cursor = ((OracleCallableStatement)cstmt).getCursor(1);<br>
while (cursor.next ())<br>
{<br>
if (spacerLine >= 2)<br>
{<br>
ALLretStr = ALLretStr + "<tr><td ALIGN=LEFT nowrap ></td><td colspan=5 height=1 ></td></tr>";<br>
}<br>
ALLretStr = ALLretStr + "<tr WIDTH=100% class=smmjPort2Text >
<td ALIGN=LEFT nowrap ></td><td ALIGN=LEFT> " + cursor.getString(1) + "</td><td ALIGN=CENTER>" + cursor.getInt(2) + "</td><td ALIGN=CENTER>" + cursor.getString(3) + "</td><td ALIGN=CENTER>" + cursor.getString(4) + "</td><td ALIGN=RIGHT>" + cursor.getString(5) + "</td></tr>";<br>spacerLine++;<br>
}<br>
}<br>
if (cState != null )<br>
{ //return(retStr);<br>
if (conn__OCI != null) conn__OCI.close();<br>
if (cpool != null) cpool.close();<br>
}}<br>
return(TempretStr);<br>
}<br>
catch (SQLException e )<br>
{<br>
String retErrStr = retStr + " SQL Error: <PRE> " + e + " </PRE> \n";<br>
return(retErrStr);<br>
}<br>
}<br>
%><br>
Regards,<br>
Vijay. -
Not able to get the connection to mssql server thro native sql
Dear Experts,
I have created a database connection to mssql server thro DBCO t.code.Am not able to get the connection when i am executing Native SQl for geting connection of mssql server.
DATA: CON_NAME LIKE DBCON-CON_NAME VALUE 'BIW'.
EXEC SQL.
CONNECT TO :con_name AS 'C1'
ENDEXEC.
Am always getting sy-subrc = 4. The user name and password i have given in dbcon table having full authorization to access mssql database. I am working SAP ecc 5.0. Also both servers are running in windows.
could anyone hlep me on this issue.
Thanks in advance.Hello, the submitted error must be analyzed according to the Syntaxis and characteristics of the MSSQL database. See explanation of error.
http://doc.ddart.net/mssql/sql2000/html/trblsql/tr_reslsyserr_1_1o1i.htm
Error 156
Severity Level 15
Message Text
Incorrect syntax near the keyword '%.*ls'.
Explanation
This error indicates that the syntax of a Transact-SQL statement is incorrect and that the syntax error was detected near the keyword specified in the error message. The most frequent causes for syntax errors are misspellings of Transact-SQL keywords or operators, and specifying the syntax of a Transact-SQL statement in the wrong order.
One of the more complicated causes for this error may be a compatibility level mismatch for the current database. If the current database has a compatibility level other than 70, Microsoft® SQL Serveru2122 will not recognize any of the keywords that a database with a compatibility level of 70 would recognize.
Action
First, check the Transact-SQL statement syntax near the keyword specified in the error message. Because Transact-SQL language syntax can be very complex, SQL Server may incorrectly report the position of the syntax error as later in the Transact-SQL statement than it actually occurred. Second, reexamine the entire Transact-SQL statement that generated the error. Verify the syntax order of the statement.
Ensure that the database does not have a compatibility level of 65 and has a compatibility level of 70. -
Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group. Through this memberof class I am trying to find full qualified name(DN) of my group.
code I have used:
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(CN=Username))";
//Specify the Base for the search
String searchBase = "";
Also I have used,
String searchFilter = "(&(objectClass=user)(CN=Username))";
//Specify the Base for the search
String searchBase = "ou=ibmgroups,o=ibm.com";
But in both cases I am getting value for Total groups as 0.
Code Reference:
* memberof.java
* December 2004
* Sample JNDI application to determine what groups a user belongs to
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
public class memberof {
public static void main (String[] args) {
Hashtable env = new Hashtable();
String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
String adminPassword = "XXXXXXX";
String ldapURL = "ldap://mydc.antipodes.com:389";
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
//set security credentials, note using simple cleartext authentication
env.put(Context.SECURITY_AUTHENTICATION,"simple");
env.put(Context.SECURITY_PRINCIPAL,adminName);
env.put(Context.SECURITY_CREDENTIALS,adminPassword);
//connect to my domain controller
env.put(Context.PROVIDER_URL,ldapURL);
try {
//Create the initial directory context
LdapContext ctx = new InitialLdapContext(env,null);
//Create the search controls
SearchControls searchCtls = new SearchControls();
//Specify the search scope
searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(CN=Andrew Anderson))";
//Specify the Base for the search
String searchBase = "DC=antipodes,DC=com";
//initialize counter to total the group members
int totalResults = 0;
//Specify the attributes to return
String returnedAtts[]={"memberOf"};
searchCtls.setReturningAttributes(returnedAtts);
//Search for objects using the filter
NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
//Loop through the search results
while (answer.hasMoreElements()) {
SearchResult sr = (SearchResult)answer.next();
System.out.println(">>>" + sr.getName());
//Print out the groups
Attributes attrs = sr.getAttributes();
if (attrs != null) {
try {
for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
Attribute attr = (Attribute)ae.next();
System.out.println("Attribute: " + attr.getID());
for (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
System.out.println(" " + totalResults + ". " + e.next());
catch (NamingException e) {
System.err.println("Problem listing membership: " + e);
System.out.println("Total groups: " + totalResults);
ctx.close();
catch (NamingException e) {
System.err.println("Problem searching directory: " + e);
Any help will be highly appreciated.Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group. Through this memberof class I am trying to find full qualified name(DN) of my group.
code I have used:
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(CN=Username))";
//Specify the Base for the search
String searchBase = "";
Also I have used,
String searchFilter = "(&(objectClass=user)(CN=Username))";
//Specify the Base for the search
String searchBase = "ou=ibmgroups,o=ibm.com";
But in both cases I am getting value for Total groups as 0.
Code Reference:
* memberof.java
* December 2004
* Sample JNDI application to determine what groups a user belongs to
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
public class memberof {
public static void main (String[] args) {
Hashtable env = new Hashtable();
String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
String adminPassword = "XXXXXXX";
String ldapURL = "ldap://mydc.antipodes.com:389";
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
//set security credentials, note using simple cleartext authentication
env.put(Context.SECURITY_AUTHENTICATION,"simple");
env.put(Context.SECURITY_PRINCIPAL,adminName);
env.put(Context.SECURITY_CREDENTIALS,adminPassword);
//connect to my domain controller
env.put(Context.PROVIDER_URL,ldapURL);
try {
//Create the initial directory context
LdapContext ctx = new InitialLdapContext(env,null);
//Create the search controls
SearchControls searchCtls = new SearchControls();
//Specify the search scope
searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(CN=Andrew Anderson))";
//Specify the Base for the search
String searchBase = "DC=antipodes,DC=com";
//initialize counter to total the group members
int totalResults = 0;
//Specify the attributes to return
String returnedAtts[]={"memberOf"};
searchCtls.setReturningAttributes(returnedAtts);
//Search for objects using the filter
NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
//Loop through the search results
while (answer.hasMoreElements()) {
SearchResult sr = (SearchResult)answer.next();
System.out.println(">>>" + sr.getName());
//Print out the groups
Attributes attrs = sr.getAttributes();
if (attrs != null) {
try {
for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
Attribute attr = (Attribute)ae.next();
System.out.println("Attribute: " + attr.getID());
for (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
System.out.println(" " + totalResults + ". " + e.next());
catch (NamingException e) {
System.err.println("Problem listing membership: " + e);
System.out.println("Total groups: " + totalResults);
ctx.close();
catch (NamingException e) {
System.err.println("Problem searching directory: " + e);
Any help will be highly appreciated. -
Not able to get data while executing in background for mb52
Dear all,
my requirement is i want to schedule the zreport for every 1 hour.but proble is when iam executing in fore ground iam able to get data.but when iam going to scheduling this iam not able to get data.
my code is
type-pools:slis.
data zbudat type RANGE OF budat.
data wab like line of zbudat.
data zmatkl type RANGE OF MATKL.
data waz like line of zMATKL.
data zwerks type RANGE OF werks.
data wax like line of zwerks.
waz-sign = 'I'.
waz-low = 'CRUDE'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
waz-sign = 'I'.
waz-low = 'SGO'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
*waz-sign = 'I'.
*waz-low = 'FINES'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'LUMPS'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'UFO'.
*waz-option = 'EQ'.
*append waz to zmatkl.
wax-sign = 'I'.
wax-low = 'BIMI'.
wax-option = 'EQ'.
append wax to zwerks.
clear wax.
wax-sign = 'I'.
wax-low = 'BIPL'.
wax-option = 'EQ'.
append wax to zwerks.
*waz-sign = 'I'.
waz-low = 'C'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'S'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'UC'.
*waz-option = 'CP'.
*append waz to zmatnr.
*waz-sign = 'I'.
waz-low = 'F'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'L'.
*waz-option = 'CP'.
*append waz to zmatnr.
types:begin of w_tab,
bwkey type werks_d,
matnr type matnr,
lgort type LGORT_D,
budat type budat,
labst type labst,
endmenge type p decimals 3,
end of w_tab.
DATA : IT_TAB TYPE STANDARD TABLE OF W_TAB WITH HEADER LINE .
FIELD-SYMBOLS: <gt_fieldcat> TYPE slis_fieldcat_alv,
<gt_report_list> TYPE w_tab .
field-symbols <lt_pay_data> type any table.
*FIELD-SYMBOLS : <LT_DATA> LIKE LINE OF IT_TAB .
FIELD-SYMBOLS : <LT_DATA> type any . " i have chaged it
data lr_pay_data type ref to data.
cl_salv_bs_runtime_info=>set( exporting display = abap_false
metadata = abap_false
data = abap_true ).
****SUBMIT ZQM_GR_BARGE_LOADING WITH S_date in zbudat with s_werks in zwerks with p_pend = ' ' AND RETURN .
submit RM07MLBS with MATKLA in zmatkl with werks in zwerks
"with XVBST = 'X'
using selection-SCREEN '1000' and return.
try.
cl_salv_bs_runtime_info=>get_data_ref( importing r_data = lr_pay_data ).
assign lr_pay_data->* to <lt_pay_data>.
catch cx_salv_bs_sc_runtime_info.
message `Unable to retrieve ALV data` type 'E'.
endtry.
cl_salv_bs_runtime_info=>clear_all( ).
data: obj_s type ref to ZKMINCO_MINESTOCKFROM_SAP_OUT.
create OBJECT obj_s.
data : output TYPE ZKMINMINESTOCKFROM_SAP1 ,
record type ZKMINMINESTOCKFROM_SAP_REC_TAB ,
wa_record like line of record.
LOOP AT <lt_pay_data> ASSIGNING <LT_DATA>.
MOVE-CORRESPONDING <LT_DATA> TO IT_TAB .
APPEND IT_TAB .
wa_record-STOCK_AS_ON_DATE = sy-datum .
wa_record-STOCK_AS_ON_TIME = sy-uzeit .
wa_record-PLANT_ID = it_tab-bwkey.
wa_record-STORAGE_LOC_ID = it_tab-lgort .
wa_record-MATERIAL = it_tab-matnr .
wa_record-STOCK_QTY = it_tab-labst.
append wa_record to record.
clear wa_record.
endloop.
output-MINESTOCKFROM_SAP-record = record .
CALL METHOD obj_s->MINESTOCKFROM_SAP_OUT
EXPORTING
output = output .
commit work.
Thanks in advance.Hi,
I assume that in your case you have two program lets say ZFOREGROUND and ZBACKGROUND (Called inside zforeground using submit statement)
zforeground has :
1. a input field to browse excel sheet or some file at the selection screen, and
2. button 'post all' to determine the background processing.
Now your requirement is such that you want zbackground to get scheduled as background job when post all button is clicked.
So, within the event AT USER-Command, check the sy-ucomm as that of post all button, if so write the following code to schedule the job:
DATA: jobname LIKE tbtcjob-jobname.
DATA :jobcount LIKE tbtcjob-jobcount,
host LIKE msxxlist-host.
DATA: BEGIN OF starttime.
INCLUDE STRUCTURE tbtcstrt.
DATA: END OF starttime.
DATA: starttimeimmediate LIKE btch0000-char1.
DATA: gv_job_dt TYPE sy-datum,
gv_job_tm TYPE sy-uzeit.
jobname = 'EXCLUSION_LISTING'.
gv_job_dt = sy-datum.
gv_job_tm = sy-uzeit.
Job open
CALL FUNCTION 'JOB_OPEN'
EXPORTING
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
IF sy-subrc NE 0.
"error processing
ENDIF.
Insert process into job
SUBMIT ZBACKGROUND AND RETURN
WITH p_file1 = gv_file_cust_exc "<----
Parameters which you want to pass to report zbackground from the report
WITH p_file2 = gv_file_win_deal "------zforeground
USER sy-uname
VIA JOB jobname
NUMBER jobcount.
IF sy-subrc ne 0.
"error processing
ENDIF.
Close job
starttime-sdlstrtdt = gv_job_dt.
starttime-sdlstrttm = gv_job_tm.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
EXCEPTIONS
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
OTHERS = 99.
IF sy-subrc EQ 0.
WRITE:/1 'JOB' COLOR 3,
jobname COLOR COL_GROUP,
'Scheduled in Background' COLOR 3. "error processing
gv_time = starttime-sdlstrttm.
gv_date = starttime-sdlstrtdt.
ENDIF.
Above code will schedule the report zbackground in background.
Note:
the program schduled in background will not be able to access any data present on your presentation server. data should be provided either by the program schhedulling it in foreground or it has to be thr in application server.
Regards,
Ravi -
NOt able to get text value for 0calmonth in the query
hi,
I am not able to get the test for the calmonth in the selection screen of the Query.
i.e If the user enter the value 01/2010 as input in the selection screen. I am not able to get its text Janurary 2010 displayed in the selection screen of the query.
please let me know what could be the reason for this.
regards,
MaheshHi Mahesh,
I regret to inform you there is no option to display the month text.
The system works as designed. The "Key and text" option for the
infoObject is for display the technical name and the description.
I found a customer on SDN which the same doubt and the answer for your
question. Please, check the link below:
0calday text variable
Best Regards,
Des -
User not able to run a report.
Report Server has encountered a SharePoint error. (rsSharePointError) Cannot open database "dbname" requested by the login. The login failed. Login failed for user . For more information about this error navigate to the report server on the local
server machine, or enable remote errorsHi Kunal, here are a few links that might point you in the right direction:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/cca6cb99-c86d-4ba6-b6b9-81ec88771aa8/users-not-able-to-see-the-published-reports?forum=sqlreportingservices
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/c6c1414c-c338-4222-a5ca-a554d3ad912c/problem-getting-some-users-to-be-able-to-run-reports-probably-security-of-some-sort?forum=sqlreportingservices
http://gj80blogtech.blogspot.com/2010/07/ssrs-error-report-server-has.html
http://support.microsoft.com/default.aspx?scid=kb;EN-US;2597014
cameron rautmann -
I tried to update the latest update 1/27/14 and it ran into a problem. I am not able to get to my library. I tried to download Itunes and it won't work . What should I do?
Are you sure it was error 0604 since I never heard of that error, it does not appear in the list of errors in the following and a search of Apple's support site gets no hits. However, error 1604 is list and users have reported that error number. If 1604 is the error number the following tell yu wnat to do when you click on that error number:
iOS: Resolving update and restore alert messages -
After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off. has anyone else had this problem with it being "stuck"?
Basics from the user guide have always been, and still remain, restart, reset, restore from backup, restore as new.
-
Not able to get which row is edited in alv grid
Hi,
I have created a Editable alv grid .
My grid does not contain line selection cloumn so How can I get to know which row is to be changed.
I am using get_selected_rows method but not able to get which row is changed. please help on this.
Thanks in advance.Hi,
check this ..
it_ekko1[] = it_ekko[].
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_user_command = 'USER_COMMAND'
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_events = i_events
i_save = 'X'
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
In user command you need to write logic to know which all records have changed.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
loop at it_ekko into wa_ekko.
read table it_ekko1 into wa_ekko1 index sy-tabix.
if wa_ekko <> wa_ekko1.
write your logic further
endif.
endloop.
endcase.
Regards,
Srini. -
Not able to get the data in COSB Table
Hi Colleagues,
I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
But still not able to get the data in COSB table.
Could you please suggest me the steps and process, Might be i have missed something..
Thanks in Advance
Regards
NitinHi Ken,
I have below mentioned requirement
COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
Please let me know as Functional prospect what I have to do to bring this values in COSB table.
Regards
Nitin
Maybe you are looking for
-
How to determine if "File in use"
How can I determine if a file is currently being 'used' that would prevent me from copying over the file. I would like to be able to determine who is using this file (win id). As a test i tried the following and got an error as expected: PS C:\src> m
-
I watched a Tom krcha video tutorial on rtmfp using cirrus or stratus. I copyed the code he used just has an experiment really in Flash Builder 4.6. For some reason though, it didn't work for me even though its the same code that was in the video tut
-
Nokia 2730 classic camera & flash video play
Hello, Please solve my three queries regarding 2730 classic as follows: 1. Its camera is 2.0 mega pixel, but its clarity is not good as 2700 classic or 5233 both of them are 2.0 megapixel phones. and its pi
-
Does Elements 3 not support 14 bit images?
I just purchased a Nikon V ED scanner so that I could start digitizing my 4000 or so analog images. As I've begun my first experiments I started noticing that sometimes when I scan an image and then open it in in Elements, the majority of the tools d
-
FROM DVD DIRECTLY TO MPEG-4 IN ONE STEP?
FROM DVD DIRECTLY TO MPEG-4 IN ONE STEP? is there like a program that could rip and convert dvds to moeg4 with like ONE program??